Polished Versatility - Philips Lighting

Polished Versatility
Philips Pole Series

Innovative solutions,
sustainable performance.
Refined execution
All poles are not created equal. The Philips Pole
Series offers a multitude of styles and options.
Our vast selection of poles are designed and
manufactured for durability, wear, corrosion
resistance, and visual appeal. Our poles are
designed to be safe, effective, economical and lowmaintenance.
We manufacture poles and supports
that meet your specifications and exceed your
expectations. Our poles provide all project owners
from those at Department of Transportations,
utilities, transit authorities and municipalities the
designs necessary for any application.
Durable support
Aluminum poles have many advantages over other
materials. Philips Aluminum Poles are lighter in weight
which provides easier installation and are recyclable
which offers not only a financial return but helps
meet your sustainability goals. Aluminum poles have
a proven longer life than steel which contributes
to a lower life cycle cost. Philips poles also produce
the best breakaway performance and can be easily
removed from accident sites.
2
Philips Pole Series

Contents
Round tapered aluminum poles with
- tapered elliptical arm (TER) series 4 – 5
- twin tapered elliptical arms (TER) series 6 – 7
- tapered truss arm (TRU) series 8 – 9
- twin tapered truss arms (TRU) series 10 – 11
- pipe truss arm (PRE) series 12 – 13
- twin pipe truss arms (PRE) series 14 – 15
- single davit 16 – 17
Round tapered aluminum poles 18 – 19
Round straight aluminum poles 20 – 21
Square straight aluminum poles 22 – 23
Davit arms
- single davit 24
- double davit 25
Brackets - aluminum tapered truss (TRU) series 26
- aluminum pipe truss (PRE) series 27
- aluminum tapered elliptical (TER) series 28
- adjustible arm round (ADJ) series 29
- clamp on arm elliptical (TERC) series 30
- elliptical mounting (TERW) series 31
Transformer bases 32
Anchor bolts 33
Performance benefits of aluminum poles 34

TER series POLES
Arm reach
Round tapered
aluminum poles
with tapered
elliptical arm
Mounting
height
Mounting height 20 to 45 feet
Round, tapered aluminum shaft, heat treated after tapering and welding to
T6 temper. Recommended tapered elliptical bracket (TER series) is
manufactured in 6063T6 aluminum alloy with standard 2 3 / 8 ” O.D. x 6”
long tenon.
Standard features include:
• flush mounted, internally reinforced hand hole
270º
bracket
Orientation
180º
0º
hand hole
90º
bracket
• ground lug
• cast aluminum anchor base (alloy 356T6) welded externally and internally
to shaft
• removable spun aluminum top cap comes with stainless steel set screws
• G40.21 50W steel anchor bolts with 50,000 PSI yield strength, minimum 12”
hot dipped galvanized coating, complete with hex nuts, flat washers and
nut covers
• rotary sanded or thermoset polyester powder coated
• direct burial poles are provided with a 2”x 9” wiring slot 24” below grade.
Shaft below grade is powder coated inside and out, and wrapped with rubber.
Catalog Number Explanation
Example: USS6040B19-TER4 =
60 40 B 19 TER4
Shaft diameter Shaft diameter Wall thickness Pole height Arm type
Pole options
at base
at top
(inches)
(feet)
60 = 6.0” 40 = 4.0” B = .156 17 – 19 TER4 = Tapered elliptical arm, 4 foot reach DE = direct bury
70 = 7.0” 50 = 5.0” C = .188 22 – 24 TER6 = Tapered elliptical arm, 6 foot reach Cast aluminum base is a standard option
80 = 8.0” 60 = 6.0” D = .250 27 – 29 TER8 = Tapered elliptical arm, 8 foot reach
10 = 10.0” 32 – 34
37 – 39
42 – 43
4
Philips Pole Series

Catalog Number
Mounting
height
(feet)
Arm Reach
(feet)
80
MPH
90
MPH
100 MPH 110 MPH
Anchor
Bolts
(inches)
Bolt
Circle
(inches)
Approx.
Weight
(pounds)
20 foot Mounting height
USS6040B19-TER4 20 4 1.8 1.8 1.8 1.4 1” x 36” 9” to 10” 76
USS6040C19-TER4 20 4 1.8 1.8 1.8 1.8 1” x 36” 9” to 10” 89
USS6040B18-TER6 20 6 1.8 1.8 1.8 1.2 1” x 36” 9” to 10” 79
USS6040C18-TER6 20 6 1.8 1.8 1.8 1.8 1” x 36” 9” to 10” 94
USS6040B17-TER8 20 8 1.8 1.8 1.5 – 1” x 36” 9” to 10” 80
USS6040C17-TER8 20 8 1.8 1.8 1.8 1.8 1” x 36” 9” to 10” 90
25 foot Mounting height
USS7040C24-TER4 25 4 1.8 1.8 1.8 1.8 1” x 36” 10” to 11” 127
USS8050B24-TER4 25 4 1.8 1.8 1.8 1.8 1” x 36” 11” to 12” 122
USS7040C23-TER6 25 6 1.8 1.8 1.8 1.8 1” x 36” 10” to 11” 128
USS8050B23-TER6 25 6 1.8 1.8 1.8 1.8 1” x 36” 11” to 12” 123
USS7040C22-TER8 25 8 1.8 1.8 1.8 1.8 1” x 36” 10” to 11” 127
USS8050B22-TER8 25 8 1.8 1.8 1.8 1.8 1” x 36” 11” to 12” 123
30 foot Mounting height
USS8050B29-TER4 30 4 1.8 1.8 1.8 1.4 1” x 36” 11” to 12” 144
USS8050C29-TER4 30 4 1.8 1.8 1.8 1.8 1” x 36” 11” to 12” 170
USS8050B28-TER6 30 6 1.8 1.8 1.8 1 1” x 36” 11” to 12” 146
USS8050C28-TER6 30 6 1.8 1.8 1.8 1.8 1” x 36” 11” to 12” 170
USS8050B27-TER8 30 8 1.8 1.8 1.4 0.8 1” x 36” 11” to 12” 145
USS8050C27-TER8 30 8 1.8 1.8 1.8 1.8 1” x 36” 11” to 12” 169
35 foot Mounting height
USS8050C34-TER4 35 4 1.8 1.8 1.4 0.6 1” x 36” 11” to 12” 197
USS8050D34-TER4 35 4 1.8 1.8 1.8 1.8 1” x 36” 11” to 12” 254
USS8050C33-TER6 35 6 1.8 1.8 1.4 – 1” x 36” 11” to 12” 197
USS8050D33-TER6 35 6 1.8 1.8 1.8 1.8 1” x 36” 11” to 12” 253
USS8050C32-TER8 35 8 1.8 1.8 1 – 1” x 36” 11” to 12” 196
USS8050D32-TER8 35 8 1.8 1.8 1.8 1.8 1” x 36” 11” to 12” 250
40 foot Mounting height
USS8050D39-TER4 40 4 1.8 1.8 1.8 1 1” x 36” 11” to 12” 290
USS1060C39-TER4 40 4 1.8 1.8 1.8 1.8 1” x 36” 13” to 15” 282
USS8050D38-TER6 40 6 1.8 1.8 1.6 0.8 1” x 36” 11” to 12” 288
USS1060C38-TER6 40 6 1.8 1.8 1.8 1.8 1” x 36” 13” to 15” 281
USS8050D37-TER8 40 8 1.8 1.8 1.4 – 1” x 36” 11” to 12” 285
USS1060C37-TER8 40 8 1.8 1.8 1.8 1.4 1” x 36” 13” to 15” 278
45 foot Mounting height
USS1060C43-TER6 45 6 1.8 1.8 1.6 – 1” x 36” 13” to 15” 315
USS1060D43-TER6 45 6 1.8 1.8 1.8 1.8 1” x 36” 13” to 15” 407
USS1060C42-TER8 45 8 1.8 1.8 1.4 – 1” x 36” 13” to 15” 312
USS1060D42-TER8 45 8 1.8 1.8 1.8 1.8 1” x 36” 13” to 15” 402
Philips Pole Series 5

