Pemko - StudioSupplier

CO 

ABS-American Building Supply, INC. 

Saddle Thresholds 

Pemko 

Stocked Product 

Finish Key 

A: Aluminum 

D: Dark Bronze 

SN: Satin Nickel 

Model Size Finishes 

170 36”, 48”, 72” Aluminum, 

170 36”, 48”, 72” Dark Bronze 

171 36” Aluminum, Dark Bronze, Satin Nickel 

171 48” Aluminum, Dark Bronze 

171 72” Aluminum, Dark Bronze, Satin Nickel 

172 36”, 48”, 72”, 96” Aluminum, 

172 36”, 48”, 72” Dark Bronze 

172 36”, 72” Satin Nickel 


Finish Key 

Latching Panic Exit Saddles 

• Used in conjunction with surface applied vertical rod exit device, or as a stop 

• For offset applications, use an elevator (see page 37). 

2001_T 

AVAILABLE FINISHES: A, D, G 

2005AV Allow 1/4" door Aluminum 

clearance. 

2005DV Dark Bronze 

255A Aluminum 

255D Dark Bronze 

Model Size Finish 

2005 36”, 48”, 72” Aluminum (AV), Dark Bronze( DV) 

255 36”, 48” 2002_QAluminum, Dark Bronze 


Allow 1/4" door clearance. 

2005_T 

AVAILABLE FINISHES: A, B, D, G 


2006_T 



03/11 American Building Supply, Inc. 1


Thresholds 



Finish Key 

A: Aluminum 




270 36”, 48”, 72” Aluminum, Dark Bronze 



272 96” Aluminum 


Finish Key 

A: Aluminum 





2748 96” Aluminum 

2 American Building Supply, Inc. 03/11



Door Bottoms, Shoes & Sweeps 

DOOR BOTTOMS 


Finish Key 

For hollow metal doors 

with inverted bottom 

channel. 

AV: Aluminum 

DV: Dark Bronze 



210 36”, 48” Aluminum, Dark Bronze 


216 36”, 48” Aluminum, Dark Bronze, Satin Nickel 

221_V217 36”, 48” Aluminum, Dark Bronze 

221_PK 

AVAILABLE FINISHES: 

A, D, G 

For hollow metal doors 

with inverted bottom 

channel. 

mal Barrier Model 

hermal break (FG) prevents 

ctivity of cold from exterior to 

r. 

ed with PemkoPrene Seal. 

Combination 

door shoe and 

kick plate. 

Positive pressure with PK seal only. 


Finish Key 

A: Aluminum 


DOOR BOTTOMS 




Door Shoes (Cont.) 

222_V 

222_PK 


A, D, G 

Positive pressure with PK seal only. 

2221_V 

2221_PK 



Surface Sweeps 


Dark Bronze 

Satin Nickel 

181NB 




315 36”, 48” Aluminum, Dark Bronze, 

Satin Nickel (36” only) 


3452NB 36”, 48” Aluminum, Dark Bronze 

3452V 36”, 48” Aluminum, Dark Bronze, Satin Nickel 




Door Bottoms 




411RL 32”, 36”, 48” Aluminum 

412RL 36” Aluminum, Dark Bronze 

4131RL 36”, 42”, 48” Aluminum, Dark Bronze 

4131NBL 36”, 48” Aluminum, Dark Bronze 

420VL 36”, 48” Aluminum 

4301RL 36”, 48” Aluminum, Dark Bronze 

Automatic Door Bottom 

412 RL Clear Aluminum, Dark Bronze 




Door Top Weatherseal & Sill Nosing 

Stocked Product: 

Finish Key: 

