GEIGER-GJ56.. – Venetian blinds motor with mechanical or ...

Product Datasheet
GEIGER-GJ56.. – Venetian blinds motor with
mechanical or electronic end stops or electronic end stops
■■Venetian blind motors series GJ56.. and GJ56..e
Our electric motors GJ56.. with mechanical end stop and GJ56..e with
electronic end stop have proved successful in daily use millions of
times.
Both drives are characterized by their reliable and proven
components, the safe and quick installation in all standard head rails
and the optimum torque values. Different torque versions are available
on request.
■■Characteristics of both series at a glance
Motor for Venetian blinds GJ56..
• Easy adjustment of the end stops by means of self-locking buttons
• Safe fitting in all current head rails – no tools needed
• Removable cable
• Available with 3, 6, 10 and 20 Nm torque
Motor for Venetian blinds GJ56..e
• Three end stops, easy to adjust with the remote control cable
• Overload recognition to protect the blinds of any damage
• Parallel connection of several motors is possible without cut-off relay
• Connection by means of a current switch for venetian blinds
• If a working position is needed, a non-lock switch should be used
• Available with 3, 6,10 and 18 Nm torque
Run-time optimized GJ56.. and GJ56..e
• Most suited for applications where higher running time is required
Venetian blind motor GJ56..e1
• Moves directly to the intermediary position (direct shade position)
Venetian blind motor GJ56..e2
• Always moves first to the lower end position, turns round and moves to the
intermediary position (indirect shade position)
Venetian blind motor GJ56..e3
• Always moves first to the lower end position, turns round and moves to the
intermediary position (indirect shade position)
• Offers additional protection of the device when the bottom rail is frozen on the
window-sill
Contents
Venetian blind motors series
GJ56.. and GJ56..e...........................1
Characteristics of both series at a
glance...............................................1
Technical values................................2
Technical data GJ56.........................3
Technical data GJ56..e.....................4
Accessories ......................................5
GJ56..
GJ56..e

Made by GEIGER
GEIGER relies on Germany
as production location: the
GEIGER-GJ56.., like all GEIGER
motors, are developed and produced
in Germany. This situation
allows an optimal combination of
R & D, manufacturing processes
and quality management.
Our clients benefit from
• low noise motors
• low energy consumption, a big
plus factor today
• low heating of the engine
which means a longer period
of time for adjustment
purposes
• high quality radio system
Venetian blind motor GJ56..e4
• Always moves first to the lower end position, turns round and moves to the
intermediary position (indirect shade position)
• Offers additional protection of the device when the bottom rail is frozen on the
window-sill
• The torque shutoff in the upper end position assures that the slat pack reaches
the highest point
Venetian blind motor GJ56..e5
• Offers all the advantages of the electronic end stop (intermediary position
excepted)
• Setting of the end positions with a setting cable which allows simultaneous
current supply of UP and DOWN directions
■■Technical values
Height of shutter [m]
6
5
4
3
2
1
GJ5603
GJ5606
Winding radius:
11 mm
Thickness of pull strap: 0,27 mm
Weight of louvers: 1,4 kg/m 2
Weight of bottom strip: 0,81 kg/m
Safety factor: 30%
Torque Venetian blind
GJ5610
GJ5616
GJ5620
GJ5618
1 2 3 4 5 6 7
Width of shutter [m]
2 Subject to technical modifications | 100W0593 en 0312