TER series Poles
Arm reach
Round tapered
aluminum poles
with twin tapered
elliptical arms
Mounting
height
Mounting height 20 to 45 feet
Round, tapered aluminum shaft, heat treated after tapering and welding
to T6 temper. Recommended tapered elliptical bracket (TER series) is
manufactured in 6063T6 aluminum alloy with standard 2 3 / 8 ” O.D. x 6”
long tenon.
Standard features include:
• flush mounted, internally reinforced hand hole
270º
bracket
Orientation
180º
0º
hand hole
90º
bracket
• ground lug
• cast aluminum anchor base (alloy 356T6) welded externally and internally
to shaft
• removable spun aluminum top cap comes with stainless steel set screws
• G40.21 50W steel anchor bolts with 50,000 PSI yield strength, minimum 12”
hot dipped galvanized coating, complete with hex nuts, flat washers and
nut covers
• rotary sanded or thermoset polyester powder coated
• direct burial poles are provided with a 2”x 9” wiring slot 24” below grade.
Shaft below grade is powder coated inside and out, and wrapped with rubber.
Catalog Number Explanation
Example: USS7040C19-2TER4 =
70 40 C 19 2TER4
Shaft diameter Shaft diameter Wall thickness Pole height Arm type
Pole options
at base
at top
(inches)
(feet)
70 = 7.0” 40 = 4.0” B = .156 17 – 19 2TER4 = Twin tapered elliptical arm, 4 foot reach DE = direct bury
80 = 8.0” 50 = 5.0” C = .188 22 – 24 2TER6 = Twin tapered elliptical arm, 6 foot reach Cast aluminum base is a standard option
10 = 10.0” 60 = 6.0” D = .250 27 – 29 2TER8 = Twin tapered elliptical arm, 8 foot reach
32 – 34
37 – 39
6
Philips Pole Series

Catalog Number
Mounting
height
(feet)
Arm Reach
(feet)
80
MPH
90
MPH
100 MPH 110 MPH
Anchor
Bolts
(inches)
Bolt
Circle
(inches)
Approx.
Weight
(pounds)
20 foot Mounting height
USS7040C19-2TER4 20 4 1.8 1.8 1.8 1.4 1” x 36” 10” to 11” 113
USS8050B19-2TER4 20 4 1.8 1.8 1.8 1.8 1” x 36” 11” to 12” 157
USS7040C18-2TER6 20 6 1.8 1.8 1.8 1 1” x 36” 11” to 12” 120
USS8050C18-2TER6 20 6 1.8 1.8 1.8 1.8 1” x 36” 11” to 12” 132
USS7040C17-2TER8 20 8 1.8 1.8 1.4 0.8 1” x 36” 11” to 12” 123
USS8050C17-2TER8 20 8 1.8 1.8 1.8 1.8 1” x 36” 11” to 12” 135
25 foot Mounting height
USS7040C24-2TER4 25 4 1.8 1.6 0.9 – 1” x 36” 10” to 11” 136
USS8050B24-2TER4 25 4 1.8 1.8 1.8 1.4 1” x 36” 11” to 12” 132
USS8050B23-2TER6 25 6 1.8 1.8 1 – 1” x 36” 11” to 12” 139
USS8050D23-2TER6 25 6 1.8 1.8 1.8 1.8 1” x 36” 11” to 12” 197
USS8050B22-2TER8 25 8 1.8 1.5 0.7 – 1” x 36” 11” to 12” 143
USS8050D22-2TER8 25 8 1.8 1.8 1.8 1.8 1” x 36” 11” to 12” 198
30 foot Mounting height
USS8050C29-2TER4 30 4 1.8 1.6 1 0.5 1” x 36” 11” to 12” 180
USS8050D29-2TER4 30 4 1.8 1.8 1.8 1.4 1” x 36” 11” to 12” 228
USS8050C28-2TER6 30 6 1.8 1.4 0.7 – 1” x 36” 11” to 12” 186
USS8050D28-2TER6 30 6 1.8 1.8 1.8 1.1 1” x 36” 11” to 12” 233
USS8050C27-2TER8 30 8 1.8 1 – – 1” x 36” 11” to 12” 189
USS8050D27-2TER8 30 8 1.8 1.8 1.5 0.8 1” x 36” 11” to 12” 234
35 foot Mounting height
USS8050D34-2TER4 35 4 1.8 1.8 1 0.5 1” x 36” 11” to 12” 264
USS1060C34-2TER4 35 4 1.8 1.8 1.8 1.1 1” x 36” 13” to 15” 258
USS8050D33-2TER6 35 6 1.8 1.4 0.7 – 1” x 36” 11” to 12” 269
USS1060C33-2TER6 35 6 1.8 1.8 1.6 0.8 1” x 36” 13” to 15” 263
USS8050D32-2TER8 35 8 1.8 1.2 – – 1” x 36” 11” to 12” 270
USS1060D32-2TER8 35 8 1.8 1.8 1.8 1.8 1” x 36” 13” to 15” 332
40 foot Mounting height
USS1060C39-2TER4 40 4 1.8 1.8 1 – 1” x 36” 13” to 15” 292
USS1060D39-2TER4 40 4 1.8 1.8 1.8 1.5 1” x 36” 13” to 15” 375
USS1060C38-2TER6 40 6 1.8 1.5 0.7 – 1” x 36” 13” to 15” 297
USS1060D38-2TER6 40 6 1.8 1.8 1.8 1.1 1” x 36” 13” to 15” 378
USS1060C37-2TER8 40 8 1.8 1.2 – – 1” x 36” 13” to 15” 298
USS1060D37-2TER8 40 8 1.8 1.8 1.6 0.7 1” x 36” 13” to 15” 377
45 foot Mounting height
USS1060D43-2TER6 45 6 1.8 1.8 1.1 – 1” x 36” 13” to 15” 423
USS1060D42-2TER8 45 8 1.8 1.8 0.8 – 1” x 36” 13” to 15” 422
Philips Pole Series 7

TRU series POLES
Arm reach
Round tapered
aluminum poles with
tapered truss arm
Mounting height 20 to 40 feet
Mounting
height
Round, tapered aluminum shaft, heat treated after tapering and welding to
T6 temper. Recommended tapered truss arm (TRU series) is manufactured
in 6063T6 aluminum alloy with standard 2 3 / 8 ” O.D. x 6” long tenon.
270º
bracket
Orientation
180º
0º
hand hole
90º
bracket
Standard features include:
• flush mounted, internally reinforced hand hole
• ground lug
• cast aluminum anchor base (alloy 356T6) welded externally and internally
to shaft
• removable spun aluminum top cap comes with stainless steel set screws
• G40.21 50W steel anchor bolts with 50,000 PSI yield strength, minimum 12”
hot dipped galvanized coating, complete with hex nuts, flat washers and
nut covers
• rotary sanded or thermoset polyester powder coated
• direct burial poles are provided with a 2”x 9” wiring slot 24” below grade.
Shaft below grade is powder coated inside and out, and wrapped with rubber.
Catalog Number Explanation
Example: USS7040C22.5-TRU8 =
70 40 C 22.5 TRU8
Shaft diameter Shaft diameter Wall thickness Pole height Arm type
Pole options
at base
at top
(inches)
(feet)
70 = 7.0” 40 = 4.0” B = .156 22.5 TRU4 = Tapered truss arm, 4 foot reach DE = direct bury
80 = 8.0” 50 = 5.0” C = .188 27.5 TRU6 = Tapered truss arm, 6 foot reach Cast aluminum base is a standard option
10 = 10.0” 60 = 6.0” D = .250 32.5 TRU8 = Tapered truss arm, 8 foot reach
37.5
8
Philips Pole Series

