Sinarback Adapter Kits

Sinarback Adapter Kits
551.43.032 Sinarback/Sinar Adapter Kit
Sinar Adapter Plate
- Can be used with any Sinar view camera.
109.05.637 Screw-driver - Only for the use in the Slave Mode.
164.31.054 4 Countersunk screws M3x12 - For the use in the Master Mode additionally the
FlashSync Interface Kit 551.43.054 is required.
- For the use with Sinarback 22.
551.53.030 Sinarback/Sinar Revolving Adapter Kit
Sinar Revolving Adapter Plate
- Can be used with any Sinar view camera.
109.05.637 Screw-driver - Only for the use in the Slave Mode.
164.31.052 4 Countersunk screws M3x8 - For the use in the Master Mode additionally the
FlashSync Interface Kit 551.43.054 is required.
- For the use with Sinarback 23.
551.43.034 Sinarback/Graflock Adapter Kit
551.43.234 Sinar Graflock Adapter Plate - Can be used with any 4x5" view camera with
109.05.637 Screw-driver international back and Graflock compatibility.
164.31.054 4 Countersunk screws M3x12 - Only for the use in the Master Mode.
551.43.054 FlashSync Interface Kit - For the use with Sinarback 22 and 23.
551.43.038 Sinarback/Hasselblad GEN Adapter Kit 1
551.43.240 Hasselblad Adapter Plate 1 - Can be used with any type of Hasselblad camera.
109.05.637 Screw-driver - Only for the use in the Master Mode.
164.31.054 4 Countersunk screws M3x12 - Only for the use with Sinarback 22.
551.33.635 Format Mask 22 Hasselblad
551.43.054 FlashSync Interface Kit
551.43.039 Sinarback/Hasselblad CW Adapter Kit 1
551.43.240 Hasselblad Adapter Plate 1 - Can only be used with Hasselblad 503 CW
109.05.637 Screw-driver cameras that are equipped with a winder.
164.31.054 4 Countersunk screws M3x12 - Only for the use in the Slave Mode.
551.33.635 Format Mask 22 Hasselblad - For the use in the Master Mode additionally the
551.43.063 Sinarback/Hasselblad CW Control Cable FlashSync Interface Kit 551.43.054 is required.
- Only for the use with Sinarback 22.
551.43.040 Sinarback/Hasselblad EL Adapter Kit 1
551.43.240 Hasselblad Adapter Plate 1 - Can only be used with Hasselblad cameras
109.05.637 Screw-driver of the EL series that are equipped with a winder.
164.31.054 4 Countersunk screws M3x12 - Only for the use in the Slave Mode.
551.33.635 Format Mask 22 Hasselblad - For the use in the Master Mode additionally the
551.43.064 Sinarback/Hasselblad EL Control Cable FlashSync Interface Kit 551.43.054 is required.
- Only for the use with Sinarback 22.
551.53.038 Sinarback/Hasselblad GEN Adapter Kit 2
551.53.240 Hasselblad Adapter Plate 2 - Can be used with any type of Hasselblad camera.
109.05.637 Screw-driver - Only for the use in the Master Mode.
164.31.054 4 Countersunk screws M3x12 - Only for the use with Sinarback 23.
551.53.526 Format Mask 23 Hasselblad
551.43.054 FlashSync Interface Kit
551.53.039 Sinarback/Hasselblad CW Adapter Kit 2
551.53.240 Hasselblad Adapter Plate 2 - Can only be used with Hasselblad 503 CW
109.05.637 Screw-driver cameras that are equipped with a winder.
164.31.054 4 Countersunk screws M3x12 - Only for the use in the Slave Mode.
551.53.526 Format Mask 23 Hasselblad - For the use in the Master Mode additionally the
551.43.063 Sinarback/Hasselblad CW Control Cable FlashSync Interface Kit 551.43.054 is required.
- Only for the use with Sinarback 23.
551.53.040 Sinarback/Hasselblad EL Adapter Kit 2
551.53.240 Hasselblad Adapter Plate 2 - Can only be used with Hasselblad cameras.
109.05.637 Screw-driver of the EL series that are equipped with a winder
164.31.054 4 Countersunk screws M3x12 - Only for the use in the Slave Mode.
551.53.526 Format Mask 23 Hasselblad - For the use in the Master Mode additionally the
551.43.064 Sinarback/Hasselblad EL Control Cable FlashSync Interface Kit 551.43.054 is required.
- Only for the use with Sinarback 23.
OverviewSinarbackAdapterKits-e.xls 22.12.00/Ca Page1/2

Sinarback Adapter Kits
551.43.041 Sinarback/Mamiya RZ 67 Adapter Kit
551.43.241 Mamiya RZ 67 Adapter Plate - To be used with Mamiya RZ 67 and RZ 67 II cameras
109.05.637 Screw-driver that are equipped with a winder.
164.31.054 4 Countersunk screws M3x12 - Only for the use in the Slave Mode.
