InterAmerican Virtual Brochure

DoveBid 

Worldwide 

Amsterdam 

Atlanta 

Austin 

Bangkok 

Boston 

Cape Town* 

Chicago 

Dallas 

Detroit 

Dublin 

Frankfurt 

Hartford 

Hong Kong 

Houston 

Johannesburg* 

Kuala Lumpur 

London 

Los Angeles 

Melbourne 

Mexico City 

Minneapolis 

New York 

Paris 

Sacramento 

San Diego 

San Francisco 

San Jose 

Santa Fe 

Seattle 

Shenzhen 

Singapore 

St. Louis 

Stockholm 

Sydney 

Taipei 

Tokyo 

Toronto 

Tucson 

*An alliance partner 

DoveBid ® 

Webcast Auction 

By order of the U.S. Bankruptcy Court, Southern District of Florida, Miami Division, 

Case No. 03-43480-BKC-RAM, Chapter 7, Bankrupt assets of 

INTER-AMERICAN TRANSPORT 

EQUIPMENT COMPANY, LTD. 

Large Offering of 

Agricultural Equipment 

& Metalworking Machinery 

Featuring: Sugarcane Harvesters, Loaders, 

Tractors, Large Parts Inventory 

Material Handling, Fabricating, Toolroom Equipment and 

Intellectual Property 

August 24, 2004 • 9am ET 

Miami, Florida 

® 

www.industrialauctioneers.org 

www.dovebid.com

2 

Webcast Auction 

By order of the U.S. Bankruptcy Court, 

Southern District of Florida, Miami 

Division, Case No. 03-43480-BKC-RAM, 

Chapter 7, Bankrupt assets of 

INTER-AMERICAN 

TRANSPORT EQUIPMENT 

COMPANY, LTD. 

August 24, 2004 

Beginning at 9am ET 

Auction Location 

3690 NW 62nd Street 

Miami, Florida 

Preview 

August 23, 2004 

9am to 4pm ET and 

morning of the sale 

Preview Locations 

3690 NW 62nd St. • Miami, Florida 

Field Equipment in 

California*, Colombia*, Costa Rica* 

*All previews at these preview 

locations are by appointment only. 

For preview appointment, 

please contact Gary Obert at 

Phone 650.678.3981 or 

E-mail gobert@dovebid.com 

Directions 

To Auction & 

Florida Preview Location 

From Miami International Airport 

Exit airport north on LeJeune Road 

(42nd Avenue) and proceed to 62nd 

Street. Turn right (east) and proceed 

over railroad tracks to sale site on the 

right side (just past 37th Avenue). 

Watch for auction and parking signs. 

Please check in at sale site for 

directions to 2nd location. 

Additional Information 

• A buyer’s premium will apply at this 

• The auction will be conducted in 

English and will accept only U.S. 

currency 

• Bid live in person or on the website at 

www.dovebid.com 


VANGUARD 

TYPE VH2-SE 

2-ROW 

SUGARCANE 

HARVESTER 

VANGUARD 

GLADIATOR 

I/GL 3700 

1-ROW 

SUGARCANE 

HARVESTER 

(26) SUGARCANE HARVESTERS 

7 – VANGUARD GLADIATOR I/GL 3700 1-ROW SUGARCANE HARVESTERS, (REBUILT), 

Full-Top Topper With 8-Blade Cutter Disc, Hydraulic-Driven, Reversible, (2) Feeding Disc 

Drums, Base Cutter Discs: Adjustment 3” Below Ground to 15” Above Ground, 

(3) Reinforced Spiral Cone Crop Dividers, Chopper Triple-Bladed Drums With Quick- 

Change Clamp-On Knives, 44” Wide, 3-Stage Cleaning System, Consisting of: Preliminary 

Cleaning, Primary Blower & Elevator Extractor Blower, Hydraulic Folding-Type Loading 

Elevator With Slotted Floor, Cummins N-14 Engines 

2 – VANGUARD TYPE VH2-SE 2-ROW SUGARCANE HARVESTERS, Track Mounted, 

Cummins N14 Engine, Hydrostatic Transmission, Caterpillar D4 Tracks With 

24" Shoes, Hydrostatic Brakes, Swinging-Type 180 Degrees Discharge Elevator, Topper 

With (2) Feeder & (1) Cutting Discs, Reversible & Height Adjustable, (2) Pairs of 

Independent Base Cutter Discs With Top Drive Gearboxes With Adjustable Height, 

(3) Sets of Independent Reinforced Spiral Cone Crop Dividers, (2) Sets of Closed-Type 

Pivoting Upper & Fixed Lower Rollers, Width 36”, Chopper Drums With Triple Quick- 

Change Blades, Reversible, 66"W, Cleaning System: Primary Extractor Fan With Variable 

Displacement Pump, Secondary Extractor Fan on Discharge Elevator With Hydraulic 

Adjustable Air Flow, Air-Conditioned Cab 

6 – CLAAS TYPE CC-2000 SELF-PROPELLED SUGARCANE HARVESTERS, 

46”/40” Diameter 2-Disc Type Base Cutters, Speed Of Rotation 390 RPM, (8) Knives Per 

Cutter, Cutting Height 0 to 200mm, Hydrostatic Rotary Dividers & Skids, 

(2) Reversible Vertically-Rotating Side Knives, 585mm (23”) Speed 540 RPM, Ground 

Clearance 12-5/8”, Wheel Track: Front 124”, Rear 57-7/8” 

