JD 5000 series - Laforge

FRONT HITCHESFRONT POWER TAKE-OFFFOR JOHN DEERE TRACTORS5000 SeriesPHOTO :GL ST3/5E WITHFRONT POWER TAKE-OFFwww.laforge.fr

LAFORGE FRONT HITCHESFor tractors produced in Europe and IndiaGL ST2 - GL ST25/5GWith the GL ST2 and the GL ST25/5G,LAFORGE offers simple and economic fronthitches, compatible with John Deere frontloaders* and LAFORGE front Power Take-Off.Ground clearance and manoeuverabilityare fully retained.Front Hitch GL ST2Standard Equipment• Folding arms• Cat 3 automatic hooks• Tow hook• Top link with storage position• Parallel hydraulic hook up withisolating valveTechnical data GL ST2 GL ST25/5GCategory 2 2Lift capacity1800 Kg3000 Kg1800 Kg3000 KgLift range 670 mm 670 mmFront hitch GL ST25/5G*depending on the modelLAFORGE front hitches are the result of our unique experience, built durA close collaboration with John Deere, has allowed us to

LAFORGE FRONT HITCHESFor tractors produced in the USGL ST3/5E - GL ST3/5M■ GL ST3/5E perfectly compatible with JohnDeere tractors 5E and 5EN.■ GL ST3/5M perfectly compatible with JohnDeere tractors 5M T3 and 5M IT4.Ground clearance and manoeuverability arefully retained.Front hitch GL ST3/5EStandard Equipment• Folding arms• Cat 3 automatic hooks• Tow hook• Top link with storage position• Parallel hydraulic hook up with isolating valveTechnical data GL ST3/5M GL ST3/5ECategories 2 - 3N 2 - 3NLift capacity 3000 Kg 3000 KgLift range 670 mm 670 mmOptional underaxle frame availablefor GL ST3/5M front hitches.Front hitch GL ST3/5Ming more than four decades servicing the needs of the agricultural world.develop front hitches optimizing the use of tractors’ front.

LAFORGE FRONT POWER TAKE-OFFFront PTO - Counter ISO rotationFront PTO - ISO rotationLAFORGE offers a range of autonomous front Power Take-Offwith electro-hydraulic multi-discs, modulated wet clutch.Why choose a LAFORGE front PTO■ Optimised installation on the tractor.■ Easy to install.■ Built according to international standards.■ Driveline and torsional damper, ready toinstall on the tractor.Benefits of the Electrohydraulic System:■ Long lasting■ Autonomous hydraulic circuit, withintegrated pump■ Multi-discs wet clutch andmodulated electro-hydraulic engagement■ In cab On/Off switchTechnical characteristics of the LAFORGE front PTOs■ Driven from engine crankshaft.■ Speed light incorporated in the remote control inside the cab.■ Oil cooler included in base price with 3 gears PTO. Optional with 2 gears PTO.Clockwise rotation seen from the frontISO rotation 3 gears 90 HP 540 RPM 6 splinesISO rotation 3 gearsEnginePower1000 RPM 21 splinesCounter Clockwise rotation seen from the frontCounter ISOrotation2 gearsEnginePower1000 RPM 6 splinesCheck maximum axle load and tire pressure (in relation with travel speed) with John Deere and tire manufacturer.LAFORGE’s responsability is limited to our product. Specifi cation and design subject to change without notice. 02/13Ph: (33) 03 23 79 85 85Fax: (33) 03 23 79 81 75commercial@laforge.frwww.laforge.frLAFORGEPôle d’ActivitésF - 02190 GUIGNICOURTThe tractor-implement interaction expertPEFC / 10-31- 1245