tools and maintenance - Eriks UK

179 

tools and maintenance 

43390 Eriks Catalogue DPS Eriks version:12561 MRO Ad A4 AW 17/2/12 10:31 Page 2 

See pages 213-214 


See page 183 


More innovation from 

New Health & Safety products for: 

■ Threadlocking ■ Thread Sealing ■ Gasketing ■ Retaining 

Quick 

Loctite ® 2400 

Medium Strength Threadlocker 

reference 

• Resists vibration loosening 

• Threads are completely sealed 

For general purpose threadlocking. 

Parts can be dismantled with normal 

hand tools. Locking fasteners on 

pumps, motors, gearboxes, presses 

etc. at temperatures up to 150°C. 

Hand Tools 


Thread Sealant 

• Course Pipe Threads 

• Instant seal 

Suitable for sealing air line fittings, 

boiler fittings and any other 

applications 183, using191 

coarse metal 

threaded fittings up to 3”BSP. Instant 

seal achieved on taper parallel joints. 


High Strength Threadlocker 



For fasteners that do not need 

dismantling. Stud locking on all types 

of machinery e.g. engines, gearboxes, 

pumps, conveyors, vibrating screens 


Storage 


Flange Sealant 

• One product for any shape or size gasket 

• Seals scored or damaged rigid flanges 

Replaces traditional gaskets. This general 

purpose flange sealant fills scratches 

and gouges 184-185 

up to 0.5mm deep on metal 

flanges. Maximum operating temperature 

up to 180°C. 

Cloths 

186 

See page 199 

See page 202 

Loctite Adhesives 

® 6300 

Retaining Compound 

• High temperature 

• High strength 

For bonding cylinder liners, 

pump impellors, bushes and other 

applications that are subjected 

to operating temperatures 

up to 175°C. 

187-188 

Gloves 

• Help improve your 

safety at work, while 

maintaining exceptional 

performance. 

• “White” material safety 

data sheet with no hazard symbols, 

no risk and no safety phrases. 

189-190, 

195, 196 

• Entries not required in section 

2, 3, 15 & 16, therefore no need 

for a COSHH assessment. 

Safety Glasses, 

Goggles and 

Eyewear 

192, 197 

See page 186 

Respiratory 

Safety 

Footwear 

For further details contact your local ERIKS Service Centre 

on 0845 006 6000 or visit www.eriks.co.uk 

Power 

Tools 


193 

194 

198 

The Varta Indestructible Torch Range 

As See good pages as 215-217 unbreakable 

(see www.built-to-survive.com to see for yourself) 

Drill Sets, Taps 

and Bits 

Multipower 

Multipliers 

Line Marking 

Rain, See heat, pages cold, dirt, 204-208 hard knocks, crushing - the torches of the Varta Indestructible range stand up to even the 

hardest of endurance tests. Let your customers discover this entirely new generation of torches! The distinctive 

specially hardened aircraft aluminium and rubber industrial 199design, 3 year guarantee and wide choice 200 of models 

add even more to the outstanding qualities of the range. 

201 

The Indestructible Range is uniquely resilient with extremely powerful beams making it the ideal work partner. 

See pages 201, 206, 211-212 

See page 182 

LED x5 

Indestructible 

Headlight 3AAA 


Safe drop height 

9m 

Light output 

High: 35 lumens 

Low: 11 lumens 

Beam range 

High: 24 m 

Low: 15 m 

Run time 

High: 19 h 

Low: 40 h 

See page 191 

1W LED 


Headlight 3AAA 


9m 

Light output 



Beam range 

High: 100 m 

Low: 60 m 

Run time 

High: 3 h 

Low: 15 h 

1W LED 


Light 3AAA 


9m 

Light output 



Beam range 

High: 160 m 

Low: 70 m 

Run time 

High: 5 h 

Low: 40 h 

Torches 

202 

1W LED 


Light 2AA 

Food 


Industry 

9m 

Lubricants 

Light output 



Degreasers and 

Lubricants 

203, 205-210, 

213-214 

Testing 

Equipment 

Beam range Beam range Beam range 

211-212 215-217 

High: 150 m 

Low: 56 m 

Bearing 

Greases 

204 

Run time 

Run time 

Run time 

High: Visit 15 h us at eriks-techdirect.co.uk 

High: 38 h 

High: 20 h 

Low: 35 h 

3W LED 


Light 3C 


9m 

Light output 



High: 140 m 

Low: 85 m 

Low: 85 h 

3W LED 


Light 4C 


4m 

Light output 



High: 350 m 

Low: 195 m 

Low: 78 h 

to find your local Service Centre 

tools and 

maintenance

180 

Tools and Maintenance 


TechKnowledgey 

ERIKS Tools and Maintenance Core Competence Centre are able to provide our customers 

brand leaders in all of its 3 main product areas - Safety, Tooling and Consumables. 

Choosing the right tools and maintenance equipment is not just about getting the job done 

more efficiently; it is also about protecting employees from the risk of 

injury and protecting their employers from potential compensation claims. 


Safety 

n PPE 

n Signage 

n Working environment 

n Janitorial 

Tools 

n Hand Tools 

n Power Tools 

n Cutting Tools 

n Abrasives 

n Measuring Tools 

n Specialist Fitting Tools 

An analysis 

of working 

conditions and 

assessment of 

risks make it 

possible to 

define the types 

of equipment that 

should be used 

Consumables 

n Lubrication 

n Adhesives/Sealants 

n Welding equipment 

n Fasteners 


maintenance 

Go 

To your Local Service Centre

181 

martindale electric 

PSI4000 Phase Rotation Indicator 

The Martindale PSI4000 is a unique phase 

rotation indicator that works via inductive 

crocodile clips. This increases the safety 

of the user and the bright LEDs give 

a clear indication of clockwise or 

anti-clockwise rotation. 

RX ® PPE 

See page 218 

RX ® Personal Protective Equipment 

he use of the correct Personal Protection 

Equipment at work is essential. The working 

environment and conditions determine the most 

appropriate protection in order to guarantee the 

safety of employees. 

In the new RX ® PPE catalogue all the functionalities 

and characteristics of the RX ® PPE range are 

explained.as wellas the correct use of RX ® PPE. 

A great deal of attention has gone into ergonomics 

and design – without compromising on quality. 

This means end-user acceptance is high, and 

compliance with company’s PPE policy is assured. 

SUSTAYN 

See page 180 

SUSTAYN Sorbents by Spilfyter 

To compliment our high quality RX Perform range of pads, rolls, and 

socks, and as an alternative to the now discontinued RX Greenline 

range, we are pleased to announce the addition of the SUSTAYN range 

of high quality sorbents to our product offering for those customers 

looking for a more ‘Eco Friendly’ option for their spill control needs. 

The SUSTAYN range of sorbents is the first sorbent product on the 

market is made from 100% recycled Meltblown Polypropylene, which 

may previously have been sent to landfill . 

Additionally, all the cardboard boxes are made from 100% 

post-consumer recycled corrugate, printed using environmentally 

friendly, water-based printing inks. 

Adsorption rates, and pricing is very similar to the 

RX Perform products. 