3 – VANGUARD TYPE G3700 HARVESTERS, Cummins 350-HP Engine, Hydrostatic 

Transmission, Topper With (2) Gathering Discs & Shredding Drum, (2) Hydraulic-Driven 

Base Cutting Discs Per Row, (3) Rotary Cane Dividers, Knockdown Roller & Open Feed 

Rollers (For Separation of Extraneous Material), 3-Blade Extra Wide Chopper (For Green 

Cane), Triple Airflow Cleaning System, Enclosed Operators Cab With Air Conditioning 

7 – VANGUARD/CLAAS TYPE G3700 2-ROW HARVESTERS, Track-Mounted 

4 – THOMSON SUPER RED WHOLESTICK SUGARCANE CUTTER-PILERS, 14LX16.1 

Rear & 18.4X24R1 Front Tires, Individually Adjustable Crop Lifters, (3) Decks of Finger 

Chains (For Gathering Lodged Cane), Adjustable Topping Drum Height 1.65m (5'5") to 

2.87m (9'5") 

RICE HARVESTERS 

7 – CLAAS TYPE DOMINATOR SELF-PROPELLED RICE HARVESTERS, (5) 68-SR, 

(2) 68-R, All With Cutterbar 4.20m, Cylinder Width 1.06m, Straw Walker Area 4.15m 2 

To view a complete asset list, visit our website @ www.dovebid.com


CLAAS TYPE DOMINATOR 68-SR 

SELF-PROPELLED 

RICE HARVESTER 

CLAAS TYPE CC-2000 SELF-PROPELLED SUGARCANE HARVESTERS 

California Preview Location 

SUGARCANE HARVESTER 

1 – VANGUARD GLADIATOR I/GL 3700 1-ROW SUGARCANE HARVESTER, Full-Top 

Topper With 8-Blade Cutter Disc, Hydraulic-Driven, Reversible, (2) Feeding Disc Drums, 

Base Cutter Discs: Adjustment 3” Below Ground to 15” Above Ground, 





Colombia Preview Location 


1 – VANGUARD GLADIATOR I/GL 3700 1-ROW SUGARCANE HARVESTER, Full-Top 

Topper With 8-Blade Cutter Disc, Hydraulic-Driven, Reversible, (2) Feeding Disc Drums, 

Base Cutter Discs: Adjustment 3” Below Ground to 15” Above Ground, 





Costa Rica Preview Location 


1 – VANGUARD GLADIATOR II SUGAR CANE HARVESTER, Mercedes Benz V10 350-HP 

Engine, Naturally-Aspirated, Totally Hydrostatic Transmission, Topper With (4) Feeding 

Ginger Discs, (2) Cutting Discs With Replaceable Knives & Auger to Mover Material, 

Adjustable Topping Height, Cutterhead With (4) Cutting Discs With Feeder Domes, 

Adjustable Knives, Hydraulically Adjustable Cutting Height, (6) Horizontal, Closed Feed 

Rollers With Slats, (2) Vertical Rollers & (1) Knockdown Roller, Copper Belt-Driven Chopper 

Drums With Clamp-On Knives, Cleaning System With Combination of Blower Fan With 

Extractor (Bladed) Fan, Perforated Primary & Discharge Elevator Floors, Enclosed Operator 

Cab With Air Conditioning, Offset, Safety Glass, Comfort Seat 

Auctioneer’s Note 

DoveBid is extremely pleased to have been 

selected by Inter-American Transport 

Equipment Company, Ltd. to conduct this 

Webcast Auction of a Large Offering of 

Agricultural Equipment & Metalworking 

Machinery, Featuring: Sugarcane Harvesters, 

Loaders, Tractors, Material Handling, 

Fabricating & Toolroom Equipment, Large 

Parts Inventory and Intellectual Property. The 

auction will feature a wide range of quality 

equipment, including: 

• (23) Vanguard Gladitor Sugarcane Harvesters 

• $12,600,000 Parts Inventory 

• Hyundai CNC Turning Center 

The Webcast Auction will be conducted in 

Miami, Florida with a preview of the assets 

being held on August 23, 2004 from 9am to 

4pm ET and morning of the sale. Feel free to 

attend the preview or visit our website at 

www.dovebid.com to download the auction 

catalog. 

If you are unable to attend the auction in 

person or participate over the Web, you are 

able to submit a proxy bid right from 

DoveBid’s website. 

Please remember that assets are sold as is, 

where is, and with all faults when participating 

in an auction. And as a courtesy to our Web 

buyers, DoveBid can provide contact 

information for shipping companies that will 

be attending this auction. Buyers are 

responsible for removal of assets and all 

shipping and rigging charges. 

Thank you in advance for your interest and we 

look forward to seeing you in person or on the 

Web on auction day. 

Can’t make it to Miami, 

® 

Florida? No problem. 

With DoveBid’s proprietary 

Webcast technology bidders 

around the world can bid 

at this auction from the convenience of their home or office 

through the Internet. Webcast technology allows you to 

virtually bid against bidders who are on the factory floor. 

Log on to www.dovebid.com and register even on auction 

day to bid in real time! All you need is a computer, Internet 

access, and a touch-tone telephone to participate. 

Prior to the auction, preview the assets online via digital 

photos and comprehensive descriptions. During the auction, 

view the current asset being sold on your computer screen as 

you listen to the Auctioneer live on your telephone. You 

press 1 on the telephone keypad to raise your paddle and 

press the # key to end your bid. And as a courtesy to our 

Web buyers, DoveBid can provide contact information for 

shipping companies that will be attending the auction. 

