StrapbinderÂ® - Acme Packaging

Strapbinder ® 

STAINLESS AND GALVANIZED 

BAND AND BUCKLES 

STEEL STRAP, SEALS 

TOOLS AND DISPENSERS 

TOOLS 

ECONO COILS, SEALS AND TOOLS 

CUTTERS 

PLASTIC STRAPPING, SEALS 

AND TOOLS 

JOBSITE STRAP AND SEALS 

SIGN MOUNTING PRODUCTS 

HOSEBINDER 

PREFORMED CLAMPS 

WIREBINDER TYING WIRE 

DISTRIBUTED BY: 

Corporate Office 

2451 S. Wolf Rd. • Des Plaines, IL 60018 

Phone: 1-800-800-5104 • Fax: 1-800-797-8727 

FORM 11/05 

Visit our website at www.gerrardco.com


Your Banding and Tool Professionals for Over 65 Years 

Products to Help Your Bottom Line

Strapbinder’s ® QUALITY COMMITMENT CONTINUES 

EXPERIENCE 

Acme Distributor Sales has been a leading 

manufacturer of the highest quality strapping 

products, application tools and equipment. 

This quality tradition is continued through the 

Strapbinder ® Products Division. 

PRODUCTS 

Strapbinder ® Products include the following 

lines: 

• Banding & Buckles • Regular Duty/High Tensile 

• Preformed Hose Clamps • Steel Strapping 

• Sign Hanging Products • Plastic Strapping Products 

• Application Tools • Pneumatic Tensioning Tools 

QUALITY PRODUCTS 

Acme Distributor Sales (Strapbinder ® Products) 

is totally committed to supplying the highest 

quality products and services that conform to the 

requirements established by our customers. 

To ensure that all products meet 100% of our 

customer requirements, Strapbinder ® Products 

is committed to a quality system which includes 

continuous improvement, meeting Customer 

expectations, and striving to exceed those 

expectations. 

Acme Strapbinder ® management affirms this 

commitment to quality and leads the effort to 

establish and maintain a Quality Policy that 

conforms to the Quality System of ISO 9001 

through the Management Review Team. This MRT 

is fully committed to the firm’s Quality Policy, the 

directives of our Quality Manual, and the 

Procedures and Work Instructions that support it. 

We will be actively involved in this effort and the 

execution of the responsibilities given to us in 

our Quality Manual. 

PROFESSIONAL SALES TEAM 

• Customer Service Excellence 

Strapbinder ® has a dedicated Inside 

Sales staff ready to service your 

day-to-day business. 

• Factory Technical Support 

A full staff of Professional Engineers 

is available to provide you with any 

of your technical requirements. 

• Knowledgeable Sales Representatives 

Our Outside Sales Professionals are in 

the field to assist you in sales, marketing 

or product support. 

DISTRIBUTION NETWORK 

We believe the Distributor is the most economical 

method of getting our high quality products to the 

people using them. 

Strapbinder ® Products 

“Your Banding Professionals for Over 65 Years” 

Chicago, 

IL 

Dallas, 

TX 

Distribution Centers

Strapbinder ® Band Catalog 

Effective Date: May 1, 2005 

FORM SBCAT MAY 2005 

INDEX 

PAGE 

BAND, BUCKLES AND TOOLS STRAPBINDER BAND, BUCKLES AND APPLICATION TOOL . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 

STAINLESS AND GALVANIZED BAND AND BUCKLES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 

STEEL STRAP, SEALS STEEL STRAPPING AND DISPENSERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 

TOOLS, AND DISPENSERS STEEL STRAPPING SEALS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 

STEEL STRAPPING TOOLS for REGULAR DUTY STRAP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 

STEEL STRAPPING TOOLS for HIGH TENSILE STRAP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 

CUTTERS STRAPPING CUTTERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 

ECONO COILS, SEALS, AND TOOLS STAINLESS ECONO COILS AND WING SEALS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 

SPECIALTY TOOLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 

JOBSITE STRAP, SEALS, AND JOBSITE STRAPPING AND STAINLESS RIBBON COILS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 

STAINLESS RIBBON COILS JOBSITE TOOL KITS, DISPENSERS, WING SEALS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 

PLASTIC STRAPPING, PLASTIC STRAPPING AND SEALS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 

SEALS, AND TOOLS PLASTIC STRAPPING TOOLS AND DISPENSERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 

PREFORMED CLAMPS J-SERIES STAINLESS PREFORMED CLAMPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 

J-SERIES GALVANIZED PREFORMED CLAMPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 

J-SERIES TOOLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 

CENTER PUNCH STAINLESS PREFORMED CLAMPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 

CENTER PUNCH GALVANIZED PREFORMED CLAMPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 

CENTER PUNCH TOOLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 

SIGN MOUNTING PRODUCTS SIGN MOUNTING BRACKETS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 

SIGN MOUNTING BOLTS, WASHERS AND MOUNTING PLATES . . . . . . . . . . . . . . . . . . . . . . . . . 5 

SPECIALTY PRODUCTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 

WIRE BLACK ANNEALED WIRE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 

★ Look through our catalog for our specialty items.

Strapbinder ® Band 

Strapbinder ® Band is available in Type 201 or 316 stainless steel and galvanized carbon steel 

with a full round edge. Where added strength is needed, use a double wrap, threading the band 

through the buckle twice. 

Old Width Thickness Weight Each 

Catalog No. Gerrard No. EDP No. In. mm In. mm (Lbs.) (Kg.) 

Type 201 STAINLESS STEEL • 100 FEET/ROLL – IN SELF DISPENSING CARTON 

ST202 BLJOX0220S — 1/4" 6.35 .020" .51 1.7 0.9 

ST203 BLJOX0325S 14203 3/8" 9.53 .025" .63 3.2 1.6 

ST204 BLJOX0430S 14204 1/2" 12.70 .030" .76 5.1 2.4 

ST205 BLJOX0530S 14205 5/8" 15.88 .030" .76 6.4 3.0 

ST206 BLJOX0630S 14206 3/4" 19.05 .030" .76 7.7 3.6 

TYPE 316 STAINLESS STEEL • 100 FEET/ROLL – IN SELF DISPENSING CARTON 

ST404 BLJRX0430S 14404 1/2" 12.70 .030" .76 5.1 2.4 

ST405 BLJRX0530S 14405 5/8" 15.88 .030" .76 6.4 3.0 

ST406 BLJRX0630S 14406 3/4" 19.05 .030" .76 7.7 3.6 

GALVANIZED CARBON STEEL • 100 FEET/ROLL – IN SELF DISPENSING CARTON 

ST304 BLJEX0430S 14304 1/2" 9.35 .030" .76 5.1 2.4 

ST305 BLJEX0530S 14305 5/8" 15.88 .030" .76 6.4 3.0 

ST306 BLJEX0630S 14306 3/4" 19.05 .030" .76 7.7 3.4 

Strapbinder ® Buckles 

Strapbinder ® stainless steel buckles can accommodate a single or double wrap of band. 

Buckles have extremely high joint strength. 

Old Width Weight Each 

Catalog No. Gerrard No. EDP No. In. mm Qty./Box (Lbs.) (Kg.) 

Type 201 STAINLESS STEEL BUCKLES 

ST252 SLCOX0241S — 1/4" 6.35 100 0.3 0.1 

ST253 SLCOX0341S 14253 3/8" 9.53 100 0.8 0.4 

ST254 SLCOX0441S 14254 1/2" 12.70 100 2.1 1.0 

ST255 SLCOX0541S 14255 5/8" 15.88 100 2.4 1.1 

ST256 SLCOX0641S 14256 3/4" 19.05 100 3.7 1.7 

TYPE 316 STAINLESS STEEL BUCKLES 

ST454 SLCRX0411S 14454 1/2" 12.70 100 2.1 1.0 

ST455 SLCRX0511S 14455 5/8" 15.88 100 2.4 1.1 

ST456 SLCRX0611S 14456 3/4" 19.05 100 3.7 1.7 

GALVANIZED CARBON STEEL BUCKLES 

ST354 SLCEX0411S 14354 1/2" 12.70 100 2.1 1.0 

ST355 SLCEX0511S 14355 5/8" 15.88 100 2.4 1.1 

ST356 SLCEX0611S 14356 3/4" 19.05 100 3.7 1.7 

Strapbinder ® Spin Tight Tool – ST-001 

The ST-001 tensioner features a spring loaded gripper lever for more efficient strap handling. 

