*TM 10-7310-281-13&P - JATONKAM35s HOME ON THE WEB

More documents

Recommendations

Info

TM 10-7310-281-13&P GENERAL SAFETY WARNINGS DESCRIPTION – CONTINUED WARNING During operation, the MBU produces harmful carbon monoxide (CO) and other gases. Carbon monoxide is a colorless, odorless, and tasteless gas. Mild cases of carbon monoxide poisoning can cause symptoms such as nausea, dizziness, or headaches. Severe cases of carbon monoxide poisoning can result in brain damage, heart damage, or death. Although CO has no telltale odor, it may mix with other odors which mask its presence; therefore, CO can be present within a mix of seemingly harmless odors. To prevent CO poisoning, ensure that the MBU operating space is well ventilated during burner operation. Under no circumstances should an MBU be operated in any enclosure with all vents closed. WARNING For immediate decontaminating procedures, use ONLY hot, soapy water for spot decontamination of hot surfaces of the MBU. Shut down and cool the MBU for any additional decontamination procedures. DO NOT spray DS2 or any other combustible decontamination solutions or compounds on an operating MBU. DO NOT spray DS2 or any other combustible decontamination solutions or compounds on any equipment surfaces or components where the operating temperatures reach or exceed the flashpoint of DS2 (160 o Fahrenheit or 71.1 o Celsius). WARNING Have rags on hand to clean up fuel spillage that may occur, to prevent contamination. Do not perform this procedure near an open flame to prevent fire. Failure to observe safety precautions may result in injury or death to personnel. WARNING Fuel is toxic and highly flammable. Wear protective gloves and be sure to wipe up any spills with rags. Dispose of rags in accordance with Unit SOP and local environmental regulations. Avoid contact with skin, eyes, and clothes and don’t breathe vapors. Failure to observe this warning may cause injury or death to personnel. d
TM 10-7310-281-13&P GENERAL SAFETY WARNINGS DESCRIPTION – CONTINUED WARNING Do not perform this procedure near an open flame, to prevent fire. Failure to observe safety precautions may result in injury or death to personnel. WARNING Before proceeding with this procedure, the MBU fuel tank must be drained completely as described in WP 0014. Have rags on hand to clean up fuel spillage that may occur, to prevent contamination. Do not perform this procedure near an open flame, to prevent fire. Failure to observe safety precautions may result in injury or death to personnel. WARNING Before proceeding, the batteries must be removed from the battery pack. Failure to observe safety precautions may result in injury or death to personnel. WARNING Batteries may explode if connected incorrectly. Red power lead MUST be connected to positive (+) terminal of battery. Black power lead MUST be connected to negative (-) terminal of battery. WARNING HIGH VOLTAGE is used in the operation of this equipment. Ensure power is disconnected before attempting this maintenance procedure. DEATH ON CONTACT may result if personnel fail to observe safety precautions. e/f blank
