PORTABLE WIRELESS AMPLIFIER WITH USB/SD ... - Total Sonic

More documents

Recommendations

Info

Contents 6. Technical Specification 1) TRamp-US Panel 2) Operating Instructions 3) Battery Operation & Recharging 4) Important Notes 5) Warranty Information 6) Technical Specification Amplifier Specification Power Output RMS50-Watt No. of Mic Input 1 x Wired Microphone by combination jack 1 x UHF Wireless Microphone (Other frequencies are option) Volume Control 1 x Wired Microphone 1 x Wireless Microphone 1 x Aux Tone Control Voice-over 1 x Treble / 1 x Bass, ±12dB Independent Adjustable 0 ~ 100%/0 ~ max. 1.5sec Digital Echo CMOS 44K memory / Delay time: 31ms ~ 340ms Aux. Input/Output 1 x In-RCA / 1 x Out-RCA with Volume control Speaker 6.5” Dynamic Full range + 2.5” Tweeter External Speaker >16Ω Built-In Battery 12V/3AH, Rechargeable & Sealed Battery Charging Approx. 8 - 10hours for a Single charge Discharge Protection 10.6V (Factory set: Lowest voltage for ABMR) AC/DC Adapter (SMPS) AC100-240V 50-60Hz / DC15V/2A UL/CE/CSA/TÜV Weight Approx. 8Kg-Nett Dimensions 270mm(L) x 205mm(W) x 245mm(H) Nett Wireless System Specification Carrier Frequency UHF 863-865MHz (Other frequencies are optional) Pre-set Frequency 16-Ch Selectable Frequencies Frequency Stability ±0.005% Modulation PLL Synthesized Frequency Response 50Hz – 15khz ±2dB Max. Distortion ≥0.3% at 1kHz, 15kHz DAV Dynamic Range More than 90dB RF Transmitter Power 10mW (Can be adjusted basing on regulation) Max. SPL 110dB SPL Receiving Method F3E S/N (15kHz DAV 100µV) More than 90dB USB/SD-Card Player Specification USB Player Support MP3-USB with USB2.0 Function Mode, Folder +10 / -10 , F / B ward, Volume External Memory Unlimited
3. Battery Operation & Recharging Automatic Battery Monitoring & Recovery System (ABMR) The main amplifier is equipped with an auto battery monitoring and recovery system. This continuously monitors the battery and will automatically turn-off the amplifier completely if the voltage drops to a dangerous level, which might harm the battery. The system can instantly recover by switching on the supplied AC/DC adapter. When the low-battery LED illuminates, the built-in battery needs to be charged immediately. Plug in the AC/DC adapter to input jack on the front panel. The charge LED will illuminate and will automatically turn off when the charging completed in approx. 10h. Continue to charge some extra hours to ensure battery fully charged. 1. - US Panel 4. Important Notes - The impendance of the external speaker should be greater than 16Ω. - Do not use an AC/DC adapter other than that supplied otherwise guarantee void. - Please do not use a fuse other than the specified rated one of 250V/5A. - Charging should be done at regular intervals to conpensate for natural discharging. 5. Warranty information DTC Audio hereby warrants that this product will be free from defects in material and workmanship for a period of one year from the date of purchase. At our option, we will repair or replace the defective product and promptly return it to you. You should retain proof of purchase to validate the purchase date and return it with any warranty claim. If you believe this product is defective within the warranty period, carefully repack the unit, insure it, and return it freight prepaid to your nearest dealer or authorized service center or direct to us. This warranty does not apply in case of abuse of the product use contrary to our instructions, or unauthorized repair. All implied WARRANTIES of MERCHANTABILITY of FITTNESS FOR A PARTICULAR PURPOSE are disclaimed and we hereby disclaim liability for incidental, special or consequential damages resulting from the use or unavailability of this product. THIS WARRANTY SUPERSEDES ALL WARRANTIES THAT ARE INCLUDED WITH THIS PRODUCT. Memo MODE LCD Display Power LED Volume for USB/SD-Card 16-Ch Frequency Selector Switch Wireless Ant Aux. Volume Volume for Wired Mic Aux In/Out Jack Volume for CD Player Wired Mic 1/4” Jack Battery Charging LED Wireless Mic 2 Volume (Option) Battery Monitor LED Ext. Speaker Jack (16Ω) VOL POWER USB / SD-CARD PLAYER MODE -10 +10 FOL FR FF CHARGE US BATTERY MONITOR USB/SD POWER FUSE +10 -10 USB/SD-Card Slot Back skip /Fast Reverse Forward skip /Fast Forward Folder a search Wireless Ant 2nd 16-Ch Freq. Selector(Option) Power On/Off Switch Volume for Wireless Mic 1 Bass/Treble Tone Control Echo Voice Priority Fuse Power LED AC/DC Adapter Input jack NOTE: The information contained in this manual is believed to be correct at the time of going to press. However, DTC Audio reserves the right to change or modify the specification without notice or obligation to update existing units
Page 1: ETS LOGISTICS BV Parellaan 28, 2132

PORTABLE WIRELESS AMPLIFIER WITH USB/SD ... - Total Sonic

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?