Untitled - CTR Scientific

Single Tube Holder
Mounts to the top of vortex mixers for single tube, hands
free mixing. Easily attaches to the top of any vortex mixer
without the use of tools. Patent Pending.
Single Tube Holder
Adapter for Vortex-Genie® mixer*
**.5ml micro-tube holder
**1.5ml - 2.0ml tube hoder
02-215-404
02-215-405
02-215-402
02-215-403
* The Vortex-Genie® mixer is a registered trademark of
Scientific Industries, Inc.
** For use with Single Tube Holder
$92.45
$52.83
$50.38
$51.90
Accessories
Micro-tube Holder
Mixes forty-eight, 2.0-.25ml microcentrifuge tubes.
,,,- Requires insert retainer.
Micro-tube Holder (2 pk)
Insert Retainer
02-215-386
02-215-391
Micro-well Plate Holder
Ideal for mixing 96 well plates or deep well blocks.
Requires insert retainer.
$39.45
$83.01
Accessory
Kits
Micro-well Plate Holder (2 pk) 02-215-387 $39.44
Insert Retainer 02-215-391 $83.01
Tube Holder Kit with Retainer
Includes: (1) holder for 9-13mm tubes
(1) holder for 14-19mm tubes
(1) holder for 20-25mm tubes
(1) flat foam insert
(2) vessel harness
(1) insert retainer
20-25mm Tube Holder
Ideal for mixing up to eight, 50ml centrifuge rubes.
Requires insert retainer.
Tube Holder (2 pk)
02-215-395 $17.65
Insert Retainer
02-215-391 $83.01
Tube Holder Kit with Retainer
02-215-388 $119.33
Micro-tube and Micro-well Plate Holder Kit with Retainer
Includes: (ll micro-tube holder
(1) micro-well plate holder
(1) insert retainer
14-19mm Tube Holder
Idea for mixing up to eight, 15ml centrifuge tubes.
Requires insert retainer.
Tube Holder (2 pkl
Insert Retainer
02-215-394
02-215-391
$17.65
$83.01
Micro-tube and Micro-well Plate 02-215-384 $68.49
Holder Kit with Retainer
9-13mm Tube Holder
Ideal for mixing .5ml culture tubes and micro vials.
Requires insert retainer.
Replacement Parts Tube Holder (2 pkl
Insert Retainer
02-215-393
02-215-391
$17.65
$83.01
Insert Retainer
Vessel harness (2 pkl
Holder for 9-13mm tubes (2 pkl
Holder for 14-19mm tubes (2 pk)
02-215-391
02-215-392
02-215-393
02-215-394
$83.01
$5.20
$17.65
$17.65
I
Vessel Holder
Mixes Erlenmeyer flasks and media bottles.
Requires insert retainer.
Holder for 20-25mm tubes (2 pk)
Micro-tube holder (2 pk)
Micro-well plate holder (2 pk)
Flat foam insert (2 pk)
Cup Head
3" head (7.6cml
02-215-395
02-215-386
02-215-387
02-215-397
02-215-380
02-215-382
$17.65
$39.45
$39.44
~16.60
$22.83
$22.84
Vessel Harness (2 pk)
Insert Retainer
Ampule Tube Holder
Mixes storage vials and test tubes.
02-215-392
02-215-391
$5.20
$83.01
3" rubber head with cover (7.6cm) 02-215-383
$22.84
1.5ml-2.0ml micro tube holder, stainless steel 02-215-400
$181.61
Ampule holder (15-17mml
Ampule holder (10-17mm)
02-215-398
02-215-399
$77.83
$83.01
NOTE: Fisher vortex mixer accessories are interchangeable with other
manufacturers' models. Call Fisher for assistance.

Specifications and Ordering Information
Overall dimensions (L x W x H):
4.8"W
x 6.8"0 x 4.8"H
(12.2cm x 17.3cm x 12.2cm)
Electrical
(50/60 Hz):
120 volts, 1.2 amps, 150 watts
230 volts, 0.6 amps, 150 watts
Speed range:
Controls:
Ship Weight:
500 to 3000 rpm
3-way power switch, LED display for time/speed,
up/down keys for set-point control
11.7 Ibs (5.3 kg)
Digital Vortex Mixer. 120V
Digital Vortex Mixer, 230V
02-215-370
02-215-371
$363.21
$373.58
Continuous or touch modes
Micro-processor controls
LED display for speed and time
Timer
Fisher Digital Vortex Mixers
Digital Vortex Mixers are ideal for applications
that demand repeatable results. Mixers feature
touch pad controls and LED displays for accurate
speed (rpm) and time (minutes/seconds) results.
Micro-processor feedback control maintains set
speed for strong, consistent mixing action. Timer
will display elapsed time or when programmed to
user defined time limit, the unit will shut off when
the time reaches zero. Choose from two modes of
operation; continuous mode when using accessory
attachments or touch mode which activates
mixing when depressing the cup head.
Digital vortex mixer includes both cup head and
three-inch head with cover
Specifications and Ordering Information
Overall dimensions
(L x W x H):
4.8"W x 6.8"0 x 4.8"H
(12.2cm x 17.3cm x 12.2cm)
Electrical
(50/60 Hz):
120 volts, 1.2 amps, 150 watts
230 volts, 0.6 amps, 150 watts
Speed range:
Controls:
Ship Weight:
500 to 3000 rp m
3-way power switch, LED tdisplay for time/speed
up/down keys for set-point control, pulsing key
11.7 Ibs (5.3 kg)
Pulsing Vortex Mixer, 120V
Pulsing Vortex Mixer, 230V
02-215-375
02-215-376
$486.70
$507.45
Glass bead cell disruption/
homogenization
Continuous or touch modes
LED display for speed and time
Micro-processor controls
Fish'er Pulsing Vortex Mixers
Powerful pulsing vortex action produces excellent
cell disruption for glass bead procedures.
The PulSing Vortex Mixer is capable at complete
cell disruption of samples in only minutes. Unique
pulsing action reduces heat generation while
providing more effective mixing and disruption.
System includes an easy-to-Ioad holder for (12)
1.5ml or 2.oml micro centrifuge tubes. Micro-tube
holder has a built-in cup head which allows
mixer to be used as a standard vortex mixer in
touch mode. Micro-processor feedback control
Illilllllilill~ ~~l W~~U rUI ~lIUIIY,CUII~i~l~lIllliiAiIIY
action. LED displays for both speed (rpm) and
time (minutes/seconds) which provides better
repeatability and accuracy. Displayed time
counts up during continuous operation and
counts down during timed runs.