Fall Arrest - Eiva-Safex

WORK
RESTRAINT
1. Anchor
2. Connector
3. Harness
4. Training
Attachment Sling
Suitable for:
All Industry
Sectors
The attachment sling is the simplest way to create
an anchorage point on a suitable structural
element. The round sling construction allows it to
be used in a number of confi gurations when
placing it around the structure. The continuous
polyester sleeve around the product protects the
load bearing fi bres and makes it simpler to inspect
than traditional webbing or wire rope slings. This
product offers a factor of safety of 7:1 and is
available in a range of sizes.
Order Code: ATSL 1M EWL
SAFELINE System
Suitable for:
Roof Work
Facilities
Maintenance
In situations such as roofs where the operative
needs to access a large area, or negotiate a
number of fall hazards while gaining access to
a task, a running anchorage line can be a useful
solution. Permanently fi xed running anchorage
lines allow the user more freedom of movement,
while still working within a clearly defi ned
system access zone. These systems are tested to
withstand the forces of a fall, but are more
commonly planned, designed and installed to
create a Work Restraint access system.
Order Code: SAFELINE
STOPPA
Suitable for:
Vehicle Fall
Protection
Containerised
Generators
The Stoppa system is a pre installed restraint
system for access to the top of containerised
units and vehicles. The system is designed to be
permanently installed to the structure, with the
dimensions specifi c to the installation. Once
installed a worker only requires the Stoppa Belt
to utilise the system and the fi xed dimensions
prevent the user from compromising their safety.
The system allows the user free access to all
intended areas without access to any fall
hazards
Order Code: STOPPA
26