The cut-off handle is vinyl coated for easier operation. A black chromium zinc plated finish 

provides superior corrosion resistance. Tensions up to 2400 lbs. Up to 3/4 x .030 Band (max). 

Old 

Weight Each 

Catalog No. Gerrard No. EDP No. Description (Lbs.) (Kg.) 

ST001 CGXA87499S 14001 Strapbinder Spin Tight Tool 4.5 2.0 

ST006 CXXC599208 14006 Tension Handle for Tool 1.1 0.5 

ST006A CXXC599182 14026 Screw for ST-001 Tool 0.5 0.2 

ST016 CXXC599190 14016 Ball Bearing for ST-001 Tool 0.1 .05 

1

Strapbinder ® Band and Buckle Kit 

A handy kit for a wide range of clamping applications. The ST-277 contains Strapbinder 

stainless band, buckles, wing seals and the Strapbinder tool. The perfect solution for emergency 

pipe repairs, hose clamping and general applications. 

Weight Each 

Catalog No. EDP No. Description (Lbs.) (Kg.) 

ST277 CGXA59407S 1 Roll 3/4" x .030" SS Strapbinder Band 20.0 9.0 

(00100) 1 Box 3/4" SS Buckles (100/ctn) 

1 Box 3/4" SS Screwbinder Buckles (25/ctn) 

1 Strapbinder Tool 

ST458 CXXC594084 Polyethylene Case Only 2.0 0.9 

Custom build a kit with any standard 

Strapbinder band/seal/tool combination. 

Heavy Duty Bigbinder TM 

System 

BIGBINDER TM BAND – TYPE 201 STAINLESS 

• 100 Feet/Roll – in Self Dispensing Carton 

Bigbinder band is available in Type 201 stainless for heavy duty clamping applications. When 

added strength is needed, use a double wrap, threading the band through the buckle twice. 

Width Thickness Weight Each 

Catalog No. EDP No. In. mm In. mm (Lbs.) (Kg.) 

ST430 BLJOX06446 3/4" 19.05 .044 1.12 11.6 5.4 

ST431 BLJOX08443 1.0" 25.4 .044 1.12 13.7 6.4 

ST432 BLJOX10445 1-1/4" 31.8 .044 1.12 17.2 8.0 

BIGBINDER TM BUCKLES – TYPE 201 STAINLESS STEEL BUCKLES 

Heavy duty buckles for use with Bigbinder band in demanding banding applications. Buckles can 

accommodate a single or double band wrap. 

Width 

Weight/Box 

Catalog No. EDP No. In. mm Qty./Box (Lbs.) (Kg.) 

ST440 SLCOX0640S 3/4" 19.5 25 1.8 0.8 

ST441 SLCOX0840S 1.0" 25.4 25 2.4 1.1 

ST442 SLCOX1000S 1-1/4" 31.8 25 3.2 1.4 

BIGBINDER TM TOOL – ST402B 

Fits any manufacturer’s band from 3/4" x .044" to 1-1/4" x .048". Parts are interchangeable with 

other similar tools. The Bigbinder Tool can pull up to 6,000 lbs. of tension. Built-in cutter cuts off 

band prior to buckle closing. 

Weight/Each 


ST402B CGXA871402 Bigbinder Tool 11.0 5.0 

* 

Screwbinder TM 

Buckles – Type 201 Stainless Steel 

Screwbinder TM Buckles are used in applications when a temporary clamp is desired or space 

limitations do not allow a tool roll-over. A set screw locks the band after tensioning. 

Width 

Weight/Box 


ST720 CPXC872110 1/4" 6.35 50 0.3 0.1 

ST722 CPXC872110 3/8" 9.53 50 0.5 0.2 

ST724 CPXC872121 1/2" 12.70 25 0.5 0.2 

ST726 CPXC872132 3/4" 19.05 25 0.9 0.4 

*The ST726 Screwbinder Buckle may be used with 5/8" band. 

2

Strapbinder ® “SC” Econo Coils – Type 301/304 Stainless Steel 

High corrosion resistant non-magnetic stainless steel strapping, in a self-dispensing carton. Used for securing signs, insulation work and other 

lightweight applications. Use the ST001, M1900, M1800 or M1920 to tension. Available in Ribbon and 100 Lb. Mill Coils, too! TYPE 301/304 

STAINLESS Available in 200' coils — in Self Dispensing Carton (Fits in the ST158 kit) 

Width Thickness Weight 

Catalog No. Gerrard No. EDP No. In. mm In. mm Feet/Coil (Lbs.) (Kg.) 

ST128/904 STSC304SS BLLPX04155 1/2" 12.70 .015" .38 200 5.5 2.5 


ST184 STSC306SS BLLPX04254 1/2" 12.70 .025" .63 200 8.5 3.6 


ST129.5/915 STSC308SS BLLPX05202 5/8" 15.88 .020" .51 200 8.5 3.6 

ST129.8 STSC309SS BLLPX05251 5/8" 15.88 .025" .63 200 10.6 4.8 


ST165 STSC312SS BLLPX06259 3/4" 19.05 .025" .63 200 12.7 5.8 

See page 11 for Ribbon Coils 

Strapbinder ® Wing Seals — Type 301/304 Stainless Steel 

Use the ST-001, ST101 or ST1902-D tool to tension. Wing seals are easy to close in any position. 

Use with Strapbinder ® “SC” Econo coils. Inquire about the availability of wing seals in other alloys. 

Width 

Weight/Box 


ST154 202SSXX100 1/2" 12.70 100 1.1 0.5 

ST155 203SSXX100 5/8" 15.88 100 1.8 0.8 

ST156 ST156VALUE 3/4" 19.05 100 2.1 0.9 

ST202SS SLJPX04134 1/2" 12.70 1000 10 5.0 

ST203SS SLJPX05131 5/8" 15.88 1000 18 5.0 

ST204SSHD SLJPX06436 3/4" 19.05 1000 21 9.5 

★ Specialty Seals 

Stainless Steel Pusher Seals. (Crimp style). Use with single upcut (one notch) sealers 

shown on page 15. 

Width 

Weight/Box 


ST1531SS SSHPX03132 3/8" 1000 10.0 

ST1532SS SSHPX04130 1/2" 1000 12.0 

ST1533SS SSHPX05137 5/8" 1000 13.5 

ST1534SS SSHPX06135 3/4" 1000 15.0 

Strapbinder Products Introduces Our New Economy Tools 

RS-300 

ECONOMY WINDLASS TENSIONER FOR USE WITH STAINLESS STEEL, OR 

STEELBINDER STRAPPING. FOR USE WITH 3/8-3/4” WIDE STRAPPING TO .030 

THICKNESS. PORTABLE RATCHET STYLE FOR FAST ACTION. 

VC-400 

ECONOMY INSULATION TOOL FOR LIGHT DUTY APPLICATIONS WITH 3/8-3/4 X.023 

MAX THICKNESS STRAPPING. RE-SETTABLE RACK FOR ADDITIONAL TAKE UP. 

GREAT FOR INSULATION AND PIPE COVERING. 

RS-300 

VC-400 

3

Specialty Tools 

STEELBINDER ® TOOLS – ST101 

Heavy duty windlass type tensioner for use with stainless steel or black Steelbinder ® strapping. 

It features a cutter and hammer knob for wing seal closing. For use with 3/8" - 3/4" wide 

strapping in thicknesses up to .030". Highly portable, fast, reliable ratchet type tool. For sign 

hanging, insulation work, general applications, and packaging use. 

