Marine Catalogue 2011

Application Guidelines
For a complete BlueCool Classic system, please select the following:
Core unit
Please select the core unit according to the required cooling capacity, the available voltage and whether cool only
or heating via reverse cycle is needed.
■ A Air conditioning unit
See page 76
■ B Air Control (control unit)
See page 94
Position A and B as well as the following components are included in the scope of delivery:
■ Electric cable and control box ■ Installation manual ■ Remote air temperature sensor 3 m
■ Display cable 4.5 m
■ Operating manual
Air system
Please order separately the air ducting system for the application consisting of:
■ C Return air grille See page 101
■ D Air ducting
■ E Transition box See page 102
■ F Supply air grille
See page 102
See page 101
BlueCool Products
Sea water circuit
Please order separately the components for the sea water circuit consisting of:
■ G Sea water inlet
See page 116
■ H Sea water strainer
See page 114
■ I Sea water pump
See page 96
■ J Closing valve
See page 108
■ K Overboard discharge
See page 116
■ L Water hose
See page 104
Webasto BlueCool Classic
Webasto BlueCool Classic air conditioning units are systems with one hermetically encapsulated compressor. The cooling circuit
includes not only the compressor but also a condenser, a throttle element (capillaries or expansion valve) as well as an evaporator.
Self-contained Webasto BlueCool Classic units are extremely compact. All components (compressor, condenser, evaporator and
blower) required for cooling a cabin, a salon, a lounge or another room are mounted on a stainless steel tray. Webasto BlueCool
Classic units are available in different power ratings. This means you are sure to find the ideal system for the specific needs of almost
all room sizes requiring cooling in a yacht.
75