We express Acrylics rich in color and texture. - Dental Supplies
We express Acrylics rich in color and texture. - Dental Supplies
We express Acrylics rich in color and texture. - Dental Supplies
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
2. Indirect Method:<br />
Provisional Teeth with Self-polymeriz<strong>in</strong>g NOVACRYL®<br />
Build the NOVACRYL® veneers <strong>in</strong> a cl<strong>in</strong>ical model <strong>in</strong> plaster;<br />
Carve the bridge area <strong>and</strong> the support<strong>in</strong>g teeth at approximately 0.5 mm, similarly to a tooth preparation for a crown of a greater<br />
diameter. The edentulous spaces <strong>and</strong> the support<strong>in</strong>g teeth will be replaced later by acrylic veneers. Isolate with plaster-to-acrylic<br />
separator NOVAFOIL <strong>and</strong> condition the acrylic veneers <strong>in</strong> the cl<strong>in</strong>ical model. Select the adequate NOVACRYL® powder.<br />
Preparation of Acrylic Dough:<br />
Prepare a volume unit of acrylic dough <strong>in</strong> a dappen dish by mix<strong>in</strong>g three parts of Self-polymeriz<strong>in</strong>g NOVACRYL® powder + one<br />
part of Self-polymeriz<strong>in</strong>g NOVACRYL ® liquid. The mix<strong>in</strong>g is cont<strong>in</strong>ually made crosswise with a spatula dur<strong>in</strong>g 30 seconds<br />
approximately <strong>in</strong> order to ensure the complete <strong>in</strong>corporation of polymer <strong>and</strong> monomer particles. Avoid air <strong>in</strong>corporation <strong>in</strong>to the<br />
dough. Close the conta<strong>in</strong>er to avoid the dry<strong>in</strong>g of material until the acrylic dough reaches its desired consistency<br />
fluid phase.<br />
Pour immediately the dough <strong>in</strong>to the correspond<strong>in</strong>g area <strong>and</strong> be sure to completely cover the area of the support<strong>in</strong>g or abutment tooth.<br />
Cur<strong>in</strong>g<br />
To avoid retention of material <strong>and</strong> before the beg<strong>in</strong>n<strong>in</strong>g of the exothermic reaction, remove <strong>and</strong> place aga<strong>in</strong> several times the acrylic structure <strong>in</strong> the<br />
plaster cast. Let the acrylic structure polymerize <strong>in</strong> the plaster cast.<br />
SHADES<br />
Work Time<br />
This mixture allows a work time from 5 to 6 m<strong>in</strong>utes, accord<strong>in</strong>g to the room temperature of the site.<br />
Polish<strong>in</strong>g<br />
The anatomy <strong>and</strong> contours of the acrylic structure are polished as necessary, accord<strong>in</strong>g to the current techniques <strong>in</strong> practice <strong>in</strong><br />
dental laboratories.<br />
Place carefully the NOVACRYL® veneer on the support<strong>in</strong>g or abutment tooth <strong>and</strong> establish an adequate occlusion.<br />
If adjustment <strong>and</strong> occlusions are satisfactory, cement the NOVACRYL® veneer <strong>and</strong> verify aga<strong>in</strong> the patient's occlusion.<br />
To obta<strong>in</strong> a better characterization of the bridge, use Incisal NOVACRYL® range-<strong>in</strong> <strong>color</strong>s to simulate teeth's enamel.<br />
NOVACRYL® Tooth-coloured: -59, 62, 65, 66, 67, 69, 77, 81 <strong>and</strong> <strong>in</strong>cisal-<br />
Vita ® Shades Type: -A1, A3, A3.5, B2, B3, C3, D3-<br />
Acrylic Res<strong>in</strong>s