551.43.534 Format Mask 22 Mamiya RZ/RB - For the use in the Master Mode additionally the
551.53.508 Format Mask 23 Mamiya RZ/RB FlashSync Interface Kit 551.43.054 is required.
551.43.061 Sinarback/Mamiya RZ/645 Control Cable 2 - For the use with Sinarback 22 and 23.
551.43.044 Sinarback/Mamiya RB 67 Adapter Kit
551.43.244 Mamiya RB Adapter Plate - To be used with Mamiya RB 67 cameras.
551.43.254 Mamiya RB Revolving Plate - Only for the use in the Master Mode.
109.05.637 Screw-driver - For the use with Sinarback 22 and 23.
164.31.054 4 Countersunk screws M3x12 - The supplied revolving plate cannot be used
551.43.534 Format Mask 22 Mamiya RZ/RB for photography with film.
551.53.508 Format Mask 23 Mamiya RZ/RB
551.43.054 FlashSync Interface Kit
551.43.046 Sinarback/Mamiya 645 Pro Adapter Kit
551.43.246 Mamiya 645 Adapter Plate - To be used with Mamiya 645 Super, 645 Pro, 645 Pro TL
109.05.637 Screw-driver cameras that are equipped with a winder.
164.31.054 4 Countersunk screws M3x12 - Only for the use in the Slave Mode.
551.43.565 Format Mask 22 Mamiya 645 - For the use in the Master Mode additionally the
551.53.504 Format Mask 23 Mamiya 645 FlashSync Interface Kit 551.43.054 is required.
551.43.305 CCD Protection Cover - For the use with Sinarback 22 and 23.
551.43.061 Sinarback/Mamiya RZ/645 Control Cable 2
551.43.042 Sinarback/Fuji GX 680 Adapter Kit
551.43.242 Fuji GX 680 Adapter Plate - To be used with Fuji GX 680 I, II, III cameras
109.05.637 Screw-driver that are equipped with a winder.
164.31.055 4 Countersunk screws M3x14 - Only for the use in the Slave Mode.
551.43.539 Format Mask 22 Fuji - For the use in the Master Mode additionally the
551.53.507 Format Mask 23 Fuji FlashSync Interface Kit 551.43.054 is required.
551.43.062 Sinarback/Fuji GX 680 Control Cable 2 - For the use with Sinarback 22 and 23.
551.43.043 Sinarback/Rollei Adapter Kit
551.43.237 Rollei Adapter Plate 2 - To be used with Rolleiflex 6001, 6003, 6008, 6008 Integral
109.05.637 Screw-driver cameras that are equipped with a winder.
164.31.055 4 Countersunk screws M3x14 - Only for the use in the Slave Mode.
551.43.554 Format Mask 22 Rollei - For the use in the Master Mode additionally the
551.53.505 Format Mask 23 Rollei FlashSync Interface Kit 551.43.054 is required.
551.43.067 Sinarback/Rollei 6008 Control Cable - For the use with Sinarback 22 and 23.
551.43.047 Sinarback/Contax 645 Adapter Kit
551.43.247 Contax 645 Adapter Plate - To be used with Contax 645 cameras
109.05.637 Screw-driver that are equipped with a winder.
164.31.054 4 Countersunk screws M3x12 - Only for the use in the Slave Mode.
551.43.574 Format Mask 22 Contax - For the use in the Master Mode additionally the
551.53.506 Format Mask 23 Contax FlashSync Interface Kit 551.43.054 is required.
551.43.305 CCD Protection Cover - For the use with Sinarback 22 and 23.
551.43.072 Sinarback/Contax 645 Control Cable
551.43.048 Sinarback/Zenza Bronica SQ-A Adapter Kit
551.43.248 Bronica SQ-A Adapter Plate - To be used with Zenza Bronica SQ-A and SQ-Ai
109.05.637 Screw-driver cameras that are equipped with a winder.
164.31.055 4 Countersunk screws M3x14 - Only for the use in the Slave Mode.
551.43.546 Format Mask 22 Bronica SQ - For the use in the Master Mode additionally the
551.53.503 Format Mask 23 Bronica SQ FlashSync Interface Kit 551.43.054 is required.
551.43.073 Sinarback/Bronica SQ-A Control Cable - For the use with Sinarback 22 and 23.
551.43.049 Sinarback/Zenza Bronica ETR-Si Adapter Kit
551.43.249 Bronica ETR Adapter Plate - Can be used with Zenza Bronica ETR-Si cameras.
109.05.637 Screw-driver - Only for the use in the Master Mode.
164.31.055 4 Countersunk screws M3x14 - For the use with Sinarback 22 and 23.
551.43.572 Format Mask 22 Bronica ETR
551.53.529 Format Mask 23 Bronica ETR
551.43.305 CCD Protection Cover
551.43.054 FlashSync Interface Kit
OverviewSinarbackAdapterKits-e.xls 22.12.00/Ca Page2/2