See page 185 

Visit us at eriks-techdirect.co.uk 




» SOURCE REDUCTION: 

» Sustayn sorbents are made from 100% recycled material – planet friendly 

» All corrugate packaging is 100% post consumer recycled corrugate with environmentally friendly water-based 

printing inks. Poly-bags used for sorbent rolls are 100% recycled and use 33% less poly 

» Sustayn pads and rolls are perforated; allowing you to use what you need, further reducing usage and waste 

» FEATURES AND BENEFITS: 

» Sustayn sorbents perform as good or better than the leading sorbent product produced from virgin raw materials 

» Sustayn universal pads, rolls are black in colour; easily hiding unsightly spills – they always look clean 

» Oil-only sorbent pads, rolls are beige in colour – with great performance 

» Sorbent socks use 100% recycled material filler – with same great performance 

CODE 

WEIGHT 

TYPE 

COLOUR 

BRIEF DESCRIPTION 

WIDTH 

(CM) 

LENGTH 

(CM/M) 

PACK 

COUNT 

ADSORBENCY 

(LITRE) 

SUSTUSR70 

SUSTUSR75 

SUSTUSR90 

SUSTUSR91 

SUSTUSG30 

SUSTUSG37 

SUSTOSR70 

SUSTOSR75 

SUSTOSR90 

SUSTOSR91 

SUSTOSW30 

SUSTOSW37 

Light-Weight 

Heavy-Weight 

Heavy-Weight 

Heavy-Weight 

N/A 

N/A 

Light-Weight 

Heavy-Weight 

Heavy-Weight 

Heavy-Weight 

N/A 

N/A 

Universal 

Universal 

Universal 

Universal 

Universal 

Universal 

Oil-Only 

Oil-Only 

Oil-Only 

Oil-Only 

Oil-Only 

Oil-Only 

Black 

Black 

Black 

Black 

Gray 

Gray 

Natural 

Natural 

Natural 

Natural 

White 

White 

100% Recycled Fibre Perforated Pad 


100% Recycled Fibre Perforated Roll 


100% Recycled Fibre Sock 


100% Recycled Fibre Pad 






41 

41 

81 

41 

7.6 

7.6 

41 

41 

81 

41 

7.6 

7.6 

46 

46 

45 

45 

1.2 

3 

46 

46 

45 

45 

1.2 

3 

200/Case 

100/Case 

1/Bag 

2/Bag 

15/Case 

6/Case 

200/Case 

100/Case 

1/Bag 

2/Bag 

15/Case 

6/Case 

108 

101 

201 

201 

85 

84 

108 

101 

201 

201 

85 

84

183 

Bahco ERGO Side Cutter 

Bahco have been manufacturing pliers since 1856; this is something no other 

big player in the pliers business can claim. For over 150 years Bahco have refined and 

improved the steel alloy used on side cutting pliers, by adjusting the exact quantities 

of carbon and chrome, in order to strike the perfect balance between resilience and 

toughness, which are crucial for the long life of these tools. For over a century and a half, 

they have tried and tested different manufacturing processes, continuously innovating 

and investing in new machinery. 

The improved Bahco ERGO side cutting pliers come in 2 different assortments; Bahco 

ERGO side cutting pliers 2101 side cutting pliers for electricians and Bahco ERGO 

heavy duty side cutting pliers 21HD. 

Both of them come with these features 

n Head without sharp edges 

n Screw joint improving cutting accuracy 

n Patented on/off spring function 

n Mini shoulders securing the thumbs 

from sliding into the head without 

compromising accessibility 

n Optimal shank width for maximum force 

n Bi-material handles 

Bahco ERGO Side Cutting Pliers 

for Electricians 

The Bahco ERGO Side Cutting Pliers 2101 for electricians 

have a progressive edge that cuts soft thin wire close to 

the tip and hard wire close to the screw. 

n High performance alloy steel 

n Edges induction hardened 

at 62 HRC 

n Standard black 

finish 

Bahco 21HDG Heavy Duty ERGO 

Side Cutting Pliers 

The Bahco ERGO Heavy Duty Side Cutting Pliers 

21HD are equipped with an extra sturdy head that 

provides a strong cut all over the blade; it cuts for 

example a piano wire of up to 3mm. 

n High performance alloy steel 

n Edges induction hardened at 64 HRC 

n Slim shape to reach confined spaces 

n Standard black finish 

Part number Length (mm) Cu (mm) Fe+ (mm) Piano (mm) 

BAH2101G-125 125 3.5 1.8 1.6 

BAH2101G-140 140 3.7 2.0 1.8 

BAH2101G-160 160 3.8 2.5 2.0 

BAH2101G-180 180 4.0 2.7 2.3 

Part number Length (mm) Fe+ (mm) Piano (mm) 

BAH21HDG-140 140 2.2 2.0 

BAH21HDG-160 160 2.5 2.3 

BAH21HDG-180 180 2.7 2.5 

BAH21HDG-200 200 3.2 3.0 

Spring Function 

The On-Off return spring increases 

ease of cutting with an automatic 

opening of the jaws. For transport 

or storage, the spring 

function can be 

safely deactivated 

when not in use. 

Heavy Duty 

The heavy duty cutting edge 

provides a sturdy cut all over 

the blade. The reinforced 

metal frame has been designed 

to withstand extreme conditions 

and hold up extra hard wires. 

Progressive 

Bahco has 2-in-1 pliers 

with progressive edges 

that cut both soft cables 

and hard wires. 





184 

Storage 

Heavy Duty Cabinet 

n Heavy duty construction – up to 1 tonne capacity 

n Centrally lockable with drawer blocking 

n 75kg U.D.L. capacity, 100% extension drawers 

n Durable epoxy powder coat finish 

n Divider kits available, please ask for details 

n 650mm wide x 650mm deep x 800mm high 

Order Ref. drawers (Qty x Front Height mm) 

40019035.11V 2x 100, 2x 150, 1x 200 

Cabinet shown with optional divider kit 

Heavy Duty Cupboard 

n Heavy duty construction – up to 1 tonne capacity 

n Lockable steel doors with perfo liner panels 

n 25mm multiplex shelf 

n Galvanised steel shelf with 100kg capacity 

n 75kg U.D.L. capacity roller bearing drawers 

n Perfo and louvre backpanels with hook 

and bin kits included 


Part No Worktop Shelves Drawers 

15200231 1 1 4x 125 

Heavy Duty Framework Bench 

Multiplex (mpx) Resin bonded, layered 

beech ply. A tough worktop suitable for 

most applications. 

n Heavy duty – up to 800kg U.D.L. capacity 

n 40mm thick multiplex worktops 

n Optional suspended cabinets available 

n Durable epoxy powder coat finish 


Order Ref. 

41003082.16V 



Know-How 

Specialist Technical Centres

185 

Vertical Louvre Panels 

n For use with hook on bins 

n Flanged to aid rigidity 

n Epoxy powder coated finish 

Perfo Panels 

n For use with perfo hook kits 

n Fully flanged and reinforced 

to aid rigidity 

n May be used side by side 

or end to end, horizontally 

or vertically 

n Reinforced mounting points 

n Epoxy powder coat finish 

Order Ref. Width Height 

14025115.11 495 457 

14025117.11 990 457 

14025118.11 1486 457 

14025119.11 1981 457 

Order Ref. Width Height 

14025147.11 457 495 

14025148.11 457 990 

14025149.11 457 1486 

14025240.11 457 1981 

4x 990mm panels shown with optional 40 piece hook kit 

Hook Kits 

n Ideal for hand tools 

n Durable zinc plated finish 

n Safety end cap on all hooks 

n Quick fix perfolock, reposition at will 

n Supplied as easy to order kits 

Order Ref. Hooks Usage /Approx 

Panel Area M2 

14031411 15 0.50 

14031412 20 1.00 

14031414 40 1.75 

14031415 60 2.75 

14031416 80 4.00 

Bins 

n Quality rigid bins with reinforced sides 

n Resistant to most acids, alkalis, 

greases and oils 

n Resistant to temperatures 

from –35°C to +80°C 

n Stackable and suitable 

for roller conveyors 

n Manufactured from high 

density polyethylene 

n Blue is food grade 

n Label included 

Bins are supplied in kit quantities only, No.5 bins are for shelf use only 

Item W x D x H (mm) Litre Kit Qty 

No.1 103 x 90 x 55 0.40 24 

No.1b 103 x 120 x 62 0.75 24 

No.2 103 x 165 x 83 1.00 24 

No.3 145 x 240 x 125 3.50 24 

No.4 207 x 345 x 165 10.00 12 

No.5 303 x 485 x 190 30.00 6 

Item Green Blue Red Yellow 

No.1 13031016 13031017 13031018 13031019 

No.1b 13031130 13031131 13031132 13031133 

No.2 13031026 13031027 13031028 13031029 

No.3 13031036 13031037 13031038 13031039 

No.4 13020422 13020417 13020432 13020412 

No.5 13020423 13020418 13020433 13020413 





186 Cloths 

Industrial Cloths 

Helping you to reduce waste and improve your productivity 

The reusable WYPALL* X Cloths are absorbent and solvent 

resistant and strong enough to tackle tough tasks, whilst also 

designed to be cost and time efficient. Reliable wipers that 

keep their shape and can be used again and again: 

n Highly absorbent – can mop up spills, clean hands and wipe 

down machinery quickly 

n Strong and durable when wet and dry – ideal for tough tasks 

such as machinery cleaning 

n Resistant to most solvents – ideal for applying solvents to a 

surface or cleaning down 

n Contain no adhesives or binders, reducing surface residue 

Improving Efficiency 

Our Heavy 

Duty Wipes 

weigh 5x less than standard 

rags, creating 37% less waste 

(by weight) on disposal 

37 % 

LESS 

Poor performing products and unreliable dispensing can 

increase waste and consumption. Our wiper products feature 

smart packaging solutions and considering your consumption, 

they are designed to reduce the amount you dispose of. With 

our manufacturing heritage, we understand only too well how 

critical it is to find ways to reduce costs and improve margins. 

