To download a PDF copy of the Technical Programme click here

PM-13
INTERNATIONAL CONFERENCE
And
EXHIBITION
On
POWDER METALLURGY
FOR AUTOMOTIIVE AND ENGIINEERIING IINDUSTRIIES--
PRECIISIION AND ADDIITIIVE MANUFACTURIING
And
39 thh t ANNUAL TECHNIICAL MEETIING off PMAII
Venue:
Hyatt Regency Pune, Weikfield IT Park, Pune Nagar Road, Pune 411 014, India
Thursday, 7 th – Saturday, 9 th February, 2013
Organized by
Powder Mettallllurgy Assssociiattiion off IIndiia ((PMAII))
1002, B Wing, Kingston CHS,High Street, Near D- Mart, Hiranandani Complex, Powai, Mumbai-400076, India
www.pmai.in
Conference Language: English

TECHNIICAL PROGRAM
Time THURSDAY, 7th FEBRUARY 2013
8:30 REGISTRATION
9.30 INAUGURAL FUNCTION
11.00
11.00 INAUGURATION OF EXHIBITION AND POSTER SESSION
11.05 Tea
PLENARY SESSION 1
11.30
Innovative Applications of Metal Powders
H. Söderhjelm -Höganäs., Sweden
Material Options for Efficient Processing of Powder Metallurgy Parts
11.50
Brian W James *, Kalathur S Narasimhan*, NarsiChandrachud**
*Hoeganaes Corporation, USA **GKN Sinter Metals, Pune,
New Cu-Ni-Mo-Mn Low Alloyed Steel for PM Structural Parts
12.10
Ilaria Rampin 1 , Matteo Zanon 1 , Stefano Saccarola 1 , Riccardo Durello 2 ,
1
Pometon Powder S.p.A., Italy 2 University of Padova, Italy
Gas Atomised Metal Powders in Near Net Shape Manufacturing and Coating Technology
12.30
Andrew Coleman and Martin Kearns
Sandvik Osprey Ltd., Red Jacket Works, Milland Road, Neath, SA11 1NJ United Kingdom
12.50
Machinable Fe-Cu-C Mix
S. Ashok, M. Nipanikar, U Engström, O. Andersson- Höganäs..
13:10 Lunch
PLENARY SESSION 2
14.00
14.20
14.40
Overview of Japan technology status”
Y. Takeda- Höganäs.Japan
Overview of China and Korea technology status
P. Skoglund, P. Zhang , F. Song- Höganäs, China
PM Industry in India- knowledge Outsourcing
Rama Mohan. R. Tallapragada

Consultant, India
Understanding of cracks formation during induction hardening of PM parts
15.00
Philippe François
Rio Tinto Metal Powders, 1655 Marie-Victorin, Sorel-Tracy, Quebec, Canada
Guidelines for determination of flow rate by means of a calibrated funnel for metallic powders” –
15:20
S. Panda , D. Gustavsson,
Höganäs ( Draft International standard ,ISO / DIS 13517).
15.40
Tea
PLENARY SESSION 3
16.00
Improving the Hardness of un-alloyed iron PM parts by a new low temperature gas alloying process without rapid
cooling.
N. GopinathFluidtherm Technology Chennai, India
Factors Affecting Properties of Sinterhardened Materials
16.20
François Chagnon
Rio Tinto Metal Powders, 1655 Marie-Victorin, Sorel-Tracy, Quebec, Canada
Effect of Particle Size and 2P2C Technology on the Soft Magnetic Properties of Composite Iron Compacts
16.40
K. S. Narasimhan 1 , M. L. Marucci 1 , F. Hanejko 1
1
Hoeganaes Corporation, 1001 Taylors Lane, Cinnaminson, NJ 08077 – USA
17.10
Chromium Alloyed PM Steel for high performance Applications
O. Bergman, N. Nandivada, M. Nipanikar –Hoganas AB Sweden
Warm Compaction and Warm-Die Compaction of Ferrous PM Materials
17.30
W. Brian James and Kalathur S. Narasimhan
Hoeganaes Corporation, Cinnaminson, NJ, USA
Soft Magnetic Powder Metal Materials and Processing for Elevated Strength Requirements
17:50
Ian W. Donaldson, GKN Sinter Metals, Auburn Hills, MI, USA
Peter Sokolowski, Hoeganaes Corporation, Cinnaminson, NJ, USA
Klaus Dollmeier, GKN Sinter Metals, Radevormwald, Germany
19.00- Entertainment by Live Rock Band and Dinner on Terrace

