TAH Doormerica - StudioSupplier

Doormerica TAH
EDR701 & EDFR701 - Heavy Duty Grade 1 Rim Exit Device
ABS - AMERICAN BUILDING SUPPLY, INC.
TAH
ED-501 & ED-F501 - Heavy Duty Commercial Rim Exit Device
Features:
• Chassis mounted unit construction.
• Minimum style 4-1/2”.
• Standard door thickness 1-3/4”.
• For all doors up to 36”.
• Universal design retrofits on Von Duprin 99 series & Sargent
88 Series.
• Material: Cover, and cap and rail are made of brass, bronze or
stainless steel.
• 161 ANSI cutout.
• Mounting: Furnished with wood & machine screws. Thru
bolts, standard on fire rated devices.
Features:
• Non Handed.
• • Latch Dead Bolt: Stainless Latching Steel and 3/4” Non-Handed.
• • 10 year Dogging warranty. Standard Only on NON-UL listed Device.
• Baked Enamel Aluminum (AL) and Duronodic (DU)
Finish.
Dimensions:
• For all doors up to 36".
• • Touchbar PED-PS-01 height & PED-SS-01 to finish floor -..41” Standard at center Strike and Shim.
• • Touchbat PED-FP-161 projection & PED-FP-ANSI - Latch & Strike Filler
Plate. Neutral ......................2-1/2”
• PED-SNB depressed - Standard .................1-3/4”
with Sex Bolts.
• • Center F-ED-500 case 8-1/2” - UL Listed x 2-1/2” for x 2” Fire and Egress - Listed for
• Device 1-1/2 length for Doors Standard Under ...................2’2” 38" (3'-2") to x 3’ 86" (7'-2").
Extra Long (L)............2’9” to 4’
Options:
Options:
• • Stocked ED-S551 48” length, - Exit specify Device “L” made from Stainless Steel.
• • Available XL - different For all functions. Doors up Lever to 48". escutcheon trims are
• Grade EAK-500 1 construction - Alarm with Kit. clutch Mortise free wheeling Cylinder mechanism. NOT Included
• ET-LHL-500 - Entry Function - Lever - 161 Cylindrical
Covers 161 cutout, see page 11.
Prep.
• Alarm Kit available for 3’ & 4’ applications.
• ET-LHL-580 - Storeroom Function - Lever - 161
• Cylinder Cylindrical Dogging Prep. Kits available see page 12.
• • Glass ET-PP05 Bead Kits - available Pull Plate see page with 12. Cylinder cut-out, Rim
Cylinder NOT Included.
• ET-PP06 - Pull Plate Only.
Special Order:
Contact Sales Department for Availability.
• Thicker door requirements up to 2/4” thick.
• Other finishes available US3, US4, US10, US26, Gold.
Specifications:
• All exit devices shall be of touch bar design with smooth
operation and be operative over 2/3 of the door’s clear
opening width.
• All exit devices must be listed under “Panic Hardware” in
the Accident Equipment List of Underwriter’s Laboratories,
Inc. Where labeled doors are used as exits, they must be
equipped with labeled Fire Exit Hardware and UL 10C, UBC
7-2-1997 codes.
• All exit devices shall be of chassis mounted unit construction.
Code compliance:
Code Compliance:
•• ANSI ANSI A165.3, A156.3 Grade Grade 1 1. UL10C and UBC 7.2 for
• UL listed positive for Panic pressure. and UL 10C, UBC 7-2-1997 codes.
•• UL listed ANSIA117.1 for Fire Exit and Hardware. ADA for 3 Hours. barrier-free accessibility
••(A) label C-UBC rating - on California pairs of doors Amended up to 8’0” Uniform x8’0” swinging Buildersin
same Code or opposite - 2001directions.
• NFPA-80 - National Fire Protection Association -
1999
• NFPA101 National Fire Protection Association-
Life Safety - 2000
1 YEAR WARRANTY
We will replace or repair this item within a one year
period from the date of shipment proven defective in
workmanship or material. Our warranty does not
cover, defect due to failure to perform normal
maintenance, faulty installation or uses for which our
products were Stocked not designed. Product Our liability shall in no
event exceed the EDR701, net cost EDFR701 of the merchandise. No
materials may 36”, be 48” returned length without applications written consent.
We are not responsible Finishes: US28, for US10B, any charges US32D for labor or
material incurred by others. This is a limited
warranty and liability for our products.
10 8 American Building Supply, Inc. 04/10 05/12