All of this saving you time and helping you reduce costs. 

By working together, we can help to optimise your wiping 

effectiveness whilst reducing costs and waste levels. 

reduce 

time waste 

reduce 

paper waste 

reduce 

storage waste 

WYPALL* X80 Cloths 

Strong, bulky cloths, for tough maintenance and wiping tasks. 

Fast, high absorbency coupled with great tear resistance strength. 

WYPALL* X80 Cloths are a perfect replacement for rags: 

Ideal for: 

n Heavy duty machine and 

part wiping – Cleaning rough 

surfaces without breaking up 

n Maintenance tasks – Wiping 

away grease, oil and 

absorbing heavier soiling 

n High Capacity - Large Roll 

format can give the same 

number of wipes as up to 

50kg of standard rags* 

WYPALL* X60 Cloths 

Versatile and durable, for precision wiping. Created for light duty, 

general purpose wiping tasks, including glass cleaning. 

Ideal for: 

n Applying lubricants and 

precision cleaning 

n Reaching tight creases 

and wiping down intricate 

machinery parts 

n Removing dirt, oil and debris 

n Cleaning final assembly parts 

n High Capacity - Large Roll 

format can give the same 

number of wipes as up to 

50kg of standard rags* 

Part No 

description 

Part No 

description 

W34A-24496 

WYPALL* X80 Cloths Blue – Large Roll – 475 Sheets per roll 

W34A-24484 

WYPALL* X60 Cloths Blue – Large Roll – 500 Sheets 

W34A-24813 

WYPALL* X80 Cloths Blue – POP UP Box – 80 Sheets per box 

W34A-24814 

WYPALL* X60 Cloths White – POP UP Box – 126 Sheets 

* based on an average of 10 rags per kilo * based on an average of 10 rags per kilo 



Go 


Lubricants 

More innovation from 

New Health & Safety products for: 

■ Threadlocking ■ Thread Sealing ■ Gasketing ■ Retaining 


Medium Strength Threadlocker 



For general purpose threadlocking. 

Parts can be dismantled with normal 

hand tools. Locking fasteners on 

pumps, motors, gearboxes, presses 



Thread Sealant 

• Course Pipe Threads 

• Instant seal 

Suitable for sealing air line fittings, 

boiler fittings and any other 

applications using coarse metal 

threaded fittings up to 3”BSP. Instant 

seal achieved on taper parallel joints. 


Retaining Compound 

• High temperature 

• High strength 

For bonding cylinder liners, 

pump impellors, bushes and other 

applications that are subjected 

to operating temperatures 

up to 175°C. 


High Strength Threadlocker 



For fasteners that do not need 

dismantling. Stud locking on all types 

of machinery e.g. engines, gearboxes, 

pumps, conveyors, vibrating screens 



Flange Sealant 

• One product for any shape or size gasket 

• Seals scored or damaged rigid flanges 

Replaces traditional gaskets. This general 

purpose flange sealant fills scratches 

and gouges up to 0.5mm deep on metal 

flanges. Maximum operating temperature 

up to 180°C. 

POSITIVE 

ENERGY 

REDUCTION 

• Help improve your 

safety at work, while 

POSITIVE 

POLLUTION 

maintaining REDUCTION exceptional 

performance. 

• “White” 

POSITIVE 

material safety 

WASTE 

REDUCTION 

data sheet with no hazard symbols, 

no risk and no safety phrases. 

POSITIVE All Loctite products come with a COSHH 

• Entries RISK not (control required of substances inhazardous section to health) 

REDUCTION certificate ensuring user is safe at all times. 

2, 3, 15 & 16, therefore no need 

for a COSHH assessment. 

For further details contact your local ERIKS Service Centre 

on 0845 006 6000 or visit www.eriks.co.uk

189 

HyFlex ® 11-618 

Ideal applications: light assembly, 

final assembly, finishing works, 

maintenance engineers. 

n An ultra-lightweight glove 

maximising touch and precision 

n Outstanding comfort 

n Lightweight applications in dry 

environments 

n Blue nylon liner with black 

polyurethane coating 

n EN388 3.1.2.1 

Part No 

11-618 

TouchNTuff ® 92-600 

Ideal applications: chemical handling, laboratory 

analysis, pharmaceuticals, paint and spray shops, 

printing industry, electronics, light assembly tasks, light 

assembly of oil-coated pieces, glass manufacturing, 

handling of cytostatics, intricate parts handling. 

n Advanced nitrile disposable glove 

n Four times the puncture resistance of natural-latex 

gloves 

n No natural rubber proteins, which means no risk of 

Type I allergies 

n Primary skin irritation studies and Insult Patch tests 

have also shown no evidence of risk from irritation or 

allergic contact dermatitis. 

n Easy donning and 

strong grip in wet or 

dry conditions. 

n The glove is highly 

versatile and suitable for 

many different uses 

n Powder free 

n EN374 

Sol-Vex ® 37-675 

Ideal applications: chemical processing and preparation, 

refining – oil and petrol, metal fabrication, agrochemicals, 

printing industry. 

n Sol-Vex ® nitrile gloves 

are the ideal choice 

for safe handling in 

a wide range of work 

environments where 

harsh chemicals are 

present. 

n Cotton-flock liner offers 

exceptional comfort for 

the wearer. 

n Sand patch grip design 

n 38mm thickness, 

330mm length 

n EN388 4.1.0.1 EN374 JKL 

Part No 

37-675 

TNT ® Blue 92-670 

Ideal applications: laboratory analysis, chemical industry, 

emergency services, electronics, intricate parts handling. 

n Outstanding chemical and mechanical properties, 

comfort and dexterity 

n Three times the puncture resistance of latex or PVC 

disposable 

n 100% nitrile; no waxes, silicone or plasticizers 

n Powder-free 

n Textured finish 

on fingertips. 

Improved grip 

n Rolled cuff 

provides added 

protection at wrist 

and ensures a 

secure fit 

n EN374 

Part No 

92-600 

Part No 

92-670 





190 

Gloves 

HyFlex ® 11-818 

NEW! 

Ideal applications: light assembly, final assembly, finishing 

works, maintenance engineers. 

n An ultra-lightweight glove with barehand feel, offering 

breathability, comfort and enhanced fingertip sensitivity 

for precision tasks. 

n FORTIX nitrile foam coating lasts up to three times 

longer than comparable coatings, extending glove life 

and reducing total cost of ownership 

n Ansell ZONZ ® Comfort Fit technology matches natural 

hand contours for improved support, breathability and 

range of movement 

n Enhanced grip in dry/slightly oily environments 

n Silicone-free 

material means no 

transfer of silicone 

contaminants 

n 18g blue nylonspandex 

liner with 

blue FORTIX nitrile 

foam coating 

n EN388 4.1.3.1 

HyFlex ® 11-840 

NEW! 

Ideal applications: light assembly, final assembly, finishing 

works, maintenance engineers. 

n Extreme durability and superior fit for precision handling 

in abrasive applications 

n FORTIX nitrile foam coating lasts up to three times 

longer than comparable coatings, extending glove life 

and reducing total cost of ownership 

n Matching the natural contours of the hand, the 

snug, second-skin liner is tailored to create a more 

comfortable wearing experience: at the base of the little 

finger (added comfort), across the fingertips (superior 

tactility), and through the palm (greater dexterity). 

n Enhanced grip in dry/slightly oily environments 

n Silicone-free material 

means no transfer of 

silicone contaminants 

n Grey nylon-spandex liner 

with black FORTIX nitrile 

foam coating 

n Ideal solution for workers 

who move between tasks 

n EN388 4.2.3.1 

Part No 

11-818 

Part No 

11-840 

Improve safety, increase productivity 

and maximise return on PPE investment 

As an expert at adapting new technologies to solutions 

that make our customers safer and more productive, 

Ansell understands like no other company that 

performance and profitability go hand in hand. That’s why 

we developed Ansell Guardian. 