Catalog Number
Mounting
height
(feet)
Arm Reach
(feet)
80
MPH
90
MPH
100 MPH 110 MPH
Anchor
Bolts
(inches)
Bolt
Circle
(inches)
Approx.
Weight
(pounds)
25 foot Mounting height
USS7040C22.5-TRU8 25 8 1.8 1.8 1.8 – 1” x 36” 10” to 11” 155
USS8050B22.5-TRU8 25 8 1.8 1.8 1.8 1.5 1” x 36” 11” to 12” 155
USS8050B22.5-TRU10 25 10 1.8 1.8 1.8 – 1” x 36” 11” to 12” 164
USS8050C22.5-TRU10 25 10 1.8 1.8 1.8 1.8 1” x 36” 11” to 12” 184
USS8050B22.5-TRU12 25 12 1.8 1.8 – – 1” x 36” 11” to 12” 173
USS8050C22.5-TRU12 25 12 1.8 1.8 1.8 – 1” x 36” 11” to 12” 193
USS8050C22.5-TRU15 25 15 1.8 1.8 1.4 – 1” x 36” 11” to 12” 186
USS8050D22.5-TRU15 25 15 1.8 1.8 1.8 1.8 1” x 36” 11” to 12” 206
30 foot Mounting height
USS8050B27.5-TRU8 30 8 1.8 1.8 – – 1” x 36” 11” to 12” 178
USS8050D27.5-TRU8 30 8 1.8 1.8 1.8 1.8 1” x 36” 11” to 12” 248
USS8050C27.5-TRU10 30 10 1.8 1.8 – – 1” x 36” 11” to 12” 211
USS8050D27.5-TRU10 30 10 1.8 1.8 1.8 1.8 1” x 36” 11” to 12” 257
USS8050C27.5-TRU12 30 12 1.8 1.6 – – 1” x 36” 11” to 12” 220
USS8050D27.5-TRU12 30 12 1.8 1.8 1.8 1 1” x 36” 11” to 12” 266
USS8050D27.5-TRU15 30 15 1.8 1.8 1.8 – 1” x 36” 11” to 12” 279
USS1060C27.5-TRU15 30 15 1.8 1.8 1.8 1.8 1” x 36” 13” to 15” 270
35 foot Mounting height
USS8050C32.5-TRU8 35 8 1.8 1.2 – – 1” x 36” 11” to 12” 229
USS8050D32.5-TRU8 35 8 1.8 1.8 1.8 1 1” x 36” 11” to 12” 283
USS8050D32.5-TRU10 35 10 1.8 1.8 1.2 – 1” x 36” 11” to 12” 292
USS1060C32.5-TRU10 35 10 1.8 1.8 1.8 1.2 1” x 36” 13” to 15” 282
USS8050D32.5-TRU12 35 12 1.8 1.8 – – 1” x 36” 11” to 12” 301
USS1060C32.5-TRU12 35 12 1.8 1.8 1.8 – 1” x 36” 13” to 15” 291
USS8050D32.5-TRU15 35 15 1.8 – – – 1” x 36” 11” to 12” 314
USS1060D32.5-TRU15 35 15 1.8 1.8 1.8 1.8 1” x 36” 13” to 15” 373
40 foot Mounting height
USS8050D37.5-TRU8 40 8 1.8 1.8 – – 1” x 36” 11” to 12” 319
USS1060C37.5-TRU8 40 8 1.8 1.8 1.8 – 1” x 36” 13” to 15” 307
USS8050D37.5-TRU10 40 10 1.8 – – – 1” x 36” 11” to 12” 328
USS1060C37.5-TRU10 40 10 1.8 1.8 1 – 1” x 36” 13” to 15” 316
USS1060C37.5-TRU12 40 12 1.8 1.8 – – 1” x 36” 13” to 15” 325
USS1060D37.5-TRU12 40 12 1.8 1.8 1.8 1 1” x 36” 13” to 15” 405
USS1060C37.5-TRU15 40 15 1.8 1 – – 1” x 36” 13” to 15” 338
USS1060D37.5-TRU15 40 15 1.8 1.8 1.8 – 1” x 36” 13” to 15” 418
Philips Pole Series 9

TRU series POLES
Mounting
height
Arm reach
Round tapered
aluminum poles
with twin tapered
truss arms
Mounting height 25 to 40 feet
Round, tapered aluminum shaft, heat treated after tapering and welding to
T6 temper. Recommended tapered truss arm (TRU series) is manufactured
in 6063T6 aluminum alloy with standard 2 3 / 8 ” O.D. x 6” long tenon.
270º
bracket
Orientation
180º
0º
hand hole
90º
bracket
Standard features include:
• flush mounted, internally reinforced hand hole
• ground lug
• cast aluminum anchor base (alloy 356T6) welded externally and internally
to shaft
• removable spun aluminum top cap comes with stainless steel set screws
• G40.21 50W steel anchor bolts with 50,000 PSI yield strength, minimum 12”
hot dipped galvanized coating, complete with hex nuts, flat washers and
nut covers
• rotary sanded or thermoset polyester powder coated
• direct burial poles are provided with a 2”x 9” wiring slot 24” below grade.
Shaft below grade is powder coated inside and out, and wrapped with rubber.
Catalog Number Explanation
Example: USS1060D37.5-2TRU15 =
10 60 D 37.5 2TRU8
Shaft diameter Shaft diameter Wall thickness Pole height Arm Type
Pole options
at base
at top
(inches)
(feet)
80 = 8.0” 50 = 5.0” C = .188 22.5 2TRU8 = Twin tapered truss arm, 8’ reach DE = direct bury
10 = 10.0” 60 = 6.0” D = .250 27.5 2TRU10 = Twin tapered truss arm, 10’ reach Cast aluminum base is a standard option
32.5 2TRU12 = Twin tapered truss arm, 12’ reach
37.5 2TRU15 = Twin tapered truss arm, 15’ reach
10
Philips Pole Series

Catalog Number
Mounting
height
(feet)
Arm Reach
(feet)
80
MPH
90
MPH
100 MPH 110 MPH
Anchor
Bolts
(inches)
Bolt
Circle
(inches)
Approx.
Weight
(pounds)
25 foot Mounting height
USS8050C22.5-2TRU8 25 8 1.8 1.6 – – 1” x 36” 11” to 12” 155
USS8050D22.5-2TRU8 25 8 1.8 1.8 1.8 1 1” x 36” 11” to 12” 155
USS8050D22.5-2TRU10 25 10 1.8 1.8 1 – 1” x 36” 11” to 12” 164
USS1060C22.5-2TRU10 25 10 1.8 1.8 1.8 1.1 1” x 36” 13” to 15” 184
USS8050D22.5-2TRU12 25 12 1.8 1.5 – – 1” x 36” 11” to 12” 173
USS1060C22.5-2TRU12 25 12 1.8 1.8 1.5 – 1” x 36” 13” to 15” 193
USS1060C22.5-2TRU15 25 15 1.8 1.8 – – 1” x 36” 13” to 15” 186
USS1060D22.5-2TRU15 25 15 1.8 1.8 1.8 1.2 1” x 36” 13” to 15” 206
30 foot Mounting height
USS8050D27.5-2TRU8 30 8 1.8 1.6 – – 1” x 36” 11” to 12” 178
USS1060C27.5-2TRU8 30 8 1.8 1.8 1.6 – 1” x 36” 13” to 15” 248
USS8050D27.5-2TRU10 30 10 1.8 – – – 1” x 36” 11” to 12” 211
USS1060C27.5-2TRU10 30 10 1.8 1.8 – – 1” x 36” 11” to 12” 257
USS1060C27.5-2TRU12 30 12 1.8 1.1 – – 1” x 36” 13” to 15” 220
USS1060D27.5-2TRU12 30 12 1.8 1.8 1.8 – 1” x 36” 13” to 15” 266
USS1060C27.5-2TRU15 30 15 1.8 – – – 1” x 36” 13” to 15” 279
USS1060D27.5-2TRU15 30 15 1.8 1.8 1 – 1” x 36” 13” to 15” 270
35 foot Mounting height
USS1060C32.5-2TRU8 35 8 1.8 1.4 – – 1” x 36” 13” to 15” 307
USS1060D32.5-2TRU8 35 8 1.8 1.8 1.8 – 1” x 36” 13” to 15” 381
USS1060C32.5-2TRU10 35 10 1.8 – – – 1” x 36” 13” to 15” 330
USS1060D32.5-2TRU10 35 10 1.8 1.8 1 – 1” x 36” 13” to 15” 399
USS1060D32.5-2TRU12 35 12 1.8 1.4 – – 1” x 36” 13” to 15” 417
USS1060D32.5-2TRU15 35 15 1.8 – – – 1” x 36” 13” to 15” 443
40 foot Mounting height
USS1060C37.5-2TRU8 40 8 1.4 – – – 1” x 36” 13” to 15” 426
USS1060D37.5-2TRU8 40 8 1.8 1.8 – – 1” x 36” 13” to 15” 426
USS1060DX37.5-2TRU10* 40 10 1.8 1.8 – – 1.25” x 48” 14” to 15” 489
USS1060DX37.5-2TRU12* 40 12 1.8 1 – – 1.25” x 48” 14” to 15” 507
USS1060DX37.5-2TRU15* 40 15 1.8 – – – 1.25” x 48” 14” to 15” 533
* includes 5 foot internal sleeve
Philips Pole Series 11