geprüfte
Sicherheit
geprüfte
Sicherheit
■■Technical data GJ56..
L
75,4 138
59
45
Ø 54,6
30 17,3 10,1
20
22
54,6
Technical data GJ56.. with mechanical end stop (standard mechanical)
GJ5603k GJ5606k GJ5610 GJ5620
Voltage 230 V~/50 Hz 230 V~/50 Hz 230 V~/50 Hz 230 V~/50 Hz
Current 0,40 A 0,40 A 0,60 A 0,85 A
Cos Phi (cosj) > 0,95 > 0,95 > 0,95 > 0,95
Inrush current (factor) x 1,2 x 1,2 x 1,2 x 1,2
Power 90 W 93 W 135 W 190 W
Torque 3 Nm 6 Nm 10 Nm 2 x 10 Nm
Speed 26 1/min 26 1/min 26 1/min 26 1/min
Protection class IP 54 IP 54 IP 54 IP 54
Limit switch range 80 rpm 80 rpm 80 rpm 80 rpm
Operating mode KB 4 min KB 4 min KB 4 min KB 4 min
Length (L) 299 mm 299 mm 309 mm 336 mm
Diameter 55 mm 55 mm 55 mm 55 mm
Weight approx 1,50 kg approx 1,50 kg approx 1,70 kg approx 2,2 kg
DE
V
Technical data GJ56.. with mechanical end stop (run-time optimized version)
Special model
GJ5606 GJ5616 GS5624
Voltage 230 V~/50 Hz 230 V~/50 Hz 230 V~/50 Hz
Current 0,40 A 0,70 A 0,40 A
Cos Phi (cosj) > 0,95 > 0,95 > 0,95
Inrush current (factor) x 1,2 x 1,2 x 1,2
Power 90 W 150 W 90 W
Torque 6 Nm 2 x 8 Nm 2 x 12 Nm
Speed 26 1/min 26 1/min 5 1/min
Protection class IP 54 IP 54 IP 54
Limit switch range 80 rpm 80 rpm 80 rpm
Operating mode KB 6 min KB 6 min KB 6 min
Length (L) 304 mm 336 mm 311 mm
Diameter 55 mm 55 mm 55 mm
Weight approx 1,60 kg approx 2,20 kg approx 1,70 kg
DE
V
Subject to technical modifications | 100W0593 en 0312 3

geprüfte
Sicherheit
geprüfte
Sicherheit
■■Technical data GJ56..e
L
30 77,35 138
54
17,7
Ø 54,6
Technical data GJ56.. with electronic end stop (standard electronic)
GJ5603ke GJ5606ke GJ5610e GJ56018e
Voltage 230 V~/50 Hz 230 V~/50 Hz 230 V~/50 Hz 230 V~/50 Hz
Current 0,40 A 0,40 A 0,60 A 0,80 A
Cos Phi (cosj) > 0,95 > 0,95 > 0,95 > 0,95
Inrush current (factor) x 1,2 x 1,2 x 1,2 x 1,2
Power 90 W 93 W 135 W 180 W
Torque 3 Nm 6 Nm 10 Nm 2 x 9 Nm
Speed 26 1/min 26 1/min 26 1/min 26 1/min
Protection class IP 54 IP 54 IP 54 IP 54
Limit switch range 200 rpm 200 rpm 200 rpm 200 rpm
Operating mode KB 4 min KB 4 min KB 4 min KB 4 min
Length (L) 301 mm 301 mm 311 mm 338 mm
Diameter 55 mm 55 mm 55 mm 55 mm
Weight approx 1,50 kg approx 1,50 kg approx 1,70 kg approx 2,20 kg
DE
V
Technical data GJ56.. with electronic end stop (run-time optimized version)
Special model
GJ5606e GJ5616e GS5603e
Voltage 230 V~/50 Hz 230 V~/50 Hz 230 V~/50 Hz
Current 0,40 A 0,70 A 0,75 A
Cos Phi (cosj) > 0,95 > 0,95 > 0,95
Inrush current (factor) x 1,2 x 1,2 x 1,2
Power 90 W 150 W 170 W
Torque 6 Nm 2 x 8 Nm 3 Nm
Speed 26 1/min 26 1/min 124 1/min
Protection class IP 54 IP 54 IP 54
Limit switch range 200 rpm 200 rpm 200 rpm
Operating mode KB 6 min KB 6 min KB 4 min
Length (L) 306 mm 338 mm 335 mm
Diameter 55 mm 55 mm 55 mm
Weight approx 1,60 kg approx 2,20 kg approx 2,20 kg
DE
V
4 Subject to technical modifications | 100W0593 en 0312

