to download an Accel DFI product catalog - efisupply.com

FUEL PUMPS, FILTERS AND FITTINGS
ULTRA-HIGH PERFORMANCE FUEL PUMPS
These pumps are designed for use with Nitrous, Supercharger,
Turbo or extreme Normally Aspirated applications that demand
extreme fuel flow at elevated pressures.
Universal In-Line 500#/hr @ 60PSI . . . . . . . . . . . . . . . .75709
(1000HP Naturally Aspirated or
840HP Forced Induction)
Universal In-Line 840#/hr @ 60PSI . . . . . . . . . . . . . . . .75710
(1680HP Naturally Aspirated or
1400HP Forced Induction) Alcohol
Compatible
75709 75710
74720
HIGH PRESSURE FUEL FILTER
Stainless steel, two-piece laser welded construction,ACCEL/DFI's
high-pressure fuel filters can withstand up to 100 psi. These
filters trap particles as small as 5 microns and
prevent contaminants from obstructing flow or causing fuel
injector leakage between pulses.
High Pressure Fuel Filter . . . . . . . . . . . . . . . . . . . . . . . . .74720
HIGH FLOW FUEL FILTER FITTINGS
Anodized in a rich gold, these fittings allow the highest flow rate
possible of any Saginaw fitting available. Complete with O-rings,
these fittings now accept both 6AN and 8AN fuel line.
74743H
High Flow 8AN Fuel Filter Fittings (2/set) . . . . . . . . . . .74743H
High Flow 6AN Fuel Filter Fitting . . . . . . . . . . . . . . . . .74721
74731
JUMPER LINES
The kit consists of three 12" long, 3/8" diameter steel tubes and
one 12" long, 5/16" diameter steel tube with the Saginaw flare
used in stock GM fuel injection systems. It allows direct
connection to TPI fuel rails and ACCEL/DFI's High Pressure
Fuel Filter.
Jumper Line Kit
(includes three 3/8" of one 5/16" lines) . . . . . . . . . . .74731
3/8” Jumper Line Only . . . . . . . . . . . . . . . . . . . . . . . . . .74731A
5/16” Jumper Line Only . . . . . . . . . . . . . . . . . . . . . . . . .74731B
216