Product Specification PATCH PANEL ANTENNA (7.5dBi)

PATCH PANEL
ANTENNA (7.5dBi)
Type No.: PAL -08-0859
Connector: TNC female (50 Ohm)
Frequency range:824-894 MHz
This Patch Antenna is designed for
frequency range of 824-894 MHz
in conjunction with fixed WLL,
would provide good Gain, low VSWR
and better performance.
PATCH PANEL ANTENNA 12dBi
Product Specification
Frequency Range
Connector
VSWR
Gain (Minimum)
Impedance
Polarization
Front to Back Ratio
Horizontal Beam Width
Vertical Beam Width
Size (mm)
Wt. with Mounting
:
:
:
:
:
:
:
:
:
:
:
824-894 MHz
TNC Female
Better than 1.5:1
7.5 dBi
50 ohm
Vertical
Better than 15 dB
78 Degree
60 Degree
210x210x62
0.95 Kg
PATCH PANEL ANTENNA 12dBi
Type No.: PAL -12-0859
Connector : N female (50 Ohm)
Frequency Range : 824-894 MHz
Patch Antenna is designed for frequency range of
824-894 MHz in conjunction with fixed WLL, would
provide good Gain, low VSWR and better performance.
Product Specification
Frequency Range
Connector
VSWR
Gain (Minimum)
Impedance
Polarization
Front to Back Ratio
Horizontal Beam Width
Vertical Beam Width
Size (mm)
Wt. with Mounting
:
:
:
:
:
:
:
:
:
:
:
824-894 MHz
N Female
Better than 1.5:1
12 dBi
50 ohm
Vertical
18 dB
70 Degree
30 Degree
244x524x70
3 Kg
Type No.: PAL -12-1890
Connector : N female (50 Ohm)
Frequency Range : 1880-1900 MHz
Patch Antenna is designed for frequency range
of 1880-1900 MHz in conjunction with Cor-Dect
application gives better performance.
Product Specification
Frequency Range
Connector
VSWR
Gain
Impedance
Polarization
Front to Back Ratio
Horizontal Beam Width
Vertical Beam Width
Size (mm)
Wt. with Mounting
:
:
:
:
:
:
:
:
:
:
:
1880-1900 MHz
N Female
Better than 1.4:1
12 dBi
50 ohm
Vertical
18 dB
67 Degree
20 Degree
125x370x40
1.5 Kg
GPS/GSM DUAL POLARIZED ANTENNAS
Type No. : PAL-27/2-1575/900-1
Mounting : Magnetic Type
Type No. : PAL-27/2-1575/900
Mounting : Mechanical Type
PRODUCT SPECIFICATION
For GPS
For GSM
Frequency : 1575 +/-3 MHz
Frequency : 880 ~960 MHz / 1800/1900 MHz

AFC/SFC Coaxial Cables
50ohms, High Foam
Dielectric, Solid Corrugated
Outer Conductor
Connectors for
Corrugated
Coaxial Cables
DESCRIPTION
EMP Protectors
(Arresters)
For Base station
feeder line
INTRODUCTION
AFC & SFC cable will be ideal for
application of Cellular, PCS,
IMT-2000, Broadcast, Military telecom
and radar system, or any other
RF-Coaxial cable requirements.
The cables utilize a high foamed
polythylene dielectric and corrugated
outer conductors made of
longitudinally welded and
corrugated.
The dielectric and inner conductor
are bonded to each other by
pre-coat process and the foamed
dielectric is manufactured by a
process of gas injection giving a
foam with a fine, uniform,
closed cell structure.
Each cable drum delivered by
Amphenol is performed 100%
sweeping test to ensure the lowest
specified return loss value.
Amphenol offers connectors for
corrugated coaxial cable meet
the requirements of multicarrier,
high-channel-count transceivers
as base stations of today's mobile
communication infrastructure
networks.
They offer the many technical
advantages as below.
Low and Stable PIMD
Excellent Return Loss Performance
Quick and Easy Installation
Environment Resistance
Interface type :
7/16 DIN & N type male
& female
Frequency range :
Cellular (800~900MHz)
GSM (890~960MHz)
PCS (1700~1900MHz)
etc (1400~1600MHz)
Radiating Coaxial Cables
For underground Applications
RDAF Series
Radiating cable is very similar in construction to a
coaxial cable except for the slots in the outer conductor
which allow controlled levels of RF energy to be
radiated out-of or into the cable. Therefore,
the radiating cable functions as a great
extension antenna to solve RF coverage problems
in limited area such as tunnels, building and other
underground areas.
RDCL Series
This cable has a thinner, non-corrugated copper
outer conductor with pre-punched holes which is
longitudinally formed around the foam dielectric
covering the inner conductor.
RDCL series offers similar RF performance with
RDAF series at a lower cost, which are used in
application where the ruggedness of the cable
is not required.

AFC/SFC Jumper
Assemblies and Accessories
High performance Coaxial Cable Assemblies
Amphenol's factory assembled Jumpers are available for
different type of Standard Corrugated and Superflex cables.
Lengths can be offered as per the requirement.
Connectors offered: N and DIN (7/16) Types
The cable assemblies provide outstanding electrical
performance along with high durability for tight routing
and superior environmental sealing for long life reliability.
Accessories
Amphenol offers wide
range of accessories
required installation of
Antenna
Line products.
Cable Grounding
Kits Connector
Grounding Kits
Wall Entry System
Cable Clamps
RF Connectors
SMA Type
SMB, SMC Type
N Type
Amphenol is the world”s largest Manufacturer of RF
Connectors. Our complete range of RF
interconnect products are used in the cellular/
PCS, tele-communications, computer
networking and instrumentation industries.
These include Standard / Miniature connectors
(UHF, Mini -UHF, N, 50 & 75 ohm BNC, and RP-
BNC, Twinaxial, DIN 1.6/5.6, TNC and RP-TNC );
Subminiature connectors (SMA & RP - SMA, SMB, SMC, DIN 1.0/2.3, and
TM
size 8 contacts); MicroMate
corrugated cable connectors.
Microminiature connectors; DIN 7- 16 &
Amphenol offers a full line of semiflex and drop cable connectors to meet the
demanding requirements of HFC broadband infrastructure being developed
by CATV MSOs and telephone companies worldwide.
BNC Type
TNC Type