DICOM Conformance Statement

More documents

Recommendations

Info

DICOM Conformance Statement for Cerner ProVision TM PACS Release 4.5 4.4.1 Standard extended/specialized/private SOPs Not applicable. 4.4.2 Private Transfer Syntaxes Not applicable. 4.5 Configuration By default the dicom server uses an configuration file, which by default sets the values described in the following sections. This chapter contains some DICOM specific aspects of the configuration process of the dicom server. 4.5.1 AE Title/Presentation Address Mapping 4.5.1.1 Local AE Titles The local AE Titles and corresponding TCP ports can be configured. Application Entity Default AE Title Default TCP/IP Port Dicom server OWN_AET 4444 Table 32: AE Title Configuration 4.5.1.2 Remote AE Titles Remote AE Titles, TCP/IP Addresses and ports are configurable through the configuration file. Leave this entry empty to load the trusted nodes from the database. 4.5.2 Parameters The following parameters relevant to DICOM communication may be configured for the dicom server: Parameter Configurable (Yes/No) Default Value Dicom Server Listening Port Yes 4444 Maximum number of simultaneous Associations (Max-clients) Yes 50 Request timeout Yes 5000 DIMSE timeout Yes 86400000 So close delay Yes 500 Maximum PDU size the AE can receive Yes 16352 Maximum op invoked Yes 0 Accepted Called AETs Yes OWN_AET Accepted Calling AETs Yes loaded from database Cerner Corporation February 27, 2007 Page 34
DICOM Conformance Statement for Cerner ProVision TM PACS Release 4.5 Audit host Yes localhost port Yes 5151 facility Yes local5 Table 33: Configuration Parameters Cerner Corporation February 27, 2007 Page 35
Page 1 and 2: DICOM Conformance Statement for Cer
Page 7 and 8: 3 Introduction DICOM Conformance St
Page 9 and 10: 4 Networking DICOM Conformance Stat
Page 13 and 14: 4.2.4 Storage SCP DICOM Conformance
Page 33: 4.2.9 MPPS SCP DICOM Conformance St

DICOM Conformance Statement

Create successful ePaper yourself

Delete template?

Save as template?