326A Aluminum 

326D Dark Bronze 

346C Clear Aluminum 


326 36”,48”, 72” Aluminum, Dark Bronze 

346C 36”, 40”, 72”, 76” Clear Aluminum 

Split Astragals & Gasketing 



297 36” X 84” Aluminum, Dark Bronze 





303 36” X 84” Aluminum, Dark Bronze, Satin Nickel 


303 84”, 96” pair Aluminum, Dark Bronze, Satin Nickel 

303 120” pair Aluminum, Dark Bronze 

29326 96” pair Aluminum, Dark Bronze 

29326 


Split Astragals & Gasketing 





306AQD 36” X 80” Aluminum 

306AQD 36” X 84” Aluminum 

306AQW 36” X 80” Aluminum 

“T” & Overlapping Astragal 



355CS/DS 84”, 96”, 108”, 120” Aluminum, Dark Bronze 

355CV/DV 84” Aluminum, Dark Bronze 




“T” & Overlapping Astragals & Brush Weatherstrip 

Stocked Product: 

Finish Key 

AV: Aluminum 

DV: Dark Bronze 

SP: Galvanized Steel 

ASTRAGALS AND MEETING STILES 

297_S 


A, BDG, D, G, PW, SN 

303_S 


A, BDG, C, D, G, PW, SN 

316_S 


A, BDG, D, G 

18041- CNB/DNB 18061- CNB/DNB 

ALT 

ALT 

ALT 



357 84”, 96” Galvanized Steel, Dark Bronze 


18041 84” Clear Aluminum, Dark Bronze 

18061 84” Clear Aluminum, Dark Bronze 

Locking Astragals Slimline Style 

18041_NB 


C, D, G, SN 

ALTE 

NOTE: Brush should mesh 

from 1/32" to 1/16". 

AVAILABLE FINISHES FOR PRODUCTS SHOWN ON THIS PAGE (see General Info 

A (Mill Finish Aluminum) • BDG (Bright Dip Gold Anodized) • C (Clear Anodized) • D (Da 

G (Gold Anodized) • PW (Painted White) • SN (Satin Nickel Anodized) • Special finishes a 

74 

VENTURA , CA USA 

PH. 800.283.9988 

MEMPHIS, TN USA 

PH. 800.824.3018 

VANCOUVER, BC CANA 

PH. 877.535.7888 



3493S 80”, 84” Clear Aluminum, Dark Bronze, Satin Nickel (80” only) 

3496Q 80”, 84” Clear Aluminum, Dark Bronze 


Minimum space between the door face and 

PF114PS_ 

the stop is 3/8"; maximum space is 7/16". 

Perimeter Gasketing Gasketing 

ER GASKETING 

AVAILABLE FINISHES: BL 

ation imeter on gasketing these perimeter products, AVAILABLE gasketing please LENGTHS: see products, the 36", Adhesive please 48", 72", Gasketing see 86", the 96" Adhesive section. Gasketing section. 

Perimeter S88_ Gasketing S52_ S88_ 


between the door face and 

maximum space is 7/16". AVAILABLE FINISHES: BL, W 

AVAILABLE FINISHES: BL, W 


ES: tion D, on GR, these Wperimeter AVAILABLE gasketing FINISHES: products, AVAILABLE please BL, C, see D, FINISHES: the GR, Adhesive TAN, BL, WGasketing C, D, GR, section. TAN, AVAILABLE W FINISHES: AVAILABLE BL, D, WFINISHES: BL, D, W 

AVAILABLE LENGTHS: 100' • For more information AVAILABLE on these perimeter LENGTHS: gasketing 18', 20', products, 300' please see the Adhesive AVAILABLE Gasketing LENGTHS: section. 17', 250' 

1', S: 17', 25' 18', 20', 21', AVAILABLE 25' LENGTHS: AVAILABLE 17', 18', LENGTHS: 20', 21', 17', 25', 18', 30', 20', 21', 25', AVAILABLE 30', LENGTHS: AVAILABLE 17', 18', LENGTHS: 20', 21', 17', 25', 18', 510' 20', 21', 25', 510' 


Prene /Silicone/Thermoplastic 

204', 510' 204', 510' 

Kerf-In Weatherstrip 

S88_ 

S773_ 

S44_ 

S88_ 

S: D, GR, W 

S: 17', 18', 20', 21', 25' 