Thousands of bidders from hundreds of locations around the 

globe have participated in DoveBid Webcast Auctions. It’s 

fast, simple and convenient! Save money on travel expenses 

and next time we will see you ONLINE! 

To schedule an auction, call our CT Office • Phone 203.488.6650 • x418 

3


4 

VANGUARD TYPE V-175-PH-2000 

4-WHEEL DRIVE TRACTOR 

VANGUARD TYPE V-3504 SELF-PROPELLED 

SUGARCANE LOADER 

SUGARCANE LOADERS 

9 – VANGUARD SELF-PROPELLED SUGARCANE LOADERS, (5) TYPE V-3504, 

With John Deere Type 6068TF150 155-HP Turbocharged Diesel Engine, 

Piston-Type Variable Displacement Pump, Lift Capacity 2295kg, Grab 1500kg, 

Grab Opening 65”, Maximum Unloading Height 28’, Maximum Loading Radius 15’, 

Boom Swing 180˚, (4) TYPE V-1900, With John Deere Powertech Type 

6068DF150 125-HP Diesel Engine, Double Gear Type Hydraulic Pump System, Lift 

Capacity 1500-Lbs., Grab Opening 60", Clearance Under Grab 16’11”, Turning 

Radius 7'11" to 12'3", All 4-Wheel Drive, With Hydrostatic Propulsion System 

(37) TRACTORS 

3 – VANGUARD 4-WHEEL DRIVE TRACTORS, (2) TYPE V-175-PH-2000, With John 

Deere Type 6068T 175-HP Turbocharged Engine, 6-Speed Powershift 

Transmission, Heavy-Duty Axles, Steerable & Oscillating Front & Rigid Rear, 

(2) Hydraulic Pumps, Hydraulic-Operated Disc Service Brake, Oscillating Drawer 

Bar, Operating Weight 19,000-Lbs., (1) TYPE V-300-PH, With John Deere Type 

6619A 300-HP Turbocharged Diesel Engine, Type TD-124 12-Speed Twin-Disc 

Transmission, Heavy Duty Steerable Front & Rear Axles, Rigid Chassis, Hydraulic 

System Closed Center, Pressure & Flow Compensated Piston Pump, 4-Section 

Control Valve With (8) Remote Quick Couplers, Weight 17,000kg 

1 – VANGUARD TYPE V-146-AFT 4-WHEEL DRIVE HIGH CLEARANCE TRACTOR, 

John Deere 146-HP Turbocharged Diesel Engine, Fully Hydrostatic Transmission, 

High-Clearance Axles With Hydraulic Motors, Oscillating & Steerable Front Axle, 

Rigid Rear Axle, 100-HP @ 540 RPM PTO 

4 – VANGUARD TYPE V-134-ADL 4-WHEEL DRIVE HIGH CLEARANCE 

TRACTORS, (1) With Boom Sprayer, All With John Deere Type 6968D 146-HP 

Diesel Engine, Fully Hydrostatic Transmission, Hydraulic System With 2-Piston 

Pumps, 100-HP @ 540 RPM PTO, Driven By (1) Hydraulic Motor, Clearance 38", 

Track 69", Wheelbase 188", Total Height 138" 

29 – VANGUARD 4-WHEEL DRIVE/4-WHEEL STEER TRACTORS, (28) TYPE 

V-167-PH, With Detroit Diesel 4-71 Engine, 6-Speed Transmission, (23) Gear-Type 

Hydraulic Pumps, (1) TYPE V-215-PH, With Cummins 215-HP Type C8.3 Diesel 

Engine, 6-Speed Powershift Transmission, Extra Heavy Duty Oscillating & 

Steerable Front Axle, Rigid Rear Axle, Hydraulic System: Variable Displacement 

Load Sensing Piston Pump, 2-Section Control Valve With 

(4) Quick Disconnect Couplers on Rear, HD Oscillating Drawer Bar With 

(2) Positions 

INFIELD TRANSPORTER 

1 – VANGUARD SELF-PROPELLED SUGARCANE HIGH FLOTATION 

TRANSPORTER, On Full Tracks, Type CT 18.50, Load Capacity 636 Ft3, 6 to 7-Tons 

ASSEMBLIES 

12 – CLAAS CORN HEADS 

1 – HARROW TYPE TACH-12 HINGE OFFSET DISC 

1 – HARROW TYPE TAW-24 WHEEL OFFSET DISC 

4 – 130-CU FT FERTILIZER HOPPERS 

4 – TYPE V146-AD SPRAYER SYSTEMS 

1 – TYPE 278 BUSH HOG OFFSET CUTTER 

1 – TYPE VR-7500-530 SUBSOILER/RIPPER 

6 – TRACK SETS, (4) For Claas Dominator 68R, (2) For Claas CC2000 

17 – TYPE V-102478 DRUMS 

11 – HEADERS, (For G-3700) 