Page 1: *TM 10-7310-281-13&P TECHNICAL MANU
Page 4 and 5: GENERAL SAFETY WARNINGS DESCRIPTION
Page 9 and 10: LIST OF EFFECTIVE PAGES/WORK PACKAG
Page 11 and 12: *TM 10-7310-281-13&P TECHNICAL MANU
Page 13 and 14: TM 10-7310-281-13&P TABLE OF CONTEN
Page 21: TM 10-7310-281-13&P REAR MATTER. Re
Page 25 and 26: TM 10-7310-281-13&P 0001 OPERATOR A
Page 27 and 28: DESTRUCTION OF ARMY MATERIEL TO PRE
Page 29 and 30: PREPARATION FOR STORAGE OR SHIPMENT
Page 31: TM 10-7310-281-13&P 0001 Table 2. L
Page 34 and 35: LOCATION AND DESCRIPTION OF MAJOR C
Page 36 and 37: TM 10-7310-281-13&P 0002 LOCATION A
Page 38 and 39: TM 10-7310-281-13&P 0002 LOCATION A
Page 40 and 41: TM 10-7310-281-13&P 0002 EQUIPMENT
Page 42 and 43: TM 10-7310-281-13&P 0003 • Low fu
Page 44 and 45: MBU Power Configuration for 110VAC
Page 47: TM 10-7310-281-13&P CHAPTER 2 OPERA
Page 50 and 51: TM 10-7310-281-13&P 0004 5 6 1 7 2
Page 52 and 53: TM 10-7310-281-13&P 0004 4 5 7 1 6
Page 54 and 55: TM 10-7310-281-13&P 0005 ASSEMBLY A
Page 56 and 57:
ASSEMBLY AND PREPARATION FOR USE -
Page 58 and 59:
Page 60 and 61:
Page 62 and 63:
Page 64 and 65:
Page 66 and 67:
TM 10-7310-281-13&P 0005 ASSEMBLY A
Page 68 and 69:
TM 10-7310-281-13&P 0005 OPERATING
Page 70 and 71:
OPERATING PROCEDURES - CONTINUED Po
Page 72 and 73:
OPERATING PROCEDURES - CONTINUED Ma
Page 74 and 75:
OPERATING PROCEDURES - CONTINUED TM
Page 76 and 77:
TM 10-7310-281-13&P 0005 Table 1. M
Page 78 and 79:
DECALS AND INSTRUCTION PLATES - CON
Page 80 and 81:
TM 10-7310-281-13&P 0005 OPERATING
Page 83 and 84:
TM 10-7310-281-13&P 0006 OPERATOR A
Page 85:
TM 10-7310-281-13&P CHAPTER 3 OPERA
Page 89:
TM 10-7310-281-13&P 0008 OPERATOR M
Page 92 and 93:
TROUBLESHOOTING PROCEDURE - CONTINU
Page 94 and 95:
Page 96 and 97:
Page 98 and 99:
Page 100 and 101:
Page 103:
TM 10-7310-281-13&P CHAPTER 4 OPERA
Page 106 and 107:
TM 10-7310-281-13&P 0012 PMCS PROCE
Page 108 and 109:
TM 10-7310-281-13&P 0013 Table 1. P
Page 110 and 111:
TM 10-7310-281-13&P 0013 Table 1. P
Page 112 and 113:
TM 10-7310-281-13&P 0013 Table 1. P
Page 114 and 115:
TM 10-7310-281-13&P 0013 Table 1. P
Page 116 and 117:
TM 10-7310-281-13&P 0013 Item No. P
Page 118 and 119:
TM 10-7310-281-13&P 0014 SERVICE -
Page 120 and 121:
TM 10-7310-281-13&P 0015 INSPECT -
Page 123 and 124:
TM 10-7310-281-13&P 0016 OPERATOR M
Page 125 and 126:
TM 10-7310-281-13&P 0017 OPERATOR M
Page 127 and 128:
TM 10-7310-281-13&P 0017 INSPECT -
Page 129 and 130:
TM 10-7310-281-13&P 0017 CALIBRATE
Page 131 and 132:
TM 10-7310-281-13&P 0017 REPLACE -
Page 133 and 134:
TM 10-7310-281-13&P 0018 OPERATOR M
Page 135 and 136:
TM 10-7310-281-13&P 0018 TEST - CON
Page 137 and 138:
TM 10-7310-281-13&P 0018 REPLACE Re