FRIDAY, 8 th FEBRUARY 2013
PLENARY SESSION 4
9.30
PM Automotive Applications
T. Schmidtseifer, E. Schneider, Hoganas AB Sweden
New Material Insertion in Automobile Industry
9:50
GoutamMohapatra
Sr. Lead Engineer, John Deere Technology Center
10:10
Automotive transmission design using full potential of powder metal
A. Flodin, M. Nipanikar- Hoganas AB Sweden
Sintering Activity Of Different Carbon Sources And Their Effect On Sintered Properties Pm Parts.
Luigi Alzati, Raffaele Gilardi,
10:30
Timcal Ltd, 6743 Bodio, Switzerland.
E. Hryha, L. Nyborg,
Department Of Materials And Manufacturing Technology, Chalmers University Of Technology, Rännvägen 2a, Se - 412 96
Gothenburg, Sweden
10:50 Tea
Multilevel Closed Loop Servo Hydraulic Presses
PLENARY SESSION 5
11.30
Pierson Jean-Marie
DORST Technologies, Mittenwalderstr. 61, D-82431 Kochel am
11:50
Helical Gear tooling.
Gutowski, Alvier
Multifaceted Applications of Particulate Materials in Energy and Environment
12:10.
Ajay S. Karakoti and Satyanarayana Kuchibhatla
Battelle Science and Technology India Pvt. Ltd, Hinjewadi, Pune
Structural modification of carbon nanotubes duringball milling
12:30
H.R.Nam 1 , Y.J. Kim 2 , S.S. Yangand J.H.Ahn 1*
1 Department of Materials Science and Engineering, Andong National University,South Korea
2 Korea Institute of Materials Science, Division of Functional Materials, South Korea
12.50 Boiler Free Steam Treatment

N. Gopinath Fluidtherm Technology Chennai, India
13:10 Lunch
S. L. N. Acharyulu Memorial lecture
PLENARY SESSION 6
14.00
14.20
14.40
Powder Consolidation, J . Viplava Kumar Dean Research and Prof Metallurgical and Materials Engineering MGIT
Hyderabad
P. R. Roy Memorial lecture
Srikumar Banerjee, Former Secretary, DAE Govt. of India
R. V. Tamhankar Memorial lecture,
P. Thareja, Punjab Engineering College,Chandigarh
Engineering Surfaces Using Powders, Suspensions and Solution Precursors"
15.00
Shrikant. V. Joshi, International Advanced Centre for Research in Powder Metallurgy and New Materials
(ARCI), Hyderabad
Quick Adaptor Change For Large Hydraulic Presses
15.20
Pierson Jean-Marie
DORST Technologies, Mittenwalderstr. 61, D-82431 Kochel am
WL- 1 Fabrication of ZrB 2 based composites and evaluation of thermal properties
Deep Prakash, T. Sakthivel a , M. Syambabu, T. Mahata, R.V. Kulkarni b and P.K. Sinha
15:40
Energy Conversion Materials Section, Bhabha Atomic Research Centre, Vashi Complex, Navi Mumbai – 400705 India
a
Indira Gandhi Centre for Atomic Research, Kalpakkam –603102 India
b
Post Irradiation Examination Division, Bhabha Atomic Research Centre, Trombay, Mumbai – 400085 India
16.00 Tea
16.30-
18.30
SPECIAL SESSION PRECISION & ADDITIVE MANUFACTURING
Rapid Manufacturing: A Overview- K.P. Karunakaran, IIT Bombay
Digital Metals H. Söderhjelm– Höganäs.,Sweden and Deepak Grover Hoganas India

