FRONT HITCH AND POWER TAKE-OFF FOR JOHN ... - Laforge

The unique experience from LAFORGE and a close collaboration with JOHN DEERE has allowed LAFORGE to create
the GreenLink ® ST 2 front hitch to optimize tractor performance from JOHN DEERE 5020 and 5R tractors
■ Front hitch GreenLink ® ST 2 is perfectly compatible with
JOHN DEERE 5020 and 5R tractors.
■ It is also compatible, when arms are folded, with JOHN
DEERE Front End Loader:
- 531, 533, 583 and 633 (ST 2 - 1800 Kg)
- 551, 583 and 633 (ST 2 - 3000 Kg)
Top link in storage position doesn’t interfere with the loader.
■ The ground clearance and the maneuverability are fully
retained.
Front hitch GreenLink ® ST 2
Technical data GL ST 2
Category 2
Lift capacity at ball end
Lift range
standard
1 800 Kg
(3 968 lbs)
670 mm
option
3 000 Kg
(6 614 lbs)
Front hitch GL ST 2 with JOHN DEERE front end loader
The easy to install LAFORGE front PTO is integrated
in the front frame of the tractor and thus optimize
the front hitch overhang from the front face of the
tractor while matching International standards.
The front PTO, counter iso rotation, 1000 rpm (2
gears / 6 splines), with electro-hydraulic multi-discs,
modulated wet clutch, delivers full continuous load at
maximum tractor capability.
Front Power Take-Off
LAFORGE SARL Ph: 33 323 798 585
Pôle d’Activités Fax: 33 323 798 175
02190 GUIGNICOURT commercial@laforge.fr
(France)
www.laforge.fr
LAFORGE SYSTEM INC Ph: (925) 827 2010 - 1 800 422 5636
4425 C Treat Blvd, Suite 230 Fax: (925) 689 7198
CONCORD - CA 94521
lars@fronthitch.com
(USA)
www.fronthitch.com
The tractor - implement interaction expert