Power Stick Data Sheet - Target Building Materials
Power Stick Data Sheet - Target Building Materials
Power Stick Data Sheet - Target Building Materials
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
1 Product for<br />
ALL Applications<br />
<strong>Power</strong><strong>Stick</strong> vs. The Rest<br />
LIQUID NAILS LATEX SILICONE POLYURETHANE<br />
POWERSTICK AND SIMILAR SEALANTS SEALANTS SEALANTS<br />
Exterior yes no yes yes yes<br />
Interior yes yes yes yes no<br />
Permanently Flexible yes no yes yes yes<br />
High Initial Tack yes yes no no no<br />
No Bracing yes yes no no no<br />
Waterproof yes yes yes yes yes<br />
Mildew Resistant yes no yes yes yes<br />
Paintable yes yes yes no yes<br />
Superior Adhesion yes no no yes yes<br />
Superior UV Resistance yes no yes yes no<br />
Solvent Free yes no yes yes no<br />
Abrasion Resistant yes no no no yes<br />
Wet Surfaces yes yes yes yes no<br />
<strong>Power</strong><strong>Stick</strong> Technical Characteristics<br />
Base<br />
Consistency<br />
Curing System<br />
Skin Formation (*) (20°C/65% R.V.)<br />
Curing Rate (*) (20°C/65% R.V.)<br />
Hardness<br />
Specific Gravity<br />
MS Polymer<br />
Paste<br />
Moisture Cure<br />
5 min.<br />
3 mm/24h<br />
50 ±5 Shore A<br />
1.47 g/ml<br />
Elastic recovery >75 %<br />
Maximum Deformation ±20 %<br />
Temperature Resistance (fully cured)<br />
Elasticity Modulus 100 % (DIN 53504)<br />
Tear Strength (DIN 53504)<br />
Elongation at break (DIN 53504) 500%<br />
Shear Strength<br />
-40°C to +90°C<br />
1.60 N/mm2<br />
3.00 N/mm2<br />
>2N/mm2<br />
Substrate<br />
Thickness<br />
Aluminium<br />
2mm<br />
Shear test velocity10mm/min<br />
(*) these values may vary depending on environmental factors such as temperature, moisture, and type of substrates<br />
7