Page 139 and 140:
TM 10-7310-281-13&P 0019 OPERATOR M
Page 141 and 142:
TM 10-7310-281-13&P 0019 TEST Test
Page 143 and 144:
TM 10-7310-281-13&P 0019 TEST - CON
Page 145 and 146:
TM 10-7310-281-13&P 0019 REMOVE/INS
Page 147 and 148:
TM 10-7310-281-13&P 0019 REMOVE/INS
Page 149 and 150:
TM 10-7310-281-13&P 0019 ADJUST - C
Page 151 and 152:
TM 10-7310-281-13&P 0019 ADJUST - C
Page 153 and 154:
TM 10-7310-281-13&P 0019 REPLACE -
Page 155 and 156:
TM 10-7310-281-13&P 0019 REPLACE -
Page 157 and 158:
TM 10-7310-281-13&P 0019 REPLACE -
Page 159 and 160:
TM 10-7310-281-13&P 0019 REPLACE -
Page 161 and 162:
TM 10-7310-281-13&P 0019 REPLACE -
Page 163 and 164:
TM 10-7310-281-13&P 0019 REPLACE -
Page 165 and 166:
TM 10-7310-281-13&P 0019 REPLACE -
Page 167:
TM 10-7310-281-13&P 0019 REPLACE -
Page 170 and 171:
TM 10-7310-281-13&P 0020 REPLACE -
Page 172 and 173:
TM 10-7310-281-13&P 0021 REPLACE -
Page 174 and 175:
TM 10-7310-281-13&P 0022 REPLACE -
Page 176 and 177:
TM 10-7310-281-13&P 0023 TEST WARNI
Page 178 and 179:
TM 10-7310-281-13&P 0023 SERVICE Ch
Page 180 and 181:
TM 10-7310-281-13&P 0023 REPLACE WA
Page 182 and 183:
TM 10-7310-281-13&P 0023 REPLACE -
Page 185 and 186:
TM 10-7310-281-13&P 0024 OPERATOR M
Page 187 and 188:
TM 10-7310-281-13&P 0024 INSPECT -
Page 189 and 190:
TM 10-7310-281-13&P 0024 REPLACE -
Page 191:
TM 10-7310-281-13&P 0024 REPLACE -
Page 194 and 195:
TM 10-7310-281-13&P 0025 INSPECT -
Page 196 and 197:
TM 10-7310-281-13&P 0025 REPLACE Re
Page 199 and 200:
TM 10-7310-281-13&P 0026 OPERATOR M
Page 201 and 202:
TM 10-7310-281-13&P 0027 OPERATOR M
Page 203 and 204:
TM 10-7310-281-13&P 0028 OPERATOR M
Page 205 and 206:
TM 10-7310-281-13&P 0029 OPERATOR M
Page 207 and 208:
TM 10-7310-281-13&P 0030 OPERATOR M
Page 209 and 210:
TM 10-7310-281-13&P 0030 INSPECT -
Page 211:
TM 10-7310-281-13&P 0030 INSPECT -
Page 214 and 215:
TM 10-7310-281-13&P 0031 INSPECT -
Page 217 and 218:
TM 10-7310-281-13&P 0032 OPERATOR M
Page 219 and 220:
TM 10-7310-281-13&P 0033 OPERATOR M
Page 221 and 222:
TM 10-7310-281-13&P 0033 REPLACE Re
Page 223 and 224:
TM 10-7310-281-13&P 0034 OPERATOR M
Page 225:
TM 10-7310-281-13&P CHAPTER 5 FIELD
Page 228 and 229:
TM 10-7310-281-13&P 0035 INSTALLATI
Page 230 and 231:
INSTALLATION INSTRUCTIONS - CONTINU
Page 232 and 233:
INSTALLATION INSTRUCTIONS - CONTINU
Page 234 and 235:
TM 10-7310-281-13&P 0036 REPAIR - C
Page 236 and 237:
TM 10-7310-281-13&P 0037 REPLACE -
Page 238 and 239:
TM 10-7310-281-13&P 0038 REPLACE Re
Page 240 and 241:
TM 10-7310-281-13&P 0039 REPLACE -
Page 243 and 244:
TM 10-7310-281-13&P 0040 FIELD MAIN
Page 245:
TM 10-7310-281-13&P 0040 REPLACE -
Page 248 and 249:
TM 10-7310-281-13&P 0041 TEST - CON
Page 250 and 251:
TM 10-7310-281-13&P 0041 TEST - CON
Page 252 and 253:
TM 10-7310-281-13&P 0041 REPLACE -
Page 254 and 255:
TM 10-7310-281-13&P 0041 REPLACE -
Page 256 and 257:
TM 10-7310-281-13&P 0041 REPLACE -
Page 258 and 259:
TM 10-7310-281-13&P 0041 REPLACE -
Page 260 and 261:
TM 10-7310-281-13&P 0042 REPLACE Re
Page 262 and 263:
TM 10-7310-281-13&P 0043 TEST - CON
Page 264 and 265:
TM 10-7310-281-13&P 0043 REPLACE -
Page 266 and 267:
TM 10-7310-281-13&P 0044 TEST - CON
Page 268 and 269:
TM 10-7310-281-13&P 0044 REPLACE -
Page 270 and 271:
TM 10-7310-281-13&P 0045 TEST - CON
Page 273:
TM 10-7310-281-13&P CHAPTER 6 PARTS
Page 276 and 277:
TM 10-7310-281-13&P 0046 Source Cod
Page 278 and 279:
TM 10-7310-281-13&P 0046 Recoverabi
Page 280 and 281:
TM 10-7310-281-13&P 0046 HOW TO LOC
Page 282 and 283:
TM 10-7310-281-13&P 0047 6 4 5 NOTE
Page 285 and 286:
TM 10-7310-281-13&P 0048 OPERATOR A
Page 287:
TM 10-7310-281-13&P 0048 (1) (2) (3
Page 290 and 291:
TM 10-7310-281-13&P 0049 1 2 THRU 5
Page 293 and 294:
TM 10-7310-281-13&P 0050 OPERATOR A
Page 295:
TM 10-7310-281-13&P 0050 (1) (2) (3
Page 298 and 299:
TM 10-7310-281-13&P 0051 25 30 26 T
Page 300 and 301:
TM 10-7310-281-13&P 0051 (1) (2) (3
Page 302 and 303:
TM 10-7310-281-13&P 0052 1 2 THRU 4
Page 305 and 306:
TM 10-7310-281-13&P 0053 OPERATOR A
Page 307:
TM 10-7310-281-13&P 0053 (1) (2) (3
Page 310 and 311:
TM 10-7310-281-13&P 0054 1 2 THRU 1
Page 313 and 314:
TM 10-7310-281-13&P 0055 OPERATOR A
Page 315:
TM 10-7310-281-13&P 0055 (1) (2) (3
Page 318 and 319:
TM 10-7310-281-13&P 0056 1 2 Figure
Page 321 and 322:
TM 10-7310-281-13&P 0057 OPERATOR A
Page 323:
TM 10-7310-281-13&P 0057 (1) (2) (3
Page 326 and 327:
TM 10-7310-281-13&P 0058 1 14 2 THR
Page 329 and 330:
TM 10-7310-281-13&P 0059 OPERATOR A
Page 331:
TM 10-7310-281-13&P 0059 (1) (2) (3
Page 334 and 335:
TM 10-7310-281-13&P 0060 1 2 THRU 4
Page 337 and 338:
TM 10-7310-281-13&P 0061 OPERATOR A
Page 339:
TM 10-7310-281-13&P 0061 (1) (2) (3
Page 342 and 343:
TM 10-7310-281-13&P 0062 1 2 Figure
Page 345:
TM 10-7310-281-13&P 0063 OPERATOR A
Page 349 and 350:
TM 10-7310-281-13&P 0065 OPERATOR A
Page 351 and 352:
TM 10-7310-281-13&P 0066 OPERATOR A
Page 353:
TM 10-7310-281-13&P CHAPTER 7 SUPPO
Page 356 and 357:
TM 10-7310-281-13&P 0067 REFERENCES
Page 359 and 360:
TM 10-7310-281-13&P 0068 OPERATOR A
Page 361 and 362:
TM 10-7310-281-13&P 0068 NOTE The f
Page 363 and 364:
TM 10-7310-281-13&P 0069 OPERATOR A
Page 365:
TM 10-7310-281-13&P 0069 Table 1. M
Page 368 and 369:
TM 10-7310-281-13&P 0070 1 2 Table
Page 371 and 372:
TM 10-7310-281-13&P 0071 OPERATOR A
Page 373:
TM 10-7310-281-13&P 0071 Table 1. A
Page 376 and 377:
TM 10-7310-281-13&P 0072 Table 1. E
Page 379:
TM 10-7310-281-13&P 0074 OPERATOR A
Page 382 and 383:
TM 10-7310-281-13&P Subject WP Sequ
Page 384 and 385:
Page 386 and 387:
Page 389 and 390:
RECOMMENDED CHANGES TO PUBLICATIONS
Page 391 and 392:
Page 393 and 394:
Page 395 and 396:
Page 397:
TM 10-7310-281-13&P By Order of the
Page 400:
PIN: 077378-000
show all

*TM 10-7310-281-13&P - JATONKAM35s HOME ON THE WEB

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?