1 – TYPE CP-90 CHAIN PULLER GROUP 

1 – SIDE HOE DITCHER GROUP 

WASTE CONTAINERS 

5 – ROLL-OFF WASTE CONTAINERS, (1) 30-YD, (2) 20-YD, (2) 10-YD 

VANGUARD TYPE V-134-ADL 4-WHEEL 

DRIVE HIGH CLEARANCE TRACTOR 

INTELLECTUAL 

PROPERTY 

4 – PATENTS, 

(1) HIGH LIFT, SIDE DUMPING VEHICLE, United 

States Patent/SSN #4327945 Registration #N/A, 

(1) VEHICLE WITH SIDE DUMPING MECHANISM 

OVER THE TOP RAIL, United States 

Patent/SSN #4061235 Registration #N/A, 

(2) SUGAR CANE COMBINE HARVESTER, 

Guatemala Patent/SSN #PI990009 Registration 

#N/A, Australia Patent/SSN #753091 

Registration #N/A 

9 – TRADEMARKS, 

(3) WORD MARK-VANGUARD, United States 

Patent/SSN #76535716 Registration #Unknown, 

United States Patent/SSN #73366711, 

Registration #1263552, United States 

Patent/SSN #72163947 Registration #0758042, 

(1) WORD MARK-GLADIATOR, United States 

Patent/SSN #74490582 Registration #1951833, 

(1) WORD MARK-INTER-AMERICAN SUGAR 

CANE SEMINARS, United States Patent/SSN 

#73389026 Registration #1339579, 

(1) WORD MARK-INTER-AMERICAN, United States 

Patent/SSN #72170071 Registration #0763368 

(3) WORD MARK-VANGUARD LOGO, 

Honduras Patent/SSN #N/A Registration #51.631, 

Zanzibar Patent/SSN #N/A Registration #167/88, 

Zanzibar Patent/SSN #N/A, Registration #168/88 

Various engineering drawings, blueprints, and 

specifications for machinery and equipment 

manufactured by Inter-American Transport Equipment 

Company, Ltd. 

@ 

See us on the web 




OVER 

$12,600,000 

PARTS 

INVENTORY 

For a complete 

inventory list, please visit 


WHEN YOU NEED TO KNOW 

WHAT’S IT WORTH 

DoveBid Valuation Services for all of Your Valuation Needs 

Secured lenders look to DVS for precise liquidation values, the 

Global 4000 for required financial reporting and taxation 

needs. Worldwide offices, unparalleled expertise and integrated 

auction services make DVS the answer. 

For more information, 

call 800.665.1043 

® 

11 – ENGINES, (2) CUMMINS 400-HP TYPE N-14, 

(1) DETROIT DIESEL TYPE 6-71T, (2) JOHN DEERE TYPE 6068DF150, 

(1) JOHN DEERE TYPE 6068TF150 (3) JOHN DEERE TYPE 6466A, 

(1) MERCEDES BENZ TYPE OM-442 (REBUILT), 

(1) MERCEDES BENZ TYPE OM-443 (REBUILT) 

25 – TRANSMISSIONS, (19) CLAAS, (3) CLAAS RIGHT, 

(3) FUNK 4-SPEED, (No Pk, Brake) 

56 –HYDROSTATIC MOTORS 

40 –HYDROSTATIC PUMPS 

QUANTITY OF ENGINE PARTS, Including: Actuators, Air Chambers, Air 

Compressors, Air Filter Assemblies, Alternators, Belts, Capacitors, Filters, 

Starters, Etc. 

APPROXIMATELY (1000) TIRES, In Various Types & Sizes, 

(For a complete lot catalog, please visit www.dovebid.com) 

APPROXIMATELY (300) RIMS, In Various Types & Sizes, 

(For a complete lot catalog, please visit www.dovebid.com) 

QUANTITY OF CABS, Including: Claas, C & S and Soto Import 

APPROXIMATELY (1000) HYDRAULIC CYLINDERS 

APPROXIMATELY (1700) HYDRAULIC PUMPS 

THOUSANDS OF BEARINGS, Including: Cones, Housings, Inner & Outer 

Races, Nuts, Plates, Rod & Cups, Seals, Shells, Units, Washers, Etc. 

OVER 20,000 CUTTER BLADES, ADAPTERS, HOLDERS, SEGMENTS & 

WIPERS 

APPROXIMATELY (1200) FASTENERS, Including: Nuts, Bolts, 

U-Bolts, Washers, Backup Washers, Screws, Etc. 

Rim Assemblies, Clamps, Spacers & Washers, Etc. 

Torque Converters & Pump Drives, Torque Limiters, Torque Arm Assemblies, Etc. 

Brakes, Brakes Spindles, Brake Assemblies, Discs, Rotors, Hoses, Etc. 

Belts, Guards, Guides, Sets, Tension Pins & Drives, Etc. 

Quantity Of Axles, Including: (6) A19 71.5" Track With BR2S ABS, (8) A26 

84" Track (No Brakes), (47) Assemblies, (No Brakes) With Weld-On Spiders, 

82" Track Equivalent to A-22, (5) Assemblies, Rigid (For V167PH Tractor), 

(9) Steering Assemblies, 22.111 Overall Ratio, (6) Steering Fronts, 

(For V350-400-V525 Tractors), (6) Steering Rears (For Tractors), (91) Assorted 

Axles, Axle Parts, Including: Aligning Plates, Carrier Assemblies, Channels, 

Chock Bars, Housings, Seats, Spindles, Stop Brackets, Etc.O-Rings, Brake 

Yokes, Brackets, Windows, Breathers, Bronze Bushings, Brush Holders, Buffer 

Bolts, Bulbs, Hydraulic Hoses & Fittings, Radiators, Radiator Hoses, Chains, 

Cables, Cam Shafts, Cam Rollers, Clam Shells, Canopies, Springs, Chassis 

Assemblies, Clutch Assemblies, Clutch Parts, Control Cables, Couplings & 

Assemblies, Deflectors, Diaphragms, Differentials, Directional Control Valves, 

Doors, Double Hydraulic Pumps, Sprockets, Dowel Pins, Drawbars, Drive Lines 

& Assemblies, Driver Seats, Elevator Housings, Elevator Screws, Exhaust Pipes, 

Extractor Blades & Parts, Fans & Fan Assemblies, Filter Assemblies, Flow 

Control Valves, Flow Dividers, Flow Regulators, Flywheels & Parts, Fuel Pumps 

& Parts, Gages, Gaskets, Gears & Wheels, Impellers, Injection Lines & Parts, 

Steering Arms, Wheels & Inserts, Pulleys, Knives, Knife Blades, Etc. 

