Gardner Denver.pdf - inducom

More documents

Recommendations

Info

Air Powered Hand Lancing Tools FS Drive Swivel Coupling Air Motor For unplugging and polishing difficult tubes Lance Adaptor Lance & Lance Tips sold separately Lance Adaptor HI Swivel SA 2000, 2012 SA 1900, 1909 Drive Coupling Air Motor Specifications Quick setup for small bundles Compact for use in congested areas More productive and thorough than non-rotary lancing Lance Adaptor Assemblies 15,000 psi Systems Model SA-1900 SA-2000 SA-1909 SA-2012 Max. Pressure 15 Kpsi 15 Kpsi 20 Kpsi 20 Kpsi Flow Capacity 20 gpm 60 gpm 20 gpm 50 gpm Swivel HI-P6P6 FS-P8K HI-A9A9 FS-A12K Rotation 100-400 rpm 100-300 rpm 100-400 rpm 100-300 rpm Inlet Port 3/8 npt 1/2 npt 9/16 MP 3/4 MP Air Supply 60-100 psi 70-100 psi 60-100 psi 70-100 psi 30 CFM 40 CFM 30 CFM 40 CFM Weight 12 lb 20 lb 13 lb 22 lb Service Kit HI 600 FS 600 HI 600 FS 600 Overhaul kit HI 610 FS 610 HI 610 FS 610 20,000 psi Systems Lance Thread SA 1900 SA 2000 Thread SA 1909 SA 2012 1/4” OD 1/4 x 28 SA 056-P6S4 NA 1/4 MP AF 073-M4M9 NA MP Tubing GP 075-250, 076 AF 072-M4, 071-M4 3/8” OD 1/8 npt SA 056-P6P2 FS 025-KP2 3/8 MP AF 073-M6M9 NA MP Tubing GP 075-375, 076 GP 076-375, 076 AF 072-M6, 071-M6 9/16” OD 1/4 npt SA 056-P6P4 FS 025-KP4 9/16 MP AF 073-M9M9 FS 020-KA9 MP Tubing GP 075-562, 076 GP 075-562, 076 AF 072-M9, 071-M9 AF 072-M9, 071-M9 3/4” OD NA NA 3/4 MP NA FS 020-KA12 MP Tubing AF 072-M12, 071-M12 1” OD NA NA 1 MP NA FS 020-KA16 MP Tubing AF 072-M16, 071-M16 1/8 Sch 80 1/8 npt SA 056-P6P2 FS 025-KP2 NA NA Pipe GP 075-405, 076 GP 075-405, 076 1/4 Sch 80 1/4 npt SA 056-P6P4 FS 025-KP4 Pipe GP 075-547, 076 GP 075-547, 076 3/8 Sch 160 3/8 npt GP 052-P6P8 FS 020-KP6 Pipe 1/2 Sch 160 1/2 npt GP 052-P6P8 FS 020-KP8 Pipe Durango, Colorado Phone 970-259-2869 www.stoneagetools.com FAX 970-259-2868 Page 30 © 10/03
Select the right tip for your job: Specifications TD Tips Go to Work • Buy tip 1/8 in. smaller diameter than tube ID to minimize “hydraulicing” • Buy TC Tip for powerful unplugging • Buy CD Tip for unplugging and polishing • Buy TD Tip for economy and versatile jet patterns TC Lance Tip Unplugging heavy deposits, Maximum jet hitting power .5- 1.0 in. (12-25 mm) OD Single 8° Carbide Nozzle No Carbide Cutter CD Lance Tip For removal of hard plugs from heat exchanger tubes .31- 1.62 in. (8-41 mm) OD Drilled Jets, Carbide Cutter Jet Styles Available: • 1 @ 5°, 15°, 2 @ 135° • 1 @ 5° & 15° CD 012-M9 Tip Body 3/8 in. 7/16 in. 1/2 in. 5/8 in. 3/4 in. Diameter 9.5 mm 11.1 mm 12.2 mm 15.9 mm 19.0 mm Low Pressure TC 012-M9 Body OC Orifice Insert TC 010-P4 Body 