Download Brochure - Haas Automation, Inc.

HRT Super
High Speed
For small to medium parts, Haas boosts productivity through
even shorter cycles times with the HRT210SHS. Nearly six
times faster than the standard HRT210, the HRT210SHS greatly
increases productivity with 360°/sec feedrates. In addition to the
increased speed, the HRT210SHS also features a compact design
like our SP Series.
• Harmonic drive gear design
• Compact enclosure
• Brushless servomotor technology
• Coolant-resistant polyurethane
conduit & seals
• Fast, easy, flexible programming
• Simple CNC interfacing via M code
• Direct connection to Haas machines
• Variable feedrates
• Linear, arc & spiral milling
• Fast setups
• High accuracy & repeatabililty
• 12-month limited warranty
• Made in the USA
HRT Super High Speed Series
Part #
Description
HRT210SHS 210 mm (8.3") Servo Rotary Table w/
Harmonic Gear Drive & Motor in Back
HRT210SHS-HD
SPINDLE
Torque
200 ft-lb 271 Nm
Runout Max
0.0005" 0.013 mm
Speeds
0.001 to 360 °/sec
Tooling 8 std T-slots @ 45°
Center Height 6.000" ±0.001 152.40 mm ±0.03
Max Part Capacity
50 lb 22.7 kg
INDEXING 1
Accuracy
±30 arc-sec
Repeatability
10 arc-sec
Resolution 0.001°
Max Rotation/Step 999.999°
Drive
Harmonic Gear
Specifications and Dimensions
C
L
D
K
12
B
A
0.530" wide x 0.50" deep
13.46 mm wide x 12.7 mm deep
Front & Rear Tie-Down Slots
Minimum Dia. Bolt Circle: 5.65" 143.5 mm
+0.000
-0.001 0.025 mm
0.6245" wide x 0.225" deep
15.872 mm wide x 5.7 mm deep
Locating Key
E
MOTOR
Gear Ratio 50:1
OPERATING SPECIFICATIONS
Duty Cycle full/low speed 50% / 100%
Operating Temp. (max ambient) 100°F 38°C
Power Required (VAC)
115 ±10% @ 15 amps
WEIGHT
Table 165 lb 74.8 kg
Brushless Control 14.2 lb 6.4 kg
H
G
14' 4.3 m
Cable
Dimensions (Inches Millimeters)
A 12.60 320.0
B 4.63 117.6
C 10.64 270.3
D 6.000 ±0.001 152.40 ±0.03
E Ø 2.0000 (±0.0005) x 1.20 deep 50.800 (±0.013) x 30.1 deep
F 12.38 314.5
G 1.75 44.5
H 8.3 210
J 1.57 Wrench Access 39.9
K 4.50 114.3
L 4.25 108.0
1 See page 36.
Due to continual development, all machine specifications are subject to change.
F
J
HRT320FB and HIT210
The Haas HRT320FB rotary table features a highprecision
face gear (Hirth type) that provides superior
indexing accuracy and positioning. The design also
provides extreme rigidity for off-center milling,
drilling, and tapping operations. The platter can
be positioned in 1-degree increments for maximum
precision and repeatability.
SPINDLE
HRT320FB
Torque 500 ft-lb 678 Nm
Runout 0.0005" 0.013 mm
Speeds
0.001 to 80°/sec
Tooling 6 std T-slots @ 60°
Brake Torque @ 100 psi @ 6.9 bar
Pop Out (to index)
3500 ft-lb 4749 Nm
0.075" 1.9 mm
Center Height 9.000" ±0.001 228.6 mm ±0.03
INDEXING 1
Accuracy
Repeatability
Resolution 1.0°
Max Rotation/Step 999°
±3 arc-sec
±1 arc-sec
Worm Gear Diameter 9.40" 238.8 mm
MOTOR
Gear Ratio (worm & gear) 72:1
Timing Belt 2:1
OPERATING SPECIFICATIONS
Operating Temp. (max ambient) 100°F 38°C
Power Required (VAC)
115 ±5% @ 15 A
Max Air Pressure 120 psi 8.3 bar
WEIGHT
Table 450 lb 204.1 kg
Brushless Control 14.2 lb 6.4 kg
13
The Haas HIT-210 is a heavy-duty face-gear indexing
table that offers solid rotary indexing and part
holding for heavy milling with extreme repeatability.
It provides 45° indexing, with an accuracy of ±15
arc-seconds and repeatability of 5 arc-seconds. The
210 mm (8.3") platter holds medium to large parts
weighing up to 300 lb, and a powerful motor turning
a Geneva-star mechanism provides an indexing speed
of 90° per second.
SPINDLE
Torque
Brake Torque
Runout Max
Speeds
PLATTER
HIT210
100 ft-lb 136 Nm
1100 ft-lb @ 100 psi 1 491 Nm @ 6.9 bar
0.001" 0.03 mm
90°/sec
Tooling 6 std T-slots @ 60°
Pilot Bore 3.175" + 0.005, -0 80.65 mm +0.13, -0
Through-Bore
0.875" 22.23 mm
Center Height 6.000" ±0.001 152.40 mm ±0.03
Minimum Dia. Bolt Circle
Pop Out (to index)
MOTOR
Type
Timing Belt
INDEXING
Increment 45°
Accuracy
Repeatability
GENERAL
Base Locating Key
6.00" 152.4 mm
0.210" 5.33 mm
Brush-Type DC Servo
8:1 Geneva Star
±15 arc-sec
5 arc-sec
Operating Temp (max ambient) 100°F 38°C
Air Pressure
Power Required
Weight
0.6245" x 0.225" dp 15.86 mm x 5.7 mm dp
Max 120 psi 8.3 bar
115 VAC ±10% @ 15 amps
150 lb 68 kg
Product dimensions available online at www.HaasCNC.com