AFR Catalog (PDF) - Alliance Fire and Rescue Inc.

Traditional Style Structural Fire Helmets................. 3 - 4 

Metro Style Structural Fire Helmets............................. 3 

Lights....................................................................... ...3 

Jet Style Structural Fire Helmets.................................. 4 

Brushfire Helmets....................................................... 4 

Utility Helmet............................................................. 5 

Rescue Helmets..................................................... 5 - 6 

Water Rescue Helmets................................................ 6 

Helmet Standards Chart.............................................. 7 

Electronic Warning Beacons.................................. 8 - 9 

Fire Gloves............................................................... 10 

Clean-Up Gloves.......................................................11 

Extrication Gloves......................................................11 

Disposable EMS Gloves.............................................11 

Gear Bags................................................................. 12 

Goggles.................................................................... 12 

Protective Eyewear.................................................... 13 

Safety Gear........................................................ 14 - 15 

Fire-Resistant Hoods................................................. 16 

Hand Sanitizer.......................................................... 17 

Respirators................................................................ 17 

Communications....................................................... 18 

Electrical Safety......................................................... 19 

Pacific Helmets 

Offer the ultimate in protection, flexibility, comfort and safety. These 

Dupont Kevlar ® lined helmets are lighter in weight and provide 

superior impact protection and heat resistance compared to most other 

popular helmets. Pacific Helmets are the only helmets that offer the 

optional built-in flashlight holder for improved hands-free illumination. 

Why DuPont Kevlar ® ? 

The benefits include: 

Sheer Strength - the shell is virtually unbreakable as Dupont Kevlar ® 

retains it’s integrity and will not tear. Dropping a complete helmet will 

often mark the paint or even chip through to the fabric, however, the 

shell will rarely break or split. 

Light Weight - matched against the equivalent woven fiberglass 

material, Dupont Kevlar ® is 20% lighter. This creates a helmet that is 

as much as 100gms lighter than a fiberglass reinforced helmet. 

The Best Warranty 

In The Industry! 

Pacific Helmet 

Warranty Information 

Pacific Helmets’ Dupont Kevlar ® 

reinforced outer shell is backed 

by a 6-year limited warranty. 

Each helmet also carries a 2-year 

limited warranty on impact liners and 

ratchet suspensions. Internal parts including crown pads, 

ribbons and sweatbands are NOT covered by this warranty. 

An organization created to provide superior personal protective products that meet the needs 

of fire fighters and first responders. Alliance Fire and Rescue, Inc. is the exclusive 

supplier of Pacific Helmets of New Zealand in the United States, Canada and Puerto Rico. 

2 

alliancefireandrescue.com • Toll Free (866) 825-2124

General Features 

• Lightweight Dupont Kevlar ® and 

composite resin shell offers superior 

strength and durability 

• Shell weighs less than competitive models 

• Composite resins offer higher temperature 

resistance (up to 600°F) without distorting 

or melting 

• High-gloss paint finish available in a 

variety of colors including hi-vis and 

photoluminescent 

• Ratchet headband with easy-to-adjust 

dial which accommodates a variety of 

head sizes (54 - 64cm) 

• Shell is not affected by UV rays 

• The Dupont Kevlar ® shell could last up 

to 10 years or longer when properly 

maintained 

Bourke Traditional 

Standard Clear Lenses 

GSPAFD-C 

AFR0107 

Traditional 

Structural Helmets 

F3C 

Metro 

Features 

• 2-point Nomex ® chin strap made from fire resistant Nomex ® webbing with quick-release 

nexus wideguard buckle and postman’s slide fastener 

• Polyurethane impact liner provides structural integrity and heat resistance and features an 

adjustable 6-point nylon head cradle with grain leather sweatband for comfort 

• 4” Paulson adjustable face shield - .110cm thick hard coated shield resists scratches 

• 2-ply Nomex ® neck protector for ear and neck protection 

• Rear hanger with generous opening for easy storage 

• Reflective trim - each helmet comes with NFPA standard reflexite trim package for high 

visibility 

• The Traditional offers a stamped brass eagle to provide a traditional look with leather 

fronts (optional) 

AFR0107 Traditional 

Certified to NFPA 1971 - 2007, Compliant with 

ANSI Z89.1 

F3CT 

Compatible with both AFR0107 Traditional 

and F3C Metro helmet styles only. 

In the early 1960s, eye protection was not 

widely used among firefighters. That would 

change after a New York City firefighter 

was hit in the face with a piece of angle 

iron during a fire. 

That firefighter was Lester (Les) Bourke, and 

he worked at FDNY Engine Company 231 

in Brooklyn. Les was working the hose line 

inside a burning auto repair garage, when 

the hose spray hit a piece of angle iron that 

was attached to the ceiling with a single 

bolt. The angle iron started swinging, and 

the end of it hit Les in the forehead – right 

under the brim of his fire helmet. 

The force of the hit knocked Les to the 

ground and left him momentarily 

blinded by the blood gushing 

from his forehead. Although the 

cut healed over time, Les was left 

with a desire to find a way to 

protect his eyes from dangerous 

objects he encountered while firefighting. 

14439 eLED 

The 14439 eLED torch by UK features unique 

dual-element projection optics that let you 

zoom (focus) from wide beam to an intense 

spot beam. O-ring sealed against water, mud 

and dust. LED will not break or burn out. 

Rubber covered push button thumb switch. 