Ansell Guardian ® is a unique suite of management tools 

helping companies to improve safety while simultaneously 

developing new perspectives for increased productivity 

and substantial cost of ownership savings. 

Ansell Guardian ® offers a customized, personal approach 

to maximizing return on a company’s personal protective 

equipment investment. In a systematic and quantifiable 

way, Ansell Guardian ® addresses many of the areas 

that are important to our customers. Ansell Guardian ® 

works within several unique areas of cost savings and 

productivity improvement. 

Ansell Guardian ® is a methodology for analysing these 

key areas and then integrating them into an easy-tounderstand 

optimization plan. 

For further details, contact your local ERIKS 

Service Centre on 0845 006 6000 or visit eriks.co.uk 



Know-How 


[ 

Does it all. Better. 

PATENTED FASTENER 

HOLDING FUNCTION 

UNIQUE STOP PLATE 

PREVENTS SLIPS 

TEETH GRIP AND TURN 

EVEN RUSTED BOLTS 

DOUBLE-HEX DESIGN 

REDUCES RETURN ANGLE 

NEWLY EXTENDED 

2013 JOKER RANGE! 

The JOKER range has been 

expanded, now including 

metric fill-in sizes, imperial 

options and several new sets. 

The combination ratchet wrench is one of the 

most commonly owned tools in the UK. Most 

professionals own at least one. Despite this, 

they received very little design innovation 

from tool manufacturers for several decades. 

Screw-driving specialist Wera realised the 

was awkward, time-consuming 

and 

potentially dangerous. But 

the JOKER changed all this! 

The revolutionary JOKER boasts 

several 

unique features which 

make 

use easier. The steel plate on 

the open end of the spanner, for example, 

adds incredibly useful functions. 

These include the ability to hold bolts or nuts, 

ideal for areas with tricky access, and a set of 

teeth which bite into rusty bolts. 

Another problem that plagued traditional 

spanner use is the way they slip off the 

bolt head before & during turning. The user 

tended to place a thumb on top, holding 

it in place. On the JOKER, the metal plate 

forms a unique ridge that prevents the slips. 

A obvious answer to a irritating problem! 

The manufacturing quality and materials used 

are superb, ensuring a long service life and 

reliable use. This tool makes everyday jobs 

simpler and quicker, keeping productivity 

high whilst making use a pleasure. 

For users who already have a 

4pc set, the 8pc set provides 

a great way to get your hands 

on the full range without 

needing the new 11pc option. 

An imperial 8pc 

set is also 

now available. 

Metric sizes retain the black 

stop-plate, imperial sizes 

feature a lighter grey variant. 

Code 

WER73268 

WER73270 

WER73271 

WER73272 

WER73273 

WER73274 

WER73275 

WER73276 

WER73277 

WER73279 

Description 

JOKER Spanner 8mm 










Code 

WER73290 

WER20011 

WER20013 

WER20012 

Description 

4pc Starter Set 

10mm, 13mm, 17mm, 19mm 

8pc Range Top-up Set 

8mm, 10mm, 11mm, 12mm, 

14mm, 15mm, 16mm, 18mm 

11pc Full Range Set 

8mm, 10mm, 11mm, 12mm, 

13mm, 14mm, 15mm, 16mm, 

17mm, 18mm, 19mm 

8pc Imperial Set 

- Includes x1 5/16”, 3/8”, 

7/16”, 1/2”, 9/16”, 5/8”, 

11/16”, 3/4” 

[ 

Added bonus: the Joker is ideal 

[for use as a pipe union spanner 

Scan this with your smartphone 

to see the official JOKER video 

ERIKS are an official Wera stockist, and carry the full JOKER 

range. For further details, contact ERIKS or the Wera Customer 

Helpline on 01246 277756 / queries@wera-tools.co.uk 

www.wera-tools.co.uk

POSITIVE 

POLLUTION 

REDUCTION 

192 

Safety Glasses, Goggles and Respiratory 

POSITIVE 

WASTE 

REDUCTION 

Safety Glasses 

RX ® Optiflex-C Safety Glasses 

n Lightweight (31g), 

stylish design 

n Perfect fit (comfortable, soft 

components for nose, ear 

and forehead) 

n Polycarbonate lens with 

unique RX anti-scratch 

and anti-fog coatings 

n Ventilating 

n The safety glasses adapt 

themselves without 

adjustments to the 

contours of the face 

n Extremely flexible and 

unbreakable frame 

n Impact test according to 

MIL-PRF-31013 standard 

(295-201 m/s) 

n Compliant with EN166 

and EN170 standards 

Part No 

W93L-50000 

RX ® Optiflex-W Safety Glasses 

n Lightweight (31g) 


components for nose, ear and 

forehead) 

n Polycarbonate lens with 

unique RX anti-scratch and 

anti-fog coatings 

n Ventilating 

n The safety glasses adapt 

themselves without adjustments 

to the contours of the face 

Part No 

W93L-50002 

POSITIVE 

RISK 

REDUCTION 

n Stylish design 



n Protection against impact, 

UV rays and beams of light 

n Shade 5 lens for oxy-fuel 

welding and soldering 



RX ® Optiflex-B Safety Glasses 

n Lightweight (31g), stylish design 


components for nose, ear 

and forehead) 

n Polycarbonate lens with unique RX 

anti-scratch and anti-fog coatings 

n Ventilating 

n The safety glasses adapt themselves 

without adjustments to the contours 

of the face 



n Protection against impact, 

UV rays and beams of light 

n The brown colour of the 

lens improves the adaption 

of the eyes to variable 

lighting conditions 

n Good colour recognition – TSR 

(Traffic Signal Recognition) 



Part No 

W93L-50001 

RX ® Optiflex-V 

Safety Glasses 

n Polycarbonate lens 

n Lightweight (43g) more comfortable 

to wear 

n Side ventilation 

n Fits over regular glasses without POSITIVE 

compromising comfort 

Part No 

W93L-50003 

ENERGY 

REDUCTION 

POSITIVE 

POLLUTION 

REDUCTION 

POSITIVE 

WASTE 

REDUCTION 

Safety Goggles 

RX ® Optiflex-G Wide Vision Goggles 

The RX Optiflex-G wide-vision goggles offer the wearer better protection. Thanks to the wide coverage 

of the face, adjustable headband and superior impact resistance, the RX Optiflex-G wide-vision goggles 

are a reference in the market. The sophisticated indirect ventilation system reduces fogging to a minimum. 

The soft silicone casing ensures optimum comfort and protects against impact and chemical splashes. 

POSITIVE 

RISK 

REDUCTION 

n Lightweight (93g) 

n Ergonomically designed: 180° 

wide-vision goggles 

n Highest optical quality lens Class 1 

n CE approved, EN166 protection 

against splashes of chemical liquids, 

large dust particles and molten metal 

n Wide and fully adjustable 

elastic headband 

n Indirect ventilation 

n Anti-scratch and 

anti-fog coating 

Part No 

W93L-50004 



Go 


POSITIVE 

POLLUTION 

REDUCTION 

POSITIVE 

WASTE 

REDUCTION 

193 

Respiratory 

POSITIVE 

RISK 

REDUCTION 

RX ® Flat-Fold Disposable Mask 

A single use, lightweight, ergonomically shaped disposable respirator for protection against 

non-toxic and toxic particles. 

n Multi-layered filter medium 

electrostatically charged 

n Ergonomically shaped with adjustable 

head straps to provide individual fit 

n Adjustable nose clip to ensure a good 

seal around the nose 

n Individually packed complete with 

instructions for use 

n Conforms to the European approved 

standard EN149:2001 and A1:2009NR 

n Non-allergenic 

n Exhalation valve added for easier 

breathing (P1V, P2V and P3V) 

normal 

Assigned 

Part No. Description Packaging Protection Factor Protection Factor 

W93L-50028 RX FFP1 disposable mask folded 20 4 4 

W93L-50027 RX FFP1V disposable mask folded and valve 10 4 4 

W93L-50029 RX FFP2 disposable mask folded 20 12 10 



RX ® Pre-Formed (Cupped) Disposable Masks 

RX ® pre-formed masks are manufactured to the highest standards and provide excellent comfort 

and protection. A range of protective factors are available both with and without a valve. 



