Pearl Abrasives Catalog, from Best Materials

& ACCESSORIES
DUST CONTAINMENT SYSTEM
FOR CIRCULAR SAWS
STAINLESS STEEL SAW VAC
FOR CIRCULAR SAWS
BEFORE
AFTER
PT. NUMBER
#SDC714M
Outlet hose port.
1-1/2" O.D.
VACUUM REQUIREMENTS: SawVac will work with any vacuum, but for
optimum efficiency use a vacuum rated at or above 11.5 amps (1.75
continuous hp) or 110 cfm.
PERFECT WHEN CUTTING:
CONCRETE • FIBERGLASS • WOOD
Made of heavy duty stainless steel for durability.
Easy to assemble, installs in minutes!
Does not obstruct operator’s view.
WORKS WELL WITH YOUR
EASY TO
ASSEMBLE,
INSTALLS IN
MINUTES!
WILL FIT THE FOLLOWING SAWS:
- All Skil ® 7-1/4 worm drive saws, including HD77 and HD77mag
- Skil ® 8-1/4 Model 5860 (with slight modification)
- Bosch ® Model 1677M worm drive saw
COLLECTS
UP TO 95%
OF DUST!
WATERKIT
FOR CIRCULAR SAWS
PT. NUMBER
#BRWK001
Includes: Ground Fault Circuit Interrupter, Blade Roller ball
valve diverter assembly, Quick Release Coupler with 2 Rubber
Gaskets, Flexible Plastic Tube, Plastic Nut, Hose Clamps.
Reduces the operator’s levels of dangerous, cancer causing
airborne pathogens, dust and fatigue!
Finger tip controls allow the minimal use of water, to help
control the hazards to the environment created by wet cutting.
Cooling and lubricating with water will make your expensive
diamond blades last up to 50% longer.
Cooling the blade also helps to cool the motor, thus extending
the life of your saw.
Kit includes a UL Listed Ground Fault Circuit Interrupter to
eliminate shock hazard.
CONTROLS DUST AND
INCREASES TOOL LIFE!
WORKS WELL WITH YOUR
Shown with
saw, blade
and Blade
Roller.
77