An unaudited excel file available for download at www.dovebid.com 

5 

To schedule an auction, call our CT Office • Phone 203.488.6650 • x418


1999 

HYUNDAI MODEL 20M CNC PRECISION 

SLANT BED TURNING LATHE 

DISKUS-WERKE D5R600/1000 40" 

ROTARY SURFACE GRINDER 

CINCINNATI MODEL 600-H SERIES 14 

600-TON HYDRAULIC PRESS BRAKES 

6 

CNC TURNING CENTER 

1 – HYUNDAI 20M CNC PRECISION SLANT BED 

TURNING LATHE, S/N 6-001 (1999), Siemens 

Sinumerik CNC Control, 19-HP Spindle Motor, 

Kitagawa 3-Jaw Chuck, Max. Swing 620mm, Swing 

in the Carriage 594mm, Max. Process Dia. 294mm, 

Standard Process Dia. 150mm, Distance Between 

Section of Main Shaft & Section of Turret 180mm to 

686mm, Process Dia. of Max. Bar 70mm, Max. Load 

150kG, Main Shaft Shape ASA A2-8, Morse No. 4 

Taper, Spindle Speeds 40 to 4000 RPM, Turret Type 

VDI 12 Angle, (12) Tools, Power Clamp, Transfer 

Shaft: X 270mm, Z 510mm, Bed Flat Shape, Width 

340mm, Retrofitted With CNC Enhancements, 

Automatic Bar Feeder, Bar Cap. 51”L, Remote Touch 

Pad Control, Mayfran Incline Flat Chip Conveyor* 

CNC HYDRAULIC BRAKE 

1 – STRIPPIT/PROMECAM CF275-13 275-TON CNC 

HYDRAULIC PRESS BRAKE, S/N STPC-250-40- 

123 (1986), Bed 13'5", 138" Between Housings, 

Throat 12", Stroke 9-3/4", Shut Height 15-3/4", 

Cybelec CNC Control, 25-HP Hydraulic System* 

PRESS BRAKES 

2 – CINCINNATI 600-H SERIES 14 600-TON 

HYDRAULIC PRESS BRAKES, Bed Length 20', 24" 

L & R Horns, Distance Between Housings 174"* 

2 – CINCINNATI 400H 400-TON HYDRAULIC PRESS 

BRAKES, Bed Length 16'* 

1 – CINCINNATI 90-10' 90-TON PRESS BRAKE, 126" 

Between Housings, Stroke 3"* 

SHEARS 

1 – CINCINNATI 3DLS 20’ X 1/2” HYDRAULIC 

SQUARING SHEAR, S/N 39388, 10' Right-Hand 

Squaring Arm, Front-Operated Power Back Gage* 

1 – CINCINNATI 2512 12’ X 3/8” POWER SQUARING 

SHEAR, 12' Squaring Arm, Front-Oper. Back Gage* 

1 – KLING 750 3/4" ROTARY SHEAR, Throat 50"* 

FABRICATION CENTER 

1 – STRIPPIT FC1500-45 45-TON NC FABRICATION 

CENTER, 16-Pos. Turret, 3-Finger 80" Plate Holder, 

Travel 80" X 80", Hypertherm HT-400 Plasma Cutting 

System With Cooler* 

IRONWORKER 

1 – MUBEA KBL SIZE 2-1/2 95-TON UNIVERSAL 

IRONWORKER, Shear/Coper-Notcher/Punch* 

HYDRAULIC PUNCH 

1 – MUBEA KL100 HYDRAULIC PUNCH, Triple Gang, 

Adjustable Punch, Auto. Gaging & Clamping* 

BENDING ROLLS 

1 – WEBB 600 R3LR 4' INITIAL-PINCH SLIP ROLL 

1 – JAMES BENNIE WORKS 19 PYRAMID-TYPE 

PLATE BENDING ROLL, 8' X 38” Heavy Roll, 6' X 

1/8" Light Roll* 

1 – HENDLEY & WHITTEMORE ROD & BAR ROLL, 

Angle 3" X 3" X 1/4"* 

PIPE & TUBE BENDERS 

1 – ERCOLINA SUPER TOP BENDER 

MODEL 030 ELECTRIC PIPE BENDER, 

S/N 3980190 (1998) Capacity 1/4" to 

2-1/2", With (16) Sets of Mandrels, Type 

TB-100 Inverter System Control, Type 

A40/P 2-Axis Positioning Device 

1 – WALLACE 520 HYDRAULIC PIPE 

BENDER, With Extractor* 

1 – OLSEN ROYAL OAK 50DB POWER 

FLARING MACHINE* 

PLASMA CUTTER 

1 – ESAB CNC FALCON H-GXC-1000 

GANTRY SHAPE CUTTER, 12’ X 25' 