7
■■Accessories
Coupling pieces
Ref.-Nr.
Output
M56E369 Hexagonal 6 mm, 4 threaded pins
21,5
6
M56E398 Hexagonal 6 mm, 2 threaded pins
21,5
6
M56E235 Hexagonal 7 mm
21,5
7
M56E248 Hexagonal 10 mm
21,5
10
M56E247 Hexagonal 11 mm
21,5
11
M56E232 Hexagonal 11 mm, 2 threaded pins
21,5
11
M56K064 Square 7 mm, 2 threaded pins
21,5
M56K054 Square 12 mm
21,5
12
M56K063 Square 12 mm, 2 threaded pins
21,5
12
M56K061 Grooved tube, flat groove
21,5
11,3
14
M56K119 Grooved tube, deep groove
21,5
4,5
9,5
14
4
Plastic clips for screw fixation
Ref.-Nr. Axle height head rail (height by width) Output
M56E110 30,5 mm - 20 Nm
M56E231 35,5 mm - 20 Nm
Self-adhesive damping film for screw fixation
Ref.-Nr. Axle height head rail (height by width) Output
M56K155 30,0 mm - 20 Nm
M56K062 30,5 mm - 20 Nm
Subject to technical modifications | 100W0593 en 0312 5

Fixation kits for different head rails and axle heights
Fixation kits with brackets
Ref.-Nr. Axle height head rail (height by width) Output
M56F580 29 mm 51 x 57 mm up to 10 Nm
M56F583 29 mm 51 x 57 mm 10 - 20 Nm
M56F581 29 mm 56 x 58 mm up to 10 Nm
M56F584 29 mm 56 x 58 mm 10 - 20 Nm
M56F582 30,5 mm 51 x 57 mm up to 10 Nm
M56F585 30,5 mm 51 x 57 mm 10 - 20 Nm
Fixation kits with clamping bridges
Ref.-Nr. Axle height head rail (height by width) Output
M56F586 34 mm 66 x 65 mm up to 10 Nm
M56F8587 34 mm 66 x 65 mm 10 - 20 Nm
M56F588 32 mm 66 x 78 mm up to 10 Nm
M56F589 32 mm 66 x 78 mm 10 - 20 Nm
M56F595 29 mm 57 x 51 mm up to 10 Nm
M56F596 29 mm 57 x 51 mm 10 - 20 Nm
6 Subject to technical modifications | 100W0593 en 0312

Extension for limit stop switch
Ref.-Nr.
M56E288
Note
Extension to be plugged-in
Setting switch
Ref.-Nr.
M56K144
M56F150
M56F151
M56B265
Note
with Hirschmann STAK3 cable socket (D)
with Hirschmann STAK3 cable socket (CH)
with service terminal (D)
adapter cable with service terminal
Black connecting cable for indoor and outdoor application
Ref.-Nr. Length Note
M56K067
90 cm GEIGER plug / open end cable
M56E386
200 cm GEIGER plug / open end cable
M56E219
300 cm GEIGER plug / open end cable
M56E428
700 cm GEIGER plug / open end cable
M56E267 1500 cm GEIGER plug / open end cable
M56K066
50 cm GEIGER plug / Hirschmann plug STAS3
M56K042
90 cm GEIGER plug / Hirschmann plug STAS3
M56E378
150 cm GEIGER plug / Hirschmann plug STAS3
M56E281
200 cm Hirschmann STAK3 cpl. / Hirschmann STAS3-St.
M56E399
150 cm Hirschmann STAK3 cpl. / open end cable
Mounting accessories
Ref.-Nr.
M56E143
Note
Square socket key
Accessories for the hard-wired connection
Ref.-Nr.
GU0021
Note
Time switch with automatic, manual and random
functions
GU0001
The cut-off relay GU0001 allows the parallel connection
of two blind motors with mechanical end stop.
Subject to technical modifications | 100W0593 en 0312 7

Accessories for operation via radio
The GEIGER radio system allows a quick and convenient operation of your blinds. Various remote controls make it easy
to operate individually a great number of blinds.
A clock-controlled transmitter enables the automatic opening and closing of your blinds. A wind sensor helps protect
your blind from damage caused by strong wind.
The name GEIGER Antriebstechnik is synonymous
world wide for drive solutions in the sun
protection area.
Today we are with more than 300 employees one
of the leading manufacturers of mechanical and
electrical drives for Venetian blinds, awnings and
rolling shutters.
GEIGER is a well-known, mid-sized company
which offers world wide drive components for the
sun protection systems.
Gerhard Geiger GmbH & Co. KG
Schleifmühle 6
D-74321 Bietigheim-Bissingen
Phone +49 (0) 71 42 / 938-300 (Sales)
Fax +49 (0) 71 42 / 938-230
www.geiger-antriebstechnik.de
info@geiger-antriebstechnik.de
100W0593 en 0312