n Ergonomically shaped with adjustable 

nose clip to ensure a good seal 

around the nose 




breathing (P1V, P2V and P3V) 

normal 

Assigned 

Part No. Description Packaging Protection Factor Protection Factor 

W93L-50037 RX FFP1 pre-formed disposable mask 20 4 4 

W93L-50036 RX FFP1V pre-formed disposable mask and valve 10 4 4 

W93L-50034 RX FFP2 pre-formed disposable mask 20 12 10 



RX ® Pre-Formed (Cupped) and Reinforced Disposable Mask 

Due to its lightweight netted construction, this mask has a very low breathing resistance, so even 

during the most demanding working conditions the wearer enjoys the highest possible comfort. 



n Reinforced net keeps the mask in its 

original form making it last longer. 

n Particulary suitable during hot and 

humid conditions 

n The valve cover protects the valve 

avoiding mechanical damage 

n Ergonomically shaped for comfort and 

ease of use 

n Adjustable head straps to provide an 

individual fit 




breathing (P2V and P3V) 

normal Protection Assigned 

Part No. Description Packaging Factor Protection Factor 

W93L-50031 RX FFP2 pre-formed disposable mask reinforced 10 12 10 

W93L-50033 RX FFP2V P2 pre-formed disposable mask reinforced and valve 10 12 10 

W93L-50035 RX FFP3V P2 pre-formed disposable mask reinforced and valve 5 50 20 





POSITIVE 

POLLUTION 

REDUCTION 

194 

Safety Footwear and Gloves 

POSITIVE 

WASTE 

REDUCTION 

Safety Footwear 

POSITIVE 

RISK 

REDUCTION 

RX ® Securo Safety Shoe 

The RX Securo is a quality safety shoe made of lightweight materials, with shock absorbent 

soles and composite toe protection, plus MS3 non-metallic penetration resistant midsole. 

This makes the RX Footwear one of the most comfortable and stylish on the market. 

n Composite toe cap which can 

resist a pressure of 200 J 

n Anti-perforation sole made 

from MS3 textile; very flexible, 

gives a much better walking 

comfort, isolates against the 

cold and/or heat, protects a 

larger area of the foot 

n Scuff pad allows more ‘give’ 

at the point where the foot 

flexes. Ideal for jobs where 

kneeling is required 

n Quality uppers stabilises 

and supports the foot 

n TPU heel support 

n Reflective accents 

for high visibility 

n Shock-absorbing comfort sole 

for better walking comfort 

n PU/rubber sole material; 

oil and petrol resistant 

n HRO resistant to 300°C 

contact heat 

n SRC sole for improved 

slip resistance 

n Ladder grip prevents 

slipping on ladders 

n Extra wide fit 

n Sizes: EU 38–47, UK 5–12 

Part No. Description UK size 

W93L-50005 RX Safety Shoe Securo 5 


W93L-50007 RX Safety Shoe Securo 6.5 





W93L-50011 RX Safety Shoe Securo 9.5 




RX ® Solido Safety Boot 

The RX Solido is a quality safety boot made of lightweight materials, with 

shock absorbent soles and composite toe protection, plus MS3 non-metallic 

penetration resistant midsole. This makes the RX Footwear one of the most 

comfortable and stylish on the market. 

n Composite toe cap which can 

resist a pressure of 200 J 

n Anti-perforation sole made 

from MS3 textile; very flexible, 

gives a much better walking 

comfort, isolates against the 

cold and/or heat, protects a 

larger area of the foot 

n Scuff pad allows more ‘give’ 

at the point where the foot 

flexes. Ideal for jobs where 

kneeling is required. 

n Quality uppers stabilises 

and supports the foot 

n TPU heel support 

n Reflective accents 

for high visibility 

n Shock-absorbing comfort sole 

for better walking comfort 

n PU/rubber sole material; 

oil and petrol resistant 

n HRO resistant to 300°C 

contact heat 

n SRC sole for improved 

slip resistance 

n Ladder grip prevents 

slipping on ladders 

n Extra wide fit 

n Sizes: EU 38–47, UK 5–12 


W93L-50015 RX Safety Boot Solido 5 


W93L-50017 RX Safety Boot Solido 6.5 





W93L-50021 RX Safety Boot Solido 9.5 






Attention 

Workshops offering repair or replacement

POSITIVE 

POLLUTION 

REDUCTION 

POSITIVE 

WASTE 

REDUCTION 

195 

Safety Gloves 

POSITIVE 

RISK 

REDUCTION 

RX ® Chemresist Chemical Resistant Gloves 

Synthetic rubber glove with nitrile coating. 

n Performance – Offers very good abrasion 

and puncture resistance, and protection 

against a wide range of chemicals including 

strong detergents, oils and certain solvents 

n Comfort – Anatomically shaped ensuring 

comfort reducing hand fatigue 

n Good Grip – Slip resistant raised diamond 

pattern on palm of glove ensuring good grip 

in both wet and dry conditions 

n Flock Lined – Soft cotton flock lining 

absorbs perspiration keeping hands cool. 

Easier to put on and take off 

n Sanitised – Contains a fungicidal and 

bacteriostatic agent. Thickness 0.38mm 

(measured on the palm) 

n Anti Static Properties – Meets the surface 

resitivity requirements of EN149 part 1:1995 

n Applications – Graphics industry, agricuture, 

production and assembly, food manufacturing 

and preparation, automotive, engineering 

and manufacturing, chemical manufacture, 

laboratory and pharmaceutical, janitorial 

n Colour – Green 

n Sold in packs of 12 pairs 

Part No. 

size 

W93L-50038 6 

W93L-50043 7 

W93L-50042 8 

W93L-50045 9 

W93L-50040 10 

RX ® Durafit NFT All Round Safety Glove 

Seamless nylon glove with a foamed nitrile palm coating. 

n Dry and Wet Grip – The foamed nitrile 

coating channels liquids away from the 

glove surface, ensuring superb wet grip 

n Durability – Outstanding abrasion 

resistance, for longevity and durability 

n Dexterity and Fit – The breathable, 

seamless liner provides outstanding 

dexterity and a snug fit for for the most 

tactile of applications 

n Applications – Component handling, 

assembly, electronics, light engineering, 

construction, automotive. 

n Colour – Black 


Part No. 

size 

W93L-50063 6 

W93L-50062 7 

W93L-50060 8 

W93L-50065 9 

W93L-50061 10 





POSITIVE 

POLLUTION 

REDUCTION 

196 

Safety Gloves and Eyewear 

POSITIVE 

WASTE 

REDUCTION 

Safety Gloves 

POSITIVE 

RISK 

REDUCTION 

RX ® Dyneema Safe3 Cut Resistant Gloves 

Seamless knitted Dyneema ® glove with polyurethane coating. 

n Comfort –The seamless construction 

provides an exceptional level of comfort, 

whilst the open back style allows 

excellent breathability 

n Strength –This lightweight glove with 

Dyneema ® provides excellent resistance 

to cut, abrasion and tear 

n Dexterity –The glove has been 

designed to be tight fitting to give 

maximum dexterity for the most 

tactile of operations 

n Knitted Wrist – Elasticated, for 

a snug fit. The knitted wrist is extra 

long for optimal wrist protection 

n Applications – Component 

handling, assembly, electronics 

and cutting activities 

n Colour – Grey 


Part No. 

size 

W93L-50057 6 

W93L-50059 7 

W93L-50058 8 

W93L-50056 9 

W93L-50055 10 

RX ® Top-Flex PU Precision Gloves 

Seamless knitted nylon glove with polyurethane coating. 

n Comfort – The seamless construction 




n Dexterity – The glove has been 

designed to be tight fitting to give 

maximum dexterity for the most 

tactile of operations 

n Knitted Wrist – Elasticated for 

a snug fit 

n Applications – Component 

handling, assembly, electronics 

and light engineering 

n Colour – Available in black or white 


Part No. size Colour 

W93L-50048 6 Black 

W93L-50051 7 Black 

W93L-50053 8 Black 

W93L-50054 9 Black 

W93L-50047 10 Black 

W93L-50049 6 White 

W93L-50046 7 White 

W93L-50050 8 White 

W93L-50052 9 White 

W93L-50044 10 White 

RX ® NITRI-4-GRIP Safety Gloves for Extra Grip 

Seamless knitted nylon glove with a light porous breathable foam nitrile coating. 

n Comfort – The seamless construction 




n dexterity and Fit – The snug fit 

provides maximum dexterity for the 

most tactile of applications 

n dry and Wet Grip – as well as 

providing excellent dry grip, Nitri-4 Grip 

channels oils and liquids away from the 

surface ensuring superb wet grip 

n Applications –Component 

handling, assembly 

n Colour – White 


Part No. 

size 

W93L-50067 6 

W93L-50066 7 

W93L-50039 8 

W93L-50041 9 

W93L-50064 10 



Know-How 


197 

BoxOptix System 

n A hassle free, no hidden costs, safety eyecare 

solution for prescription spectacle wearers 

n An ‘all-in-a-box’ solution for a single price with 

all costs included 

n Includes the fitting of single vision, bifocal 

or varifocal insert lenses at no extra cost 

n Replacement spectacle frames available 

– no need to replace complete product. 

