RIGGING - Ultralite

DR8_DL8_DL4 / CONTROLLERS
DR8_DL8_DL4
DR8 8-Channel Radio Control in a 4 rack-unit chassis. With its double operation mode (direct
or radio control), this unit manages – from either a local position or remotely – the movement
of either a single hoist or the synchronous movement of several DC hoists. The ability to
control movements from a distance of up to 200m, simply by using the XRSR8 transmitter
supplied, puts this at the top of the EXE product range.
DL8 e DL4 8-or 4-channel Multilink control unit in a 4 rack-unit chassis. 4- and 8- channel multilink controllers can be either rmaster or slave
units, so they can be used alone, or chained together (up to 10 units max). Thus a system for controlling 64 chain hoists simultaneously could
easily be built using 10 linked DL8 units, controlled by the master unit or remotely controlled via the Stop&Go keypad XRDHG.
DR and DL series controls are available in A and B versions: A versions are for motor overload protection adjustable between 1.6 and
2.5A, while B versions are for motor overload protection adjustable between 4.0 and 6.3A.
26
XC DR8
XR SR8
XC DL8 8-CHANNEL MULTILINK – 4 RACK UNITS
27
XC DL4
8-CHANNEL RADIO CONTROL – 4 RACK UNITS
Includes: XRSR8 transmitter with battery, secondary battery and charger.
Includes: 1 x link cable
4-CHANNEL MULTILINK – 4 RACK UNITS
Includes: 1 x link cable
BASIC-DIRECT CONTROLLER
TECHNICAL DATA
Power:
Power Supply:
Outputs:
Max Load Channel:
Dimensions&Weight:
Dimensions&Weight:
TECHNICAL DATA
XRDHG
XC DR8
6kW for model A - 12kW for model B
1 mobile plug CE 230/400VAC 32A 6H 3P+N+T with
mechanical phase inverter
8 x CE 400VAC 16A 6H 3P+T panel sockets
1 x 0.75kW chain hoist per model A
1 x 1.5kW chain hoist per model B
485x400mm H=187mm on rubber feet; 25kg
XR SR8
175x115x135mm; 1.05kg
XC DL8
XC DL4
Power: 6kW for model A 3kW for model A
12kW for model B 6kW for model B
Power Supply: 1 mobile plug CE 230/400VAC 32A 6H 3P+N+T with
mechanical phase inverter
Outputs: 8 x CE 400VAC 16A 4 x CE 400VAC 16A
6H 3P+T panel sockets 6H 3P+T panel sockets
Max Load Channel: 1 x 0.75kW chain hoist per model A ;
1 x 1.5kW chain hoist per model B
Dimensions:
485x400mm H=187mm on rubber feet
Weight: 25kg 20kg
STOP AND GO KEYPAD FOR DL CONTROLS
Accessory for DL8 and DL4 controls
XCDR8
- MCB & RCD Breaker
- General switch release coil
- LED light indicates presence of line tension
- Emergency Stop mushroom button
- GO button (requires operator to be present)
- 2-position selector to switch between direct and remote control
- 8 x 3-position channel switches (UP-OFF-DOWN)
- 16 x green LED lights indicating channel UP-DOWN preselection
- 8 x independently regulated motor overload protection
- 1 x red LED light indicating “mth cutoff” motor overload protection
- in radio remote control mode, works with XRSR8 transmitter
- 1 x green “radio signal” LED light indicating radio communication is present
XRSR8
- 8-channel transmitter with safety key. It includes 2 batteries
+ a battery charger and a spare safety key.
- START button to activate radio communication with receiver
- Green Led light indicates radio communication ON
- Emergency stop mushroom button
- GO button (requires operator to be present)
- 8 x 3-position channel switches (UP-OFF-DOWN)
XCDL8 _ XCDL4
- MCB & RCD Breaker
- General switch release coil
- LED light indicates presence of line tension
- Emergency Stop mushroom button
- GO button (requires operator to be present)
- 2 position selector to switch between direct and remote control
- 8 (4 for XCDL4) x 3-position channel switches (UP-OFF-DOWN)
- 16 (8 for XCDL4) x green LED lights indicating channel UP-DOWN preselection
- 8 (4 for XCDL4) x independently regulated motor overload protection
- XLR 5-pole OUT Link panel socket
- XLR 3-pole IN Link panel socket
- Link Cable (1m long)
- Can be used with external XRDHG Stop and Go keypad
XRDHG
- Yellow double-isolated keypad in self-extinguishing thermoplastic
material, applied only to XLR 5-pole OUT Link panel socket provided
with the DL controllers
- 1 x Stop mushroom button
- 1 x Go button (requires operator to be present)
- Cable length: 15m
- 1 x flying XLR 5-pole male connector
- 270x90x65mm + cable guard
- Weight: 2kg