Powered by 4 AA alkaline cells, 

(included). Also available 

14120 Xenon 

Torch compatible with 

F3CT, F3CTXL, R5T 

(located on page 5) and 

R7GT (located on page 6) 

F3C Metro 

Certified to EN443: 2008 EN 14458, AS4067, 

NFPA 1971 - 2007, Compliant with EN433:1977 

and ANSI Z89.1 

F3CXL 



and ANSI Z89.1, Large Profile for Added 

Protection from Overhead Hazards 

F3CT 



and ANSI Z89.1, Built-in Torch Pod for Hands- 

Free Lighting (torch not included) 

F3CTXL 



and ANSI Z89.1, Large Profile for Added 

Protection from Overhead Hazards, Built-in 

Torch Pod for Hands-Free Lighting (torch not 

included) 

alliancefireandrescue.com • Toll Free (866) 825-2124 3

F7A 

Jet 

Structural Helmets 

Features 

• Light Weight Kevlar ® /Aramid Shell 

• Full Polyurethane Impact liner 

• Pacific ratchet adjustable cradle 

• 3 Point Nomex ® Chin Strap 

• Pacific Quick Release Buckle 

• Internal Eye Protector (optional) 

• ESS Goggle Posts 

F10 

Dual Certified 

F10 - Dual Certified 


NFPA 1971 - 2007, NFPA 1951 - 2007 Rescue/ 

Recovery, Compliant with EN433:1977 and 

ANSI Z89.1 

Features 

• 3-point Nomex ® chin strap made from 

fire resistant Nomex ® webbing with quickrelease 

nexus wideguard buckle 

• Polyurethane impact liner provides 

structural integrity and heat resistance and 

has an adjustable 6-point nylon head 

cradle with grain leather sweatband for 

comfort 

• Internal retractable face shield is hard 

coated, resists scratches and is adjustable 

• 2-ply Nomex ® neck protector with Velcro ® 

fastening system protects wearer’s ears 

and neck 

• Reflective trim - each helmet comes with 

NFPA standard reflexite trim package for 

high visibility (7-piece NFPA wrap) 

BR1 

Brushfire Helmets 

BR7P 

F7A 

Certified to EN443: 1997, EN443: 2008 EN 14458, 

AS4067, Compliant with NFPA 1971 - 2007, 

EN433:1977 and ANSI Z89.1, Internal Retractable 

Face Shield 

F7AT 




Face Shield, Built-in Torch Pod for Hands-Free 

Lighting (torch not included) 

F7F 




Face Shield, Internal Retractable Eye Protector 

Features 

• 2-point Nomex ® chin strap with 

quick-release buckle provides comfort 

and safety 

• Single-layer *Proban ® neck protector is 

lightweight, flame retardant, launderable 

and provides heat resistance 

• Reflective trim for high visibility 

BR1 

Certified to EN397, AS1801 Type 1 & 2, AS1801 

Type 3, Compliant with ANSI Z89.1, Rear Hanger 

with Large Diameter for Easy Hanging and 

Storage, Ear Muff Clips 

BR1T 


Type 3, Compliant with ANSI Z89.1, Rear Hanger 

with Large Diameter for Easy Hanging and 

Storage, Ear Muff Clips, Built-in Torch Pod for 

Hands-Free Lighting (torch not included) 

BR5 


Type 3, Compliant with ANSI Z89.1, Full Brim 

Features 

• 2-point polyester chin strap 

• Pacific ribbon cradle harness 

• ESS goggle strap mounts (BR7 option) 

• Reflective trim 

• Optional neck protector 

• Goggle Strap Clips (BR7P only) 

• Weighs Less than 17 oz (500 gm) 

BR7P 

Certified to NFPA 1977 - 2005 Wildlands, 

AS1801 Type 1 & 2, AS1801 Type 3, Compliant 

with ANSI Z89.1, Plastic Shell 

BR7 

Certified to NFPA 1977 - 2005 Wildlands, 

AS1801 Type 1 & 2, AS1801 Type 3, Compliant 

with ANSI Z89.1, Kevlar ® Shell 

* Proban ® material is 100% cotton with a flame retardant finish that will 

withstand sparks and flames and passes BSEN531 and BSEN470-1. 

4 




composite shell weighs less than 

competitive fiberglass and composite 

alternatives 

• Shell is not affected by UV exposure 

• Composite resins offer higher 

temperature resistance (up to 600°F) 

without distorting or melting 


variety of colors 


dial, accommodates a variety of head 

sizes (54-64cm) 

New Mesh Liner from 

Pacific Helmets 

Currently, only the KIWI Series, A10 and 

F10 offer this new liner suspension from 

Pacific Helmets’. Eventually all new 

helmets designed will incorporate 

Pacific Helmets’ innovative inside 

liner suspension. This molded inner 

suspension system has been designed 

to provide superior impact protection, 

and allow snap-in straps that are easier 

to fit and replace. 

The cradle is available in the traditional 

“6 ribbons” or a new “trampoline” mesh 

arrangement. The ratchet size system and 

headband are unchanged. 

