General Data Sheet (pdf)

Representative Specifications ~ ITS Model MT-7K/60:
ITS Model MT Series ~ Drawbar Trailer Specifications
MT Series ~ Mobile Mast System
• GVWR 7,000 Capacity; GAWR 3,500 lbs Capacity Each Axle
• Dual 3,500 lb. Dexter Axles; 7,000 lb EZ Flex Suspension
• Transport Length +18’0”; Transport Height +7’3”
• Trailer Length +17’0”; Trailer Width 7’0”; Deck Height +26”
• Platform Area – Approx. 15’L x 7’W; 62” Between the Fenders
• Solid Steel Construction – 6” Channel; Min. 50Ksi Yield Strength
• 1/8” Steel Diamond Plate Deck and Fenders; Welded Construction
• Weight without Customer or ITS-Installed Accessories +4,200 lbs
• Customer Equipment Payload Capacity to 2,500 lbs
• Four (4) HD Telescoping Outriggers; 5,000 lb. Static Load Jacks
• Electric Brakes (12V); ST235/80R16 LRE 10-ply Tires
• Full Sized Spare with 16” x 6k 8 hole Disc Wheel
• Min. 8,000 lb. Static Load, Adjustable Height Trailer Jack
• Emergency Break-away Devise; LED Lighting Package
• Arctic/Desert Wiring; Lift and Tie-Down Provisions
• 2-5/16” Ball Coupler or Pintle Eye; P-70 Chains & Hooks
• 7-Blade Truck Connector, Operating/Maintenance Manual
• Locking Steel Storage Box & Compressor Enclosure
• DOT Safety Decals; Reflectors; Multiple Trailer Levels
• Black Painted with Impact/Weather Resistant Coating
Pneumatic Mast Selection ~ Will-Burt Model 10-60HDL (Heavy-Duty Locking Series)
» Locking collars allow the mast to remain extended indefinitely without air pressure
» Rugged construction of high strength heat-treated aluminum tubes & collars with low friction synthetic bearings for long life
» Two full-length external keys on mast sections; collars have matching machined keyways that maintain directional azimuth
» The bumpers are designed to reduce shock on extension and retraction
» All exterior aluminum surfaces are anodized & sealed for long life; fasteners are plated steel for corrosion resistance
» Payload capacity of the specified model is 200 lbs
» ITS secures the pneumatic mast within a heavy-duty lattice steel exoskeleton (“truss”) that protects the mast during the tilt function and
offers added strength and stability to the extended mast structure
» The truss-enclosed mast is secured to a square tube steel support structure that provides maximum protection and minimal
deflection/vibration during primary and multi-terrain transport as well as during mast operation

154"
176"
MATERIAL
THIS DRAWING IS THE PROPERTY OF INTEGRATED TOWER SYSTEMS.
THE INFORMATION HEREIN SHALL NOT BE REPRODUCED OR TRANSFERRED
IN ANY MANNER OR USED OR DISCLOSED TO OTHERS FOR ANY PURPOSES,
EXCEPT AS SPECIFICALLY AUTHORIZED IN WRITING BY ITS.
ITS
WWW.ITSTOWERS.COM
918-749-8535
REMOVE BURRS & BREAK ALL
SHARP EDGES. UNLESS OTHERWISE SPECIFIED
DIMENSIONS IN INCHES.
TOLERANCES:
FABRICATION: 1/16
MACHINING:
FRACTIONS: 1/64
FINISH:
DECIMALS:
.005
DRAWN BY:
JFH
CHECKED BY:
CC
APPROVED BY:
CC
TITLE:
DRAWING #
DATE
04/15/2012
MT-7K/60
MT7K-60.2
mt_7K60 SHEET
1:32 1 OF 1

84"
17.90
125 7/8" 33" 58 1/4"
78 3/4"
MATERIAL
THIS DRAWING IS THE PROPERTY OF INTEGRATED TOWER SYSTEMS.
THE INFORMATION HEREIN SHALL NOT BE REPRODUCED OR TRANSFERRED
IN ANY MANNER OR USED OR DISCLOSED TO OTHERS FOR ANY PURPOSES,
EXCEPT AS SPECIFICALLY AUTHORIZED IN WRITING BY ITS.
221 1/4"
ITS
WWW.ITSTOWERS.COM
918-749-8535
REMOVE BURRS & BREAK ALL
SHARP EDGES. UNLESS OTHERWISE SPECIFIED
DIMENSIONS IN INCHES.
TOLERANCES:
FABRICATION: 1/16
MACHINING:
FRACTIONS: 1/64
FINISH:
DECIMALS:
.005
DRAWN BY:
JFH
CHECKED BY:
CC
APPROVED BY:
CC
TITLE:
DRAWING #
DATE
04/17/2012
MT-7K/60
MT-7K60.4
SCALE SHEET
1:32 1 OF 1

MATERIAL
THIS DRAWING IS THE PROPERTY OF INTEGRATED TOWER SYSTEMS.
THE INFORMATION HEREIN SHALL NOT BE REPRODUCED OR TRANSFERRED
IN ANY MANNER OR USED OR DISCLOSED TO OTHERS FOR ANY PURPOSES,
EXCEPT AS SPECIFICALLY AUTHORIZED IN WRITING BY ITS.
ITS
WWW.ITSTOWERS.COM
918-749-8535
REMOVE BURRS & BREAK ALL
SHARP EDGES. UNLESS OTHERWISE SPECIFIED
DIMENSIONS IN INCHES.
TOLERANCES:
FABRICATION: 1/16
MACHINING:
FRACTIONS: 1/64
FINISH:
DECIMALS:
.005
DRAWN BY:
JFH
CHECKED BY:
CC
APPROVED BY:
CC
TITLE:
MT-7K60
DRAWING #
MT-7K60.EXT
DATE
SCALE SHEET
04/18/2012 1:48 1 OF 1