MATERIAL SAFETY DATA SHEET - Myfarmstore.co.nz
MATERIAL SAFETY DATA SHEET - Myfarmstore.co.nz
MATERIAL SAFETY DATA SHEET - Myfarmstore.co.nz
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Panacur 100 – Issue 2<br />
4.3 Fire / Exposure Hazards<br />
4.35 Thermal De<strong>co</strong>mposition: No hazards known<br />
4.36 Hazardous De<strong>co</strong>mposition<br />
Products:<br />
No hazards known<br />
4.37 Hazardous Reactions: None known<br />
4.38 Extinguishing Media: Water, foam or dry chemical<br />
5. OTHER INFORMATION<br />
5.10 Information on E<strong>co</strong>logical Effects:<br />
Flora:<br />
No effects anticipated<br />
Fauna ( rat ):<br />
Oral LD 50 = >1000mg/kg<br />
Fish:<br />
No effects anticipated<br />
Birds:<br />
No effects anticipated<br />
Soil:<br />
No effects anticipated<br />
Water:<br />
Do not allow product to enter waste water, rivers or creeks.<br />
6. CONTACT POINT (For Non-Emergency Calls)<br />
6.10 Product Safety Coordinator: John Southworth<br />
R & D Manager<br />
Intervet Limited<br />
09-309-0600<br />
DISCLAIMER<br />
The Material Safety Data Sheet has been developed ac<strong>co</strong>rding to OSH guidelines.<br />
The data, information and re<strong>co</strong>mmendations herein (“information”) are represented in good faith and believed to be<br />
<strong>co</strong>rrect as of the date hereof.<br />
The purpose of this Material Safety Data Sheet is to describe product in terms of their safety requirements.<br />
Intervet Ltd makes no representation of merchantability, fitness for a particular purpose or application, or of any other<br />
nature with respect to the information or the product to which the information refers (“the product”).<br />
The information is supplied upon the <strong>co</strong>ndition that the persons receiving same will make their own determination as<br />
to its suitability for their purposes prior to use of the product.<br />
The physical data shown herein are typical values based on material tested. These values should not be <strong>co</strong>nstrued<br />
as a guaranteed analysis of any specific lot or as guaranteed specification for the product or specific lots thereof.<br />
Due care should be taken to make sure that the use or disposal of this product is in <strong>co</strong>mpliance with relevant Local<br />
Government regulations.<br />
Page 4 of 4