Our Most Popular Package! - Hyatt's

stencil cutters
Gerber OMEGA TM software will drive any cutter
on this page! See “software” section.
Our
Most
Popular!
GERBER
GS15 TM plus
Cutting Plotters
The GS15plus sprocket plotter uses 15" perforated media
to cut text or graphics up to 13.25 inches in height. The
GS15plus is the most accurate 15” plotter on the market
when using a tangential knife while cutting sandblast materials.
Includes a one-year warranty, accessory kit, blade
holder, blade, pen and roll holder. Made in USA.
T10453 $7,650.00
Allen Datagraph
Model 536 GTS
36-inch Stencil Cutter
The 536 GTS is a dual drive cutter that can utilize either
sprocket drive for heavy sandblast materials, or a friction
drive for more accurate cuts on thinner material. The flexibility
of the 536 GTS permits cutting 10, 12, 15, 18, 21, 25 and
30-inch stencil. An additional benefit is that the 536 GTS cuts
to the edge of the holes on both sides of the material allowing
a 2-OX2-0 die to cut perfectly between the hole punch pattern.
Includes two-year warranty. Made in USA.
T10471 $8,795.00
GERBER GS750 TM plus-M
An industry favorite for over 20-years, the
GS750M withstands the rigors of daily stencil
cutting. Uses 30" perforated materials and can
cut text and graphics up to 27.25" in height.
The GS750 can use either a swivel or tangential-steered
knife blade up to 27.25” in height!
Made in USA.
T10470 $10,495.00
Allen Datagraph
315 GTS
15-inch Cutter
Table-top, high-speed, rugged enough for stencil cutting
of monument designs. Faultless, unattended operation
with on-the-fly adjustable speed and force settings. Fully
compatible with Gerber OMEGA, Signlab and more! Twoyear
manufacturer’s warranty included. Made in USA.
T10481 $5,495.00

Death date
portable systems
GERBER
Portable
Model GS15 TM plus
Vinyl and stencil cutter
The GS15plus with Hyatt’s custom case - makes it
portable for on-site final death dates and graphics. Unit
includes rugged carrying case and a power inverter to
power the cutter and your laptop. Have all the equipment
available for one visit to the cemetery saving time and
money, rather than traveling back and forth to the shop.
Made in USA.
T10451 $8,645.00
Allen Datagraph
Portable
Model 315
Vinyl and Stencil Cutter
The Allen 315GTS with options for portable use. Unit
includes rugged carrying case and a power inverter to
power the cutter and your laptop. Do the entire job on-site
saving time and money, rather than traveling back and
forth to the shop. Made in USA.
T10480 $5,995.00
Lease Payment Cost to Own Cost to Own
Per Month Per Day Per Hour
536 GTS $8,795.00 $187.33 $6.77 $0.85
GS750M $10,995.00 $234.19 $8.46 $1.06
GS15plus $7,650.00 $162.95 $5.88 $0.74
315 GTS $5,495.00 $117.04 $4.23 $0.53
316-MTP Death Date $5,995.00 $127.69 $4.61 $0.58
GS15plus Death Date $8,645.00 $184.14 $6.65 $0.83
• Calculation based on 5-year ownership, 52-weeks per year, 5-day 40-hour weeks.
Calculation based on outright purchase. Figures will be higher factoring leasing costs.
Leasing based on rates in effect 12/1/2010 using 60-month lease with first and last payment
as deposit and $1.00 buyout at lease end. Rates subject to change based on current interest
environment and your credit situation. Exact rates will be quoted directly by leasing company.
Accessories, training, shipping and taxes are additional

Monument packages
Our Most
Popular Package!
HYATT’s
MONUMENT
PRODUCTION PACKAGE
CUTTER • 536 GTS PLOTTER
DESIGN and SYSTEM SOFTWARE
Our most popular package. Features the Allen Datagraph 536 GTS
cutter, with Omega LS software and Design Mart designer package
of choice. Includes designs and fonts to create customized
templates. Also includes free roll of Anchor Continental 25” stencil.
Online training with GoToMeeting TM included free, or optional
on-site installation and training available at additional charge.
$11,785.00
Lease Payment Cost to Own Cost to Own
Per Month Per Day Per Hour
$251.02 $9.07 $1.13
Making a Mark on the Monument Industry
Call Ron to Assist You in Choosing the Right Equipment for Your Shop.
www.hyatts.com
Ron Clamp
Hyatt’s Monument Industry Specialist

NON-Laser impact system
GRANITE IMPACT ETCHER
AVAILABLE LEASING
Lease Payment Cost to Own Cost to Own
Per Month Per Day Per Hour
Granite-CP $13,750.00 $292.88 $10.58 $1.32
Granite-SR $17,900.00 $381.27 $13.77 $1.72
Granite-SX $21,000.00 $447.30 $16.15 $2.02
Samples etched onto tile.
Non-Laser.
Easy to Use.
Reliable.
• Calculation based on 5-year ownership, 52-weeks per year, 5-day 40-hour weeks.
Calculation based on outright purchase. Figures will be higher factoring leasing costs.
Leasing based on rates in effect 12/1/2010 using 60-month lease with first and last payment
as deposit and $1.00 buyout at lease end. Rates subject to change based on current interest
environment and your credit situation. Exact rates will be quoted directly by leasing company.
Accessories, training, shipping and taxes are additional
let me show you how!
If you are not familiar with how easy it is to design
a die using Gerber OMEGA software and DesignMart
artwork, let me show you how using GoToMeeting TM .
In a one-on-one webinar on your computer, I will walk
you through the design process to the point you are
ready to cut stencil. If you thought having your own
design package in your shop is hard, it is not. Just give
me a call or drop me an email and I will do the rest.
EMAIL: rclamp@hyatts.com • PH: 800-234-9288 ext 865
The Granite Impact Etcher is a non-laser,
easy-to-use, reliable machine. The diamond needle
physically hits the stone, creating images that are
close to manual etching. Due to its ability to etch deep,
it can achieve good visibility even on stones that have
poorer contrast. Utilizing automatic gap-tracking technology,
the Granite Impact Etcher Series eliminates
focusing or a need to level the stone. Now available
with a three year warranty.
Granite-CP Impact Etcher
• 15.7" x 23.6" Image Area
• Portable and can be positioned directly over the stone.
T10422 $13,750.00
Granite-SR Impact Etcher
• 25.2" x 29.9" Image Area • Mid-range floor model
T10423 $17,900.00
Granite-SX Impact Etcher
• 25.2" x 48.8" Image Area • Large floor model
T10424 $21,000.00
Granite-SR
Granite-SX
Granite-CP