Water Table, Burny CNC Control, 

Hypertherm Plasma Cutting System* 

GAP FRAME PRESS 

1 – DREIS & KRUMP CHICAGO 46-M GAP 

FRAME PRESS, Bed Length 6’* 

BORING MILLS 

1 – SUMMIT AFD-100 4" TABLE-TYPE 

HORIZONTAL BORING MILL, 48" X 60" 

Rotary Table, 3-Axis Digital Readout, 

Outboard Support* 

1 – H.W. KERNS 3" HORIZ. BORING MILL, 

30” X 30" Sub Table, Rotary Table, 2-Axis 

Digital Readouts, Outboard Support* 

VERTICAL MILLS 

2 – LAGUN VERTICAL MILLS, (1) FT-2, 

Table 9" X 48", (1) FT-1, Table 9" X 42"* 

LATHES 

1 – GURTZPE M-SUPER 24”/32" X 166" 

C.C. GAP BED LATHE, (18) Spindle 

Speeds 16 to 1250 RPM* 

1 – LEHMANN HYDATROL 28" X 72" C.C. 

LATHE, Taper Attachment* 

1 – CLAUSING COLCHESTER MODEL 6 

15”/21" X 48" C.C. BED LATHE* 

1 – AJAX 22" X 80" C.C. LATHE, (24) 


1 – CMT-TORTONE URSUS-250 20" X 80" 

C.C. LATHE, (12) Spindle Speeds, Hole 

Thru Spindle 51mm* 

1 – QUALTERS & SMITH MODEL H 19" X 

80" C.C. LATHE, Tracer Attach.* 

1 – CIMA MODEL 16 17" X 70" C.C. 

GEARED HEAD LATHE* 

1 – GISHOLT 3L 27" X 72" C.C. GEARED 

HEAD LATHE, Power Tailstock* 

1 – GISHOLT 3L TURRET LATHE* 

*All items marked with an asterisk are owned 

by General Electric Capital Business Asset 

Funding Corporation, as Secured Party of 

Inter-American Technologies Company and are 

a separate estate from the remainder of the 

equipment in this brochure. 

1986 

STRIPPIT/PROMECAM M CF275-13 

275-TON CNC HYDRAULIC PRESS BRAKE 

CINCINNATI MODEL 3DLS 20’ X 1/2” 

HYDRAULIC SQUARING SHEAR 

SURFACE GRINDERS 

1 – DISKUS-WERKE D5R600/1000 40" 

ROTARY SURFACE GRINDER, 36” 

Electromagnetic Chuck, 23" Wheel* 

1 – HOBROUGH BROTHERS 6" X 18" 

SURFACE GRINDER, Perm. Magnetic 

Chuck, 1-HP Direct Drive Spindle* 

RADIAL DRILLS 

1 – CINCINNATI-BICKFORD 6' X 16" 

COLUMN RADIAL DRILL, (38) 


1 – AMERICAN HOLE WIZARD 5' X 13" 

COLUMN RADIAL DRILL* 

1 – IKEDA RM1575 5' X 13" COLUMN 

RADIAL DRILL, (12) Speeds 30 to 

1500 RPM, Box Table* 

DRILLS 

1 – NATCO HOLESTEEL 24-SPDL. DRILL* 

1 – CLAUSING 2276 20" VARIABLE 

SPEED FLOOR-TYPE DRILL* 

1 – BROWN & SHARPE NO. 1 30" 

PRODUCTION TURRET DRILL* 

INSPECTION EQUIP. 

1 – TOGOSHI SEIKI HARDNESS TESTER 

1 – DETROIT DIESEL POWERED HYD. 