R3 KIWI USAR 

Certified to EN443: 2008 EN 14458, NFPA 1951 

- 2007 Rescue/Recovery, AS1801 Type 1 & 2, 

Compliant with EN433:1977 and ANSI Z89.1, 

Flip-down Visor 

R3 KIWI 

Certified to EN443: 2008 EN 14458, NFPA 

1951 - 2007 Utility, NFPA 1951 - 2007 Rescue/ 

Recovery, AS1801 Type 1 & 2, Compliant with 

EN433:1977 and ANSI Z89.1 

R3V3 KIWI USAR 

Certified to EN443: 2008 EN 14458, Compliant 

with EN433:1977 and ANSI Z89.1 

R5SL 

USAR Rescue 

R3V3-KIWI USAR 

Features 

• Poly Urethane Impact Liner with mesh 

cradle 

• Ratchet size adjuster 20.5-25.2 inches 

• 3 Point Nomex ® chinstrap c/w Pacific 

Snapclip Buckle 

• ESS goggle mounting clips 

Utility Helmet 

Features 

• 3-point polyester chin strap with 

quick-release buckle keeps helmet in 

place for rescue applications 


• New scallop-sided shell designed to 

accommodate a variety of ear muffs 

• Lightest weight helmet on the market 

• Built in torch pod – (torch sold separately) 

R5 

Certified to EN397, AS1801 Type 1 & 2, Compliant 

with EN443, ANSI Z89.1 

R5T 

Certified to EN397, AS1801 Type 1 & 2, Compliant 

with EN443, ANSI Z89.1, Built-in Torch Pod for 

Hands-Free Lighting (torch not included see pg 3) 

USAR Medical 

A10 

Rescue 

R5T 

Features 

• Pacific ribbon cradle 




R5SL 

Certified to NFPA 1951 - 2007 Utility, AS1801 

Type 1 & 2, Compliant with ANSI Z89.1 

Features 

• Poly Urethane Impact Liner with mesh 

cradle 




• Eye protector 2mm c/w nose guard 

A10 

Certified to EN443: 2008 EN14458, NFPA 1951 - 

2007 Rescue/Recovery, Compliant with EN443: 

1997, ANSI Z89.1 




composite resin shell weighs less than 

competitive fiberglass and composite 

alternatives 

• Shell is not affected by UV exposure 

• Composite resins offer higher 

temperature resistance (up to 600°F) 

without distorting or melting 


variety of colors 


dial, accommodates a variety of head 

sizes (54-64cm) 

Water Rescue 

WR7H 

R7G 

Rescue 

Features 

• 3-point polyester chinstrap with quickrelease 

buckle keeps helmet in place for 

rescue applications 

• Nine removable rubber plugs for water 

evacuation or ventilation 

• Internal retracting eye protector 

WR7H 

Certified to EN397, Compliant with ANSI Z89.1, 

AS 1801 Type 1 & 2 

WR7HV 

Certified to EN397, AS 1801 Type 1 & 2, 

Compliant with ANSI Z89.1, Dynamic Sealed 

Ventilation System 

Water Rescue 

Features 

• 3-point polyester chinstrap with 

quick-release buckle keeps helmet in 

place for rescue applications 

• Internal retractable eye protector 

protects against hazards and blood 

borne pathogens 


• Certified to EN443 and compliant to 

ANSI Z89.1 and AS1808 

WR5 

R7G 

Certified to EN397, ANSI Z89.1 , Internal 

Retractable Eye Protector 

R7GT 

Certified to EN397, ANSI Z89.1, Internal 

Retractable Eye Protector, Built-in Torch Pod for 

Hands-Free Lighting (torch not included) 

R7H 

Certified to EN397, NFPA 1951 - 2007, AS1801 

Type 1 & 2, Compliant with ANSI Z89.1, Rear 

Goggle Strap, Optional Internal Retracting Eye 

Protector 

Features 

• 3-point polyester chinstrap with quickrelease 

buckle keeps helmet in place for 

rescue applications 

• Nine removable rubber plugs for water 

evacuation or ventilation 

WR5 

Certified to EN397, AS 1801 Type 1 & 2, 

Compliant with ANSI Z89.1 

6 


Standards/Compliance Matrix 


Eflare Safety Beacons 

Occupational Health and Safety 

• Will not burn personnel or uniforms 

• Does not produce toxic fumes 

• No risk of fire or explosion 

Operational Safety 

• Does not affect night vision 

• Does not exhibit point fixation 

• Does not affect distance judgment 

Environmental Pollution 

• Does not produce smoke and fumes 

• No chemical residue 

Features 

• 360° high visibility led beacons - flashing 

and steady-on 

• Visible for more than 1km at night 

• Portable, safe, easy to use, cost effective 

(2 cents/hour) 

• Bright clear colors 

• Designed for use in Class 1, Division 2/ 

Zone 2 hazardous areas 

• Up to 40 hour battery life with low battery 

indicator 

• Tough and dependable with one year 

limited warranty 

• Can be submerged in water up to 100ft. 

Specifications 

• Beam colors available: red, amber, blue, 

green and white 

• Beam brightness: 15,000 - 25,000 

millicandela 

• Max beam conspicuity: between 

horizontal and 10° above horizontal 

• Flash rate: 120 flashes per minute 

• Batteries: 2 alkaline D cells 

• Battery life: up to 40 hours at full brightness 

• Height: 8.0 inches (including base) 

• Weight: 1.00lb. (including batteries) 

Eflare Models Available 

939-EF300-A 

4 LED Flashing, Amber Color 

939-EF300-R 

4 LED Flashing, Red Color 

939-HZ610-A 

8 LED Flashing/Steady-On Beacon, Amber Color 

939-HZ610-R 

8 LED Flashing/Steady-On Beacon, Red Color 

939-HZ510-B 

8 LED Flashing Beacon, Blue Color 

939-HZ510-G 

8 LED Flashing Beacon, Green Color 

939-HZ510-W 

8 LED Flashing Beacon, White Color 

939-HZ520-A 

8 LED Steady-On Beacon, Amber Color 

939-HZ520-R 

8 LED Steady-On Beacon, Red Color 

939-HZ520-B 

8 LED Steady-On Beacon, Blue Color 

939-HZ520-G 

8 LED Steady-On Beacon, Green Color 

939-HZ520-W 

8 LED Steady-On Beacon, White Color 

939-HZ530-R/B 

2 Color, 8 LED Flashing Beacon, Red and Blue 

939-HZ530-R/W 

2 Color, 8 LED Flashing Beacon, Red and White 

939-HZ530-B/W 

2 Color, 8 LED Flashing Beacon, Blue and White 

939-HZ530-A/W 

2 Color, 8 LED Flashing Beacon, Amber 

and White 

939-HZ530-R/A 

2 Color, 8 LED Flashing Beacon, Red and Amber 

Eflare Beats 

Pyrotechnic Flares & 

Strobes in Safety! 