Just remove the prescription insert and 

replace the frame when required 

n Paperless system – no administration required 

TM 

Optical Voucher and Prescription Insert 

Provides sight test, dispensing services and standard single vision, bifocal or varifocal 

1.5 index optical lenses for clip in/out optical insert. The insert is removable, making 

it easy to clean and interchangeable should the spectacles need replacing. 

Comfort 

Soft foam browguard, soft temple tips and nose pad 

to provide a comfortable fit. Anti-slip temple tips help 

prevent the spectacles from slipping. 

Protection 

Indoor/outdoor semi-mirrored coating provides 

a low level of tint for outdoor use thus reducing 

glare. Stylish wraparound design incorporating 

lateral protection – no need for extra side shields. 

CE approved to EN 166 1 F T and EN 172 5-1, 7. 

Anti-scratch 

Harrier Polycarbonate lenses and prescription 

insert lenses have a hard anti scratch coating 

as standard, providing improved durability, 

especially in dusty environments. 

Temple Pivot System 

Temple pivot system provides angle 

adjustment for a more exacting fit, 

ideal for different shapes and sizes. 

Part No. 

BOXOPTIX 





198 

Power Tools and Drill Sets, Taps and Bits 

M18 and M12 FUel 

Milwaukee Tool continues to revolutionise cordless power tools with the introduction of 

M18 and M12 FUEL – an exclusive line of extreme-performance cordless power tools 

designed, engineered and built by Milwaukee ® to deliver unmatched productivity. 

As the clear leader in cordless tool development, Milwaukee has integrated three 

ground-breaking technologies: the POWERSTATE brushless motor, REDLITHIUM 

battery technology, and REDLINK PLUS Intelligence, to provide a new class in durability, 

run-time and performance for the professional tradesman. 

With advancements in the battery, electronics and motor, the new M18 and M12 FUEL 

products represent game-changing innovation for our entire lithium ecosystem. 

12V FUEL M12 CID-202C M12 FUEL 

¼" Hex Compact Impact Driver 

n Voltage: 12 Volt 

n Supplied with 2 x 2.0Ah REDLITHIUM-ION batteries 

n Bit holder: 1/4 inch Hex 

n No load speed: 0–1,200/0-2,650/min 

n Max torque: 19/135 Nm 

n Impact: 2,700/3,550/min 


Part No 

n Weight: 1.0kg 

MILM12CID12F 

12V M12 BS-402C M12 Cordless Bandsaw 

12V Compact C12 PD-202C M12 

2-Speed Percussion Drill 


n Supplied with 2 x 2.0Ah Li-Ion batteries, charger and kitbox 

n Chuck: 10mm keyless 

n No load speed: 0–400/0–1,500/min 

n Max torque: 32Nm 

Part No 

n Torque settings: 18 

MILC12CPD2 

n Drilling capacity: 

Wood: 22mm, Steel: 10mm, Masonry: 7mm 

n Maximum impact rate: 22,550/min 

12V M12 IC-21C Cordless M-Spector 360 Camera 



n No load speed: 0–85/min 

n Blade length: 678 mm 

n Max cutting capacity: 

41 x 41mm 


n 2 x 4.0Ah Li-Ion batteries, 

charger and kitbox included 

n Display: 640 x 480Pixels: 

68mm LCD 

n Camera head: 

Aluminum 9mm 

n Lighting: 4 LEDs 

n Cable reach: 914mm 

n Weight: 0.6 kg 

Part No 

MILM12IC15 

n Supplied with a 18 TPI blade 

Part No 

MILM12BS4 

n 1 x 1.5Ah battery 

and charger supplied 

18V M18 CPD-402C M18 FUEL 

Compact Percussion Drill 

18V FUEL M18 CID-402C M18 FUEL 

¼" Hex Compact Impact Driver 



n Chuck: 13mm keyless 

n Bit holder: 1/4 inch Hex 

n No load speed: 0–550/0–1,850/min 

n No load speed: 800/2,100/2,900/min 

n Max torque: 70Nm 

n Max torque: 23/79/180 Nm 

n Drilling capacity: Wood: 45mm, 

Steel: 13mm, Masonry: 15mm 

n Maximum impact rate: 31,450/bpm 

n 2 x 4.0Ah REDLITHIUM-ION batteries 

Part No 

MILM18CPD4F 

n Impact: 1,750/2,850/3,600/min 


n 2 x 4.0Ah REDLITHIUM-ION 

batteries, charger and kitbox 

Part No 

MILM18CID4F 



Go 


199 

Compact Drill Set 

n TiN tip coating for increased tool life 

and performance 

n Self-centring split point promotes 

superb accuracy and hole quality 

n Will drill steel, stainless, cast iron, 

ceramics, plastics and many other 

materials with ease 

n Contents: 1-10.0mm x 0.5mm 

increments (19pc) 

Part No 

DORZZ01A002SET 

HSS Tap and Drill Set 

n Brand new 14pc set 

n Features E500 straight flute taps 

and A002 TiN coated jobbers 

n Ideal for a wide range of general 

purpose machining applications 

n Contains M3-M12 taps and equivalent 

pre-tapping dril sizes 

Part No 

DORL115NO101 

Technical Handbook 

Handy, pocket-sized publication packed 

full of useful information, including: 

n Quick reference tables, including decimal 

equivalents and tapping drill sizes 

n Cutting data formulae, including calculations 

for speeds/feeds, power, torque and thrust 

n Useful troubleshooting hints and tips 

for all major tooling applications 

HSS TiN Jobber Drill 

n TiN tip coating for increased tool life 

and performance 

n Self-centring split point promotes 

superb accuracy and hole quality 

n Will drill steel, stainless, cast iron, 

ceramics, plastics and many other 

materials with ease 

n Size range: 1.0-16.0mm, 3/64-5/8 inch 

HSCo Heavy Duty Stub Drill 

n Excellent for use in a wide range of 

materials 

n Special split-point ensures easy starting 

and accurate drill location 

n HSCo for longer tool life 

n Size range: 1.0-13.0mm, 1/8-1/2 inch 

Multi Material Taps 

n Ideal for threading steels, stainless and cast iron 

n Powder metallurgy cobalt steel for unbeatable 

strength and tool life 

n Available in spiral point for through holes (E001) 

or spiral point for blind holes (E003) 

n E001 Size range: M1.6-24 

E003 Size range: M2-24 

Part No 

DORA002 

Part No 

DORA117 

Part No 

DORE001 

DORE003 

Part No 

ZZZU HANDBOOK 





200 

Multipower Multipliers and Line Marking 

Stahlwille Multipower Torque Multipliers 

When the going gets tough, these torque multipliers are the ideal choice. In most cases they 

will take the effort out of tightening or loosening stubborn or large screws. Thanks to the 

planetary gearbox in the Multipower, it is no longer necessary to use long levers any more to 

boost human strength. The uniform transmission of forces protects nuts and bolts. 

Even very high torques can be applied with ease and with long-term repeated accuracy. This is guaranteed by the 

design of the tool, the quality of the materials from which it is made and the high level of craftsmanship in its 

manufacture. Combined with a torque wrench, the Multipower becomes a powerful friend to have around. 

The full range extends up to 5,000Nm/3,687ft.lb. On request Stahlwille can also supply tools to cover 

the range up to 12,000Nm/8,850ft.lb. The larger models also have an integrated non-return lock. 

