TRON40GPS - Regina

www.jotron.com
5.2 AUTOMATIC OPERATION (FB4/FBH4/FB5/FB6)
1. The Tron 40S MkII will automatically release from the bracket, float to the
surface and start to transmit when the EPIRB, in its bracket is deployed into
water at a depth of app. 2-4 meters (6 - 13 feet).
2. Transmission will continue until the EPIRB is lifted out of the water, and
dried off. The transmission can also be stopped by placing the EPIRB in the
bracket. (If switch is in ”READY” position, otherwise move switch to this position).
5.3 TEST
To perform the self-test, the EPIRB has to be removed from the bracket.
FB4 bracket: Remove EPIRB from the bracket by pulling out the locking pin on
the clamp and open the retaining rod that holds the beacon.
FB6/FB5 bracket: Release top cover by removing the locking split pin and special
washer.
26
82819_UM_40SMkII_J