"Case Studies of Additive Manufacturing in Indian Industries- Mukesh Agarwala, 3DPD, Bangalore
Rapid Manufacturing of Metallic Objects Using DMLS- Prakasam Anand, EoS India, Chennai
Powder Forged Connecting Rods – An Attractive Solution to The Automotive Industry- Edmond Ilia, Metaldyne Sintered
Components.
18.30 PMAI Governing Council Meeting
19.00 PMAI General Body Meeting
19.30- Dinner
9.30-
13.00
SATURDAY, 9 th FEBRUARY 2013
Parallel Technical Sessions
Metallics Ceramics and Composites PM Industry
9.30
Solid State Alloying of Aluminium
Alloys: A Mechanical Alloying
approach
B.Ravindar 1 and K.Gururaj 2
1
Vivekananda Institute of
Technology and Science
Karimnagar, A.P, 2 Kakatiya Institute
of Technology & Science,
Warangal, A.P, India.
Fabrication and Characterization of
Mg Nano Composites Reinforced
with MWCNTs Using Powder
Metallurgy
J.Jayakumar 1,3* B.K.Raghunath 2 T.H.R
ao 1
1.Department of Mechanical
Engg.,PDVVP College of Engg.
Ahmednagar, MH
2.Department of Manufacturing
Engg.,AnnamalaiUniversity,Chidamb
aram,TN
9.30
PM Technology - “A Cost
Effective Solution With
Advantage Of Lower Weight”
Mahesh
Kamble 1 NiranjanNarkhade 2 B.S.
Thanekar
Speciality Sintered Products Pvt
Ltd Pune
9.45
Effect Of Microwave Sintering On
Microstructural and Mechanical
Characteristics Of Al-Cu Alloys
Ashish Philip, Sonika Rajput,
PriyanshiAgrawal, ParulAgrawal,
C.Sasikumar ©
MsmeDept, Manit, Bhopal
Synthesis And Characterization Of
Ti-TiB-TiC Composites
K. Srinivasa Vadayar 1 , S. Devaki
Rani 2 , V.V. Bhanu Prasad 3 , G.
Poshal 4
1,2Dept. of Met. Engineering, JNTUH
3 DMRL, Hyderabad-
9.50
Corrosion Aspects In Friction
Materials',
MalobikaKaranjai, A.
Jyothirmayee, D. Sen and A.
Siva Kumar, ARCI, Hyderabad

4 IARE, Dundigal, Hyderabad
10.00
Development Of Cu-Cr Electrical
Contact Materials By Powder
Forging
Sandeep S, V.V. Dabhade, J.
Nemade, and U.Prakash, IITR
Microstructure And Mechanical
Properties Of 95% Tungsten Heavy
Alloy
Nanofluids:Tribological properties of
lubricating surfactants-based
nanofluids using Powder Metallurgy
route
ShalakaKomal*, PragyanPandey, S.
Srivastava
Material Science and Metallurgical
Engineering
Maulana Azad National Institute of
Technology
Comparison of Conventional &
Microwaves sintering of Iron Oxide
(Fe2O3) & Bentonite mixture at
very high pressure (GPa)
10.10
Role of Dispersants on
Thermoelectric Properties of β-
FeSi 2
Deep Prakash * , Chhatrasal
Gayner a , M. Syambabu, R.
Tewari b and P.K. Sinha
Energy Conversion Materials
Section
Bhabha Atomic Research
Centre, Vashi Complex,
Navi Mumbai – 400703
10.15
AshutoshPanchal, U. Ravi Kiran, M.
Sankaranarayana, T.K. Nandy
Defence Metallurgical Research
Laboratory, Kanchanbagh,
Hyderabad-500 058
Lakhan Kumar*,TarangBansal,
UditJain,Amanshrimal, S.Srivastava
* Department of Material Science
and Metallurgical Engineering,
MANIT, Bhopal
a Indian Institute of Technology,
Kanpur – 208016
b
Materials Science Division,
BARC, Trombay, Mumbai -
400085
P/M processing of Aluminum 7075
alloy with Nano yttria dispersion
Synthesis of Al 2 O 3 -ZrO 2 composite
powders by mechanical alloying
Manufacturing Powders by High
Energy Milling
10.30
Tilak C. Joshi*, U. Prakash, and
V.V. Dabhade, IITR
Preeti Makkar, R.C.Agarwala
Vijaya Agarwala
and
10.30
Murligopal Krishnamoorty
IITR
Novoken Innovations
10.45
Machinability studies of turning
Hardened steel using sintered insitu
TiB 2 based ceramic cutting tools
S.Madhavan 1 , S.Balasivanandha
Prabu 1 , K.A.Padmanabhan 2
1
Department of Mechanical
Engineering, College of Engineering
Guindy,
Synthesis of graphite nanoparticles
by mechanical milling using ANN
HimanshuPanjiar*, R. P. Gakkhar 1 ,
B.S.S. Daniel
Metallurgical and Materials
Engineering Department
10:50
Mumbai
Influence of graphite type on the
diffusion of copper in Fe – C –
Cu alloy systems.
Krishna Praveen Jonnalagadda
Anna University, Chennai-600025,
India
2 School of Engineering
Sciences and Technology,
University of Hyderabad
1 Mechanical and Industrial
EngineeringDepartment
IIT Roorkee, Roorkee– 247667, India
Robert Frykholm
Höganäs AB, Höganäs
11.00 Tea