Beacon Colors Available 

White Red Amber Blue Green 

8 


Eflare Helicopter 

Landing Zone Kits 

Features 

• 4 units (red or amber) 

• 1 unit (blue) 

• Storage bag 

• 5 rubber bases 

• Laminated instruction card 

• Portable 

• No risk of fire 

• Indicates wind direction 

939-HZ510-A-05AB 

4 Amber Units, 1 Blue Unit 

939-HZ510-R-05RB 

4 Red Units, 1 Blue Unit 

Optional Eflare Accessories 

939-EFBASE 

Rubber Base 

939-EFMAGCLIP 

Magnet Clip 

939-EFCLIP 

Traffic Cone Clip 

939-EFMAGBASE 

Magnet Base 

939-EFFLCOLLAR 

Flotation Collar 

939-EFHOOD 

Daylight Hood 

939-EFBAG2 

2-Pack Nylon Carry Bag 

939-EFBAG4 


939-EFBAG24 




• Additional palm and thumb crotch reinforcement in critical wear area prolongs 

glove life 

• Liquid-proof liner protects against blood borne pathogens and bacteria while 

remaining flexible in subzero temperatures 

• Kevlar ® stitching won’t support combustion 

• Interior leather hang tag loop facilitates fast drying and storage 

• Sentinel barrier is compliant with the requirements for resistance to common 

chemicals and for resistance to viral and blood borne pathogens as specified in 

the NFPA 1971-2007 Edition 

Wildfire 

UL Certified Structural 

910-RGP7 

Features 

• ResponseGuard gloves are made of 

a specially tanned side split cowhide for 

superior grip and tactile sensitivity even 

after repeated soakings 

• ResponseGuard Plus gloves are made 

of a specially tanned cowhide palm and 

elk grain back 

• The 4” 2-ply Kevlar ® knitwrist and pull 

patch on the 910-RG5 and 910-RGP7 

protects the critical wrist area and allows 

easy donning and doffing 

• The gauntlet cuff on the 910-RG6 and 

910-RGP8 provides better fit in today’s 

new turnout gear 

• Available in sizes XS - XXXL 

910-RG5 

ResponseGuard , Side Split Cowhide, Black 

and Tan Color, 4” 2-ply Kevlar ® Knitwrist and Pull 

Patch 

910-RG6 

ResponseGuard , Side Split Cowhide, Black and 

Tan Color, Gauntlet Cuff 

910-RGP7 

ResponseGuard Plus , Cowhide Palm and Elk 

Grain Back, Red and Tan Color, 4” 2-ply Kevlar ® 

Knitwrist and Pull Patch 

910-RGP8 

ResponseGuard Plus , Cowhide Palm and 

Elk Grain Back, Red and Tan Color, Gauntlet Cuff 

910-BT4 

Features 

• Gloves meet NFPA 1971 - 2007 Edition 

for Protective Ensemble for Structural 

Fire Fighting 

• Side split cowhide provides superior grip 

and tactile sensitivity even after repeated 

soakings 

• Self extinguishing fiber lining is flame 

resistant and provides thermal resistance, 

warmth and comfort 

• The 4” 2-ply Kevlar ® knitwrist with pull 

patch on the 910-BT3 protects the critical 

wrist area and creates easy donning and 

doffing 

• The gauntlet cuff on the 910-BT4 

provides better fit in today’s new turn-out 

gear 


910-BT3 

Black & Tan , 4” 2-ply Kevlar ® Knitwrist and Pull 

Patch 

910-BT4 

Black & Tan , Gauntlet Cuff 

910-KCU1 

Features 

• Constructed of undyed grain cowhide 

that is specially treated for heat and 

water resistance 

• The ultimate wildfire gloves in comfort, 

dexterity and abrasion resistance and 

will remain flexible after repeated 

soakings 

• The extra-long Kevlar ® cuff with leather 

pull patch protects the critical wrist area 

and creates easy donning and doffing 

• Keystone thumb provides reinforcement, 

comfort and dexterity 

• Kevlar ® stitching won’t support 

combustion and is 5x stronger than steel 

on an equal weight basis 


910-KCU1 

KCU1 , White Undyed Grain Cowhide, Kevlar ® 

Cuff, Pull Patch 

10 


120-MX2830 

Clean-up 

Extrication 

911-AX9 

Features 

• Palm and thumb made from Amara ® 

washable synthetic leather 

• Back is constructed of stretch fabric 

to provide snug fit for increased 

grip and finger control 

• Launderable 

120-MX2820 

Yellow and Black, S - XL 

120-MX2830 

Blue and Black, S - XL 

120-MX2840 

Red and Black, S - XXL 

120-MX2805 

Black, S - XXL 

Features 

• Polyurethane and synthetic finger tips 

won’t melt and will withstand contact 

with hot materials up to 212°F (100°C) 

• Reinforced with Kevlar ® stitching 

• Index finger and thumb joint reinforced to 

minimize wear 

• Puncture-resistant palm pads 

• Abrasion-resistant fingers and knuckles 

• Reflective & padded area on back of hand 

• Gloves do not get slippery when wet or 

harden after drying 

• Elastic cuff keeps out cut glass, etc. 