PRE series Poles
Arm reach
Round tapered
aluminum poles
with pipe truss arm
Mounting height 25 to 40 feet
Mounting
height
Round, tapered aluminum shaft, heat treated after tapering and welding to
T6 temper. Recommended pipe truss arm (PRE series) is manufactured in
6063T6 aluminum alloy with standard 2 3 / 8 ” O.D. x 6” long tenon.
270º
bracket
Orientation
180º
0º
hand hole
90º
bracket
Standard features include:
• flush mounted, internally reinforced hand hole
• ground lug
• cast aluminum anchor base (alloy 356T6) welded externally and internally
to shaft
• removable spun aluminum top cap comes with stainless steel set screws
• G40.21 50W steel anchor bolts with 50,000 PSI yield strength, minimum 12”
hot dipped galvanized coating, complete with hex nuts, flat washers and
nut covers
• rotary sanded or thermoset polyester powder coated
• direct burial poles are provided with a 2”x 9” wiring slot 24” below grade.
Shaft below grade is powder coated inside and out, and wrapped with rubber.
Catalog Number Explanation
Example: USS7040C22-PRE6 =
70 40 C 22 PRE6
Shaft diameter Shaft diameter Wall thickness Pole height Arm Type
Pole options
at base
at top
(inches)
(feet)
70 = 7.0” 40 = 4.0” B = .156 22 PRE6 = Pipe truss arm, 6 foot reach DE = direct bury
80 = 8.0” 50 = 5.0” C = .188 27 PRE8 = Pipe truss arm, 8 foot reach Cast aluminum base is a standard option
10 = 10.0” 60 = 6.0” D = .250 32 PRE10 = Pipe truss arm, 10 foot reach
37 PRE12 = Pipe truss arm, 12 foot reach
12
Philips Pole Series

Catalog Number
Mounting
height
(feet)
Arm Reach
(feet)
80
MPH
90
MPH
100 MPH 110 MPH
Anchor
Bolts
(inches)
Bolt
Circle
(inches)
Approx.
Weight
(pounds)
25 foot Mounting height
USS7040C22-PRE6 25 6 1.8 1.8 1.8 1.7 1” x 36” 10” to 11” 138
USS8050B22-PRE6 25 6 1.8 1.8 1.8 1.8 1” x 36” 11” to 12” 134
USS7040C22-PRE8 25 8 1.8 1.8 1.8 – 1” x 36” 10” to 11” 143
USS8050B22-PRE8 25 8 1.8 1.8 1.8 1.5 1” x 36” 11” to 12” 139
USS8050B22-PRE10 25 10 1.8 1.8 1.8 – 1” x 36” 11” to 12” 144
USS8050C22-PRE10 25 10 1.8 1.8 1.8 1.8 1” x 36” 11” to 12” 163
USS8050B22-PRE12 25 12 1.8 1.8 – – 1” x 36” 11” to 12” 150
USS8050C22-PRE12 25 12 1.8 1.8 1.8 – 1” x 36” 11” to 12” 169
30 foot Mounting height
USS8050B27-PRE6 30 6 1.8 1.8 1.4 – 1” x 36” 11” to 12” 156
USS8050C27-PRE6 30 6 1.8 1.8 1.8 1.6 1” x 36” 11” to 12” 180
USS8050B27-PRE8 30 8 1.8 1.8 – – 1” x 36” 11” to 12” 161
USS8050D27-PRE8 30 8 1.8 1.8 1.8 1.8 1” x 36” 11” to 12” 230
USS8050C27-PRE10 30 10 1.8 1.8 – – 1” x 36” 11” to 12” 190
USS8050D27-PRE10 30 10 1.8 1.8 1.8 1.8 1” x 36” 11” to 12” 235
USS8050C27-PRE12 30 12 1.8 1.6 – – 1” x 36” 11” to 12” 196
USS8050D27-PRE12 30 12 1.8 1.8 1.8 1 1” x 36” 11” to 12” 241
35 foot Mounting height
USS8050C32-PRE6 35 6 1.8 1.8 1 – 1” x 36” 11” to 12” 207
USS8050D32-PRE6 35 6 1.8 1.8 1.8 1.8 1” x 36” 11” to 12” 261
USS8050C32-PRE8 35 8 1.8 1.2 – – 1” x 36” 11” to 12” 212
USS8050D32-PRE8 35 8 1.8 1.8 1.8 1 1” x 36” 11” to 12” 266
USS8050D32-PRE10 35 10 1.8 1.8 1.2 – 1” x 36” 11” to 12” 271
USS1060C32-PRE10 35 10 1.8 1.8 1.8 1.2 1” x 36” 13” to 15” 260
USS8050D32-PRE12 35 12 1.8 1.8 – – 1” x 36” 11” to 12” 277
USS1060C32-PRE12 35 12 1.8 1.8 1.8 – 1” x 36” 13” to 15” 266
40 foot Mounting height
USS8050D37-PRE6 40 6 1.8 1.8 1.4 – 1” x 36” 11” to 12” 297
USS1060C37-PRE6 40 6 1.8 1.8 1.8 1.8 1” x 36” 13” to 15” 284
USS8050D37-PRE8 40 8 1.8 1.8 – – 1” x 36” 11” to 12” 302
USS1060C37-PRE8 40 8 1.8 1.8 1.8 – 1” x 36” 13” to 15” 289
USS8050D37-PRE10 40 10 1.8 – – – 1” x 36” 11” to 12” 307
USS1060C37-PRE10 40 10 1.8 1.8 1 – 1” x 36” 13” to 15” 294
USS1060C37-PRE12 40 12 1.8 1.8 – – 1” x 36” 13” to 15” 300
USS1060D37-PRE12 40 12 1.8 1.8 1.8 1 1” x 36” 13” to 15” 379
Philips Pole Series 13