Catalog No. EDP No. Description Weight (Lbs.) Each 

ST101 M1900 Steelbinder ® Tensioner 3.0 

(M1900) 


Short Handled version of the Model ST101 for use in close quarters which don’t permit adequate 

handle movement. Ideal for shipyard use. 


ST111 M1920 Short Handle 3.0 

(M1920) 

Steelbinder ® Tensioner 

INSULATION TENSIONER – ST1902-D 

Fast, reliable, easy to use tensioner for light duty application with 3/8 - 3/4 x .023 max 

strapping. Re-settable rack for additional take-up. One hand pistol grip operation is great for 

insulation and pipe covering use. 


ST1902-D M1800 Pistol Grip Tensioner 2.5 

(M1800) 

Sign Brackets 

Stainless steel and galvanized sign brackets are available for sign mounting, using Strapbinder ® 

band or “SC” Econo-Coils of stainless. The brackets are threaded and available with or without 

bolts/washers. 

STRAIGHT LEG BRACKETS (ONE HOLE) 

Qty./ 

Wt./ 

Catalog No. EDP No. Description Box (Lbs.) Box 

ST000 AABS214PAC Stainless Steel with 50 7.3 

SS Bolt, and Plastic Washer 

ST004 AABS211406 Stainless Steel – No 50 5.9 

Bolt or Washer 

ST011 AABG214PAC Zinc Plated Carbon Steel 50 7.6 

with Carbon Bolt and 

Plastic Washer 

ST014 AABG211405 Zinc Plated Carbon 50 6.2 

Steel – No Bolt or Washer 

FLARED LEG BRACKETS (ONE HOLE) 

Qty./ 

Wt./ 


ST021 AABS204PAC Stainless Steel with SS Bolt 50 7.6 

and Plastic Washer 

ST022 AABS210406 Stainless Steel – No Bolt 50 6.0 

or Washer 

ST031 AABG204PAC Zinc Plated Carbon Steel 50 7.4 

with Carbon Bolt, and 

Plastic Washer 

ST032 AABG210405 Zinc Plated Carbon Steel – 50 6.0 

No Bolt or Washer 

4

Bolts and Washers 

Washer head bolts, which protect the sign from damage, are used with sign brackets for 

mounting signs. 

STAINLESS STEEL BOLTS 

Qty./ Wt./ 

Catalog No. EDP No. Size Length Thread Box (Lbs.) Box 

ST-002-50 AACS216455 5/16" 3/4" 18 NC 50 1.5 

GALVANIZED STEEL BOLTS 

Qty./ Wt./ 

Catalog No. EDP No. Size Length Thread Box (Lbs.) Box 

ST012-3/4-50 AACG216455 3/4" 5/16" 18 NC 50 1.5 

PLASTIC FIBER WASHERS 

Used with the bolts and brackets to protect sign finish 

Qty./ Wt./ 

Catalog No. EDP No. I.D. O.D. Thickness Box (Lbs.) Box 

ST003-50 AAWL213455 3/8" 7/8" 1/16" 50 .8 oz. 

Mounting Plates 

Strapping holds this extruded aluminum mounting plate to utility poles. Includes plated 5/8-11 x 2" 

bolt and nut. 

Qty./ Wt./ 


ST510 ST510PLATE Mounting Plate 25 15.0 

1-1/2" x 4-3/4" with 

2" Plated Bolt 

ST512 ST512PLATE Heavy Duty Mounting 25 21.3 

Plate 1-1/2" x 5-1/4" 

with 2" Plated Bolt 

(Secure with band and buckle, on page 1.) 

Polebinder TM Bolt/Clamp 

Extruded aluminum fittings with zinc plated bolt, nut and washer. To be used with Strapbinder ® 

Band for mounting pole hardware. 

Qty./ Wt./ 


ST500 ST500POLEB Polebinder TM bolt/ 25 25 

clamp for use with 

3/4" Strapbinder ® 

band. Includes 

plated nut, bolt 

3/8-16 x 6" and washer. 

ST504 ST504POLEB Polebinder TM bolt/ 25 31.5 

clamp for use with 

1-1/4" Bigbinder TM 

band. Includes plated 

nut, bolt 5/8-11 x 8" 

and washer 

5

ALLPACK 

SEMI AUTOMATIC PLASTIC STRAPPING MACHINE 

Economical, Open Cabinet, Bottom Seal Model 

FEATURES AND BENEFITS 

• DURABLE 

The ALLPACK features a welded steel frame. Stainless steel top plate with package guide to 

assure straight straps. 

STANDARD FEATURES 

The ALLPACK machine uses a simplified 

strapping head. Feed, retract and tension are all 

cam operated. 

• RELIABLE 

PC Board controlled, 110 VAC motor, electric 

solenoids and sensor controlled heater blade. 

• SAFE 

Electrical safety interlocks on the hinged top plate. All power to machine is removed when 

top cover is opened. 

SPECIFICATIONS 

Power Supply: 120 Volts, Single Phase 

Strap Tension: From 10 to 99 Lbs. 

Strap Width: 

Strap Type: 

1/4", 3/8", or 1/2" Polypropylene on 8x8 or 9 x 8 cores. 

ITW Packaging Brands MJ and 

ULTRA series on 8" or 9" ID core sizes 

External tension control and setting indicator 

on outside of machine. 

Package Sizes: 

Minimum- 3 1/2 " W x 2" H 

Maximum- Unlimited 

Machine Dimensions: 34" L x 22" W x 30.25" H 

Machine Weight: 185 Lbs. 

★ Specialty Products 

440 CUT-TO-LENGTH STRAP DISPENSER CGXA585852 

Automatic Strap Cutting Machine 

The 440 eliminates strap waste and reduces labor costs. The operator simply loads the strap 

and programs the solid state control system to control the length of cut and quantity. The 440 

does the rest. The 440 is industry-proven on jobs requiring 50,000 cuts per day. Its solid state 

control and wear resistant working parts withstand rough use providing long service life. 

MODEL 440 GENERAL SPECIFICATIONS 

Dimensions: 21"W x 52"L x 48"H 

Shipping Wt.: 390 lb. 

Air: 

80 psi 

Electricity: Single phase 110v, 60Hz 

Dispensing Rate: 100 feet per minute 

Strapping: Accepts 3/8 x .015 inch to 2 x .050 inch strap; 

ribbon-wound or oscillated coils, 

16" I.D. x 28" O.D. (max) 

Strap Length: 1" to 100' 

Quantity: 1 to 999 pieces per setting 

If You Pre-Cut Your 

Strapping, This Machine 

Will Save Labor and Material 

Round End Cut Option Available 

Plastic Strapping Option Available 

6

HOSEBINDER TM 

Smooth-Seal J-Series Pre-Formed Clamps — Stainless Steel 

Hosebinder TM Smooth-Seal TM double wrapped, pre-formed clamps lock securely and require no 

hammering. The specially designed inside tab eliminates leak paths common with thin-wall hose. 

They easily lock under full tension by one lifting movement. Apply the clamps with the ST-001 

Strapbinder tool and the HBJ-001 Adapter. Inquire about the availability of Hosebinder clamps in 

other alloys. Package Quantity: As marked, price per carton. 