• Ultimate dexterity allows user to 

manipulate all rescue tool connections 

• Anatomically designed palms for 

unparalleled freedom of movement 

• Machine washable 

• Available in Sizes S - XL 

Important Note 

911-AX9 

The 120-MX2820, 120-MX2830, 120-MX2840, 120-MX2805 and 911-AX9 are not 

blood borne pathogen-resistant gloves. For safety, the wearer must use them with a 

Latex or similar disposable glove. These gloves are not fire fighting gloves and are 

not approved by NFPA for structural or wildland fire fighting. NFPA does not have 

an approval rating for extrication gloves. 

62-327PF 

Disposable Latex EMS Gloves 

Features 

• Economical liquid proof protection 

• Powder-free 

• 13 mil. thickness 

• 12” length 

• Fully textured palm and finger grip 

• Ambidextrous 

• Packed 50 gloves per dispenser box 

• Available in sizes S - XL 

62-327PF 

Certified to NFPA 1999 Standards on 

protective clothing for emergency medical 

operations, 2003 Edition 

Applications 

• Excellent for use in EMT, fire and first 

responders 


Gear Bags 

Odyssey ® II 

StrikeTeam 

903-GB651 

Wildland 

Certified! 

903-GB653 

937-80222 

Features 

• High Temperature Material 

• Sealed “Dual” Scratch-Resistant, Anti-Fog, 

UV absorbing polycarbonate lens 

• Closed cell foam forms a snug seal 

preventing smoke from entering the 

goggle 

• Non-vented body, offering best protection 

against liquids and dust 

• Fits over prescription eyewear 

• Meets ANSI Z87.1-2003 Standards 

• Meets CAN/CSA-Z94.3 Standards 

• NFPA 1977-2005 Certified 

• Optional carrying pouch available 

937-ESS01CB 

Features 

• One-piece wrap around strap made of 

26mm-wide high-memory elastic 

• Patented Speed Clip strap system makes 

strap adjustment quick and easy, even 

with gloves on 

• Frame made from high heat-resistant 

materials 

• Full-perimeter ventilation and filtration 

system allows humidity to escape while 

filtering out dust, smoke and particles 

• Lenses feature ESS ClearZone anti-fog 

and anti-scratch lens coatings 

Alliance Fire and Rescue, Inc. takes pride 

in the quality products that we offer first 

responders. Our selection of gear bags 

is no exception. Our extra-large, step in 

bags are ideal for all of your turn out gear 

and accessories. 

937-80222 

Wildland Certified Goggle 

X-Tricator 

937-ESS01CB 

StrikeTeam Wildland Goggle 

Innerzone 2 

Features 

• “U-shaped” metal stays on the top of 

the bag help keep the bag open for 

quick and easy donning and doffing of 

turn out gear 

• Separate interior pocket is ideal for 

storing SCBA mask, helmet, or wet gear 

• Exterior pocket for accessories 

• Additional interior pass-through pocket 

for equipment stowage 

• 2” wide strapping supports extra weight 

• Adjustable contoured padded shoulder 

strap provides comfort and keeps bag in 

position when carried 

• Extra-heavy tarp-style bottom with 5 

raised cleats provide superior abrasion 

resistance to prolong bag life and help 

keep gear dry 

• Fully launderable 

903-GB651 

28”(L) x 22”(H) x 16 ½”(W), Red 

903-GB652 

28”(L) x 22”(H) x 16 ½”(W), Blue 

903-GB653 Wheeled Gear Bag 

28”(L) x 22”(H) x 16 ½”(W), Red 

937-ESS01CBEX 

Features 

• Patented Snap-on/Snap-off mounting 

system allows goggles to be stowed in 

front or rear of helmet, or quickly 

removed and stored in pocket 

• Strap grommets snap on and off the 

mounting brackets 

• The X-Tricator can be used on a 

helmet alone or together with flip-downs 

or a face shield 

• Frame made from high heat-resistant 

materials 



937-ESS01CBEX 

X-Tricator Rescue Goggle 

937-ESS01GY2-WF 

Features 

• Patented Snap-on/Snap-off mounting 

system allows goggles to be stowed in 

front or rear of helmet, or quickly 

removed and stored in pocket 

• Strap grommets snap on and off the 

mounting brackets 

• The Innerzone 2 can be used on a 

helmet alone or together with flip-downs 

or a face shield 

• Full-perimeter ventilation and filtration 

system allows humidity to escape while 

filtering out dust, smoke and particles 



937-ESS01GY2-WF 

Innerzone 2 Fire Goggle 

12 


Fusalage 

FlashFire 

Hi-Voltage DC 

250-50-0420 

250-60-0626 250-22-0000 

fuselage 

Dust Goggle 

 