PRE series Poles
Mounting
height
Arm reach
Round tapered
aluminum poles
with twin pipe
truss arms
Mounting height 25 to 40 feet
Round, tapered aluminum shaft, heat treated after tapering and welding to
T6 temper. Recommended pipe truss arm (PRE series) is manufactured in
6063T6 aluminum alloy with standard 2 3 / 8 ” O.D. x 6” long tenon.
Standard features include:
• flush mounted, internally reinforced hand hole
• ground lug
Orientation
180º
• cast aluminum anchor base (alloy 356T6) welded externally and internally
to shaft
• removable spun aluminum top cap comes with stainless steel set screws
270º
bracket
90º
bracket
• G40.21 50W steel anchor bolts with 50,000 PSI yield strength, minimum 12”
hot dipped galvanized coating, complete with hex nuts, flat washers and
nut covers
0º
hand hole
• rotary sanded or thermoset polyester powder coated
• direct burial poles are provided with a 2”x 9” wiring slot 24” below grade.
Shaft below grade is powder coated inside and out, and wrapped with rubber.
Catalog Number Explanation
Example: USS8050C22-2PRE6 =
70 50 C 22 2PRE6
Shaft diameter
Shaft diameter
Wall thickness
Pole height
Arm Type
Pole options
at base
at top
(inches)
(feet)
80 = 8.0” 50 = 5.0” C = .188 22 2PRE6 = Twin pipe truss arm, 6 foot reach DE = direct bury
10 = 10.0” 60 = 6.0” D = .250 27 2PRE8 = Twin pipe truss arm, 8 foot reach Cast aluminum base is a standard option
32 2PRE10 = Twin pipe truss arm, 10 foot reach
37 2PRE12 = Twin pipe truss arm, 12 foot reach
14
Philips Pole Series

Catalog Number
Mounting
height
(feet)
Arm Reach
(feet)
80
MPH
90
MPH
100 MPH 110 MPH
Anchor
Bolts
(inches)
Bolt
Circle
(inches)
Approx.
Weight
(pounds)
25 foot Mounting height
USS8050C22-2PRE6 25 6 1.8 1.8 1.5 – 1” x 36” 11” to 12” 193
USS8050D22-2PRE6 25 6 1.8 1.8 1.8 1.8 1” x 36” 11” to 12” 235
USS8050C22-2PRE8 25 8 1.8 1.6 – – 1” x 36” 11” to 12” 203
USS8050D22-2PRE8 25 8 1.8 1.8 1.8 1 1” x 36” 11” to 12” 245
USS8050D22-2PRE10 25 10 1.8 1.8 1 – 1” x 36” 11” to 12” 255
USS1060C22-2PRE10 25 12 1.8 1.8 1.8 1.1 1” x 36” 13” to 15” 246
USS8050D22-2PRE12 25 12 1.8 1.5 – – 1” x 36” 11” to 12” 267
USS1060C22-2PRE12 25 12 1.8 1.8 1.5 – 1” x 36” 13” to 15” 258
30 foot Mounting height
USS8050D27-2PRE6 30 6 1.8 1.8 1.5 – 1” x 36” 11” to 12” 249
USS1060C27-2PRE6 30 6 1.8 1.8 1.8 1.6 1” x 36” 13” to 15” 240
USS8050D27-2PRE8 30 8 1.8 1.6 – – 1” x 36” 11” to 12” 259
USS1060C27-2PRE8 30 8 1.8 1.8 1.6 – 1” x 36” 13” to 15” 250
USS8050D27-2PRE10 30 10 1.8 – – – 1” x 36” 11” to 12” 269
USS1060C27-2PRE10 30 10 1.8 1.8 – – 1” x 36” 13” to 15” 260
USS1060C27-2PRE12 30 12 1.8 1.1 – – 1” x 36” 13” to 15” 272
USS1060D27-2PRE12 30 12 1.8 1.8 1.8 – 1” x 36” 13” to 15” 329
35 foot Mounting height
USS1060C32-2PRE6 35 6 1.8 1.8 1.2 – 1” x 36” 13” to 15” 274
USS1060D32-2PRE6 35 6 1.8 1.8 1.8 1.8 1” x 36” 13” to 15” 342
USS1060C32-2PRE8 35 8 1.8 1.4 – – 1” x 36” 13” to 15” 284
USS1060D32-2PRE8 35 8 1.8 1.8 1.8 – 1” x 36” 13” to 15” 352
USS1060C32-2PRE10 35 10 1.8 – – – 1” x 36” 13” to 15” 294
USS1060D32-2PRE10 35 10 1.8 1.8 1 – 1” x 36” 13” to 15” 362
USS1060D32-2PRE12 35 12 1.8 1.4 – – 1” x 36” 13” to 15” 374
40 foot Mounting height
USS1060C37-2PRE6 40 6 1.8 1.2 – – 1” x 36” 13” to 15” 308
USS1060D37-2PRE6 40 6 1.8 1.8 1.8 – 1” x 36” 13” to 15” 387
USS1060C37-2PRE8 40 8 1.4 – – – 1” x 36” 13” to 15” 318
USS1060D37-2PRE8 40 8 1.8 1.8 – – 1” x 36” 13” to 15” 397
USS1060DX37-2PRE10* 40 10 1.8 1.8 – – 1.25” x 48” 14” to 15” 452
USS1060DX37-2PRE12* 40 12 1.8 1 – – 1.25” x 48” 14” to 15” 464
* includes 5 foot internal sleeve
Philips Pole Series 15

Poles
Arm reach
Round tapered
aluminum poles
single davit
Mounting
height
Mounting height 20 to 40 feet
Round, tapered aluminum shaft, heat treated after tapering and welding to
T6 temper. Fixed tenon is 2 3 / 8 ” O.D. x 6” long.
270º
bracket
Orientation
180º
0º
hand hole
90º
bracket
Standard features include:
• flush mounted, internally reinforced hand hole
• ground lug
• cast aluminum anchor base (alloy 356T6) welded externally and internally
to shaft
• G40.21 50W steel anchor bolts with 50,000 PSI yield strength, minimum 12”
hot dipped galvanized coating, complete with hex nuts, flat washers and
nut covers
• rotary sanded or thermoset polyester powder coated
• direct burial poles are provided with a 2”x 9” wiring slot 24” below grade.
Shaft below grade is powder coated inside and out, and wrapped with rubber.
Catalog Number Explanation
Example: USS7050C12.5-DV6 =
70 50 C 12.5 DV6
Shaft diameter Shaft diameter Wall thickness Pole height Arm type
Pole options
at base
at top
(inches)
(feet)
70 = 7.0” 50 = 5.0” C = .188 10.5 DV6 = 6 foot reach DE = direct bury
80 = 8.0” 60 = 6.0” D = .250 12.5 DV8 = 8 foot reach Cast aluminum base is a standard option
10 = 10.0” 15.5 DV9 = 9 foot reach
17.5
20.5
22.5
25.5
27.5
30.5
32.5
16
Philips Pole Series

Catalog Number
Mounting
height
(feet)
Arm Reach
(feet)
80
MPH
90
MPH
100 MPH 110 MPH
Anchor
Bolts
(inches)
Bolt
Circle
(inches)
Approx.
Weight
(pounds)
20 foot Mounting height
USS7050C12.5-DV6 20 6 1.8 1.8 1.8 1.8 1” x 36” 10” to 11” 119
USS7050C12.5-DV8 20 8 1.8 1.8 1.8 1.8 1” x 36” 10” to 11” 129
USS7060C10.5-DV9 20 9 1.8 1.8 1.8 1.8 1” x 36” 10” to 11” 130
25 foot Mounting height
USS7050C17.5-DV6 25 6 1.8 1.8 1.8 1.8 1” x 36” 10” to 11” 143
USS7050C17.5-DV8 25 8 1.8 1.8 1.8 – 1” x 36” 10” to 11” 153
USS8060C15.5-DV9 25 9 1.8 1.8 1.8 1.8 1” x 36” 11” to 12” 165
30 foot Mounting height
USS8050C22.5-DV6 30 6 1.8 1.8 1.8 1.8 1” x 36” 11” to 12” 183
USS8050C22.5-DV8 30 8 1.8 1.8 1.8 – 1” x 36” 11” to 12” 193
USS8060C20.5-DV9 30 9 1.8 1.8 1.8 – 1” x 36” 11” to 12” 192
USS8050D22.5-DV6 30 6 1.8 1.8 1.8 1.8 1” x 36” 11” to 12” 225
USS8050D22.5-DV8 30 8 1.8 1.8 1.8 1.8 1” x 36” 11” to 12” 235
USS8060D20.5-DV9 30 9 1.8 1.8 1.8 1.8 1” x 36” 11” to 12” 230
35 foot Mounting height
USS8050C27.5-DV6 35 6 1.8 1.8 – – 1” x 36” 11” to 12” 210
USS8050C27.5-DV8 35 8 1.8 1.4 – – 1” x 36” 11” to 12” 220
USS8060D25.5-DV9 35 9 1.8 1.8 1.8 – 1” x 36” 11” to 12” 219
USS8050D27.5-DV6 35 6 1.8 1.8 1.8 1.8 1” x 36” 11” to 12” 260
USS8050D27.5-DV8 35 8 1.8 1.8 1.8 – 1” x 36” 11” to 12” 270
USS1060C25.5-DV9 35 9 1.8 1.8 1.8 1.8 1” x 36” 13” to 15” 262
40 foot Mounting height
USS8050D32.5-DV6 40 6 1.8 1.8 1.4 – 1” x 36” 11” to 12” 296
USS8050D32.5-DV8 40 8 1.8 1.8 – – 1” x 36” 11” to 12” 306
USS1060C30.5-DV9 40 9 1.8 1.8 1.8 – 1” x 36” 13” to 15” 296
USS1060D30.5-DV9 40 9 1.8 1.8 1.8 1.8 1” x 36” 13” to 15” 366
Philips Pole Series 17

