then try Mistic Metal Mover II I - Lenco Welding Accessories Ltd.

LENCO WELDING ACCESSORIES LTD. SECTION 800
Saves you time, tools and money !
If you're looking for
Performance as well as
something SAFE - then try
Mistic Metal Mover II
IT'S SAFE, YET PERFORMS !
Cleans with soap and water - no solvents required.
MISTIC METAL MOVER II gives you the ultimate
edge in working with all kinds of metals and alloys -
its unique lubricating formula makes all your tooling
and machining operations easier by reducing surface
friction and eliminating galling and tearing of material
while lengthening tool life. It allows working to closer
tolerances, and leaves an ultra smooth finished surface.
Ordering Information:
Part No. Description # / Case Weight / Case
MM-16 1 Pint Can 12 16 lbs.
MM-1G 1 Gallon Can 2 19 lbs.
MM-5G 5 Gallon Can 1 42 lbs.
MM-55G 55 Gallon Drum 445 lbs.
Original formula also available, call for information.
This high performance cutting and tapping fluid can
be used for a wide variety of metalwork operations
including drilling, tapping, honing, boring, milling,
broaching, sawing, threading, turning or filling.
MISTIC METAL MOVER II DOES NOT CONTAIN:
• 1.1.1 Trichloroethane
• Chlorinated Paraffins
• Solvents, Water or Sulphur
• Inactive Fillers
• Mineral or Petroleum Oils
Health
MISTIC METAL MOVER II IS:
• Environmentally Friendly
• Water Washable
•Bio-degradable
• The SAFE Performance Fluid For All Your Needs
Fire
0
2 0
HMIS
Reactivity
Health
Fire
0
1 0
NFPA
Reactivity
© October 1996
CUTTING FLUIDS PAGE 1

SECTION 800
LENCO WELDING ACCESSORIES LTD.
Saves you time, tools and money !
Lubricant for working with
Aluminum, Brass,
Bronze, Copper and Plastics.
An Outstanding Tapping Fluid
Non-Toxic
Easily cleaned with vapour de-greasing,
or simply with strong detergent.
CUTTING FLUIDS PAGE 2
Ordering Information:
Part No. Description # / Case Weight / Case
AL-16 1 Pint Can 12 16 lbs.
AL-1G 1 Gallon Can 2 18 lbs.
AL-5G 5 Gallon Can 1 42 lbs.
AL-55G 55 Gallon Drum 435 lbs.
Among The Many Alumicut Users:
• kimberly-clark
• NASSCO
• NCR
• Reynolds Aluminum
• TVA
• U.S. Navy
• Your Customers... (hopefully soon !)
ALUMICUT ® is a superior lubricant for working with
aluminum, as well as working with brass, bronze, mild
steel, copper and plastics. Formulated especially for
non-ferrous materials, it forms an effective extremepressure
lubricating boundary between tool and work
surface, making otherwise difficult operations a breeze.
This versatile lubricant can be used for drilling, tapping,
threading, broaching, punching, grinding, stamping
and forming... and many, many other tooling operations
of shop or industry. Its effectiveness allows
precision machining of all types of materials - from 3003
all the way up to 6061 !
ALUMICUT eliminates galling, gouging and tearing of
material, plus instantly stops metal chip pile-up on tools
and extends tool life considerably. Even use with belt
sanders increases the life of the belt five times. It allows
for machining to closer tolerances, and leaves an
ultra smooth finished work surface which requires only
ordinary cleaning in preparation for subsequent
processing steps.
ALUMICUT can be misted, recycled, and is safe and
easy to use. It is non-toxic and bio-degradable, and
will not cause drying or cracking of skin. It is totally
non-corrosive to aluminum, magnesium, titanium or
steel.
© October 1996