Features 

• Soft rubber temple and bridge pads 

provide a comfortable and secure fit 

• Black frame with gray foam 

• Detachable temples and strap (included) 

can be changed 

in seconds, 

no tools 

required 

250-50-0420 

Clear Hard Coat, Anti-fog Lens 

250-50-0421 

Gray Hard Coat, Anti-fog Lens 

250-50-0429 

Amber Hard Coat, Anti-fog Lens 

Features 

• All FlashFire styles meet the requirements 

of ANSI Z87+ 

• All lenses are hard coated polycarbonate 

with anti-fog coating 

250-60-0626 

Silver Frame with Blue Pads, Blue Mirror Lens 

250-60-0628 

Black Frame with Red Pads, Silver Mirror Lens 

250-60-0625 

Silver Frame with Red Pads, Red Mirror Lens 

250-60-0630 

Silver Frame with Green Pads, Green Mirror Lens 

250-60-0620 

Silver Frame with Blue Pads, Clear Lens 

250-60-0020 

Black Frame with Red Pads, Clear Lens 

Features 

• Semi-rimless design with wrap around lens 

• Ratchet temples for better angle 

adjustments 

• Indoor/Outdoor lenses available 

250-22-0000 

Black Frame, Clear Hard Coat Lens 

250-22-0002 

Black Frame, Indoor/Outdoor Lens 

250-22-0001 

Black Frame, Gray Lens 

250-22-0500 

Gunmetal Gray Frame, Clear Hard Coat Lens 

250-22-0502 

Gunmetal Gray Frame, Indoor/Outdoor Lens 

250-22-0501 

Gunmetal Gray Frame, Gray Lens 

Hi-Voltage Megawatt Zenon Z12 Zenon Z28 

250-20-0000 250-01-0002 250-03-0000 

Features 

• Excellent safety with maximum style 

• Adjustable spatula temples for a secure fit 

• Flexible ribbed nose piece for maximum 

comfort and fit 

• Wrap around lens design eliminates distortion 

250-20-0000 

Semi-Rimless, Black Frame, Clear Hard Coat Lens 

250-20-0001 

Semi-Rimless, Black Frame, Gray Lens 

250-20-0007 

Semi-Rimless, Black Frame, Gold Mirror Lens 

250-20-0002 

Semi-Rimless, Black Frame, Indoor/Outdoor Lens 

Features 

• Rimless design for light weight 

• Relaxed bridge design fits most wearers 

• Thin, flexible temples provide secure fit 

without uncomfortable pressure points 

• CE certified 

250-01-0002 

Black Temples Only, Indoor/Outdoor Lens 

250-01-5509 

Amber Temples Only, Amber Hard Coat Lens 

Features 

• “Over-The-Glass rimless eyewear 

• Can also be worn as a safety glass by itself 

• Adjustable temples for a more accurate fit 

250-03-0000 

Black Temples, Clear Hard Coat Lens 

250-03-0080 

Black Temples, Clear Non-Coated Lens 

250-03-0001 

Black Temples, Gray Lens 

Custom imprinting available on select eyewear styles, call for details... 


“SHERIFF” SAFETY VEST 

“FIRE” SAFETY VEST 

Features 

• Mesh top and solid bottom 

• 5 point breakaway system 

• Zipper front 

• Breakaway zipper front 

• Microphone tabs on left and right chest 

• Adjustable sides 

• “Fire” printed on the front and back 

• Color Lime yellow and red 

• Sizes: S/M, L/XL, 2X/3X, 4X/5X 

CLASS 2 

SG-PSV-RED 

ANSI 207-2006 - PUBLIC SAFETY VEST - Class 2 

Features 




• Pen pocket 



• “Sheriff” printed on the front and back 

• Color Lime yellow and brown 


CLASS 2 

SG-PSV-BRN 


“POLICE” SAFETY VEST 

Features 




• Pen pocket 



• “Police” printed on the front and back 

• Color Lime yellow and blue 


CLASS 2 

SG-PSV-BLU 


14 


ECONOMY - SOLID VEST UNIVERSAL - MESH VEST ECONOMY - SOLID VEST 

Features 

• 2” reflective tape: two horizontal stripes 

and two vertical stripes 

• Flame retardant treated fabric 

(up to 12 washes) 

• Background material meets NFPA 701 

(2004) 

• Hook and loop fastening 

• Silver reflective tape 

• Color lime yellow 

• Sizes: M - 5XL 

CLASS 2 

SG-WCENG-FR 

ANSI 107-2004 - ECONOMY VEST - CLASS 2 

Features 

• Background material is treated to meet 

NFPA 701 (2004) 

• Flame retardant treated mesh fabric 


• Single horizontal stripe with contrast, two 

shoulder stripes with contrast 


• Sizes: All (universal fit) 

SG-USV5-FR LY 

ANSI 107-2004 - MESH VEST - CLASS 2 

CLASS 2 

Features 

• 2” reflective tape: two horizontal stripes, 

two vertical stripes and two sleeve stripes 

• Flame retardant treated fabric 


• Background material meets NFPA 701 

(2004) 

• Hook and loop fastening 



• Sizes: M - 5XL 

CLASS 3 

SG-HSSV-FR LY 

ANSI 107-2004 - ECONOMY SOLID VEST - CLASS 3 

REVERSIBLE BOMER JACKET 

CREW NECK T-SHIRT 

Features 

• Heavyweight 100% polyester with PU coating 

• Water repellent 

• Fully reversible bomber jacket 

• 4 exterior pockets 

• Storm cuffs with velcro adjustment 

• When worn alternate way black body 

• Full utility belt access to zip on both sides 

• Colors: Hi-Viz Orange (SG-PSRJKT-OR) or, Lime Yellow (SG-PSRJKT-LY) 

• Sizes M - 5XL 

CLASS 3 

SG-PSRJKT 

ANSI 107-2004 - PUBLIC SAFETY FULLY REVERSIBLE BOMBER JACKET - CLASS 3 

Features 

• Economy, Crew Neck T-Shirt 

• Polyester sports knit 

• Left chest pocket 

• Moisture wicking fabric 



• Sizes M - 5XL 

CLASS 3 

SG-CNTS-E 

ANSI 107-2004 - CREW NECK T-SHIRT - CLASS 3 



Alliance Fire and Rescue, Inc. uses a variety 

of fibers to create the highest quality knitted 

“sock” style hoods that provide the wearer 

with protection from flash fire hazards. The 

2-ply construction adds thermal insulation in 

cold weather conditions. 