Poles
Drilling/Tenon
(as required)
Round tapered
aluminum poles
Mounting height 10 to 45 feet
Pole
height
Round tapered aluminum shaft, heat treated after tapering and welding to
T6 temper.
Standard features include:
• tenon or pre-drilled to spec
• flush mounted, internally reinforced hand hole
• ground lug
• cast aluminum anchor base (alloy 356T6) welded externally and internally
to shaft
• removable spun aluminum top cap comes with stainless steel set screws
Orientation
180º
• G40.21 50W steel anchor bolts with 50,000 PSI yield strength, minimum 12”
hot dipped galvanized coating, complete with hex nuts, flat washers and
nut covers
270º
bracket
90º
bracket
• rotary sanded or thermoset polyester powder coated
• direct burial poles are provided with a 2”x 9” wiring slot 24” below grade.
Shaft below grade is powder coated inside and out, and wrapped with rubber.
0º
hand hole
• shaft below grade is as per specification requirement
Catalog Number Explanation
Example: USS4030A10 =
40 30 A 10
USS Catalog Number Explanation
Shaft diameter Shaft diameter Wall thickness Pole height
Example: USS6040B19AB-TER4 =
at base
at top
(inches)
(feet)
Mounting
Pole options
40 = 4.0” 30 = 3.0” A = .125 10 Tenon or drilling as required DE = direct bury
50 = 5.0” 40 = 4.0” C = .188 12 Cast aluminum base is a standard option
60 = 6.0” 50 = 5.0” D = .250 15
70 = 7.0” 60 = 6.0” 18
80 = 8.0” 20
10 = 10.0” 25
30
35
40
45
18
Philips Pole Series

Catalog Number
Mounting
height
(feet)
80
MPH
90
MPH
100 MPH 110 MPH
Anchor
Bolts
(inches)
Bolt
Circle
(inches)
Approx.
Weight
(pounds)
10 foot Mounting height
USS4030A10 10 6.5 4.5 3.5 2.5 0.75” x 27” 6.75” 24
12 foot Mounting height
USS4030A12 12 5 3.5 2.5 2 0.75” x 27” 6.75” 28
15 foot Mounting height
USS5030A15 15 4.5 3.5 2.5 2 1” x 36” 8” to 9” 42
USS5030C15 15 8 6 4.5 3.5 1” x 36” 8” to 9” 57
18 foot Mounting height
USS5030C18 18 6 4 3 2.5 1” x 36” 8” to 9” 67
USS6040C18 18 9 7 5.5 4.5 1” x 36” 9” to 10” 79
20 foot Mounting height
USS6040A20 20 4.5 3 2 1.8 1” x 36” 9” to 10” 62
USS6040C20 20 7.5 5.5 4.5 3.5 1” x 36” 9” to 10” 87
USS7040C20 20 11.5 9 7 5.5 1” x 36” 10” to 11” 105
25 foot Mounting height
USS7040C25 25 8 6 4.5 3.5 1” x 36” 10” to 11” 128
USS8050C25 25 11.5 9 7 5.5 1” x 36” 11” to 12” 145
USS8050D25 25 16.5 12.5 10 8 1” x 36” 11” to 12” 187
30 foot Mounting height
USS8050C30 30 7.5 6 4.5 3.5 1” x 36” 11” to 12” 172
USS8050D30 30 11 8.5 6.5 5.5 1” x 36” 11” to 12” 222
USS1060C30 30 14.5 11 8.5 7 1” x 36” 13” to 15” 213
35 foot Mounting height
USS8050C35 35 5.5 4 3 2 1” x 36” 11” to 12” 199
USS8050D35 35 8.5 6.5 5 3.5 1” x 36” 11” to 12” 258
USS1060C35 35 11.5 8.5 6.5 5 1” x 36” 13” to 15” 247
USS1060D35 35 16 12.5 9.5 7.5 1” x 36” 13” to 15” 321
40 foot Mounting height
USS8050D40 40 6 4.5 3 2.5 1” x 36” 11” to 12” 294
USS1060C40 40 8.5 6.5 4.5 3.5 1” x 36” 13” to 15” 281
USS1060D40 40 13 10 7.5 5.5 1” x 36” 13” to 15” 366
45 foot Mounting height
USS1060C45 45 6.5 4.5 3.5 2 1” x 36” 13” to 15” 315
USS1060D45 45 10.5 7.5 6 4 1” x 36” 13” to 15” 411
Philips Pole Series 19

Poles
Drilling/Tenon
(as required)
Round straight
aluminum poles
Pole
height
Mounting height 20 to 40 feet
Round, straight aluminum shaft, heat treated after welding to T6 temper.
Standard features include:
• tenon or pre-drilled to spec
• flush mounted, internally reinforced hand hole
• ground lug
• cast aluminum anchor base (alloy 356T6) welded externally and internally
to shaft
• removable spun aluminum top cap comes with stainless steel set screws
Orientation
180º
• G40.21 50W steel anchor bolts with 50,000 PSI yield strength, minimum 12”
hot dipped galvanized coating, complete with hex nuts, flat washers and
nut covers
• rotary sanded or thermoset polyester powder coated
270º
bracket
90º
bracket
• direct burial poles are provided with a 2”x 9” wiring slot 24” below grade.
Shaft below grade is powder coated inside and out, and wrapped with rubber.
• shaft below grade is as per specification requirement
0º
hand hole
Catalog Number Explanation
Example: USS5050C20 =
50 50 C 20
Shaft diameter Shaft diameter Wall thickness Pole height Mounting
Poles options
at base
at top
(inches)
(feet)
50 = 5.0” 50 = 5.0” C = .188 20 Tenon or drilling as required DE = direct bury
60 = 6.0” 60 = 6.0” D = .250 25 Cast aluminum base is a standard option
70 = 7.0” 70 = 7.0” 30
80 = 8.0” 80 = 8.0” 35
10 = 10.0” 10 = 10.0” 40
20
Philips Pole Series

Catalog Number
Mounting
height
(feet)
80
MPH
90
MPH
100 MPH 110 MPH
Anchor
Bolts
(inches)
Bolt
Circle
(inches)
Approx.
Weight
(pounds)
20 foot Mounting height
USS5050C20 20 4 3 2.5 – 1” x 36” 8” to 9” 75
USS6060C20 20 8 6 4.5 3.5 1” x 36” 9” to 10” 89
USS7070C20 20 12 9 7 6 1” x 36” 10” to 11” 105
25 foot Mounting height
USS6060C25 25 5 3.5 2.5 2 1” x 36” 9” to 10” 109
USS7070C25 25 8 6 5 4 1” x 36” 10” to 11” 128
USS8080C25 25 12 9 7 5.5 1” x 36” 11” to 12” 151
30 foot Mounting height
USS8080C30 30 8 6 4.5 3 1” x 36” 11” to 12” 178
USS8080D30 30 11.5 9 7 5 1” x 36” 11” to 12” 230
35 foot Mounting height
USS8080D35 35 9 6.5 5 3.5 1” x 36” 11” to 12” 265
USS1010C35 35 11.5 8 6 4 1” x 36” 13” to 15” 253
40 foot Mounting height
USS1010C40 40 9 6 4 2.5 1” x 36” 13” to 15” 287
USS1010D40 40 13.5 9 6.5 4.5 1” x 36” 13” to 15” 375
Philips Pole Series 21