11.30
Investigations and characterizations
on Hot Isostatic Pressed compacts
Monika Mohan a *, R. Subramanian
a
, P. C. Angelo a , G. AppaRao b
a
Department of Metallurgical
Engineering, PSG College of
Technology, Coimbatore 64100,
India
Study of tribological properties of
CNT based Al-Fe composites
S. Srivastava*, Soumya Varma,
Shruti Thakre, Priyanshi Jain, Tanay
Srivastava
Maulana Azad National Institute of
Technology
11.30
Causes for and Containment of
Porosity Development
during Hot Isostatic Pressing
Y.V.S. Kumar
Professor, Dept. of Mechanical
& Automobile Engineering
b
Defence Metallurgical Research
Laboratory, Defense Research and
Development Organization,
Hyderabad
Bhopal- 462051
School of Engineering &
Technology, Sharda University,
Greater NOIDA, India
11.45
Development of ODS Austenitic
Steel by Powder Forging of
mechanically alloyed powders
Prasenjit Chanda*, R Sunil Kumar,
V.V. Dabhade, and U.Prakash
IITR
Study On Injection Moulded
Polypropylene / Copper Composites
M. Kori, M.G. Kulthe* And R.K. Goyal
Department Of Metallurgy And
Materials Science, College Of
Engineering Pune, Shivaji Nagar,
Pune – 411 005, India
11.50
Powder Metallurgy Processing
And Characterization Of A
Novel Ferrite For Automobile
Torque Sensor Application
12.00
Design and Fabrication of
Transformer Core using Soft
Magnetic Composites
S.Patil, S.Dhandhare, N.B.Dhokey
Microwave Sintering of Barium
Titanate Powders
Synthesized by Reactive Milling
Process
Dibakar Das
School Of Engineering Sciences
And Technology, University Of
Hyderabad, Hyderabad 500046
Department of Metallurgical
Engineering, Govt. College of
Engineering, Pune, India
BharatiR.Rehani, S. D. Jambekar
and P.B.Joshi
12.15
Solid State Synthesis of Li2Be2O3
powder” authored by AmitSinha, S.
R. Nair and P. K. Sinha
12.30
Effect of molybdenum addition on
mechanical properties of powder
forged Fe-Cu-C alloys
Milind M. Salve, Sanjay
Rathore, and V.V. Dabhade
IITR
BARC, Mumbai
Preparation and Characterization of
bimetallic co-doped with Nickel and
Zinc TiO 2 hollow nano-sphere for
Photocatalytic Degradation of
Methyl orange
VivekVishwakarma), AmanVerma
LokeshRanaShrikantChoudhary,
Sanjay Srivastav
Material science and Metallurgical
engineering department
12.10
Comparative study of Magnetic
properties of Soft Magnetic
Composites and Silicon steel
N. B. Dhokey 1 , S. Dhandare 1 , S.
Patil 1 , P.Dhoka 2
1
Department of Metallurgy and
Material Science, College of
Engineering, Pune, India
2
Industrial Metal Powder (I) Pvt.
Ltd., Koregaon Bhima, Pune,
India
Maulana Azad National Institute of
Technology, Bhopal, India

