LFS | WDK cable trunking systems, plastic - OBO Bettermann

Mounting aid for WDK cable trunking systems
Planning aid, WDK
Shifting of the cover clips
The cover clip can be moved along the entire
length of the cable trunking.
Mounting of partition
The partition is simply locked onto the floor
connector. This guarantees a clear separation
between cables of different voltage levels.
Mounting of hood fittings
The cover fittings can be added easily and with
no visual impairment in areas of cable trunking
in which installations are difficult, such as internal
corners, external corners or T pieces.
Mounting of joint covers
The joint cover is plugged in over the covers
set at a distance. They are fastened in the cover
contour.
Mounting internal corner hood fitting
The hood fitting is placed over the mounted
WDK trunking and locks into the cover contour.
Mounting of external corner hood fitting
The bases of the WDK trunking are mounted
on the wall up to the corner.
Mounting of external corner hood fitting
After the cables have been routed, the external
cable hood fitting is placed on the bases.
Mounting of external corner hood fitting
The covers are cut to size and pushed into the
external corner. This connection ensures a firm
hold of the fitting in the WDK trunking.
Mounting of end piece
The end piece is fastened to the floor connector.
The end piece is placed on the open end of
the WDK trunking.
06 LFS_Katalog_2010_Neuer_Stand / en / 25/02/2010 (LLExport_00995)
Mounting of accessory mounting box
The accessory mounting box is locked onto the
floor connectors.
Mounting of accessory mounting box
Then the accessory mounting box can
be moved along the entire length of the trunking.
Mounting of accessory mounting box
Then the accessory mounting box is fixed to
the WDK trunking using the bolt located in the
base.
LFS
OBO
15