Poles
Drilling/Tenon
(as required)
Square straight
aluminum poles
Mounting height 20 to 35 feet
Pole
height
Square with rounded corners aluminum shaft, heat treated after tapering
and welding to T6 temper.
Standard features include:
• tenon or pre-drilled to spec
• flush mounted, internally reinforced hand hole
• ground lug
• cast aluminum anchor base (alloy 356T6) welded externally and internally
to shaft
• removable spun aluminum top cap comes with stainless steel set screws
• G40.21 50W steel anchor bolts with 50,000 PSI yield strength, minimum
12” hot dipped galvanized coating, complete with hex nuts, flat washers and
Orientation
nut covers
270º
bracket
180º
90º
bracket
• rotary sanded or thermoset polyester powder coated
• direct burial poles are provided with a 2”x 9” wiring slot 24” below grade.
Shaft below grade is powder coated inside and out, and wrapped with rubber.
• shaft below grade is as per specification requirement
0º
hand hole
Catalog Number Explanation
Example: USS40SQC20 =
40 SQ C 20
Shaft square at Foundation
Wall thickness Pole height Mounting
Pole options
top and base
(inches)
(feet)
40 = 4.0” SQ = square pole/base C = .188 15 Tenon or drilling as required DE = direct bury
50 = 5.0” D = .250 20 Cast aluminum base is a standard option
60 = 6.0” 25
30
22
Philips Pole Series

Catalog Number
Mounting
height
(feet)
80
MPH
90
MPH
100 MPH 110 MPH
Anchor
Bolts
(inches)
Bolt
Circle
(inches)
Approx.
Weight
(pounds)
20 foot Mounting height
USS40SQC20 20 4.5 3.5 1.9 – 0.75” x 27” 8.5” to 9.5” 77
USS50SQC20 20 12.4 9.6 5 3.2 0.75” x 27” 10.5” to 11.25” 97
USS60SQC20 20 16.8 11.9 8.3 6.4 1” x 36” 12” to 12.75” 121
USS60SQD20 20 24 17.6 12.9 9.5 1” x 36” 12” to 12.75” 151
25 foot Mounting height
USS50SQC25 25 4.9 2.6 1.1 – 0.75” x 27” 10.5” to 11.25” 118
USS60SQC25 25 10.6 6.5 3.5 1.3 1” x 36” 12” to 12.75” 147
USS60SQD25 25 16.5 11.2 7.3 4.5 1” x 36” 12” to 12.75” 185
30 foot Mounting height
USS60SQC30 30 4.1 1.4 – – 1” x 36” 12” to 12.75” 173
USS60SQD30 30 14.8 9 5 2.1 1” x 36” 12” to 12.75” 219
35 foot Mounting height
USS60SQD35 35 9.4 4.3 – – 1” x 36” 12” to 12.75” 252
Philips Pole Series 23

DAVIT ARMS
Single davit arm
Arms are designed to slip over a tenon on the pole and is secured by
two through bolts. For aluminum or concrete poles.
Standard features include:
• tapered arm 5” – 2 3 / 8” O.D. or 6” – 2 3 / 8” O.D.
• rotary sanded or thermoset polyester powder coated.
Arm reach
6”
2 3 / 8” tenon
Rise
6063T6 aluminum tube arm
.188 wall
Catalog Number
Configuration
Arm
Reach
(feet)
Rise
Taper
DV6 1A 6 7’6” 5” or 6” – 2.375”
DV8 1A 8 7’6” 5” or 6” – 2.375”
DV9 1A 9 9’6” 5” or 6” – 2.375”
24
Philips Pole Series

DAVIT ARMS
Double davit arm
Arms are designed to slip over a tenon on the pole and is secured by
two through bolts. For aluminum or concrete poles.
Standard features include:
• tapered arm 5” – 2 3 / 8” O.D. or 6” – 2 3 / 8” O.D.
• arms slip over tenon on pole and are secured by two 11 / 16” through bolts.
• bevel spacers welded to bracket. Both sides are drilled through the bracket and tied
together with 1 / 2” SS bolt, lockwashers and nut.
Arm reach
6”
Rise
Catalog Number
Configuration
Arm
Reach
(feet)
Rise
Taper
DV6 2 6 7’6” 5” or 6” – 2.375”
DV8 2 8 7’6” 5” or 6” – 2.375”
DV9 2 9 9’6” 5” or 6” – 2.375”
Philips Pole Series 25

TRU series BRACKETS
Aluminum tapered
truss arm brackets
Brackets of aluminum tapered tube and schedule pipe are supplied with
aluminum pole plate, designed for round pole mounting onto metal, wood
and concrete poles
Standard features include:
• fixed tenon 2 3 / 8” O.D. x 6” long
• rotary sanded or thermoset polyester powder coated
Arm reach
Rise
6063 T6 alloy arm/brace
Upper tube 3 1 / 2”
Lower tube 2 3 / 8”
Catalog Number
Arm
Reach
(feet)
Rise
(inches)
Degrees
Tube Size
upper
(inches)
Tube Size
lower
(inches)
Bracket
weight
(pounds)
Luminaire
Mounting Height
(feet)
TRU 8 8 39” 3 - 5 3.5 2.375” 43 pole height + 2.5
TRU 10 10 39” 3 - 5 3.5 2.375” 52 pole height + 2.5
TRU 12 12 39” 3 - 5 3.5 2.375” 61 pole height + 2.5
TRU 15 15 39” 3 - 5 3.5 2.375” 74 pole height + 2.5
26
Philips Pole Series

Aluminum pipe
truss arm brackets
PRE series BRACKETS
Brackets of aluminum schedule pipe and schedule pipe are supplied with
aluminum pole plate, designed for round pole mounting onto metal, wood
and concrete poles.
Standard features include:
• fixed tenon 2 3 / 8” O.D. x 6” long
• rotary sanded or thermoset polyester powder coated
Arm reach
Rise
6063 T6 alloy arm/brace
Upper tube 2 3 / 8”
Lower tube 2 3 / 8”
Catalog Number
Arm
Reach
(feet)
Rise
(inches)
Degrees
Tube Size
(inches)
Bracket
weight
(pounds)
Luminaire
Mounting Height
(feet)
PRE 6 6 45” 3 - 5 2.375” 24 pole height + 3
PRE 8 8 45” 3 - 5 2.375” 30 pole height + 3
PRE 10 10 45” 3 - 5 2.375” 37 pole height + 3
PRE 12 12 45” 3 - 5 2.375” 45 pole height + 3
Philips Pole Series 27

TER series BRACKETS
Tapered elliptical
brackets
Standard features include:
• fixed tenon 2 3 / 8” O.D. x 6” long
• rotary sanded or thermoset polyester powder coated
Arm reach
Rise
.6875”
10.8750”
9”
1.5”
diameter
.6785” x 1” slot
Catalog Number
Length
(feet)
Arm
Reach
(feet)
Degrees
Tube Size
(inches)
Wall
Thickness
(inches)
Bracket
Weight
(pounds)
Luminaire
Mounting Height
(feet)
TER4MA 4 2 3 - 5 3.5 0.125 8 pole height + 1
TER6MA 6 3 3 - 5 3.5 0.125 11 pole height + 2
TER6MA - MTO 6 3 3 - 5 4 0.188 16 pole height + 2
TER8MA 8 4 3 - 5 3.5 0.125 20 pole height + 3
TER8MA - MTO 8 4 3 - 5 4 0.188 26 pole height + 3
TER10MA 10 4 3 - 5 3.5 0.156 23 pole height + 3
TER12MA 12 4 3 - 5 3.5 0.156 30 pole height + 3
28
Philips Pole Series