software
GERBER
OMEGA CS cut solutions
• Complete design (layout) and output (plot) software.
T11303 $2,295.00
Design Online and Then Cut with Gerber!
Let your sales staff or customers design monuments in color on the web and
email the image to you for processing. With Design Mart’s Online Catalog and
Monument Designer you and your customers can browse catalogs and design
monuments that can be cut with Gerber’s OMEGA software.
GERBER
OMEGA LS LAYOUT STATION
• Economical solution to add a design station.
• Save files to a network folder for output.
• Includes all the design programs found in OMEGA (Composer, File
Converter, Font Designs, Font View, Font Manager, GAFMAN, etc.)
T11306 $800.00
Point of Sale Package
monument design station
Design Mart Package Includes:
• Modified Roman, Condensed Modified Roman, Vermarco, Government, Hebrew,
Old English, Script, Russian, Uncial Gothic, plus hundreds more!
• 10,000 designs and design components • No license or annual fee.
• Promotional help. Design Mart will assist in developing print brochures.
Design Mart Package
+
OMEGA TM LS
With OMEGA LS:
• You own the software and designs.
• No required annual license fee.
• Includes a monument tutorial.
Only
$2,795
OMEGA LS Design Mart Package
Conversion of Files
Learn Gerber the Easy Way!
Ask about our Gerber OMEGA Tutorial. This guide
makes it easy to learn all the basics needed for
composing and lettering.
Color Kit 3.0
Before After
Complete Tutorial on CD ROM Only $149
ADD Real granite
color and texture!
Color Kit 3.0 makes it easy to add realistic granite
color and texture to your Gerber drawings. Five granite
colors—each with three textures.

Add monuments any time.
You can add monument clip art to your
collection at any time. Make it part of your
purchase through Hyatt’s, add it through
Hyatt’s later with a system upgrade, or call
Design Mart directly any time you need to
add a CD or individual monument to your
collection.
Design Mart has more than 25 series to
choose from. You can add CDs plus you
can have matching brochures printed—
personalized with your company name
and logo.
Go online or call today for more info on
how to enhance your Gerber system.
Ask about our Starter Kit.
We’re here because
your reputation
is carving stone.
training
Hyatt’s offers training packages that are
comprehensive, covering design, layout,
stencil production, and more —all the
way through product completion.
Hyatt’s offers on-site installation and
training. We also utilize GoToMeeting TM
for online training. Online training
provides the benefit of being able to
do training when you want to and also
the ability to break sessions up into
multiple short sessions over several
weeks rather than all at once in an onsite
session.
a resource
Use Hyatt’s and Ron Clamp as a
resource. Ron is an experienced third
generation sandblaster who offers
shape carving training. If you are starting
a new business, or expanding your
current monument business, Ron can
help jump start your effort. If you need
recommendations on equipment not
available from Hyatt’s Ron can make
those recommendations and provide the
best companies to purchase it from.
Use Hyatt’s and Ron as a resource. If
you are interested in advanced training
or just advice, contact Ron at:
1-800-234-9288 x865 or rclamp@hyatts.com
Design Mart P.O. Box 56 Elberton, GA 30635 www.designmart.com
PH: 800-736-7455 EMAIL: d-mart@designmart.co

Are you visiting
Elberton, Georgia?
Granite Capital of the World
Elberton, Georgia
Ron Clamp is a third generation sandblast shape carver, and native of
Elberton, GA. Ron began his career in the granite industry in college
as a gang saw operator, soon became a journeyman sandblaster, and
then a master engraver while working under the direction of Charlie
Clamp, Frank Bone, and Charlie Mann. Ron’s carving techniques
have been influenced by Jimmy Parham, Joe Fernandez and Boyd R.
Parham. Ron built his own company on his reputation for carving large
specialty monument projects throughout the United States and overseas.
If you are visiting Elberton, Georgia, utilize Ron’s experience in showing you around the
area, including introducing you to some of the vendors Hyatt’s deals with, such as Miles
Supply and Design Mart. If you are considering an equipment purchase, Ron can also
demonstrate the equipment available in this brochure. Ron is also available for training
at his facility.
Ask Ron!
EMAIL: rclamp@hyatts.com • PH: 800-234-9288 ext 865
http://www.egaonline.com/egaindustry/elberton
training books
“Carved in stone”
by Ron and Sallie Clamp
A 148-page comprehensive guide
to monumental sandblasting and
shape carving.
T10805 Hard Cover $79.95
T10807 Paperback $38.95
CALL: 1-800-234-9288 ext. 301 • FAX: (716) 884-3943 • EMAIL: sign@hyatts.com • WEB: www.hyatts.com
www.hyatts.com
910 MAIN ST • BUFFALO NY 14202
PRESORTED
STANDARD
U.S. POSTAGE
PAID
BUFFALO, NY
PERMIT NO 0378