pdf brochure - Hitachi Construction Machinery Europe

ZW75
40°
45°
G
F C
I
L
J
40°
H
K
N
B
H'
E
M
A
D
Lift arm
Standard lift arm with quick-coupler
Bucket type
General purpose
Light material handling
With bolt-on teeth
With bolt-on teeth
Bucket capacity
ISO heaped m 3 0.85 1.05
ISO struck m 3 0.7 0.85
A Overall length mm 5 355 5 380
B Overall height, bucket on ground mm 2 490 2 490
C Width over tires mm 1 760 1 760
D Wheel base mm 2 050 2 050
E Ground clearance mm 320 320
F Tread mm 1 400 1 400
G Bucket width mm 1 800 1 800
H Turning radius (centerline of outside tire) 3 515 3 515
H' Loader clearance circle, bucket in carry position mm 4 185 4 195
I Overall operating height mm 4 090 4 140
J Height to hinge pin, fully raised mm 3 200 3 200
K Dump clearance 45 degree, full height mm 2 500 2 485
L Reach, 45 degree dump, full height mm 775 790
M Digging depth (horizontal digging angle) mm 95 95
N Max. tilt back at carry position deg 50 50
Static tipping load *
straight kgf 3 880 3 845
Full 40 degree turn kgf 3 305 3 270
Breakout force
kN
(kgf)
42.3 40.7
Operating weight * kg 5 340 5 365
WITH FORK ATTACHMENT
O
P
R
Q
S
Attachment type
Standard lift arm with quick-coupler
Fork
O Max. stacking height mm 3 005
P Height of forks at maximum reach mm 1 355
Q Reach at ground level mm 880
R Max. reach mm 1 320
S Reach at max. stacking height mm 560
Static tipping load *
straight kgf 2 955
Full 40 degree turn kgf 2 520
Max. payload per EN 474-3, 80% kg 2 015
Max. payload per EN 474-3, 60% kg 1 510
Fork tine length mm 1 200
Operating weight kg 5 300
Notes: 1. All dimensions, weight and performance data based on ISO 6746-1:1987, ISO 7131:1997 and ISO 7546:1983
2. Static tipping load and operating weight marked with * include 365/70R18 tires (no ballast) with lubricants, coolant, full fuel tank and
operator.
Machine stability and operating weight depend on counterweight, tire size and other attachments.
17