Adjustable arm
round brackets
ADJ series BRACKETS
Adjustable brackets can be used on aluminum, steel, and wood poles. But the full
intent of the arm is to be used on wood poles, to compensate for the different
angles that a wood pole can produce.
Standard features include:
• arms are made from 2 3 / 8” O.D. and 1 5 / 8” O.D.
• mounting plate is drilled for 4 9 / 16” bolts.
• mounting hardware is not supplied
Arm reach
Rise
10.5”
9” .6875”
4.25”
Catalog Number
Arm
Reach
(feet)
Rise
(inches)
Tube Size
(inches)
S42 Base plate
ADJ2-S42 2 14.25 2.375”
ADJ4-S42 4 18 2.375”
ADJ6-S42 6 24 2.375”
ADJ8-S42 8 36 2.375”
ADJ2-S43 2 14.25 1.625”
ADJ3-S43 3 14.25 1.625”
9”
7.5” .6875”
ADJ4-S43 4 18 1.625”
ADJ6-S43 6 48 1.625”
3.375”
S43 Base plate
Philips Pole Series 29

TERC series BRACKETS
Clamp on arm
elliptical brackets
Elliptical arm is heat treated after tapering and welding to T6 temper.
Standard features include:
• elliptical arm is 3 1 / 2” O.D. x .125” wall. 6063 alloy tapered to 2 3 / 8” O.D.
• arm is attached to the mounting plate with a continous weld
• wiring hole is supplied in the mounting plate
• 2 matching clamps attach elliptical arms onto mounting plate that attaches
to pole
• clamps are secured with 4 1 / 2” x 13” bolts, washer, lock washer and nuts
• fixture loading is 75lbs. plus EPA approved pole
• mounting hardware not supplied
Arm reach
Rise
Catalog Number
Arm
Reach
(feet)
Rise
(inches)
Tube Size
upper
(inches)
Wall
Thickness
TERC4MA 4 2 3.5 .125
TERC6MA 6 3 3.5 .125
TERC8MA 8 4 3.5 .125
TERC10MA 10 4 3.5 .156
TERC12MA 12 4 3.5 .156
30
Philips Pole Series

Elliptical
mounting brackets
TERW series BRACKETS
Elliptical arm is heat treated after tapering and welding to T6 temper.
Standard features include:
• elliptical arm is 3 1 / 2” O.D. x .125” wall. 6063 alloy tapered to 2 3 / 8” O.D.
• arm is attached to the mounting plate with a continous weld
• wiring hole is supplied in the mounting plate
• bracket has 4 holes ( 9 / 16”) for bolts to be screwed into the wood pole
• fixture loading is 75lbs. plus EPA approved pole
• mounting hardware not supplied
Arm reach
Rise
.6875”
.75”
11.8750”
1.5”
diameter
Catalog Number
Arm
Reach
(feet)
Rise
(inches)
Tube Size
upper
(inches)
Wall
Thickness
.5625”
TERW4MA 4 2 3.5 .125
TERW6MA 6 3 3.5 .125
TERW8MA 8 4 3.5 .125
TERW10MA 10 4 3.5 .156
TERW12MA 12 4 3.5 .156
Philips Pole Series 31

Transformer bases
Transformer
bases
Standard features include:
• Transformer base supplied with door, screw, and washers.
• Hardware supplied to manufactured pole to base and base to foundation.
• Bases meet 1985 AASHTO breakaway requirements.
Catalog Number
Height
(inches)
Top
Width
(inches)
Bottom
Width
Top
Bolt Circle
(inches)
Bottom
Bolt Circle
(inches)
Bases
per skid
Door Width
(max. inches)
Door Height
(inches)
TB1-20 20 13.12 sq. 15.3750 sq. 11 - 13 13 - 15 27 9.75 13.5
TB1-20 modified 20 13.12 sq. 15.3750 sq. 11-13 10.5 - 12.9375 27 9.75 13.5
TB2-20 20 12.06 sq. 13.00 sq. 10 - 12 10 - 12 27 9.75 13.5
TB3-20 20 15.00 sq. 17.44 sq. 13 - 15.125 15 - 17.25 18 9.75 13.5
TB1-17 17 13.12 sq. 15.3750 sq. 10.5 - 13.5 13 - 15 36 9.75 11.75
TB1-17 modified 17 13.12 sq. 15.3750 sq. 10.5 - 13.5 10.5 - 12.9375 36 9.75 11.75
TB2-17 17 12.04 sq. 13.08 sq. 10 - 12 10 - 12 36 9.75 11.75
TB3-17 17 15.09 sq. 17.44 sq. 13 - 15.125 15 - 17.25 24 9.75 11.75
Base can be ordered with hinged door option or with plastic access door. When ordering, for hinged door, add suffix ‘’-H’’; for plastic door, add suffix ‘’-P’’.
Please contact your sales representative for additional options.
32
Philips Pole Series

Anchor bolts
Anchor bolts
Standard features include:
• hot dipped galvanized steel
• standard hardware - 2 hex nuts, 2 flat washers
• 12” minimum length of galvanized coating
• thread series UNC
Nominal Bolt diameter A
Number of threads per inch
B
12” min.
galvanized length
Catalog Number
Nominal Bolt
Diameter
(inches)
A
Number of
Threads
(per inch)
B
Bolt Straight
Length
(inches)
C
Hook Length
(inches)
D
Threaded
Length
(inches)
E
Weight
(pounds)
3
/ 4 x 27 0.75 10 24 3 6 4
1 x 36 1.00 8 33 3 6 8
1 1 / 4 x 48 1.25 7 44 4 6 17
Philips Pole Series 33

The performance benefits of aluminum poles
From a performance perspective, aluminum poles offer significant
advantages over other materials.
ALUMINUM
STEEL
FIBERGLASS
CONCRETE
Benefits
Rust free
Lighter weight, easier for installation
Lower life cycle costing
Proven longer life than steel
Recyclable with financial return
Can be direct buried
Easy removal from accident sites
Best breakaway performance
Strong
Initial cost
Can be direct buried
Initial cost
Lighter weight, easier for installation
Can be direct buried
Strength (EPA)
Never needs painting
Disadvantages
None
Weighs twice as much as aluminum
Visible rust and corrosion
Difficult painting over galvanization
Galvanization causes environmental problems
Should not be direct buried
Less breakaway performance
Color fades due to UV rays
Easily vandalized
Large luminaire deflection
Brittle when cold
Disposal causes environmental problems
Heavier than aluminum, difficult installation
Expensive shipping costs
Requires additional equipment
More hazardous than other materials
Less resistance to salt spray environments
No breakaway performance
No recyclable value
Removal from accident sites goes directly to landfill
34
Philips Pole Series

One Philips
Philips is a global company of leading businesses creating value with meaningful innovations that
improve the visibility of our roads and highways. With our collective passion, expertise, depth
and reach, we open up new possibilities powered by advanced technologies. Our innovative
approach to design solutions, ever-expanding range of product offering and flexibility of
service makes us an exceptional supplier in the aluminum pole and bracket industry. We are
determined to innovate, collaborate and provide unsurpassed value to our customers. We
don’t simply manufacture poles, we design solutions.
Philips Pole Series 35

Philips Roadway Lighting
10275 W. Higgins Road
Rosemont IL 60018
Tel: 847-390-5111 Fax: 847-332-0305
Customer Support/Technical Service: 847-390-5111
www.philips.com/roadwaylighting
A Division of Genlyte Thomas Group LLC
281 Hillmount Road,
Markham, Ontario
L6C 2S3
Canada
Tel: 416-223-7255
Customer Support/Technical Service: 416-223-7255
www.philips.com/roadwaylighting
© 2012 Philips Roadway Lighting
All rights reserved.
Document order number: USS100R02