You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Hawkeye</strong> <strong>Industries</strong> Inc.<br />
<strong>Hawkeye</strong> <strong>Industries</strong> Inc. markets Aqua-Buff ®<br />
polishing compounds and Duratec ® polyester<br />
and vinyl ester products through independent<br />
distributors worldwide. Duratec includes<br />
putties, fairing primers, primers and coatings<br />
for pattern and mold repairing, resurfacing and<br />
surfacing; in-mold primers for composite part<br />
manufacturing; high-gloss coatings for marine,<br />
automotive, airplane and RV interior finishing;<br />
and a vinyl ester boat hull repair system. The<br />
company was established in 1983.<br />
Products & Product Numbers<br />
Duratec Polyester Sealer (823 Clear)<br />
Duratec Polyurethane Sealer (5604-001 Clear)<br />
Duratec Polyester Base Primer (707-051 Tan)<br />
Duratec Polyester Surfacing Primer (702-003 Black,<br />
707-002 Gray, 714-002 White)<br />
Duratec Polyester E-Z Sanding Primer (702-060, Black,<br />
707-060 Gray, 714-060 White)<br />
Duratec Polyester Hi-Gloss Coating (602-021 Black,<br />
608-021 Orange, 614-021 White, 904-040 Clear)<br />
Duratec Polyester Hi-Gloss Topcoat (904-045)<br />
Duratec Vinyl Ester Fairing Putty (1810-013 Untinted)<br />
Duratec Vinyl Ester Fairing Primer (1799-051 Blue)<br />
Duratec Vinyl Ester Primer (1794-005 White,<br />
1799-005 Gray)<br />
Duratec Vinyl Ester Hi-Gloss Topcoat (1902-045 Black,<br />
1904-045 Clear, 1908-045 Orange)<br />
Duratec Thinner (39LAC-1)<br />
World-Class Surfacing Technology<br />
from <strong>Hawkeye</strong> <strong>Industries</strong> Inc.<br />
<strong>Duratec®</strong><br />
for Boat Builders<br />
Tooling, Manufacturing and<br />
Interior Finishing<br />
World-Class Surfacing Technology<br />
from <strong>Hawkeye</strong> <strong>Industries</strong> Inc<br />
3050 Brookview Drive, Marietta, GA 30068<br />
Visit our website at www.duratec1.com<br />
Toll free: 800-977-0060<br />
Tel: 909-546-1160; Fax: 909-546-1161<br />
productinfo@duratec1.com<br />
Duratec is a registered trademark of Dura Technologies, Inc.<br />
Marketed Through Independent Distributors Worldwide<br />
Tel: 909-546-1160
Duratec for Boat Builders<br />
Marine<br />
Tooling<br />
Marine Manufacturing<br />
Marine Finishing<br />
A step-by-step system for surfacing marine<br />
(wood, MDF, foam and composite) plugs and<br />
patterns using air-cure polyester chemistry.<br />
Used in place of gel-coat based systems, the<br />
Duratec Polyester Plug & Pattern Surfacing System<br />
saves time and labor costs. It is comprised of<br />
these fine Duratec products:<br />
Duratec Polyester Sealer<br />
A low viscosity, rapid curing, penetrating sealer.<br />
Allows primers and topcoats to bond to a variety<br />
of substrates.<br />
Duratec Polyester Base Primer<br />
A low porosity, high-building, fairing and<br />
shaping primer.<br />
Duratec Polyester Surfacing Primer<br />
Provides rapid coat buildup and a smooth<br />
surface with high gloss, when required.<br />
Duratec Polyester E-Z Sanding Primer<br />
Represents the new generation of sanding<br />
and surfacing primers.<br />
Duratec Polyester Hi-Gloss Coating<br />
Applied after sanding when a high gloss finish<br />
is desired.<br />
Duratec Vinyl Ester Hi-Gloss Topcoat<br />
For use when the ultimate gloss finish<br />
is desired<br />
Build in protection with <strong>Duratec®</strong> Vinyl Ester<br />
Marine System<br />
For below-waterline, topside and deck surfaces.<br />
Duratec Vinyl Ester Putty, Fairing Primer and<br />
Primer provide outstanding resistance against<br />
osmosis and blister damage. Hollow glass microspheres<br />
impart low-density properties. The system<br />
is designed for one-off and production composites<br />
yachts, as well as for osmosis and blister repairs.<br />
Duratec Vinyl Ester Fairing Putty<br />
This fairing putty is lightweight and high building.<br />
The rapidly curing putty forms a tough durable<br />
surface, greatly reducing the time required to fair<br />
fiberglass products. With most applications, the<br />
putty is ready for sanding after 30-40 minutes.<br />
Duratec Vinyl Ester Fairing Primer<br />
A “sprayable putty” for fairing and priming<br />
composite marine surfaces<br />
Duratec Vinyl Ester Primer<br />
A proven performer on thousands of yachts.<br />
Duratec Thinner<br />
Duratec Thinner enhances the flow and leveling<br />
properties of Duratec primers and hi-gloss<br />
coatings. The end result is reduced porosity<br />
and orange peel.<br />
Duratec finishing system for fine marine<br />
wood interiors. You’ll save time and money<br />
while creating a high quality, durable surface<br />
finish.<br />
These three fine products make up Duratec’s<br />
interior coating system:<br />
Duratec Polyester Sealer<br />
Duratec Polyester Sealer is a deep penetrating<br />
sealer than anchors lacquers, urethanes, polyesters,<br />
vinyl esters and most epoxies to a variety<br />
of substrates. It applies easily with a brush,<br />
roller or cloth and cures rapidly. Surfaces are<br />
ready for topcoats in 1 to 2 hours.<br />
Duratec Polyurethane Sealer<br />
This recently developed product covers and seals<br />
oily woods and veneers. A two-component sealer—<br />
packaged for correct mixing—it adheres to difficult-to-bond-to<br />
woods, such as teak, mahogany,<br />
ebony, rosewood, etc. It is used to seal wood substrates<br />
in preparation for topcoating with clear<br />
and pigmented coatings.<br />
Duratec Polyester Hi-Gloss Topcoat<br />
You’ll achieve a superior glass-like finish with<br />
Duratec Polyester Hi-Gloss Topcoat. Easy to apply<br />
and quick building, the topcoat’s unique additives<br />
reduce the risk of fisheyes and pinholes during<br />
the spray application. It sands easily and polishes<br />
to a non-wax, tack-free high gloss finish.
Change language