Nomex ® Protective barrier. A key factor in 

the thermal protection Nomex ® provides is 

that it carbonizes and thickens when exposed 

to the intense heat of today’s fires. This 

increases the protective barrier between the 

heat source and the skin and minimizes burn 

injury. This tough, protective barrier stays 

supple and flexible until it cools, which gives 

you valuable extra seconds of protection 

when you need it most. 

906-100NOM7 

Structural Fire Hoods 

906-2080NOL7BLK 

Nomex ® Durability. Garments made from 

Nomex ® are also durable — lasting, on 

average, two to three times longer than 

most other standard and protective fabrics, 

including 100% cotton, polyester/garment 

blends and FRT cotton. In fact, industrial 

launderers estimate that the average wear 

life of protective apparel made of Nomex ® 

is approximately five years, and that it can 

be washed and worn at least 125 times. 

Comparatively, garments made of FRT cotton 

can be washed and worn an average of only 

36-50 times. 

Lenzing FR ® is a specialty viscose fiber. The 

abbreviation FR stands for “flame resistant”. 

Lenzing FR ® is a natural fiber derived from 

wood. It offers protection 

from heat and flame in 

a variety of different 

applications. 

Unique 

thermal 

insulation 

properties 

combined 

with permanent 

flame 

resistance 

make Lenzing 

FR ® a “Heat 

Protection Fiber”. 

It offers protection 

from all kinds of heat 

and its functional 

properties help to 

prevent heat stress 

and heat stroke. 

Lenzing FR ® keeps 

the body dry and 

cool. Heat stress 

and heat stroke 

can be avoided. 

Features 

• 100% Nomex ® 

• Excellent for flash protection and limited 

chemical splash protection 

• Superior wear and durability 

• Our most popular hood 

906-100NOM7 

TPP Rating 24.4 (Thermal Protective Performance) 

906-2080NOL7 

Features 

• 20% Nomex ® and 80% Lenzing FR ® 

• This fabric combination provides comfort 

and breathability 

• The most cost effective solution to your 

NFPA requirements 

906-2080NOL7 


Features 

• 20% Nomex ® and 80% Lenzing FR ® 

• This fabric combination provides comfort 

and breathability 

• The most cost effective solution to your 

NFPA requirements 

906-2080NOL7BLK 


906-8416CT 

Features 

• 84% Carbon and 16% Technora ® 

• Carbon Fiber is light weight and 

provides excellent fire resistance 

• Technora ® adds strength, durability, 

and helps hood retain its shape when 

laundered 

906-8416CT 


16 


Benzalkonium 

Chloride 0.13% 

X3 clean is the safe alternative to alcohol-based gel 

hand sanitizers: 

Safe - Non-Flammable, Non-Toxic, Non-Corrosive 

Gentle - Alcohol free, fragrance free, and residue free 

Effective - Kills 99.99% of germs 

3X More - Get three times the number of 

applications per ounce compared to gel sanitizers 

Save! - Reduce absenteeism by 30% 

Fact: 80% of all infections are transmitted by hands. The 

answer seems simple. Wash your hands and reduce the risk 

of infection and illness. 

Reality: Life is busy. Access to soap and water isn’t always 

possible. 

183-10010 

183-10003 

183-10112 

Solution: X3 Clean Foaming Hand Sanitizer kills germs in 

less than 15 seconds when handwashing isn’t possible. 

Cleanser Products 

183-10002 X3 Clean Personal Size Foaming Spray Bottle, 2.5 Oz 

183-10003 X3 Clean Counter Top Foaming Spray Bottle, 1 Liter 

183-10004 X3 Clean Economy Refill, 4 Liters (1.05 Gallons) 

183-10006 X3 Clean Cartridge Filled Bottle, 1Liter, Non Refillable 

183-10009 X3 Clean Mini Spray Bottle, 0.27 Oz 

183-10010 X3 Clean Counter Top Foaming Spray Bottle, 8.4 Oz 

183-10112 X3 Clean Mini Spray Counter Box, 0.27 Oz 

183-10014 X3 Clean Travel Size Spray, 2.0 Oz 

183-10020 X3 Clean Mini Spray (Carded in Tray), 0.27 Oz 

183-10070 X3 Clean Empty Refillable Cartridge 

183-10090 X3 Clean Wall Bracket For 1 Liter Counter Top Bottle, White 

183-10094 X3 Clean Clear Holder for 8.5 Oz (#10010) 

Dispensers 

183-10080 X3 Clean Cartridge Wall Dispenser Manual, White 

183-10085 X3 Clean Cartridge Wall Dispenser Touchless, White 

183-10006 183-10085 

183-10090 

N95 Respirator Features 

• Meets all NIOSH standards 

• High filtration efficiency for protection 

in a variety of environments 

• Low breathing resistance and soft 

inner surface for comfort 

• Clear and simple fitting instructions 

make these easy to put on 

• Adjustable outside nosepiece to fit 

most individuals comfortably 

• Secure head straps for a proper fit 

• Some masks have exhalation valves for 

hot and humid work conditions 

270-2000 

N95 Cone Respirator 

270-3000 

N95 Flat Respirator 

270-2050 

N95 Cone Respirator 

with Valve 

270-3050 

N95 Flat Respirator 

with Valve 

Disposable Nuisance Dust Mask 270-1000 

Lightweight and comfortable, this is 

the economical choice for use in 

non-toxic applications such as 

sanding, grinding and cleaning; 

anywhere nuisance dust exists. 