15 Kpsi 1030 bar MAWP TD 012-M9 Tip TD Lance Tip For economy and versatility .5- 1.0 in. (12-25 mm) OD Drilled Jets No Carbide Cutter Jet Styles Available: • 1 @ 10°, 20°, & 30°, 2 @ 135° • 1 @ 10°, 20°, & 30° • 2 @ 45°, 2 @ 135° • 2 @ 60° • 2 @ 90° CD 006-S4 CD 007-S6 CD 008-P2 CD 010-P4 CD 012-P4 TD 006-S4 TD 007-S6 TD 008-P2 TD 010-P4 TC 008-P2 TC 010-P4 Lance 1/4” OD 3/8” OD 1/8” Pipe 1/4” Pipe 1/4” Pipe Threads 1/4x28 3/8x24 1/8 npt 1/4 npt 1/4 npt Lance Tips CD 012-P4 Tip TD 010-P4 Tip Medium Pressure 20 Kpsi 1380 bar MAWP - Right-Hand MP Threads CD 006-S4 CD 007-M6 CD 008-M6 CD 012-M9 TD 006-S4 TD 007-M6 TD 008-M6 TD 012-M9 TC 008-M6 TC 012-M9 Lance 1/4” MP 3/8” MP 3/8” MP 9/16” MP Threads 1/4x28 3/8x24 3/8x24 9/16x18 High Pressure 40 Kpsi 2760 bar MAWP - Right-Hand HP Threads TD 008-H6 TD 012-H9 Lance 3/8” HP 9/16” HP Threads 3/8x24 9/16x18 Lance Selection for Maximum Power Jet for flows (gpm) no greater than: Lance 1/4 3/8 9/16 1/4 3/8 9/16 1/8 1/4 HP HP HP MP MP MP Sch 80 SCH 80 15 ft. 3.1 9.0 24 4.4 20 60 20 50 25 ft. 2.4 6.8 18 3.4 16 45 16 35 35 ft. 2.1 5.8 16 2.9 14 40 14 30 © 10/03 Durango, Colorado Phone 970-259-2869 www.stoneagetools.com FAX 970-259-2868 Page 31
Page 2 and 3: Waterjet Basics - Delivering Power
Page 4 and 5: Waterjet Safety - A Summary The pla
Page 6 and 7: BARRACUDA TM Self-Rotating Nozzle
Page 8 and 9: DBUH Ultra High Pressure Deck Blast
Page 10 and 11: SG-40, 50, 60, 70 Powered Rotation
Page 12 and 13: BADGER 2D Self-Rotating Nozzle Beca
Page 14 and 15: RJV 2D Self-Rotating Nozzle Clean p
Page 16 and 17: BJV 2D Self-Rotating Nozzles Model
Page 18 and 19: Pipe Centralizers Positioning devic
Page 20 and 21: Line Mole Backout Preventers Safe L
Page 22 and 23: WARTHOG TM Rotary Sewer Nozzles Pat
Page 24 and 25: WEASEL, FERRET, & MARTEN 2D Tube No
Page 26 and 27: HRS Air-Powered Hose Reel The HRS e
Page 28 and 29: Rigid Tube Lancing Systems BRLM 300
Page 32 and 33: Rigid Lances Equip your Lancing Sys
Page 34 and 35: 3D No-Entry Vessel Cleaning OSHA Re
Page 36 and 37: 3D Nozzle Accessories HC 088 Extens
Page 38 and 39: Boiler, Furnace, Big Tank Cleaning
Page 40 and 41: CST Cable Swivel Tool Hollow shaft
Page 42 and 43: CDA Concrete Demolition Attachment
Page 44 and 45: Swivel Selection Guide The broadest
Page 46 and 47: SH Swivel Specifications Model Don
Page 48 and 49: OC Tungsten Carbide Tips OCIH - 1/4
Page 50 and 51: Extension Nipples Precision-machine
Page 52 and 53: AF 072 Anti-Vibe Gland AF 073 Coupl
Page 54 and 55: Lubricants, Etc. Air Motors Gast 4A

Gardner Denver.pdf - inducom

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?