FINISHES: BL, W 

LENGTHS: 100' 

e Corner Pad 

AVAILABLE FINISHES: BL, C, D, GR, TAN, W 

Smoke Gasketing PK52_ AVAILABLE FINISHES: D, GR, W 

AVAILABLE LENGTHS: 17', 18', 20', Pemko 21', 25', 30', Prene 


ith the black stop or is white 1/16"; polypropylene maximum P112PS space pile, is with 3/8". (Black) 

sitive Positive adhesive Pressure gasketing. rated up P112WPS to 20 minutes. (White) 

4" wide x 2" high. 

er of jamb on hinge side to seal against air and 

d w metal and wood 

Thermoplastic elastomer formulation will 

on. 

not transmigrate; remains flexible • Designed to -60° for F. tighter • Designed frames. for tighter frames. 

lications. 

w metal and wood • Designed for tighter • Designed frames. for tighter frames. 

• Designed for tighter frames. 

cations. 

• Designed for hollow • metal Demonstrates and wood extremely • Demonstrates low closing extremely force. low closing force. 

• Designed for tighter f 

ressing m at 5/16"; com 


(Black) • Demonstrates extremely • Demonstrates low closing extremely force. meeting low closing stile applications. force. • Demonstrates extremely low closing force. 

P112 installed on hinge 

essing at 5/16"; com 

• Seal begins compressing • Seal begins at • 3/16"; compressing Designed compresses for tighter at 3/16"; frames. compresses 

• Demonstrates extrem 

to a 1/16" gap. 

• Demonstrates extremely low closing force. 

side of jamb. 

PS o a 1/16" APPLICATION DETAIL • Seal begins compressing at 3/16"; compresses 

(White) gap. • Seal begins compressing • Seal begins at 3/16"; compressing • Seal at begins 3/16"; compressing to at seal 5/16"; up to com a 1/16" to gap. seal up • to Demonstrates a 1/16" gap. extremely low closing force. 

• Seal begins compress 

• Seal begins compressing at 3/16"; com 

to seal up to a 1/16" gap. 

presses to seal up presses to a 1/16" to gap. seal up to a 

presses 

1/16" gap. 

to seal up to a 1/16" gap. 

• Seal begins compressing at 3/16"; com 

to seal up to a 1/16" g 

presses to seal up to a 1/16" gap. 

NOTE: Products shown in this section may not be drawn to scale. 

presses to seal up to a 1/16" gap. 

d 

AVAILABLE FINISHES FOR PRODUCTS SHOWN ON THIS PAGE (see General Information section for finish chart) 

SIVE GASKETING: 

NOTES FOR ALL ADHESIVE BL (Black) GASKETING: • D (Dark Brown) • W (White) 

All : have All adhesive a limited gaskets gaskets shelf have life. have Stocked 

a limited This a limited product shelf life. shelf must This 

Product 

life. product be This used product must within be must 6 used months within be used of 6 purchase months within Adhesive of 6 purchase and months must Corner of and be purchase Pad must stored Colors: be between stored and blank must between 50 (Black O F stored and 50P112 O 

Pad) F 100 and between O installed 

• 100 F. W O F. (White 50on O F and hinge 

Pad) 100 O F. 

Storage and shelf life: All adhesive gaskets have a limited shelf side life. of This jamb. product must be used within 6 months of purchase and must be stored between 50 O F and 

sive ails, please Gasketing please see see Adhesive section. Adhesive Gasketing Gasketing section. section. 


Finish key: BL Black For further notes/details, PK52 please 18’, see Adhesive 20’ Gasketing section. Black, White 

PG-9 D Dark Bronze 

www.pemko.com 

PK33 17’, 20’, 25’ Black, White, Dark Bronze 

105 

W White 

PK55 17’, 20’, 25’ Black, White, Dark Bronze 

BL (Black) • D (Dark Brown) Magnetic 

• W (White) 

Gasketing & Edge Seal Products 

AVAILABLE FINISHES: BL, D, W 

P50_ AVAILABLE FINISHES: BL, C, D, GR, TAN, W 

AVAILABLE LENGTHS: 17', 18', 20', 21', 25', 510' 

AVAILABLE LENGTHS: 17', 18', 20', 21', AVAILABLE 25' FINISHES: AVAILABLE BL, WLENGTHS: 17', 18', 20', 21', 25', 30', 

AVAILABLE LENGTHS: 204', 510' 17', 250' 


AVAILABLE LENGTHS: 18', 20', 300' 

PK52 

ermoplastic Kerf-In Weatherstrip 

• Seal begins compressing • Seal begins at 1/4"; compressing at 1/4"; 

compresses to seal compresses up to a 1/16" to gap. seal up to a 1/16" gap. • Designed for tighter • Designed frames. for tighter frames. 

effectively ight PK52_ 

and blocks light and Minimum space between the door P50_ face and the 



rating 

AVAILABLE 

a room. 

stop is 1/16"; maximum space is 3/8". 