Portable Radio Solutions by: 

Throat Microphone 

• Part Number XTM 1-N4 

• Fully sealed single transducer 

• IP57 waterproof design 

• Adjustable neck strap 

• Interchangeable ear pieces 

Ear Microphone 

• XEM 2-N4 

• Generic design for comfort 

• Ideal for use with respirators 

Fire Service Push-To-Talk 

• Part Number XPTT2 

• Large rubber PTT button 

• Waterproof design 

Bone Conduction Kit Speaker Mic IP67 Rated Speaker Mic Hi-Vis 

• Part Number XHK/BC-N4 

• Fits to any helmet with harness 

• Bone conduction 

microphone 

• Ear phone speaker 

• Easy to fit 

• Can be used with respirators 

• Part Number XSM2 

• Heavy duty fire service mic 

• IP67 rated 

waterproof 

• Heavy duty Kevlar ® 

reinforced cable 

• Part Number STM 

• Hi-vis impact resistant case 

• Replaceable radio 

cable 

• Available for all 

professional 

radios 

Mobile Radio Solutions by: 

XMK-1 Mobile Interface SR50 - Vox Interface XHBH-E Behind Head 

• Remote foot pedal PTT jack 

• Push-to-talk (PTT) in the 

mobile kit housing 

• Interchangeable Mobile 

Radio Cables 

• Headset jack 

• Optional remote 

PTT jack 

- Hand held PTT 

- Steering wheel PTT 

- Velcro Mount PTT 

When push to talk is not an option for your 

mobile radio applications choose the SR50 

VOX interface. made of a solid aluminum 

case. Easy to adjust VOX sensitivity. 

• Exclusive patented PNR audio technology 

• Certified 24Db NRR 

• Universal 5-pin 2-way radio connection 

• Soft touch 1,000,000 cycle sealed PTT 

• Tuned dynamic noise cancelling mic 

• Powerful Neodymium speakers 

• Rugged cables with durable polyurethane 

insulation 

• Spiral shielding reduces RF interference 

• Cloth mic muff protects mic from 

moisture and debris 

XCAM Interface Cables 

• 10431 - Mobile radio extension (3 feet) 

• 10432 - Mobile radio extension (6 feet) 

• P0730 - Remote PTT radio extension 

(3 feet) 

XPTT4 - Dash PTT 

Hole-mount steering wheel or dash mount 

push-to-talk. Threaded black plated brass 

housing, sealed red PTT button and special 

twisted pair urethane coil cord. Cord is 

30 inches uncoiled with industry standard 

3-pin connector. 

18 


RUBBER INSULATING GLOVES 

Class Length Color Style # 

00 11” Black 160-00-11 

00 11” Yellow 157-00-11 

00 14” Black 160-00-14 

00 14” Yellow 157-00-14 

0 11” Black 160-0-11 

0 11” Yellow 157-0-11 

0 14” Black 160-0-14 

0 14” Yellow 157-1-14 

1 14” Black 160-1-14 

1 14” Yellow 157-1-14 

1 16” Black 160-1-16 

1 16” Yellow 157-1-16 

2 14” Black 160-2-14 

2 14” Yellow 157-2-14 

2 16” Black 160-2-16 

2 16” Yellow 157-2-16 

When Marigold rubber insulating 

gloves are used in good condition 

and within the specified voltage 

limits, they will provide you the 

protection required to complete 

your job safely. 

Determine the maximum voltage 

that you will be exposed to during 

your work prior to choosing the 

appropriate class of glove. 

Class 00 - 2 sizes available 7 - 12 

Leather Protectors (Cover Glove) 

Description Class Sizes Style # 

10” Goatskin Driver Cuff Class 00 - 0 7-12 148-1000 

13” Goatskin Gauntlet Cuff Class 00 - 0 7-12 148-2000 

12” Cowhide Gauntlet Cuff Class 1 - 2 7-12 148-4000 



Leather Protectors are to be used only for mechanical protection for rubber insulating 

gloves and mittens and shall not be used for electrical protection per ASTM F696-02. 

The correct length of leather protectors is found in ASTM F496-06. 

Rubber insulating gloves and leather protectors should 

always be worn when performing extrication work on electric cars. 

Storage Bags 

(For Rubber Insulating Gloves) 

Description Size Color Style # 

Canvas Glove bag 11” Natural 148-M69002 




Yellow class 00 rubber insulating gloves shown 

with 10” goatskin driver cuff, leather protectors. 


26 Computer Drive East • Albany • NY 12205 

518.861.0133 (ph) • 866.825.2124 (toll free) • 518.861.0144 (fx) 

alliancefireandrescue.com (web) • sales@alliancefireandrescue.com (e-mail) 

6 16314 02993 6 

$1.95 

2-2010 / 5,000 

© 2010 Protective Industrial Products, Inc.

AFR Catalog (PDF) - Alliance Fire and Rescue Inc.

Create successful ePaper yourself

Delete template?

Save as template?