Chassis Booster 10-11 lr - EUPHORIA TECHNOLOGY

What if your car had:
• Boosted safety levels
• Boosted road handling
• Boosted chassis
structural strength
• Boosted stability during
manuvering, braking,
accelerating and
cornering
• Less cabin noise
…......... all while pushing
your car's performance to
it's limit!
Chassis Booster
Boosts your driving experience
Chassis Booster CB is one of the Protonic Car Boosters
that boost the strength and stability in the automobile’s
chassis system by aligning the metals and polymer
particles while simultaneously reducing mechanical
vibrations. The Chassis Booster CB devices are placed
strategically inside the main compartment of the car to
emit the PVA field ( Proton Vibration Alignment)
throughout the chassis system. This significantly
improves the driving experience. The Chassis Booster CB
will save you money. All this is made possible only
through IPC’s proprietary Euphoria Technology. For
details see the backside and the video on the website.
Key Product Features
• Simple do-it-yourself installation - no modifications are required.
• No maintenance is necessary within the warranty period.
• Stable performance throughout the designated operational period.
• No adverse effect on other components or computer systems.
• No magnetic field emissions. No electromagnetic waves.
• No radiation. No toxic or corrosive substances.
How does it work
When the car is underway, the metal and polymer components that
make up the chassis (approximately twenty thousand parts inside the
chassis) are vibrating and moving radomly. They form the basic
strength of the chassis system.
The PVA Field (Proton Vibration Alignment) produced by the Chassis
Boosters CB aligns the protons in the metals and polymers of the
chassis system to boost the strength in the structures. Consequently
the chassis can better resist the stresses of cornering, acceleration,
and equally importantly, the braking. Noise in the passenger cabin is
also reduced.

Energy
Saving
Installation
We recommend that you place three Chassis
Boosters CB inside the car:
1) Put two CB’s in the left and right door pockets
and one CB to the rear, for example, in the
trunk to form a triangle inside the car.
or
One may use cable ties to fix the CB's in their
locations or simply have them stuck in a
location where they can not move.
2) Put one CB in front under the dasboard
and two CBs in the rear, for example, in the left
and right back door pockets to form a triangle
inside the car.
Euphoria Technology
• IPC’ s proprietary Euphoria Technology is implemented in all IPC products to generate a prescribed and stable
Proton Vibration Alignment Field (PVA Field).
• The PVA Field created by Euphoria Technology has the ability to align protons and their opposite charged
electrons in all matter, fundamentally enhancing their physical properties. This realignment procedure can be used to
enhance many processes in electrical and electronic applications.
• Euphoria Technology is based on quantum mechanics operating on the scale of picometers, i.e., picotechnology.
Picotechnology refers to the manipulation of matter on the scale of trillionths of a meter (10 -12 ) and is much more
advanced than traditional nano technology.
• Euphoria Technology was invented by IPC and has successfully been applied to several automotive products as
well as to many other products.
Components needed
3 Chassis Boosters CB are needed for each car. No other products are needed.
Specifications
Operating
Temperature
Operating
Temperature
Effective
Period
Effective
Period
Dimensions Weight Components
Safety Remarks
(L x W x D)
Warranty Dimensions Weight Components
Safety Remarks
Period (L x W x D)
from plus 20˚C
through plus 70˚C
from plus 68˚ F
through plus 158˚ F
4 years
4 years
75 x 48 x 29 mm
2.95" x 1.8" x 1.14"
84 grams
2.96 ounces
ABS plastic, silicon,
copper, phosphorus,
polycarbonate, steel,
polypropylene, quartz,
alkaline battery, paper,
silicon oxide, carbon,
fiber glass, aluminium,
special alloy
Does NOT contain
any materials that are
radioactive, toxic or
corrosive.
Innoworks Product Creation Ltd.
Suite 2203, Kowloon Building, 555 Nathan Road, Mongkok, Kowloon, Hong Kong
T + 852 - 3525 1496 F + 852 - 3525 1498
cs@innoworkspc.com www.innoworkspc.com Authorized Dealer
10/11