Main catalogue - Athena Building

Cold water high-pressure cleaner
High-pressure cleaners
the rotation of an inclined wobble plate
(advancement) and springs (return). The
coaxial to the motor rotation axle. Simple manufacture, there
are few moving elements.
a system of connecting rods and crankshaft. The
longitudinal axle of the pistons (placed at the
same level or linear) is perpendicular to the motor rotation axle.
and it has a better self priming.
motor, this allows a better thermal exchange
(and so a cooling) than air also in those
a drop in operating temperature of the motor and pump
mechanical elements, granting a better reliability and longer
life.
When the gun trigger is released, the same
water flows through the pump (by-pass) and it overheats
and sooner or later this damages the valve seals. With this
completely mechanical system, the thermal valve checks the
letting new and fresh water flow inside before the elements are
damaged. Simple solution without electronic devices.
Releasing the gun trigger the pump stops
automatically avoiding element damages during the by-pass
phase. Pulling the trigger, the high-pressure cleaner starts
To avoid quick and multiple start and shut down
seconds the machine shut down. Prevention, energy saving, top
safety and pump longer life.
The electric motor transfers the same number of
revolutions to the pump. With a 4 poles motor
pump life. Extending lifetime solution.
Chemical product (flowing though the pump)are
supplied at the same operating pressure of the
machine. It is possible to spread detergent on
areas far from the user.
Chemical product (that is not flowing though the
pump, but is vacuumed with a VENTURI effect) are
supplied lowering the operating pressure of the
machine. It is possible to supply detergent with a wide conic jet
on areas near to the user.
The machine has an integrated detergent tank. It
is not necessary to have other external tanks that
reduce movements.
The machine has two integrated detergent tanks,
to supply two different chemical products with a
double selector. It is not necessary to empty the
tank if another chemical product is needed. It is not necessary
to have other external tanks that reduce movements.
The release of the gun trigger produces a
strong counterstroke in the pump. This device
amortizes this power with great benefit for the
pump components and for the user, because it removes all the
vibrations.
Endothermic motor has a high rotation speed
is applied to lower the rotation of the connected
pump. Low rotation speed of the components grant longer
pump life.
It allows the visual control of the machine
operating pressure.
It is possible to lower the pressure for gentle uses
and for water saving.
7