UW 13.01 G AC voltage transducer - Schuhmann Messtechnik

AC voltage transducer
UW 13.01 G
FEATURES
Input:
AC voltage up to 500 V AC,
True RMS value recording
Output, simultaneous:
Current 0(4)…20 mA and
Voltage 0(2)…10 V
Galvanic 3-way isolation
of 4 kV
FUNCTION
The UW 13.01 G is being used to convert a AC voltage
signal into a standard signal.
It has an AC voltage input and an output for current
and voltage simultaneous.
Indication of operating state is displayed by LED on
front side.
Auxiliary power: 230 V AC/ 24 V UC/ wide range
99
1 2
Power supply
Input
~ U[V]
~ U[V]
10
uP
6
5
9 8
7
Output
+ I [mA]
GND
+ U [V]
GND
114,5
Status
22,5
07-7

1 2 3 4
5 6 7 8
UW 13.01 G
~
~
- I
+ I
- U
+ U
Auxiliary power
Output
simultaneous
Status LED
Input:
U: AC voltage: max. 500 V AC, 50 Hz
True RMS value recording
Customer specification of and input setting, e.g.
input:
or input:
or input:
0...20 V AC
0...100 V AC
0...400 V AC
connection: terminal 9, 10
Output:
Customer specification, factory setting: 0...20 mA
I: load-independent AC current: 0(4)...20 mA permissible load max. 500 Ω
U: load-independent AC voltage: 0(2)...10 V permissible load ≥ 5 kΩ
9 10 11 12
Input
~ U
~ U
Display:
LED Status: green, active input signal within range, ready for operation
13 14 15 16
Environmental conditions:
Storage temperature: -20...+70 °C
Operating temperature: 0...55 °C
Isolation voltage: 4 kV eff. 1 sec.
input/ output/ auxiliary voltage
Auxiliary power:
230 V AC: 200...250 V AC
approx. 9 mA
24 V UC: 20...30 V AC/ DC
approx. 50 mA
Wide range:
20...253 V AC/ DC
approx. 10...50 mA
Infl. of auxiliary power: < 0,1 %
Characteristics of transmission:
Transmission error: < 1 % of final value
Linearity error: ± 0,1 %
Resolution:
10 bit
Temperature error: < 100 ppm/ K
Load influence I: < 50 ppm
of final value
Load influence U: < 0,2%
at 1 kΩ load
Set time:
4 sec. factory set
(0,5...64 sec. possible)
Directive:
EMC Directive:
2004/108/EC*
Low Voltage Directive: 2006/95/EC
*minimum deviations possible during
HF-radiation influence
Mounting details:
Housing for top hat rail
Type of protection:
IP 40 housing
IP 20 clamps
Mounting rail fixed according to
EN 50022-35 x 6,2 mm
Width:
22,5 mm
Weight:
170 g
Material:
Polyamide PA
Flammability class: V0 (UL94)
Approval:
CE
Connection:
pluggable
screw clamps
0,2...2,5 mm2
For safety reasons we recommend to
mount the housing for top hat rail with a
distance of approx. 5 mm to each other.
Please check switch position before initial
operation!
Schuhmann GmbH & Co. KG
Kleingartacher Str. 21
D-74363 Güglingen
Tel. + 49 71 35 50 56
Fax + 49 71 35 53 55
www.schuhmann-messtechnik.de
Ordering information:
Please specify input- and output signal in
clear text, e.g.:
Input: 0…10 V AC, output: 4…20 mA
Type: UW 13.01 G 230 V AC
UW 13.01 GUC
24 V UC
UW 13.01 GW
wide range
08.02.2013
07-8