Clamp Band Band Weight 

__________ Catalog No. EDP ________ No. Inside _________ I.D. Width _____ Thickness ________ Qty./Box _______ (Lbs.) __________ Each 

HBJS-201 HBJS201SS 13/16" 3/8" .025" 100 3.6 

HBJS-242 SCXO242011 1" 1/4" .020" 100 2.1 

HBJS-243 HBJS243SS 1" 3/8" .025" 100 3.4 

HBJS-202 HBJS202SS 1-3/8" 3/8" .025" 100 4.7 

HBJS-203 HBJS203SS 1" 1/2" .030" 100 6.5 

HBJS-204 HBJS204SS 1-1/4" 1/2" .030" 100 7.2 

HBJS-241 SCXO241011 1-3/8" 1/4" .020" 100 2.5 

HBJS-205 HBJS205SS 1-1/2" 5/8" .030" 100 10.4 

HBJS-236 HBJS236SS 1-3/4" 1/2" .030" 100 8.7 

HBJS-206 HBJS206SS 1-3/4" 5/8" .030" 100 11.3 

HBJS-245 HBJS245SS 2" 3/8" .025" 100 5.5 

HBJS-253 SCXO253011 2" 1/4" .020" 100 3.2 

HBJS-207 HBJS207SS 2" 5/8" .030" 100 12.2 

HBJS-227 HBJS227SS 2" 3/4" .030" 100 14.9 

HBJS-208 HBJS208SS 2-1/4" 5/8" .030" 100 13.3 

HBJS-209 HBJS209SS 2-1/2" 5/8" .030" 100 13.9 

HBJS-230 HBJS230SS 2-3/4" 1/2" .030" 100 11.3 

HBJS-210 HBJS210SS 2-3/4" 3/4" .030" 50* 9.2 

HBJS-211 HBJS211SS 3" 3/4" .030" 50* 9.7 

HBJS-212 HBJS212SS 3-1/2" 3/4" .030" 50* 10.8 

HBJS-213 HBJS213SS 4" 3/4" .030" 25* 6.1 

HBJS-214 HBJS214SS 4-1/2" 3/4" .030" 25* 6.7 

HBJS-215 HBJS215SS 5" 3/4" .030" 25* 7.2 

HBJS-216 HBJS216SS 6" 3/4" .030" 25* 8.2 

HBJS-218 HBJS218SS 7" 3/4" .030" 25* 10.2 

HBJS-219 HBJS219SS 8" 3/4" .030" 25* 11.0 

* Acme will Invoice on a Per Carton Basis. 

7

HOSEBINDER TM Clamp Band Band Weight 

Smooth-Seal J-Series Pre-Formed Clamps – Galvanized Steel 

GALVANIZED CARBON STEEL JS-SERIES 

(These clamps are not for use with punch-type tools.) 

_________ Catalog No. EDP ________ No. Inside _________ I.D. Width _____ Thickness ________ Qty./Box _______ (Lbs.) __________ Each 

HBJS-301 HBJS301G 13/16" 3/8" .025" 100 3.6 

HBJS-343 HBJS343G 1" 3/8" .025" 100 3.9 

HBJS-302 HBJS302G 1-3/8" 3/8" .025" 100 4.7 

HBJS-303 HBJS303G 1" 1/2" .030" 100 6.5 

HBJS-304 HBJS304G 1-1/4" 1/2" .030" 100 7.2 

HBJS-305 HBJS305G 1-1/2" 5/8" .030" 100 10.4 

HBJS-336 HBJS336G 1-3/4" 1/2" .030" 100 8.7 

HBJS-306 HBJS306G 1-3/4" 5/8" .030" 100 11.3 

HBJS-345 HBJS345G 2" 3/8" .025" 100 5.5 

HBJS-307 HBJS307G 2" 5/8" .030" 100 12.2 

HBJS-308 HBJS308G 2-1/4" 5/8" .030" 100 13.3 

HBJS-309 HBJS309G 2-1/2" 5/8" .030" 100 13.9 

HBJS-310 HBJS310G 2-3/4" 3/4" .030" 50* 9.2 

HBJS-311 HBJS311G 3" 3/4" .030" 50* 9.7 

HBJS-312 HBJS312G 3-1/2" 3/4" .030" 50* 10.8 

HBJS-313 HBJS313G 4" 3/4" .030" 25* 6.1 

HBJS-314 HBJS314G 4-1/2" 3/4" .030" 25* 6.7 

HBJS-315 HBJS315G 5" 3/4" .030" 25* 8.2 

HBJS-318 HBJS318G 7" 3/4" .030" 25* 10.2 

HBJS-319 HBJS319G 8" 3/4" .030" 25* 11.0 

* Acme will Invoice on a Per Carton Basis 

“Lift and Lock” TM Hosebinder TM J-Series Tools 

HBJ-001 HOSEBINDER TM PRE-FORMED J-SERIES CLAMP TOOL ADAPTER 

Hosebinder pre-formed clamps are applied with the ST 001 Strapbinder tool and HBJ-001 

Adapter. High tension capability with simple “lift and lock” securement. 

Wt. 

Catalog No. EDP No. Description (Lbs.) 

HBJ-001 CXXA871714 Hosebinder TM Adapter Tool 1.5 

8

HOSEBINDER TM 

NEW SMOOTH 

SEAL STYLE 

Hosebinder Center Punch Preformed Hose Clamps (HBC Series) Stainless 

Hosebinder TM double wrapped, HBC series center punch clamps are available in 201 stainless 

steel or electro galvanized carbon steel. Under conditions of high corrosion, we recommend the 

stainless steel clamp. Center punch clamps are double wrapped and locked with the conical 

punch of the HBC300/301 Tensioning Tool. To order the proper size clamp, measure the outside 

diameter of the hose with the fitting inserted. Select the next larger inside diameter clamp by 

catalog number. Package Quantity: As marked, Price Per Carton. 

STAINLESS STEEL CENTER PUNCH (HBC SERIES) 

TYPE 201 

3/8" Wide Clamp – .025" Thick, 5/8" Wide Clamp – .025" Thick 

Clamp Carton Weight 

Catalog No. EDP No. I.D. x Width Quantity (Lbs.) Each 

HBC3S HBC3SCENPU 13/16" x 3/8" 100 3.6 

HBC4S HBC4S 1" x 5/8" 100 8.3 

HBC311S HBC311SCEN 1-3/8" x 3/8" 100 4.6 

HBC5S HBC5S 1-1/4" x 5/8" 100 8.7 

HBC6S HBC6S 1-1/2" x 5/8" 100 9.7 

HBC7S HBC7S 1-3/4" x 5/8" 100 10.6 

HBC8S HBC8S 2" x 5/8" 100 11.5 

HBC9S HBC9S 2-1/4" x 5/8" 100 12.6 

HBC10S HBC10S 2-1/2" x 5/8" 50* 6.8 

HBC11S HBC11S 2-3/4" x 5/8" 50* 7.3 

HBC12S HBC12S 3" x 5/8" 50* 7.7 

HBC14S HBC14S 3-1/2" x 5/8" 50* 8.7 

HBC16S HBC16S 4" x 5/8" 25* 4.9 

HBC18S HBC18S 4-1/2" x 5/8" 25* 5.5 

HBC20S HBC20S 5" x 5/8" 25* 5.9 

HBC24S HBC24S 6" x 5/8" 25* 6.8 

HBC28S HBC28S 7" x 5/8" 25* 7.4 

HBC32S HBC32S 8" x 5/8" 25* 8.2 

* Acme will Invoice on a Per Carton Basis. 

