FRIATOP clamping unit - Friatec

More documents

Recommendations

Info

2 Tensioning belt Adapter Pressure tube The FRIATOP clamping unit Twist grip Top loading component (e. g. tapping ball valve) Housing
Index Page 1. Areas of application 3 2. Description of the FRIATOP clamping unit 4 3. Assembling the FRIATOP clamping unit 4 4. FRIALEN ® fusion 6 5. Removing the FRIATOP clamping unit 6 6. Before drilling through please allow to cool down for the times listed below 7 7. Warranty 7 8. Functional safety 7 9. UPDATES for Assembly Instructions 8 1. Areas of application The FRIATOP clamping unit developed for FRIALEN ® saddle fittings is pneumatically operated and is suitable for use when fusing on saddle fittings of the special TL type (see illustration on page 2). All the saddles identified as “TL” types in the latest FRIALEN ® -price list (e.g. DAA-TL / SA-TL / AKHP-TL / VAM-TL / SPA-TL / VSC-TL) for pipes above 250 mm diameter can be used. Please get the possible applications and dimensions from our price list. WARNING! When processing the FRIAFIT ® sewage saddle ASA-TL with pipe d 560, the clamping pressure at the manometer of the air pump may not exceed approx. 2bar. The clamping unit is also suitable for fitting house connection fittings and branch connectors on HD-PE relining pipes (U-liners / C-Liner / Swage lining / Roll down) in conjunction with special FRIALEN ® relining saddles from DN 100 upwards (on enquiry). 3
Page 1: FRIALEN ® Assembly and Operating I
Page 5 and 6: 3.3 Place the saddle component onto
Page 7 and 8: 6. Before drilling through please a

FRIATOP clamping unit - Friatec

Create successful ePaper yourself

Delete template?

Save as template?