TEST STAND, 4-71 Engine 

1 – CUSTOM-BUILT HYDRAULIC TESTER 



VOLVO/GM 6X4 

TANDEM-AXLE 

LONG NOSE 

TRUCK TRACTOR 

1995 

SAND BLAST ROOM & 

PAINT SPRAY BOOTH 

1 – CUSTOM-BUILT SAND BLAST ROOM, Size 27'W X 12'H X 51'L, 

Empire Type 247106 Pneumatic Recovery System With Dust 

Collector, Reclamation Unit, 650 cu ft Pressure Vessel, Empire Sweep 

Trough, Grit Miser, BH-6 Hood* 

1 – BINKS 22-1/2'W X 65'L X 16’H PAINT SPRAY BOOTH, Lights, 

Exhaust & Filtration, (2) Graco Electric Airless Portable Paint 

Sprayers* 

TRUCK TRACTORS 

1 – 1995 VOLVO/GM 6X4 TANDEM-AXLE LONG NOSE TRUCK 

TRACTOR, V/N 4V1JDBRFXSN841908, Detroit Diesel Type 

DD94-SER60-11.1l.3 Engine, Fuller RTX-12710B.1 Transmission, 

Front Axle Capacity 12,000-Lbs., Type DX402 Rear Axles, Sliding 5th 

Wheel, Dual Saddle Tanks, Air Conditioning 

1 – INTERNATIONAL 6X4 COE TRUCK TRACTOR 

1 – 1979 MACK 6X4 COE TRUCK TRACTOR, V/N F786ST14708 

FLATBED TRUCKS 

1 – INTERNATIONAL MODEL S-1800 5-TON FLATBED TRUCK, Diesel 

Engine, Split Transmission, 21.5'L Steel Dump Deck 

1 – 1986 FORD F-350 FLATBED TRUCK, V/N 1FDJF371XGNA01023 

TRAILERS 

1 – VANGUARD TC64170756 51’ DOUBLE-DROP DETACHABLE 

GOOSENECK TRAILER, V/N 1W9A11D20PS61059, 10' X 26' Deck 

With 11' Poop Deck, 21" Extensions on Lower Deck, 12V Hydraulics 

1 – WITZL'O 45’ DOUBLE DROP DETACHABLE GOOSENECK 

TRAILER, V/N 1W8A11027XS0000621, 120” X 270" Deck With 

96" X 120" Poop Deck, 12V Hydraulic Pump & Lifting Ram 

1 – VANGUARD 36' ALLSTEEL SINGLE-DROP LOWBOY TRAILER 

3 – FOUNTAIN ALLSTEEL FLATBED TRAILERS 

PICKUP TRUCKS 

2 – 1991 FORD F-250 3/4-TON PICKUP TRUCKS, V/Ns 

1FTHF25M8MNA94582, 1FTHF25M6MNA94564, Diesel Engine 

3 – CHEVROLET 1/2-TON PICKUP TRUCKS, (1) MODEL W/T 1500, 

V/N 1GCEC14Z5PE102273 (1992), (1) CHEYENNE, V/N 

1GCEC147Z2ME127787 (1991), (1) V/N GCCT14R4K8159272 (1989) 

YARD CRANE 

1 – BLH AUSTIN WESTERN 12,000-LB. DIESEL YARD CRANE, 

4-Wheel Drive & Steer, Outriggers, 3-Stage Boom Mast 

FORKLIFTS 

1 – ALLIS-CHALMERS ACP-225-D-PS-DUAL 22,000-LB. CAPACITY 

DIESEL FORKLIFT TRUCK, Lift 141", 96" Forks, Dual Tires, ROPS 

1 – CLARK MODEL CHY120 12,000-LB. CAPACITY LPG FORKLIFT 

TRUCK, S/N CHY120B-53-2000, With Dual Tires* 

4 – CLARK 5000-LB. LPG FORKLIFT TRUCKS, (3) CGC-25, (1) 

GCX25, 3-Stage Clear View Mast, Lift 189", Side Shift, (1) C-500* 

(13) BRIDGE CRANES 

1 – ROBBINS & MEYERS 10-TON X 63' SPAN BRIDGE CRANE* 

4 – ROBBINS & MEYERS 5-TON X 50' SPAN DOUBLE GIRDER TOP 

RIDING BRIDGE CRANES* 

5 – 5-TON X 36' SPAN BRIDGE CRANES, (2) ROBBINS & MEYERS, 

(2) SPARKNA, (1) SPACEMASTER* 

3 – 2-TON X 36' SPAN BRIDGE CRANES, (2) YALE, (1) CM* 

APPROXIMATELY 1500’ OF HANGING CRANE RAILS, With Electrics* 

CLARK MODEL CHY120 

12,000-LB. CAPACITY LPG 

FORKLIFT TRUCK 

CLARK MODEL GCX25 5000-LB. 

CAPACITY LPG FORKLIFT TRUCK 

BLH AUSTIN 

WESTERN 

12,000-LB. 

DIESEL YARD 

CRANE 

MATERIAL HANDLING EQUIPMENT 

20 – WALL-MOUNTED JIB CRANES, CM 1-Ton Electric Chain Hoists* 

3 – STRATO MODEL 27300 VACUUM LIFTERS* 

OVER (300) CUSTOM-BUILT 53"W X 45"D FORKLIFT STOCK STORAGE 

BIN/HOPPERS, 25” & 41”H* 

SCALES 

1 – FAIRBANKS 10,000-LB. CAPACITY DIGITAL PLATFORM SCALE 

2 – UNITED 1000-LB. CAPACITY PLATFORM SCALES 

1 – TOLEDO 125-LB. CAPACITY BENCH-TOP DIAL-TYPE SCALE 

AIR COMPRESSORS & AIR DRYERS 

1 – INGERSOLL-RAND MODEL PAC-50 60-HP SKID-MOUNTED 

PACKAGE AIR COMPRESSOR* 

1 – GARDNER-DENVER 40-HP AIR COMPRESSOR, With Pac-Air Dryer 

1 – KELLOGG-AMERICAN MODEL 128CK08-408 25-HP HYDROVANE 

HORIZONTAL TANK-MOUNTED AIR COMPRESSOR, S/N 

128-001711-0003, Hour Meter Reading 8343 Hours* 

2 – WORTHINGTON 25-HP 2-STAGE HORIZONTAL TANK-MOUNTED 

AIR COMPRESSORS, Size 6/6/4.5X2.75 

1 – ULTRA AIR MODEL UA-100-AC REFRIGERATED COMPRESSED AIR 

DRYER, S/N U00056, With Inner-Cooler 

1 – COMPAIR-KELLOGG K3D2 REFRIGERATED AIR DRYER* 

SHOP & FACTORY 

1 – MAGLINER 36’ MOBILE LOADING RAMP 

1 – HARLEY-DAVIDSON 3-WHEEL ELECTRIC GOLF CART 

2 – OSTER PIPE THREADERS, (1) MODEL 784, With Capacity 1/2” to 4" 

Pipe, 3/8” to 3" Bolt* (1) MODEL 782, With Capacity 1/4” to 2-1/2" Bolt* 

1 – RIDGID MODEL 300 PIPE THREADER* 

1 – CUSTOM-BUILT 25-TON HYDRAULIC H-FRAME PRESS, 20-HP* 

1 – 4-POST UP-ACTING HYDRAULIC PRESS* 

1 – KMT 315/350 ABRASIVE CUTOFF SAW, Miter Vise & Coolant System* 

2 – EVERETT MODEL 14X16 7-1/2-HP ABRASIVE CUTOFF SAWS 

4 – DOUBLE-END PEDESTAL GRINDER* 

1 – BALDOR MODEL 762RE 1/2-HP DOUBLE-END BENCH GRINDER* 

1 – BLACK & DECKER 3/4" MAGNETIC BASE DRILL* 

Hose End Crimper, Pump/Filtration Unit, Coil Dispensing Racks, Work 

Benches, Welding Tables, Racks, Carts, Pedestal Fans, Torch Outfits, Hand 

Tools, Case Sealer, Box Stapler, Pallet Jack, Safety Ladders, Etc. 