9

HOSEBINDER TM 

NEW SMOOTH 

SEAL STYLE 

Hosebinder Center Punch Preformed Hose Clamps (HBC Series) Galvanized 

GALVANIZED CARBON STEEL 

3/8" Wide Clamp – .025" Thick, 5/8" Wide Clamp – .025" Thick 

Clamp Carton Weight 

Catalog No. EDP No. I.D. x Width Quantity (Lbs.) Each 

HBC3 HBC3CENPUN 13/16" x 3/8" 100 3.6 

HBC4 HBC4 1" x 5/8" 100 8.3 

HBC311 HBC311CENP 1-3/8" x 3/8" 100 4.6 

HBC5 HBC5 1-1/4" x 5/8" 100 8.7 

HBC6 HBC6 1-1/2" x 5/8" 100 9.7 

HBC7 HBC7 1-3/4" x 5/8" 100 10.6 

HBC8 HBC8 2" x 5/8" 100 11.5 

HBC9 HBC9 2-1/4" x 5/8" 100 12.6 

HBC10 HBC10 2-1/2" x 5/8" 50* 6.8 

HBC11 HBC11 2-3/4" x 5/8" 50* 7.3 

HBC12 HBC12 3" x 5/8" 50* 7.7 

HBC14 HBC14 3-1/2" x 5/8" 50* 8.7 

HBC16 HBC16 4" x 5/8" 25* 4.9 

HBC18 HBC18 4-1/2" x 5/8" 25* 5.5 

HBC20 HBC20 5" x 5/8" 25* 5.9 

HBC24 HBC24 6" x 5/8" 25* 6.8 

HBC28 HBC28 7" x 5/8" 25* 7.4 

HBC32 HBC32 8" x 5/8" 25* 8.2 

* Acme will Invoice on a Per Carton Basis 

Hosebinder TM Center Punch Tensioning Tools 

– Locking Tool (HBC Series) 

These rugged, ratchet action tools are designed for fast, efficient application of center punch 

clamps. Choose the HBC-300 or HBC-301, depending on clamp size. The HBC-032 adapter insert 

is available to allow the HBC-300 to utilize 3/8" clamps. Use the Heavy Duty HBC-256 Mallet for 

speedy locking of the Center Punch clamps. 

Wt. 

Catalog No. EDP No. Description (Lbs.) Each 

HBC-300 CGXA874455 Center Punch Tool for 5/8" wide clamps 3.0 

HBC-301 CGXA874487 Center Punch Tool for 3/8" wide clamps 3.0 

HBC-032 HBC032ADPT 3/8" adapter insert for HBC-300 tool 0.5 

HBC-256 HBC256MALL Mallet for Punching Clamp 2.0 

HBC-038 CGXA721011 Light Duty Punch Tool for 3/8" 1.0 

and 5/8" wide clamps 

New 

Improved 

Design 

10

Jobsite Steelbinder ® Black/Galvanized Strapping 

RIBBON COILS 

For general packaging, bundling and palletizing. Black painted and waxed and galvanized 

Steelbinder ® strapping is made from tempered, shock resistant steel for a wide range of packaging 

applications ranging from general palletizing to unitizing small irregular shapes. A nail can be 

driven through Jobsite Steelbinder ® . A convenient, money saving strapping method. Use the 

Model M1900 tensioner. 

Ribbon Wound Coils of Steelbinder ® Black Strapping (6" I.D. and 17-1/2" O.D.) 

For use with the Model ST00101 Kit or ST400 Dispenser. (Can be shipped UPS) 

Break Feet/ Wt. (Lbs.) 

Catalog No. EDP No. Width Thickness Description Strength Roll Each 

ST305X BLFDX04201 1/2" .020" Black Painted 800 865 29.0 

ST306X BLFDX04250 1/2" .025" Black Painted 1000 690 29.0 

ST308 BLFDX05208 5/8" .020" Black Painted 1000 865 37.0 





Jobsite Steelbinder ® Black/Galvanized Strapping 

Convenient self dispensing cartons of steelbinder black strapping which fit in the ST458 case. 

200 feet/roll. Use the Model ST101 Tensioner. 



STSC-305 BLLDX04208 1/2" .020" Black Painted 800 200 6.8 



PUNCHED BLACK STRAPPING – 

9/64" Hole centered every 3/4". Boxed, 200'/Roll. 



D3420PUNCH D3420PUNCH 3/4" .020" Black Painted 1050 200 13.5 

Strapbinder ® Ribbon Coils – Type 301/304 Stainless Steel 

High corrosion resistant, ribbon wound, stainless steel coils. Use for sign hanging, 

insulation work and other light applications. Coils fit in ST400 dispenser. 

Feet/ Lbs./ 

Catalog No. EDP No. Width Thickness Description Coil Coil 

BLCPX04155 BLCPX04155 1/2" .015" Stainless Strap 2900 100 

305SSR900 305SSR900 1/2" .020" Stainless Strap 900 42 

305SSV3000 305SSV3000 1/2" .020" Stainless Strap 3000 100 

311SSR900 311SSR900 3/4" .020" Stainless Strap 900 42 

311SSV2000 311SSV2000 3/4" .020" Stainless Strap 2000 100 

BLCPX05202 BLCPX05202 5/8" .020" Stainless Strap 2300 100 

Inquire Within 

Please refer to page #3 for assorted sizes of Stainless Steel Wing Seals. 

Stainless is also available in 100 lb. mill coils. Please contact our Strapbinder ® Customer Service for prices 

Note: For high volume orders, please contact us directly for pricing. 

11

Jobsite Dispenser – ST400 

Heavy duty, yet light enough to carry. Handy, portable dispenser easily dispenses 3/8" to 3/4" 

ribbon coils of stainless or Steelbinder ® black strapping. Brackets hold tensioning and cutting 

tool, covered tray carries seals. Handle is provided for portability. 18" high, can be shipped UPS. 

Weight (Each) 


ST400 CGCA621011 Portable Strap Dispenser 15.0 6.8 

JOBSITE DISPENSER WITH TOOLS (COMBINATION UNIT) – ST00101 

Heavy duty, yet light enough to carry. A convenient strapping kit containing the ST400 

dispenser, ST101 tensioner and ST502 cutter. Order strap and seals separately to suit your specific 

needs. Light enough to carry but can be mounted on truckbeds or in tool sheds. 18" high, can 

be shipped UPS. Tools available separately. (Strap not included.) 

Weight (Each) 


ST00101 CGXA622689 Portable Strap Dispenser, 27.0 12.2 

ST101 Tensioner, ST502 Cutter 

Refer to page #4 for the ST-101 and ST-111 Tools and page #17 for the ST-502 Cutter. 

Jobsite Steelbinder ® Strapping Wing Seals 

For general packaging, bundling and palletizing. Use with Jobsite Steelbinder ® black strapping 

and the ST101 Tensioner. Fast and easy to close in any position with the ST101 Tensioner or 

ST502 cutter. 

Wt. (Lbs.) 

Catalog No. EDP No. Size Description Qty./Box Each 

ST202W SLJAX04155 1/2" Steel 2500 25.0 



ST202-100 202WSXX100 1/2" Steel 100 1.5 

ST203-100 203WSXX100 5/8" Steel 100 1.8 

ST204-100 204WSXX100 3/4" Steel 100 2.6 

Jobsite Steelbinder ® Kit – ST158 

Keep all your strapping items at hand with the sturdy polyethylene case containing the ST101 

Tensioner and ST502 cutter. Space provided for boxed 200' “SC” Econo Coils of stainless steel, 

Steelbinder ® black strapping, or order strap separately to suit specific requirements. Case 

available separately, Model ST458. Can be shipped UPS. (Strap not included.) 

Weight (Each) 


ST158 CGXA597907 Polyethylene Case containing 6.0 27 

the M1900 Tensioner and 502 Cutter. 

ST458 CXXC594084 Polyethylene Case 2.0 .09 

Insulation Tensioner – ST1902-D 

INSUL TENSIONER – ST1902-D 

Fast, reliable, easy to use tensioner for light duty applications and 3/8" – 3/4" x .023" max 

strapping. Re-settable rack for additional take-up. One hand pistol grip operation is great for 

insulation and pipe covering use. 

Weight (Each) 


ST1902-D M1800 Pistol Grip Tensioner 2.5 1.1 

(M1800) 

ATTN: 

PETRO-CHEMICAL 

SUPPLY HOUSES! 

12

Steel Strapping 100 Lb. Coils – No Freight Allowed 

Regular duty strapping is manufactured from cold rolled steel under rigid quality control. Precise uniformity in width, gauge and finish ensures 

trouble-free operation with automatic strapping machines and pneumatic or manual strapping tools. 

High tensile strapping is manufactured from special analysis cold rolled steel and is fully heat treated to provide high tensile strength and ductility. 

The cold rolled high tensile strapping ensures uniformity in gauge and finish for trouble-free operation in power tools. High tensile strength affords 

extra protection under all strapping conditions. 

