XRAY M18 PRO Instruction Manual
XRAY M18 PRO Instruction Manual
XRAY M18 PRO Instruction Manual
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
TECH TIP 7.<br />
SPUR PINION FINAL<br />
GEAR GEAR RATIO<br />
THE MOTOR STAND IS ADJUSTABLE:<br />
1. RELEASE SCREWS FROM THE BOTTOM OF CHASSIS<br />
2. MOVE THE MOTOR STAND AS NEEDED<br />
3. TIGHTEN THE SCREWS<br />
<br />
<br />
<br />
INTERNAL RATIO 1 : 2.5<br />
SPUR GEAR<br />
42<br />
36<br />
o 13 8.08<br />
o 14 7.50<br />
o 15 7.00<br />
o 16 6.56<br />
x 17 6.18<br />
x 19 5.53<br />
x 21 5.00<br />
x 23 4.57<br />
x 17* 5.29<br />
x 19 4.74<br />
x 21 4.29<br />
x 23 3.91<br />
* ONLY FOR BRUSHLESS MOTOR<br />
x INCLUDED WITH KIT<br />
o AVAILABLE OPTION<br />
SPEED ACCELERATION<br />
PINION GEAR<br />
USE BATTERY PACK FROM <strong>XRAY</strong><br />
<strong>M18</strong> POWER PACK #389101<br />
ADJUST MOTOR STAND SO GEARS MESH SMOOTHLY<br />
36T SPUR GEAR<br />
WORKS WELL WITH 180-SIZE MOTORS.<br />
42T SPUR GEAR<br />
RECOMMENDED FOR 370 MOTOR, OR<br />
MODIFIED BRUSHED OR BRUSHLESS MOTORS.<br />
USE AP<strong>PRO</strong>PRIATE PINION(S).<br />
906258<br />
2.5x8<br />
27
Change language