Multipower torque multipliers have an overload cutout and planetary gearbox, they are supplied in a carrying 

case, with a replacement hex bolt for the overload cutout, guaranteed maximum accuracy deviation ±5%. 

n The engineering, materials and workmanship that go into Mulitpower means they are 

extremely robust 

n When combined with Stahlwille torque wrenches, Multipower really shows its strength 

n The Multipower range extends to 5000 Nm/3687 ft.lb 

n Multipower tools are also available on request up to 12000 Nm/8850 ft.lb 

n Multipower tools from 2000 Nm are fitted with an anti-backlash device 

Part No description Gear Torque Internal External 

Ratio Ratio Sq Drive Sq Drive 

STW53030800 Multipower 300-800Nm 4 : 1 1 : 3.5 1/2 3/4 

STW53031350 Multipower 300-1350Nm 4 : 1 1 : 3.6 3/4 3/4 

STW53032000 Multipower 300-2000Nm 16 : 1 1 : 12.5 1/2 1 

STW53033000 Multipower 300-3000Nm 16 : 1 1 : 12.5 3/4 1 

STW53035000 Multipower 300-5000Nm 20 : 1 1 : 17.0 3/4 1.1/2 

MP100-1500 Multipower 

n Particularly compact construction 

n Light and easy to handle 

n With ratchet function 

n Working angle 8° 

n With rotary scale 

n For use with a torque wrench 

fixed 1/2" square drive 

n Patents applied for 

n In carry case 

n Included in the set: 3 haxagon 

inserts sizes 30, 32, 36mm, 

1 insert with 1" outer square 

drive, 1 reaction arm 400mm 

n Display deviation value ±5% 

Part No Nm¹ ft.lb¹ N m² ft.lb² Gear ratio Torque ratio 

STW96531500 1500.0 1106 300 221 5.62:1 1:5 



Attention 


201 

Easyline ® Edge 

High Definition line marking for food processing sites, general 

production areas, warehouses, car parks and more. 

EASYLINE ® EDGE Applicator 

n 3 line widths: 50mm, 75mm 

and 100mm 

n Line-mark close to walls and 

racking systems 

n For internal and external use 

n Quick and easy to use 

n Heavy-duty storage case 

n Clean, sharp lines 

Part No 

W64A-28260 

Description 

EASYLINE EDGE System 

EASYLINE ® EDGE Paint 

Excellent value for money 

n 100% more paint than most other systems 

n Up to 100m of a 50mm (2") wide line 

n Lasts twice as long as our closest competitior 

n No need for expensive contractors 

Performs brilliantly 

n Twice as durable as any other paint on the market 

n Maintains its bright colour longer than any other competitors 

n Chemically-resistant 

Health, safety and environment focused 

n One of the lowest VOC systems on the 

UK market 

n Non-irritant formula* 

n Not harmful to the environment* 

n Not harmful to aquatic life* 

*Evaluated under EC directive 1999/45/EC 

EASYLINE ® EDGE AQUA 

NEW! 

The only aerosol line marking paint with 

Water Enhanced Technology. Suitable for 

use in the food industry. 

n The first NSF accredited aerosol line marking paint 

n NSF R2 accredited 

n Water Enhanced Technology – chemicals are replaced 

with water 

n Aromatic solvent free – Reducing odour and irritant vapours 

n High durability paint – lasts up 

to 2 years 

n High definition line edges 

providing a professional finish 

n Excellent covering power – 

single coat application 

n For use with the EASYLINE ® 

EDGE applicator 

Quick and easy to use 

n Touch-dry in 10 minutes 

n Ready for light traffic in 30 minutes 

n Intuitive EASYLINE ® applicator 

n Professional quality lines 

Part No 

W64A-28242 

W64A-28243 

Description 

EASYLINE White 

EASYLINE Yellow 

Other colours are available on request 

Part No 

W63A-50008 

W63A-50009 

W63A-50010 

Description 

EASYLINE Aqua White 

EASYLINE Aqua Yellow 

EASYLINE Aqua Black 





Varta The Varta Indestructible Indestructible Torch Torch Range Range 

ood As as good unbreakable as unbreakable 

ww.built-to-survive.com (see www.built-to-survive.com to see for to yourself) see for yourself) 

at, Rain, cold, heat, dirt, hard cold, knocks, dirt, hard crushing knocks, - the crushing torches - the of the torches Varta of Indestructible the Varta Indestructible range stand range up to stand even up the to even the 

of endurance hardest of endurance tests. Let your tests. customers Let your customers discover this discover entirely this new entirely generation new generation of torches! of The torches! distinctive The distinctive 

y hardened specially aircraft hardened aluminium aircraft aluminium and rubber and industrial rubber design, industrial 3 year design, guarantee 3 year and guarantee wide choice and wide of models choice of models 

n more add even to the more outstanding to the outstanding qualities of qualities the range. 

of the range. 

estructible The Indestructible Range is uniquely Range is resilient uniquely with resilient extremely with powerful extremely beams powerful making beams it the making ideal it work the partner. ideal work partner. 

LED x5 1W LED 1W LED1W LED 1W LED1W LED 1W LED3W LED 3W LED3W LED 3W LED 

ructible Indestructible Indestructible Indestructible Indestructible Indestructible Indestructible Indestructible Indestructible Indestructible Indestructible Indestructible 

ght 3AAA Headlight Headlight 3AAA 3AAA Headlight Light 3AAA 3AAALight 3AAA Light 2AA Light 2AA Light 3C Light 3CLight 4C Light 4C 

op height 

Safe drop Safe height drop height Safe drop height 

Safe drop height Safe drop 

Safe 

height 

drop height 

Safe drop 

Safe 

height 

drop height 

Safe drop Safe height drop height 


9m 9m 

9m 

9m 

9m 

9m 

9m 

9m 

9m 4m 

4m 

utput 

Light output Light output Light output 

Light output Light output 

Light output 

Light output 

Light output 

Light output Light output 

Light output 

lumens 

High: 35 lumens High: 100 lumens 



High: 120 High: lumens 

100 lumens 

High: 100 High: lumens 

140 lumens 

High: 140 High: lumens 150 lumens 


lumens 

Low: 11 lumens Low: 36 lumens Low: 19 lumens 

Low: 36 lumens Low: 19 lumens 




Low: 45 lumens Low: 50 lumens 


ange 

Beam range Beam range Beam range 

Beam range Beam range 

Beam range 

Beam range 

Beam range 

Beam range Beam range 

Beam range 

m 

High: 24 mHigh: 100 m High: 160 m 

High: 100 m High: 160 

High: 

m 

150 m 

High: 150 

High: 

m 

140 m 

High: 140 High: m 350 m 

High: 350 m 

m 

Low: 15 mLow: 60 m 

Low: 70 m 

Low: 60 m 

Low: 70 m 

Low: 56 m 

Low: 56 m 

Low: 85 m 

Low: 85 mLow: 195 m 

Low: 195 m 

e 

Run timeRun time 

Run time 

Run time 

Run time 

Run time 

Run time 

Run time 

Run timeRun time 

Run time 

h 

High: 19 hHigh: 3 h 

High: 5 h 

High: 3 h 

High: 5 h 

High: 15 h 

High: 15 h 

High: 38 h 

High: 38 hHigh: 20 h 

High: 20 h 

h 

Low: 40 h 

Low: 15 h 

Low: 40 h 

Low: 15 h 

Low: 40 h 

Low: 35 h 

Low: 35 h 

Low: 85 h 

Low: 85 h 

Low: 78 h 

Low: 78 h 

www.varta-consumer.co.uk 

www.varta-consumer.co.uk

203 

All the lubrication you need? 

ERIKS Lubrication Essentials is range of high quality, readily 

available items designed to meet the most common industrial 

lubrication and maintenance applications. 