Finishes: Painted and waxed strapping features a high quality coating to resist corrosion, and uniformly waxed to ensure ease of operation in 

strapping tools and machines. It meets requirements of Federal Specification QQ-S-781, Types 1 and IV, Class A coated finish. AAR Approved. 

• provides strong 

reinforcement 

• permits reduction of 

container board strength 

• permits carton re-use 

• discourages pilferage 

• is the strongest strapping 

material, size for size 

• offers widest range of 

width and thickness 

• provides highest tension * 

• has highly stable 

mechanical properties 

• withstands impact 

• resists abrasion 

* 

• is impervious to ultraviolet 

light rays 

Oscillated Wound Coil 

Ribbon Wound Coil 

*Most Popular Sizes 

* 

* 

Steel Strapping Dispensers 

Strapping Specifications 

Average Coil Weight (Lbs.) 

ID 16" 

Average Face 2.78" ID 16" 

Fracture Feet OD 22" OD Varies 

EDP Load per Oscillated Ribbon 

Strap Size (In.) No. (lbs.) (lb.) Wound Wound 

Regular Duty Catalog No. Wt. Lbs. # Skid Wt. Lbs. # Skid 

3/8 x .015 1001395 02301 675 52.3 100 12 -- -- 

3/8 x .020 1001435 02302 880 39.3 100 12 

1/2 x .015 1003625 02304 900 39.3 100 12 

1/2 x .020 1003655 02305 1,170 29.4 100 12 

1/2 x .023 1003905 23065 1,380 25.6 100 12 

5/8 x .015 1005210 02307 1,125 31.4 100 12 

5/8 x .020 1005980 02308 1,460 23.6 100 12 

5/8 x .023 1005182 23095 1,725 20.5 100 12 

3/4 x .015 1007500 02310 1,350 26.2 100 12 

3/4 x .020 1007980 02311 1,760 19.6 100 12 

3/4 x .023 1007005 23125 2,070 17.1 100 12 

High Tensile 

1/2 x .020 1003790 12020 1,485 28.7 100 12 

5/8 x .020 1005672 58020 1,855 22.9 100 12 

3/4 x .020 1007400 34020 2,325 19.6 100 12 

3/4 x .025 1007325 34025 2,620 15.7 100 12 

3/4 x .029 2012004 34031 3,250 12.6 100 12 60 36 

1-1/4 x .029 2014001 14031 5,490 7.5 120 20 

2/.044 2018040 02044 12,300 3.3 125 18 

SOLD IN FULL SKIDS ONLY 

ST418-C MOBILE,VERTICAL DISPENSERS – OSCILLATED COIL 

Developed for use with 100 lb. oscillated wound coils, the ST418-C features a handy tray for tool, 

seal, or other accessory storage. The strap feeds through a guide arm which activates a brake to 

prevent overrun. The dispenser may be used with either manual or pneumatic tools. UPS shippable. 

Weight (Each) 

Catalog No. EDP No. Strap Size (Lbs.) (Kg.) 

ST418-C 00418 3/8-3/4" oscillated 60 27.2 

(ACMEDS113) 

ST424 MOBILE,VERTICAL DISPENSER – RIBBON COIL 

Developed for use with 100 lb. ribbon wound coils of high tensile strapping and pneumatic or 

manual tools. The upper tray stores small tools or seals and a lower tray stores large tools. The 

strap feed guide arm activates a brake to prevent overrun. 

Weight (Each) 


ST424 00424 3/4-2" ribbon 65 29.4 

(ACMEDS127) 

ST420-B MOBILE, VERTICAL DISPENSER – MULTIPLE RIBBON COILS 

For ribbon wound high tensile strapping, the ST420-B has adjustable metal rods for storing and 

dispensing up to three coils of 3/4" to 2" ribbon wound strapping at once. It also features a tool 

tray for storage of tools, seals and accessories. 

Weight (Each) 


ST420-B 00420 3/4-2" ribbon 70 31.8 

(ACMEDS101) 

13 

Sold in Full Skids Only 

AMERICAN MADE

Regular Duty 200' Coils of Steel Strapping in Self Dispensing Cartons 

BLACK PAINTED AND WAXED – DO NOT USE WITH WING SEALS 

Convenient 300' rolls for use with the ST1916, ST1902, ST101 and ST111 Tensioners and the 

Appropriate Sealer with Snap-on, Thread-on or Pusher Seals. 

Average Feet/ Wt. (Lbs.) 

Catalog No. EDP No. Width Thickness Description Fracture Load Roll Each Catalog No. 

STD304V D1215RD 1/2" .015 Black Painted 900 300 9.7 1804041 




Seals 

There are three basic types of seals. The following 

information will aid in seal selection: 

• The type tensioner employed determines 

which seal to use 

• The strap width determines the seal size 

Snap-on 

Snap-on Semi open 

R.D. Type H.T. Type Pusher type seals are used with pusher type 

Snap-on seals may be used with all except pusher type and magazine fed 

tensioners. Placed on the overlapping strap ends during or after tensioning, 

they facilitate speedy strapping. 

tensioners. Pushing against the seal tensions the 

strap. These are recommended for bundling rods 

and tubes and for coil strapping. 

Thread-on seals may be used with all 

tools except pusher type and magazine 

fed tensioners. Pre-threaded on the 

overlapping strap ends before the strap 

is tensioned, they are excellent for use 

on narrow operating surfaces, on bales 

or bundles, or where it is desirable to 

form a loop with the seal holding the 

strap. 

Regular Duty 

Seal Seal Std. 

Size Catalog Seal Length Std. Pkg. 

In. mm No. EDP No. Type (in.) Pkg (lbs.) 

Wt./ Tensioning Tool Sealing Tool 

3/8" 9.53 ST1501 1303105 Snap-on 1 5000 20 M1300 M110038 

ST1531 1303445 Pusher 1 5000 35 M1900 M112038 

1/2" 12.70 ST1502 1502 Snap-on 1 6000 32 M1300 M110012 

ST1532 1304446 Pusher 1 3000 26 M1900 M112012 

5/8" 15.88 ST1503 1503 Snap-on 1 4800 30 M1300 M110058 

ST1533 1305445 Pusher 1 5000 53 M1900 M112058 

3/4" 19.05 ST1504 1504 Snap-on 1 5000 36 M1300 M110034 

ST1534 1306250 Pusher 1 4000 48 M1900 M112034 

High Tensile 

Double 

Downcut 

Single 

Downcut 

3/4" 19.05 ST813-SO 2303302 Snap-on 2-1/4 1500 39 M1480 M1470 M1400 M310034 

double notch 

ST813 813XXPLAIN Thread-on 2-1/4 850 22 M1480 M1470 M1400 M300034 M310034 

double notch 

ST816 2301205 Pusher 2-1/4 700 29 ST686-D G686D M310034 

double notch 

1-1/4" 31.8 ST823-SO 823-SO Snap-on 2-1/4 1000 40 M1480 M1470 M1400 M3000114 M3100114 

double notch 

ST823 2301007 Thread-on 2-1/4 1000 40 M1480 M1470 M1400 M3100114 

double notch 

ST828 2300391 Pusher 2-1/4 700 44 ST686-D G686D M3100114 

double notch 

2" 50.80 ST806* 2301609 Thread-on 3-3/4 300 63 DTW210 DSA250 

triple notch 

Double 

Upcut 

Single 

Upcut 

14

Steel Strapping Tensioners 

FEEDWHEEL MANUAL TENSIONER 

• moderate tension capability 

• unlimited strap take-up 

• strap can be used directly from coil 

CONVENTIONAL 

Use Windlass Tools for high tension applications 

AMERICAN MADE QUALITY 

Tensioners are classified into two basic types – 

conventional and pusher. The conventional type 

has a base which rests on the surface to be 

strapped. A part of it is always positioned 

between the strap and the surface. Pusher type 

tools tension by pushing against the seal (pusher 

seals only), without the strap passing over the 

tool base. No tension is lost when the tool is 

removed, which is ideal for small irregular shape 

packages. Pusher tools also incorporate a 

breaker nose to cut the strap at the seal. 