• 

the 

Demonstrates 

stop is 1/16"; maximum 

extremely • Demonstrates 

space 

low 

is 

closing 

3/8". 

extremely force. low closing 

the stop 

force. 

is 1/16"; maximum space is 5/16". 

FINISHES: BL, W 


Positive • Seal Pressure begins rated compressing up to 3 hours. at 1/4"; 

• 

AVAILABLE LENGTHS: 18', 20', 300' 

AVAILABLE LENGTHS: 17', 250' 

Positive Seal begins Pressure compressing rated • Seal up to begins 20 at minutes. 5/16"; compressing at 5/16"; 

keting as hospitality gasketing compresses to seal up to a 1/16" gap. 

• Designed for tighter frames. • Seal begins compressing Available at 1/4"; in 17' packaged coils and 250' 

ffectively he ality products blocks in light the and 

compresses to seal compresses up to a 1/16" compresses to gap. seal up to seal a 1/16" up bulk to gap. a 1/16" coils. gap. 

• Designed for tighter f 

ting a room. 

• Triple-fin design effectively • blocks Demonstrates light and extremely low closing force. 

cts section). 

sound from infiltrating a room. 

• Demonstrates extrem 

• Seal begins compressing at 5/16"; 

Thermoplastic elastomer formulation will 

as hospitality gasketing 

not transmigrate; remains flexible to • -60° Seal F. begins compress 

lity products in the 

• Product designed as hospitality compresses gasketing to seal up to a 1/16" gap. 

Adhesive Corner Pad 

ace ts section). between the door face and the 

Minimum space between 

(see 

the 

more 

door 

hospitality 

face and 

products in the 

compresses to seal up 


; maximum space is 3/8". PK33_ PK33_ 

the stop is 1/16"; maximum Hospitality space Products is 3/8". PK55_ 

section). the stop PK55_ 

is 1/16"; maximum space is 5/16". 

• Corner pad with black or white polypropylene pile, with 

ES: sure C, rated D, Wup to 3 hours. AVAILABLE pressure-sensitive FINISHES: AVAILABLE BL, Positive 

adhesive D, WFINISHES: Pressure 

gasketing. 

rated BL, up D, to W20 minutes. AVAILABLE FINISHES: APPLICATION DETAIL 

Available AVAILABLE in BL, 17' D, packaged WFINISHES: coils BL, and D, 250' W 

PK33_ 

PK55_ 

1', S: 17', 25' 18', 20', PK33 21', AVAILABLE 25' 

bulk coils. 

• Pads are FINISHES: 1-1/4" AVAILABLE wide 17', x 18', 2" high. FINISHES: 20', 21', S77_ 17', 25', 18', 510' 20', 21', 25', AVAILABLE 510' FINISHES: AVAILABLE PK55 17', 18', PK33_ 

FINISHES: 20', 21', 17', 25', 18', 510' 20', 21', 25', 510' PK55_ 

S: C, D, W 


AVAILABLE Thermoplastic FINISHES: BL, elastomer D, W formulation will 

• Apply to corner of jamb on hinge side AVAILABLE to seal against FINISHES: air and C, D, W 


AVAILABLE FINISHES: B 

S: 17', 18', 20', 21', 25' 

AVAILABLE FINISHES: 17', 18', 20', 21', 25', 510' AVAILABLE not FINISHES: transmigrate; 17', remains 18', 20', flexible 21', 25', to 510' -60° F. 

light infiltration. 