STEEL INVENTORY 

OVER 640,000-LBS. OF STEEL STOCK, Including: Heavy Plate, Sheets to 

6' X 40', Angles, Channel, Pipe, Bars, Rod; Bronze Bushing Stock to 

6" Dia., (For complete listing in the lot catalog, please visit www.dovebid). 

*All items marked with an asterisk are owned by General Electric Capital 

Business Asset Funding Corporation, as Secured Party of Inter-American 

Technologies Company and are a separate estate from the remainder of the 

equipment in this brochure. 

To schedule an auction, call our CT Office • Phone 203.488.6650 • x418 

7

Global Provider of Capital Asset Auction & Valuation Services 

Over $3.3 billion sold in 22 asset categories and over $34 billion in assets valued across 15,000 appraisals since 1990. 

Auctioneers, Sale Advisors & Appraisers 

Worldwide Headquarters 

1241 East Hillsdale Boulevard 

Foster City, California 94404 

650.571.7400 • Fax: 650.572.1502 


Customer Service 800.665.1042 

® 

Presorted 

First Class Mail 

U.S. Postage 

PAID 

Detroit, Mich. 

Permit No. 1904 

Return Service Requested 

For further information, 

please contact our Connecticut Office 

Phone 203.488.6650 • x418 

DoveBid Webcast Auction 

• Bid live in Miami, Florida 

• Bid live over the internet at www.dovebid.com 

By order of the U.S. Bankruptcy Court, Southern District of 

Florida, Miami Division, Case No. 03-43480-BKC-RAM, 

Chapter 7, Bankrupt assets of 

INTER-AMERICAN TRANSPORT 

EQUIPMENT COMPANY, LTD. 

WEBCAST 

AUCTION 

August 24, 2004 

Large Offering of Agricultural Equipment 

& Metalworking Machinery, Featuring: 

Sugarcane Harvesters, Loaders, Tractors, 

Material Handling, Fabricating & 

Toolroom Equipment, Large Parts 

Inventory and Intellectual Property 

Upcoming auctions & private treaty sales • www.dovebid.com 

JULY 20: PRODUCTS SUPPORT INCORPORATED – (ONLINE) 

CNC Machining, Drilling & Tapping Centers, Lathe & Press Brake. www.dovebid.com 

(Jessup, MD USA) 

JULY 19-22: ENRON CORPORATION #10 FEATURED ONLINE AUCTION 

– (ONLINE) Fine Art Pieces. www.dovebid.com (Houston, TX) 

JULY 20: DATAVISION, INC. – (WEBCAST) 

Integrator of Wireless & Mobile Technology Featuring: Bar Code Scanning and RF 

Warehouse Equipment. Warminster, PA USA 

JULY 20: ENRON CORPORATION #10 WEBCAST AUCTION – 

(WEBCAST) 

Computers, Furniture, Telecommunications, Artwork, And Much More. Houston, TX 

JULY 21: ELECTRONIC ASSEMBLY EXCHANGE #8 – (ONLINE) 

SMT/PCB, Semiconductor, Opto-Electronics, Disk Mfg., Electronic Test & 

Measurement Equipment. www.dovebid.com (Multiple Locations in USA) 

NOW-JULY 22: FABRIC RESOURCES, INC. – (SEALED-BID) Weaving & 

Yarn Preparation Equipment, Featuring: (42) Nissan Air Jet Looms, Cranks, Calenders, 

Rolls & Slashers. Bid submission deadline: 7/22/04 2:00 PM CDT. Mullins, SC USA 

LEASE FINANCING AVAILABLE 

Maximize your Bidding Power! 

Get PRE-APPROVED for up to $75,000 USD in 

'Same-As-Cash-On-Auction-Day' Lease Financing. 

For more information, call the 

AuctionLease Department at 800.438.1470 

or apply online at www.AuctionLease.com. 

NEED HELP WITH SHIPPING? 

As a courtesy to our buyers, DoveBid can provide 

contact information for shipping companies scheduled to attend 

this auction.For details, please visit DoveBid’s Website 

at www.dovebid.com or call our 

customer service department at 800.665.1042. 

©2004 DOVEBID, ALL RIGHTS RESERVED • PRINTED IN USA • #INTE0602 • CA Bond# 69567717 

DoveBid and the DoveBid logo are registered trademarks of DoveBid, Inc. 

Auctioneers & Licenses: DoveBid, Inc. #AB-0000387, Kirk Dove #AU-0000692, Scott C. Lonkart #AU-0002485 

Complete Terms & Conditions are contained in the Sale Catalog and on the website at www.dovebid.com. 

Please review the Terms and Conditions prior to placing bids on any items. Worldwide Headquarters: Foster City, California

InterAmerican Virtual Brochure

Create successful ePaper yourself

Delete template?

Save as template?