PUSHER MANUAL TENSIONER, 

RACK TYPE 

• re-settable limited strap take-up 

• strap can be used directly from coil 

• breaker nose cuts strap 

• easy to thread 

PUSHER 

Depending on your package shape (flat surface – 

conventional vs. small and irregular – pusher), 

choose a tensioner from feedwheel, windlass, 

or pusher. 

Combination tools which tension, seal and cut 

the strap are also available. 

INDUSTRIAL QUALITY 

Steel Strapping Tools for Flat Surfaces and Regular Duty Strap – (3/8" to 3/4") 

Versatile and easy to thread, this tool permits the slack to be pulled up by hand. The ST1916 is 

very popular for general packaging – strapping boxes, palletizing and unitizing. The ST1916 has 

high tension capability and take-up is unlimited. 

Weight (Each) 


ST1916 (M1300) 01916 3/8"-3/4" RD 5.0 2.3 

(.023 max.) 

Double downcut (two notch) sealer for use with regular duty strapping on flat surface 

applications (.023 thick max.). 

Weight (Each) 


ST1951DDC (M110038) 01951 3/8" RD 2.5 1.1 

ST1952DDC (M110012) 01952 1/2" RD 2.5 1.1 

ST1953DDC (M110058) 01953 5/8" RD 2.5 1.1 

ST1954DDC (M110034) 01954 3/4" RD 2.5 1.1 

Steel Strapping Tools for Round Surfaces and Regular Duty Strap – (3/8" to 3/4") 


Heavy duty windlass type tensioner for use with stainless steel or black Steelbinder ® strapping. 

It features a cutter and hammer knob for wing seal closing. For use with 3/8" - 3/4" wide 

strapping in thicknesses up to .030". Highly portable, fast, reliable ratchet type tool. For sign 

hanging, insulation work, general applications, and packaging use. 

Catalog No. EDP No. Strap Size Weight (Each) 

ST101 (M1900) 01101 Steelbinder ® Tensioner 3.0 

Single upcut (one notch) sealer for use with regular duty strapping on round applications – 

bundles, etc. (.023 thick max.). 

Weight (Each) 


ST1951UC (M112038) 11951 3/8" RD 2.5 1.1 

ST1952UC (M112012) 11952 1/2" RD 2.5 1.1 

ST1953UC (M112058) 11953 5/8" RD 2.5 1.1 

ST1954UC (M112034) 11954 3/4" RD 2.5 1.1 

15

Steel Strapping Tools for Flat Surfaces and 

High Tensile Strap – (3/4" to 2") 

The ST684 is like the ST1916 except it is made for high tensile strap. Lightweight and fast, 

especially with snap-on seals, the ST684 is ideal for medium to heavy boxed or crated machinery, 

unitizing and palletizing. American Made Quality. 

Weight (Each) 


ST684 (M1400) 00684 3/4" – 1-1/4" HT (.035" max.) 8.5 3.9 

AMERICAN MADE QUALITY 

These windlass tools develop very high tension, for use on flat surface in applications such as 

rail, truck and shiploading, unitizing and palletizing. 

Weight (Each) 


ST603 (M1470) 00603 3/4" – 1-1/4" HT (.050" max.) 12.0 5.4 

The ST601 has the same high tension as the ST603 and features a convenient built-in strap 

cutter to remove the “pigtail” after the joint is sealed. 

Weight (Each) 


ST601 (M1480) 00601 3/4" – 1-1/4" HT (.050" max.) 15.0 6.8 

Single downcut (one notch) for high tensile, these sealers are normally used in a horizontal 

plane. The single handle closure operates in a 90 degree arc on non-pusher applications Normal 

applications are flat packages, rail, ship or truck loading bands. Two sets of notches are 

recommended. A very popular strapping tool. 

Weight (Each) 


ST610-35 (M300034) 61035 3/4 – .035" HT max 10.0 4.5 

ST621-35 (M3000114) 62135 1-1/4" – .035" HT max 11.5 5.2 

★ 

Specialty Tool Seal Saver 

Model ST2306 Seal Saver Tool Easy and fast to operate, strong reliable sealless joint, reduces 

costs, low maintenance, durable – years of dependable service. 

Catalog No. Strap Type Strap Width Wt. (Lbs.) Ea. 

REGULAR DUTY 

ST2303 RD 3/8" to .020" 7.5 

ST2306 RD 1/2" to .023" 8.6 

ST2306 RD 5/8" to .023" 8.6 

ST2306 RD 3/4" to .023" 8.6 

Catalog No. Strap Type Strap Width Wt. (Lbs.) Ea. 

HIGH TENSILE 

ST2306 HT SD/HT 1/2" to .022" 8.6 

ST2306 HT SD/HT 5/8" to .022" 8.6 

ST2306 HT SD/HT 3/4" to .022" 8.6 

Steel Strapping Tools for Round Surfaces and 

High Tensile Strap – (3/4" to 1-1/4") 

The ST686-D uses strap from the coil and has a breaker nose that cuts the strap. Easiest to 

operate of the pusher heavy duty tools, the ST686-D is for round or irregular shapes, heavy 

bundles, metal coil pallet tie-downs, unitizing and any other irregular shaped products where 

high tension is required. Resetting the rack provides additional take-up. 

Weight (Each) 


ST686-D (G686D) 00686 3/4" – 1-1/4" HT (.035" max.) 7.0 3.2 

DTW210 (306175) 00210 2" – .050 HT 

Double upcut for high tensile, the ST679 sealers are for pusher or conventional applications 

where the seal is flush with the package; jaws reach for the seal. The single handle closure, 

90 degree arc accomplishes two sets of notches. Lightweight. 

Weight (Each) 


ST679 3/4 DC (M310034) 34679 3/4" – .035" HT max. 6.5 2.9 

ST679 1-1/4 DC (M3100114) 14679 1-1/4" – .035" HT max. 6.5 2.9 

DSA250 (00414.98) 00250 2" – Chrimper 

16

Steel Strapping Cutters 

ST502 CUTTER/HAMMER – cuts up to 3/4" 

The ST502 Cutter/Hammer for use with any type of strapping up to 3/4" x .030". Doubles as a 

hammer to close wing seals. Long lasting blades withstand years of service. Made in USA. 

Weight (Each) 


ST502 G502 3/8" – 3/4" x .030" 1.0 0.5 

ST540 SAFETY CUTTER – cuts up to 1-1/4" 

The ST540 cutter has rubber pads which hold the strap while cutting and gently relieve the build-up 

strap tension. Government approved. Patented. Cuts strap up to 1-1/4" x .035". Made in USA. 

ST540 CGXA719469 Up to 1-1/4" x .035" 2.0 0.9 

ST545 MEDIUM DUTY CUTTER – cuts up to 1-1/4" 

The ST545 medium duty cutter is for use with High Tensile Strapping up to 1-1/4" x 0.31". 

ST545 (M2100) 00545 Up to 1-1/4" x .031" 3.0 1.4 

ST550 HEAVY DUTY CUTTER – (Handle Length 22") cuts up to 2" 

The ST550’s duckbill nose slips easily under tensioned strap and its single handle action (the 

lower handle is stationary) provides the leverage to cut strap up to 2" x .050". This cutter 

features blades that are removable for sharpening. Made in USA. 

ST550 (M2300) 00550 Up to 2" x .050" 7.0 3.2 

ST555 SAFETY CUTTER – (Handle Length 24") cuts up to 1-1/4" 

The ST555 Safety Cutter is a long handle version of the Model ST540 Safety Cutter. The extended 

handles provide for a long reach and greater leverage. Patented. Made in USA. 