AVAILABLE LENGTHS: 17', 18', 20', 21', 25' 

AVAILABLE FINISHES: 17', 18', 20', 21', 25', 510' AVAILABLE FINISHES: 1 

n in this section may not be drawn to scale. 

PemkoPrene /Silicone/Thermoplastic Kerf-In Weatherstrip 

204', 510' 

PERIMETER GASKETING 

APPLICATION DETAIL 

VAILABLE FINISHES FOR PRODUCTS SHOWN ON THIS PAGE (see General Information section for finish chart) 

AVAILABLE FINISHES: C, D, G 

www.pemko.com 105 

(Black) • D (Dark Brown) • W (White) 

W 


er Pad Colors: blank (Black Pad) • W (White Pad) 

5', 30', S44 AVAILABLE LENGTHS: 17', 18', 20', 21', 25', 510' 

e see the Adhesive Gasketing section. 


the stop is 1/16"; maximum space is 5/16". 

Available in 17' packaged coils and 250' 

bulk coils. 

Adhesive Corner Pad Colors: blank (Black P112 Pad) installed • W (White on hinge Pad) 

side of jamb. 

2815_M 

g section. 

AVAILABLE 2815_M FINISHES: C, D, G 

le. ISHES: AVAILABLE C, D, GFINISHES: C, D, G 

TS SHOWN ON THIS PAGE (see General Information section for finish chart) 

S44_ 


S44_ PK52_ S44_ 

Adhesive Perimeter Gasketing 

2815_M 

mko.com 105 

ISHES: BL, C, D, GR, TAN, W 

GTHS: 17', 18', 20', 21', 25', 30', 

S44_ 


AVAILABLE LENGTHS: 17', 18', 20', 21', 25', 510' 


Finish Key D Dark Bronze 

W White 

own in this section may not be drawn to scale. 

NOTE: Products shown in this section may not be drawn to scale. 

AILABLE FINISHES • Designed FOR PRODUCTS for tighter frames. SHOWN ON THIS PAGE (see General Information section for finish chart) Model Size Finish 

AVAILABLE FINISHES FOR PRODUCTS SHOWN ON THIS PAGE (see General Information section for fini 

hown ion may in this not be section drawn • Demonstrates may C to (Clear not scale. Anodized) be drawn extremely • to D (Dark scale. low Bronze closing Anodized) force. • G (Gold Anodized) 

S44 17’, 21’, 25” White, Dark Bronze 

C (Clear Anodized) • D (Dark Bronze Anodized) • G (Gold Anodized) 

Adhesive • Seal Gasketing begins Colors: compressing • BL (Black) at • 5/16"; C (Clear) • D (Dark Brown) • TAN (Tan) • W (White) 

ISHES AILABLE FOR FINISHES PRODUCTS FOR SHOWN PRODUCTS ON THIS SHOWN PAGE ON (see THIS General PAGE Information (see General section Adhesive Information Gasketing finish chart) section Colors: for • BL finish (Black) chart) • C (Clear) • D (Dark Brown) • TAN (Tan) • W (White) 

compresses to seal up to a 1/16" gap. 

C (Clear Anodized) C •(Clear D (Dark Anodized) Bronze Anodized) • D (Dark Bronze • G (Gold Anodized) • G (Gold Anodized) 

VENTURA , CA USA MEMPHIS, TN USA VANCOUVER, BC CANADA TORONTO, ON CANADA 

hesive Gasketing 

PH. 

Adhesive 

800.283.9988 

Colors: Gasketing • BL (Black) Colors: • 

PH. 

C (Clear) 

800.824.3018 

• BL (Black) • D (Dark • C Brown) (Clear) • PH. 

D TAN (Dark 

877.535.7888 

(Tan) Brown) • W (White) • TAN VENTURA (Tan) • W , CA 

PH. 

(White) USA MEMPHIS, TN USA 

866.243.9816 PG-10VANCOUVER, BC CANADA TORONTO 

ompressing at 1/4"; 

106 

PH. 800.283.9988 PH. 800.824.3018 03/11 American PH. Building 877.535.7888 Supply, Inc. 9 PH. 866 

o seal up to a 1/16" gap. 