12.45
Grain growth kinetics of oxide
dispersion strengthened
Nanocrystalline austenitic steels
Amman Jakhar, Lavanya Raman
and B.S. Murty
Department of Metallurgical and
Materials Engineering, IIT Madras,
Chennai-600036
Email
address:
ammanjakhar5000734@gmail.com,
lavanya.metly@gmail.com,
murty@iitm.ac.in
Fabrication of Anode Supported Solid
Oxide Fuel Cell by Tapecasting
Approach
Ajinkya J. Gohad a , Ketan P.
Lanjewar a , Diwakar Kashyap b , R.K.
Lenka c , P.K.Patro c,* , P.K. Sinha c
(a)
B. Tech. Student, Metallurgical and
Materials Engineering Department,
VNIT- Nagpur.
(b)
M. Tech. Student, Centre for
Converging Technologies, University
of Rajasthan.
(c)
Energy Conversion Materials
Section, Bhabha Atomic Research
Centre, Navi Mumbai.
12.30
Microwave Sintering of
Tungsten and Tungsten Copper
Functionally Graded Material
CharuLata Dube 1 Yashashri
Patil 1 , Shailesh Kanpara 1 , S.S.
Khirwadkar 1 , S.C. Kashyap 2
1
Divertor &Firstwall Technology
Development Division, Institute
for Plasma Research,
Gandhinagar, India 2 Department
of Physics, Indian Institute of
Technology Delhi, India
13.00 Lunch
Oxide Dispersion Strengthened
Powder Metallurgy Ferritic Alloy
Study of Diamond Wire Saw beads for
granite cutting operations
K. Jayasankar, A. Pandey, B. K.
Mishra, and Siddhartha Das*
P. Nimbalkar 1 , N. B. Dhokey 1 ,
V.Athavale 2 , P.Dhoka 2
14.00
CSIR-Institute of Minerals &
Materials
Technology,
Bhubaneswar.
* Indian Institute of Technology,
Kharagpur.
The Application of Equal Channel
Angular Pressing (ECAP) in
Powder Metallurgy and Recycling
of Automotive Metal Waste.
1 Department of Metallurgy and
Material Science, College of
Engineering, Pune, India
2
Industrial Metal Powder (I) Pvt. Ltd.
Koregaon Bhima, Pune, India
Synthesis and Mechanical
Characterization of Polymer Derived
Ceramic Matrix Composite for Armor
Application
14.00
Fabrication of Porous Bioactive
Medical Devices From Ti
Powder: Concept to Clinic
Deepak K. Pattanayak
CSIR-Central Electrochemical
Research Institute, Karaikudi,
630006
14.15
S.M.Badjate, A.S.Pakhare, Dr.
S.S.Hosmani
Sandeep Butee, Prathamesh Patil,
Niranjan Patil
Department of Metallurgy and
Material Science Engineering,
College of Engineering,Pune
Department of Metallurgy and
Materials Science, College of
Engineering, Pune-411005, India
14.30
Powder Forging Of Mechanical
Alloyed Ods Steels
R. Sunil kumar, V.V. Dabhade and
U. Prakash
Study and modelLing of compaction
phenomenon to optimise die design
U.K.Arora*, Sheela, N.Saibaba
Nuclear Fuel Complex
14.20
Swaging And Heat Treatment
Studies On 93% Tungsten
Heavy Alloys
U Ravi Kiran, A Panchal, M
Sankaranarayana, T K Nandy
IITR
Hyderabad
Defence
Metallurgical

14.45
Mossbauer investigation of
Fe 60 Ni 40 synthesized through
Powder Metallurgy methods
Arneet Rajput, ChaitanyaOstwal*,
AyushiGarg, Shabaz Khan,
S.Srivastava
Synthesis and Characterization of
Sodium-beta alumina Electroceramic
by Citrate Sol-Gel method for Sodium
Sulfur Battery Application.
Sandeep Butee, Kimaya Vyavhare,
Rasika Moharil.
Research Laboratory,
Kanchanbagh, Hyderabad-500
058
Maulana Azad National Institute of
Technology
Bhopal- 462051
Department of Metallurgy and
Materials Science, College of
Engineering, Pune-411005, India
15.00
Effect of Ti Particle Size on the
Reaction Kinetics and
Densification of TiAl Intermetallics
D.D.Mishra, V.V Dabhade, V.
Agarwala and R.C. Agarwala
Effect of Sintering Temperature on
Piezoelectric Properties of PZT
Multilayer
S. Premkumar*, S.D. Shinde, H.H.
Kumar
DRDO Centre for Piezoceramics and
Devices,
14.40
Practical experience of
machinable Fe-Cu-C mix
M. Kamble-Speciality Sintered,
M . Nipanikar- Höganäs.
IITR
Armament Research and
Development Establishment,
Pune – 411021
Powder Metallurgical Processing
of 6061 and 7075 series Aluminum
Alloys
Synthesis and Stabilisation of process
conditions for ‘β-FeSi2’
Arpit Bang, N.B.Dhokey
15:00
15.15
S. Jain, V. Agarwala, and K.
Chandra
IITR
Powder Metallurgical Fe-Cu-C
Alloys
Department of Metallurgy and Material
Science, College of Engineering,
Pune-05.
Email Id: arpitbang@gmail.com
Double doping effect on structural and
electrical properties of
PZT based ceramics
Improve the precision of
powder Metal Components by
Bonded mixes”: S. panda , M.
Nipanikar –Höganäs.
15.30
Sanjay Rathore, Milind M. Salve
and V.V. Dabhade
S.R.Sangawar*, B. Praveen Kumar
and H.H. Kumar
15.45
IITR
Synthesis, Characterization And
Study Of Corrosion Behaviour Of
Hf Based Bulk Metallic Glass
Shivani Gour1 ,
RaghvendraTewari 2, Geogy J
Abraham3, Atul Ballal4, G.K. Dey
5
1 Dept. Of Metallurgical And
Materials
Engineering
PZT Centre, Armament Research and
Development Establishment, Pune -
411021
Study on Constant Temperature
and Cooling Temperature Poling of
Lead Strontium Zirconate Titanate
N N Wathore*, C M Lonkar, S M
Kolhe, A K Singh and H H Kumar
DRDO Centre for Piezoceramics and
Devices
Armament Research and
Development Establishment, DRDO,
pashan, Pune-400 021
15.20
An Integrated Approach to
Warehouse Design by
Optimization of Material
Handling, Space and Labor
Requirements
Yogendra Singh 1 , Y.V. Satya
Kumar 2,*
Sharda University, , Greater

