Product Specification PATCH PANEL ANTENNA (7.5dBi)

AFC/SFC Coaxial Cables
50ohms, High Foam
Dielectric, Solid Corrugated
Outer Conductor
Connectors for
Corrugated
Coaxial Cables
DESCRIPTION
EMP Protectors
(Arresters)
For Base station
feeder line
INTRODUCTION
AFC & SFC cable will be ideal for
application of Cellular, PCS,
IMT-2000, Broadcast, Military telecom
and radar system, or any other
RF-Coaxial cable requirements.
The cables utilize a high foamed
polythylene dielectric and corrugated
outer conductors made of
longitudinally welded and
corrugated.
The dielectric and inner conductor
are bonded to each other by
pre-coat process and the foamed
dielectric is manufactured by a
process of gas injection giving a
foam with a fine, uniform,
closed cell structure.
Each cable drum delivered by
Amphenol is performed 100%
sweeping test to ensure the lowest
specified return loss value.
Amphenol offers connectors for
corrugated coaxial cable meet
the requirements of multicarrier,
high-channel-count transceivers
as base stations of today's mobile
communication infrastructure
networks.
They offer the many technical
advantages as below.
Low and Stable PIMD
Excellent Return Loss Performance
Quick and Easy Installation
Environment Resistance
Interface type :
7/16 DIN & N type male
& female
Frequency range :
Cellular (800~900MHz)
GSM (890~960MHz)
PCS (1700~1900MHz)
etc (1400~1600MHz)
Radiating Coaxial Cables
For underground Applications
RDAF Series
Radiating cable is very similar in construction to a
coaxial cable except for the slots in the outer conductor
which allow controlled levels of RF energy to be
radiated out-of or into the cable. Therefore,
the radiating cable functions as a great
extension antenna to solve RF coverage problems
in limited area such as tunnels, building and other
underground areas.
RDCL Series
This cable has a thinner, non-corrugated copper
outer conductor with pre-punched holes which is
longitudinally formed around the foam dielectric
covering the inner conductor.
RDCL series offers similar RF performance with
RDAF series at a lower cost, which are used in
application where the ruggedness of the cable
is not required.