ST555 CPXC873832 Up to 1-1/4" x .035" 4.0 1.8 

Plastic Strapping System 

POLYPROPYLENE STRAPPING (ask about our full line of polyester) 

Polypropylene is the most economical type of plastic strap and is adequate in many 

applications. Polypropylene does not require the use of scored seals. UPS shippable. 

Break Coil Coil 

Catalog No. Width" x Strength EDP No. ID" x Face " Ft./Coil Weight Per Box 

H12300BK8 ST1/2 x 300H 30088 8" x 8" 9,000 21 1 

H12300BK3 ST1/2 x 300H 30163 16" x 3" 4,500 11 2 

H12300BK6 ST1/2 x 300H 30166 16" x 6" 9,000 22 1 

H12500BK3 ST1/2 x 500H 50163 16" x 3" 3,600 15 2 

H12600BK8 ST1/2 x 600H 60088 8" x 8" 7,200 35 1 

H12600BK3 ST1/2 x 600H 60163 16" x 3" 3,600 19 2 

H12600BK6 ST1/2 x 600H 60166 16" x 6" 7,200 37 1 

H161000BK3 ST5/8 x 1000H 10163 16" x 3" 2,200 17 2 

NON-WOVEN POLYESTER “CORD” STRAPPING – 3" ID x 5-1/2" Face 

“Ribbed” cord strapping is excellent for bundling or tying cut pieces of industrial or hydraulic 

hose. Cord strapping ties a very firm, flat knot and has very little stretch. 

Catalog Break Coil Coil 

No. Width Strength Color Ft./Coil Weight per Box 

ST20 R (P20) 1/4" 350# White 7,800 17 4 

ST30 R (P30) 3/8" 525# White 5,250 17 4 

ST40 R (P40) 1/2" 700# White 3,900 17 4 

ST50 R (P50) 5/8" 850# White 3,000 17 4 

ST60 R (P60) 3/4" 1050# White 2,100 17 4 

BUCKLES FOR POLYPROPYLENE STRAPPING AND CORD 

Steel buckles for hand strapping or use with Tensioners. Plastic buckles for hand strapping 

polypropylene only. 

Catalog Quantity/ Wt. Lbs. 

No. EDP No. Sealer Tensioner Description Carton Carton 

ST3287 SPWEX04131 –– STTPW2 3/8" – 1/2" Steel Buckle 1000 22 

ST3288 SPWEX05138 –– STTPW2 5/8" Steel Buckle 1000 24 

STPLB4 SPVZX04139 –– –– 1/2" Plastic Buckle 1000 5 

STPLB5 SPVZX05136 –– –– 5/8" Plastic Buckle 1000 6 

POLY SEALS 

For use on flat surfaces with the STSPP-2 sealer and STTPW-2 tensioner. 

Catalog Quantity/ Wt. Lbs. 

No. EDP No. Sealer Tensioner Description Carton Carton 

ST3255 SO-1/2 03255 SPP-2-1/2" STTPW-2 1/2" Open Seal 2500 28 

(1378008) 

ST3256 SO-5/8 SPLEX05150 STSPP58-5/8" STTPW-2 5/8" Open Seal 2500 33 

17

Plastic Strapping Tools 

This manually operated tensioner has a windlass drum for positive high tension take-up. 

Pushing the tension handle forward cuts the loose end of the strap after the seal has been 

sealed. See the chart below for seal and sealer usage with polypropylene, polyester and nylon 

strapping. The STTPW-2 also works well with wire buckles. Shipping weight: 3.5 pounds. 

Weight (Each) 


STTPW-2 (M300) 00002 3/8" – 3/4" Plastic 3.5 1.4 

STRAP SEALER SEAL 

1/2" Polypropylene STSPP 2-1/2" ST3255 SO 

5/8" Polypropylene STSPP58-5/8" ST3256 SO 

MODEL STSPP-2 

The STSPP-2 sealer is specifically designed for use with polypropylene strapping in palletizing 

and general packaging applications with the STTPW-2 tensioner. The triple friction grip forms 

exceptionally efficient joints. 

STSPP-2 (M10012) 00122 1/2" Plastic 4.0 1.8 

STSPP58 (M10058) 01977 5/8" Plastic 4.5 2.0 

MODEL ST4-1680 

This dispenser offers proven reliability and efficient strap dispensing of 8" I.D. x 8" face or 9" 

I.D. x 8" face or 16" I.D. x 3" or 6" face coils. Adjustable brake arm prevents strap overrun while 

rubber tires provide mobility. A handy tray holds tools and seals. UPS shippable. 

ST4-1680 (ACMEDS115) 41680 1/2" – 3/4" Plastic 60.0 27.2 

POLY PAC KIT 

This convenient, portable strapping kit is designed in a compact and economical lightweight 

box. It is ideal for offices, stores, warehouses and low volume shippers. It contains everything 

needed for shipping purposes and weighs only 14 lbs. 

ST 1/2" PAC (H12300KIT) 12300 1/2" Plastic 14.0 6.4 

Each portable strapping kit contains: 

• 3,000 feet of high quality 1/2" plastic strapping. 

• 300 1/2" wire buckles. 

• A sturdy hand-held tensioning and cutting tool. 

• A complete set of instructions, with illustrations printed on the box. 

• A protective cardboard sleeve to prevent shipping damage. Can be shipped UPS 

Hand Stretch Wrap Dispensers 

Rugged hand stretch wrap dispenser accommodates 12" to 20" wide rolls of stretch wrap. Unit 

has tension control knob and ball bearing for long life. 

Weight 

Catalog No. EDP No. Description (Lbs.) 

ST12-20-HD CGXA718255 Hand Stretch Wrap Dispenser 4.5 

Wirebinder TM Tying Wire 

Multi-purpose Black Annealed, 16 Gauge tying wire coils which fit in standard reels. 16 gauge. 

(Full cases only, 20 per case.) 336 ft. per coil. 

Catalog No. EDP No. Coils/Case Wt./Coil 

ST3.5-16B WWEC291601 20 3.5 

18


ST-001 and ST-402B 

Spin Tight Tools 

Instruction Sheet 

1) To eliminate 

waste, pull band 

from carton as 

needed. With ears 

of buckle away 

from operator, 

slide the buckle on 

the banding. Lace 

banding around 

the object being 

clamped and 

again thru buckle. 

2) Follow same steps 

to double wrap for 

added radial 

compression. 

Bend end of band 

under buckle. 

3) Slide band in tool 

nose slot. Press 

down on gripper 

with thumb and 

tension clamp by 

turning the handle. 

Maximum tension 

has been reached 

when the band 

stops moving 

through the 

buckle. 

5) Lift cutter lever and 

band will be cut to 

correct length. On 

smaller size 1/4" 

and 3/8" buckle, a 

stub remains after 

band is cut. 

4) When maximum 

tension has been 

reached, roll tool 

over buckle. At 

same time 

reversing handle 

carefully approx. 

3/4 turn to avoid 

breakage. The 

band that is 

released will be 

used in the bend 

and therefore 

there is no loss 

of tension. 

6) While holding the 

stub of the band 

with your thumb, 

hammer flat over 

bridge of buckle. 

Complete 

application by 

hammering the 

buckle ears over 

the stub. 


Acme Distributor Sales


HBC-300 and HBC-301 

Center Punch Tools 

1) Push ball handle forward. This will open the 

front slot. Insert clamp tail and tension by 

lifting and lowering tension handle. 

2) When sufficient tension has been reached, 

secure the clamp by lowering the punch 

head onto the lock and strike a minimum 

of 2 times with a 2 lb. mallet. 

3) Apply forward and backward movements of 

the tool to break off the clamp tail. 

4) Remove the tail by ratcheting the ball 

handle. Raise handle and pull tail free. 

HBC-032 3/8" adapter can be purchased 

separately and inserted into front of tool for 

use with 3/8" wide clamps or use HBC-301 

tool with adapter permanently installed. 


Acme Distributor Sales

StrapbinderÂ® - Acme Packaging

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?