Visvesvaraya National Institute Of
Technology, Nagpur, 440010
NOIDA
2 Materials Science Division, Barc,
Trombay, Mumbai, Maharashtra,
400 085, India
3 Materials Science Division, Barc,
Trombay, Mumbai, Maharashtra,
400 085, India
4 Dept. Of Metallurgical And
Materials
Engineering
Visvesvaraya National Institute Of
Technology, Nagpur, 440010
5 Materials Science Division, Barc,
Trombay, Mumbai, Maharashtra,
400 085, India
15:50
Tool Wear analysis of
machinable Fe-Cu-C mix
V. Utkar, M. Nipanikar, S.
Ashok, N. Nandivada-
Höganäs. S. Joshi , H.
Sonawane , S. Shinde – IIT
Mumbai
16.00 Tea
Synthesis and sintering behaviour
of Cr 2 AlC fine powder
16.15
Production of copper powder and
its characterization
Bharat B. Panigrahi* and Y.
Rajkumar
16.15
M. Walunj, U. Chaudhari, N. B.
Dhokey
Department of Metallurgy and
Material Science, College of
Engineering, Pune - 411005
(India)
Email:
maheshwalunj13@yahoo.co.in
Department of Materials Science and
Engineering, Indian Institute of
Technology Hyderabad,
Ordnance Factory Estate,
Yeddumailaram, 502205, AP, India
*Email: bharat@iith.ac.in
Effect Of Graphite Type And
Graphite Particle Size On
Mechanical Properties Of P/M
Components
Review of fracture properties of
functionally graded materials
Krishna Praveen Jonnalagadda
Enhancing the Kinetics of
Reduction of Mill Scale: An Ecofriendly
Approach
C. Joshi, N. Dhokey
V. K. Pandey* 1 , B. P. Patel**, S.
Guruprasad* and N. Kumar*
Robert Frykholm
Höganäs AB, Höganäs.
16.30
Department of Metallurgy and
Materials Science,
College of Engineering, Pune,
India
Email
joshicr09.meta@coep.ac.in
ID:
*R&DE (E), Kalas, Alandi Road, P.O.
Dighi, Pune, (India)-411015
**Applied Mechanics Department,
Indian Institute of Technology Delhi,
Hauz Khas, New Delhi (India) –
110016
1
Corresponding Author : Email:-
vinu2pme@rediffmail.com

16.45
Improved compatibility of metal
powder for Solid State Recycling
of metallic waste
K. K. Rane 1* , P. P.
Date 11 Department of Mechanical
Engineering, India Institute of
Technology,
Bombay.
* Corresponding author. Tel: +91-
2225764553, E-mail:
kkrane@iitb.ac.in
Synthesis and characterisation of
nano-structured (Sm,Sr) doped ceria
solid electrolyte
D. Kashyap 1,* , P.K. Patro 2 , R.K.
Lenka 2 , T. Mahata 2 , A.K. Nagawat 1
and P.K. Sinha 2
1
Centre for Converging Technologies,
University of Rajasthan, Jaipur – 302
004
2
Energy Conversion Materials Section,
Bhabha Atomic Research Centre,
Vashi Complex, Navi Mumbai–
400703
16.35
17.00 CONCLUDING SESSION