18.11.2014 Views

Smith's heat emiters - Artizan Heating

Smith's heat emiters - Artizan Heating

Smith's heat emiters - Artizan Heating

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Domestic Applications<br />

Hydroflame TM<br />

Patented<br />

Independent tests* show that fan convectors are at least 24% more energy efficient than a panel radiator in <strong>heat</strong>ing up a room.<br />

*Tests carried out by BSRIA (Building Services Research and Information Association) in August 2008<br />

Room Size Heat Output ∆t 60ºC Heat Output ∆t 50ºC<br />

Guide* Normal Boost Normal Boost Flame-<br />

Model (m 3 ) kW (Btu/h) kW (Btu/h) kW (Btu/h) kW (Btu/h) Trim Colour Effect Only<br />

Hydronic Inset (Classic & Elite) 33 1.5 (5100) 2.0 (6800) 1.2 (4100) 1.6 (5500) Brass or Chrome •<br />

Freestanding (Classic & Elite) 33 1.5 (5100) 2.0 (6800) 1.2 (4100) 1.6 (5500) Brass or Chrome •<br />

Hydronic/ Inset Dual 33 1.5 (5100) 2.0 (6700) 1.2 (4100) 1.6 (5500) Brass or Chrome •<br />

Electronic (Dual) (Classic & Elite) In hydronic mode In hydronic mode In hydronic mode In hydronic mode<br />

1.5 - 1.5 -<br />

In electric mode In electric mode I<br />

Freestanding Dual 33 1.5 (5100) 2.0 (6800) 1.2 (4100) 1.6 (5500) Brass or Chrome •<br />

(Classic & Elite) In hydronic mode In hydronic mode In hydronic mode In hydronic mode<br />

1.5 - 1.5 -<br />

In electric mode<br />

In electric mode<br />

Stove Dual 33 1.5 (5100) 2.0 (6800) 1.2 (4100) 1.6 (5500) Black •<br />

In hydronic mode In hydronic mode In hydronic mode In hydronic mode •<br />

1.0 - 1.0 -<br />

In electric mode<br />

In electric mode<br />

*Room sizes given in cubic metres for general guidance only based on normal <strong>heat</strong> output (∆t 60ºC) for domestic applications only. ∆t 60ºC assumes a mean<br />

water temperature of 80ºC and room temperature of 20ºC. ∆t 50ºC assumes a mean water temperature of 70ºC and room temperature of 20ºC. Hydronic<br />

outputs tested in accordance with BS 4856. Dual models include an electric element which in electric <strong>heat</strong>ing mode will emit 1.5kW (1.0kW for Stove) of <strong>heat</strong>.<br />

Flow Power Consumption Water<br />

& Return Mains Flexible Isolating Fused Normal Boost Capacity<br />

Model Connections Cable Transformer Hoses Valves Spur Watts Watts (Litres)<br />

Hydronic Inset (Classic & Elite) 15mm 2.0m n/a • • 3A 29 36 0.36<br />

Freestanding (Classic & Elite) 15mm 2.0m n/a • • 3A 29 36 0.36<br />

Hydronic/ Inset Dual (Classic & Elite) 15mm 2.0m n/a • • 10A 29 36 0.36<br />

Electric (Dual) In hydronic mode In hydronic mode<br />

1518 1518<br />

In electric mode In electric mode<br />

Freestanding Dual 15mm 2.0m n/a • • 10A 29 36 0.36<br />

(Classic & Elite) In hydronic mode In hydronic mode<br />

1518 1518<br />

In electric mode In electric mode<br />

Stove Dual 15mm 2.0m n/a • • 5A 58 65 0.36<br />

In hydronic mode In hydronic mode<br />

1012 1012<br />

In electric mode In electric mode<br />

Hydroflame TM<br />

Classic & Elite<br />

Connects to and runs from your<br />

central <strong>heat</strong>ing system (hydronic<br />

mode).<br />

Installation<br />

• Inset model designed for a<br />

recess 400mm x 550mm high<br />

• Unit must be earthed<br />

• Suitable for two-pipe central<br />

<strong>heat</strong>ing systems only<br />

Commissioning<br />

Check water temperature is hot<br />

enough to activate low<br />

temperature cut-out device (LTC).<br />

Controls<br />

Two rocker switches:<br />

normal/off/boost, flame-effect<br />

on/flame-effect off.<br />

Variable low temperature cutout<br />

device factory set to energise<br />

fan at approximately 40°C<br />

(104°F). Set temperature can be<br />

adjusted higher or lower during<br />

installation.<br />

Built-in room thermostat.<br />

Hydroflame TM Dual Classic,<br />

Elite & Stove<br />

Connects to and runs from your<br />

central <strong>heat</strong>ing system (hydronic<br />

mode), but also includes an electric<br />

<strong>heat</strong>ing element for use when the<br />

central <strong>heat</strong>ing is switched off.<br />

Installation<br />

• Inset Dual model designed for a<br />

recess 400mm x 550mm high<br />

• Unit must be earthed<br />

• Suitable for two-pipe central<br />

<strong>heat</strong>ing systems only<br />

Accessories<br />

Decorative chimney - Stove Dual<br />

model only.<br />

Commissioning<br />

Check water temperature is hot<br />

enough to activate low temperature<br />

cut-out device (LTC).<br />

Controls<br />

Three rocker switches:<br />

normal/off/boost, hydronic/electric,<br />

flame-effect on/flame-effect off.<br />

Variable low temperature cut-out<br />

device factory set to energise fan at<br />

approximately 40°C (104°F). Set<br />

temperature can be adjusted higher<br />

or lower during installation.<br />

Built-in room thermostat.<br />

Hydroflame running costs<br />

(Models fitted with 11W energy-saving long-life bulb)<br />

Annual Usage<br />

Running Costs<br />

(Hours) (£)<br />

11W Bulb 18W Fan Annual Total<br />

1100 1.82 2.97 4.79<br />

1300 2.15 3.51 5.66<br />

1500 2.48 4.05 6.53<br />

1700 2.81 4.59 7.40<br />

Assumptions<br />

Electricity charged at 15p per kWh. Hydroflame operating<br />

on normal - 1.5kW <strong>heat</strong> output. Excludes use of electric<br />

<strong>heat</strong>ing element.<br />

Hydroflame design options<br />

Model Type<br />

Trim Colour<br />

Brass Chrome<br />

Hydroflame<br />

Inset • •<br />

Inset Dual • •<br />

Freestanding • •<br />

Freestanding Dual • •<br />

Hydroflame Classic<br />

Inset • •<br />

Inset Dual • •<br />

Freestanding • •<br />

Freestanding Dual • •<br />

16

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!