TURA , CA USA VENTURA 

PK55_ 

MEMPHIS, , CA USA TN USA MEMPHIS, • Demonstrates VANCOUVER, TN USA extremely BC VANCOUVER, low CANADA closing force. BC TORONTO, CANADA ON TORONTO, CANADA ON CANADA 


P50_ 


S44_ 

AVAILABLE FINISHES: B 

AVAILABLE LENGTHS: 1 

PERIMETER GASKETING



Locking Astragals Slimline Style 

SiliconSeal Adhesive Backed Fire / Smoke Gasketing 

• Seals begin compressing at 3/16”, and both can be compressed sufficiently 

to seal openings with 1/16” gaps, making door latching easy. 

• Excellent resistance to compression set, particularly at elevated temperatures 

and for extended periods of times. 

• Stays flexible between 70° F and 250° F with very high resistance to 

flex fatigue. 

• Outstanding ozone resistance rating. 

• Smoke tested by WYLE Laboratories in accordance with UL 1784-90; 

meets the requirements of NFPA 105 “Installation of Smoke Control Door 

Assemblies”. 

Gasketing - EDGE SEAL PRODUCTS 


Finish Key D Dark Bronze 

W White 


S88 17’,20’,21’, 25’ Dark Bronze, White 

Edge Sealing Products for Positive Pressure 

Door System 

• The new positive pressure building codes require stopping the passage 

of smoke, flames and hot gasses 

• Pemko’s intumescent and fire / smoke gasketing products have assisted 

numerous door and frame manufacturers in complying with the new 

stringent positive pressure standards UL10C and UBC7-2, Parts I and II, 

UBC7-2, Part I (for fire) and UBC7-2, Part II (for smoke). 

• Many fire rated door assemblies (currently listed for UL10B) can now be 

listed for positive pressure (UL10C) by using Hot Smoke Seal in combination 

with SiliconSeal. Consult individual door and / or frame manufacturers 

for specific listing information. 



HSS2000 18’,21’,24’ White, Black 

HSS2000 X S44 18’,21’,24’ Black 

HSS2000 X S88 18’,21’,24’ Black 




S773 on Frame with Beveled Edge Door 

• Pemko’s S773 is a utility gasket that can be used in virtually any application 

requiring insulation from sound, smoke and weather conditions. 

• Pemko’s S773 can seal larger gaps than traditional seals and allows for 

warped doors and frames. 

• Pemko’s S773 fins help to absorb the door’s closing impact. 

• Pemko’s S773 mounted on the rabbet (on the latch side jamb) means more 

clearance and easier operation of latches and deadbolts. 

The S773 is typically used as a perimeter gasket when sound transmission is 

an issue. It is an effective seal against heat loss and drafts. Common installation 

locations include hotel rooms, theaters, offices, etc. The S773 allows a 

low door closing force so it is particularly well suited to locations where ADA 

compliance is necessary. S773 can be effectively installed on both interior 

and exterior doors. 

The S773 has an adhesive back and should only be installed on clean, dry 

and cured surfaces. On the “latch side” door jamb and the door header, the 

S773 should be installed on the frame rabbet with the tallest fin toward the 

door stop. On the “hinge side” the S773 should be installed on the door stop 

with the tallest fin toward the frame rabbet. 


17’, 20’, 25’, Dark brown 

ANSI NUMBER: R0E154 

Fire Glazing Products 

FG3000S45-14 

FG30000S45 in 20 and 45 minute sidelite / borrowed 

lite / transom lite on hollow metal frame 

(screen) 

FG3000S45 has successfully passed 20 

minutes (with hose stream) and 45 minutes 

on wood and metal 

doors with vision lites installed. 

• Maximum wood door size with FG3000S45 

48” x 96” single and/or pairs approved 

• Maximum hollow metal door size with 

FG3000S45 48” x 120” single and/or pairs 

approved 

Note: verify all applications with your door 

and/or frame manufacturer 


FG3000S 

45 Minute X 14 Foot 



Continuous Hinges 




CFM83 83” Clear Anodized Aluminum 

CFS83 83” Clear Anodized Aluminum

Pemko - StudioSupplier

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?