We sent out to define a core range of items with excellent stock 

availability, hand picked by our lubrication engineers to cover as 

wide a range of applications as possible while always maintaining 

the very best in performance and compliance. 

n Bearing Greases 

n Lubricating Oils 

n Open Gear Lubricants 

n Automatic Lubricators 

n Maintenance Lubricants 

n Maintenance Cleaners 

n Silicone Lubricants 

n Metal Working Lubricants 

n Leak Detectors 

n Anti-Seize Pastes 

n Corrosion Protection 

Lubrication brands 

Ambersil 

Part of the CRC Industries group, a 

global leader in the chemical industry, 

Ambersil manufacture and market 

high quality maintenance products 

throughout the UK 

Castrol 

One of the most recognised and trusted 

global lubricant brands, dating all the 

way back to 1909. Today Castrol forms 

the main lubricants division of global 

petrochemical giant BP 

OKS 

Based in Maisach Germany, OKS has 

engineered and manufactured specialist 

lubricants to world-class standards 

for over 30 years. The German MRO 

market leader, OKS is part of the 

global Freudenberg Group 

RX 

The RX range of products have been 

developed by ERIKS over many years 

of practical application engineering 

and development. This knowledge and 

understanding is designed into all of our 

products with the aim to increase your 

performance and extend reliability. 

Triflow 

Triflow, a brand of Ronseal, and 

a market leading high quality 

maintenance spray used by both 

consumers and professionals 

across the UK 

Rocol 

Established in 1882 as Ragosine 

and Company, Rocol develops 

and manufactures lubricants and 

maintenance products in Leeds. 

ROCOL is part of ITW, a multinational 

US owned, Fortune 200 company 

WD-40 

Developed in 1953 by the Rocket 

Chemical Company of San Diego, 

California, it took 40 attempts to 

get their water displacing formula 

right and today the WD-40 

Company sells to consumers 

and industrial markets globally 





204 

Bearing Greases and Lubricating Oils 

Wide Temperature Range, EP Bearing Grease 

OKS 404 is a high performance lubricating grease formulated using 

a semi-synthetic lubricating oil and a lithium complex soap fortified 

with extreme pressure additives. 

This provides OKS 404 with the capability to lubricate medium to high 

speed friction and roller bearings over a very wide temperature range 

and under high loads. 

Part No NGLI Temperature Base Oil Viscosity Four Ball Weld Load DIN Standard 

OKS404-400ML 2 –30°C to +150°C 100mm²/s 2,800N DIN 51 502: KP2P-30 

Characteristics 

Appearance: 

Extreme Pressure: 

Oil: 

Soap: 

Also available: 

Light coloured 

Yes 

Semi-synthetic oil 

Lithium-complex 

5kg 

25kg 

Food Grade, EP Bearing Grease 

OKS 479 is a high performance food certified lubricating grease formulated 

to lubricate friction and roller bearings operating at medium to moderately 

high speeds across a very wide temperature range and under high loads. 

These inherent properties enable OKS 479 to be the ideal product to fulfill 

the majority of food and beverage manufacturing plant requirements and 

can therefore significantly reduce the on-site lubricant inventory. 

Certified by NSF as H1 hence suitable for incidental contact with food 

and beverage products. 


Appearance: 



Yes 

Oil: 

Polyalphaolefin (PAO) 

Soap: 

Aluminium-complex 


Part No NGLI Temperature NSF Approval: Base Oil Four Ball DIN Standard 

Viscosity Weld Load 

OKS479-400ML 1 –25°C to +160°C H1 Reg No: 135675 400mm²/s 2,200N DIN 51 502: KPFHC1P-20 

5kg 

25kg 

High Temperature, Long Life, EP Bearing Grease 

OKS 422 is a high performance lubricating grease formulated to 

lubricate friction and roller bearings operating at high speeds and/or 

high temperatures. The utilisation of low viscosity synthetic lubricating 

oil within its formulation provides OKS 422 with an extremely wide 

operating temperature range, therefore it can be used as a spindle 

bearing lubricant and also has the capability to operate at extremely 

low temperature. 


Appearance: 


Extreme Pressure: EP Additive 

Oil: 


Soap: 

Barium-complex 


Part No NGLI Temperature Base Oil Viscosity Four Ball Weld Load DIN Standard 

OKS404-400ML 2 –40°C to +180°C 50mm²/s 4,000N DIN 51 502: KPHC2R-40 

5kg 

25kg 

General Purpose Industrial Grease (Non EP) 

SKF LGMT 2 is a mineral oil based, lithium soap thickened grease. 

This general purpose grease is suitable for a wide range of industrial 

and automotive applications. 

Part No NGLI Temperature NSF Approval Base Oil Viscosity DIN Standard 

LGMT2/0.4-SKF 2 –30°C to +120°C n/a 110mm²/s DIN 51 852: K2K-30 


Appearance: 

Oil: 

Soap: 


Red Brown 

Mineral 

Lithium 



Go 

To your Local Service Centre 

200ml 

1l

205 

Gear Oil 

Castrol Alpha SP 220 and 320 gear oils are high quality solvent refined 

mineral oils, fortified with sulphur-phosphorous compounds to impart 

anti-wear and extreme pressure properties. 

These gear lubricants are recommended for the use of industrial 

gearboxes with forced circulation or splash and oil bath lubrication 

and meet many of the major OEM approvals. 

Part No iso VG Temperature Base Oil Viscosity 

CAS-ALPHASP220-20LTR 220 –10°C to +105°C 220mm²/s 

CAS-ALPHASP320-20LTR 320 –10°C to +105°C 320mm²/s 

Available in the following viscosity grades: 68, 100, 150, 460, 680. 


Appearance: Colourless to light amber 

EP Additive: 

Yes 

Oil: 

Mineral 


208l 

Hydraulic Oil 

Castrol Hyspin AWS 32 and 46 premium hydraulic oils are formulated 

utilising turbine quality solvent refined mineral oils, fortified by an optimised 

additive package consisting of additives to provide enhanced anti-wear, 

rust and oxidation properties. 

These hydraulic oils meet the requirements of the majority of the hydraulic 

system original equipment manufacturers in the industrial market. 

Part No iso VG Temperature Base Oil Viscosity DIN Standard 

CAS-HYSPINAWS32-20LTR 220 –10°C to +105°C 32mm²/s DIN 51 502: HLP 

CAS-HYSPINAWS46-20LTR 320 –10°C to +105°C 46mm²/s DIN 51 502: HLP 

Available in the following viscosity grades: 10, 15, 22, 68, 100, 180. 


Appearance: 

Oil: 


Colourless to yellow 

Mineral 

208l 

Compressor Oil 

Castrol Aircol PD 100 is a high quality air compressor lubricating oil 

formulated from high quality solvent refined mineral oils and fortified 

with additives to impart increased resistance to thermal decomposition 

and component wear. Castrol Aircol PD 100 meets the requirements 

DIN 51506 VD-L. 


Appearance: 

Oil: 

Light yellow 

Mineral 

Part No iso VG Temperature Base Oil Viscosity DIN Standard 

CAS-AIRCOLPD100-20LTR 100 0°C to +110°C 100mm²/s DIN 51 506: VD-L 


Available in the following viscosity grades: 32, 46, 68, 150. 

208l 

Food Grade Gear Oil 

OKS 3720 is a high performance food industry gear oil formulated using 

synthetic hydrocarbon lubricating oil fortified with extreme pressure 

additives to impart anti-wear and extreme pressure properties. 

These gear lubricants are recommended for the lubrication of industrial 

gearboxes with forced circulation or splash and oil bath lubrication. 

Certified by NSF as H1 hence suitable for incidental contact with food 

and beverage products. 

Part No NSF Approval ISO VG Temperature Base Oil Viscosity DIN Standard 

OKS3720-5LTR H1 Reg. No. 135752 220 –30°C to +120°C 220mm²/s DIN 51 502: CLP HC 220 

OKS3720-25LTR H1 Reg. No. 135752 220 –30°C to +120°C 220mm²/s DIN 51 502: CLP HC 220 

Available in the following viscosity grades: 320 – OKS3725, 460 – OKS3730, 680 – OKS3740. 


Appearance: 

Oil: 


Colourless to yellow 

Mineral 



200l 



206 

Lubricants 

Open Gear Grease 

Rocol Tufgear Spray is a high performance 

heavy duty open gear lubricant formulated 

utilising a non-melting base with a high 

viscosity mineral lubricating oil and solid 

lubricants. It is designed to withstand high 

loads and provide a tenacious almost dry 

film once cured which will both lubricate 

and protect the wire rope from corrosion. 


Appearance: 

EP Additive: 

Oil: 

Soap: 

Black almost dry film 

Yes 

Mineral 

Organically modified clay 

Part No nGLI Temperature Base Oil Viscosity Four Ball Weld Load 

ROC-TUFGEAR SPRAYL 2 –10°C to +100°C >1000mm²/s 7,845N 

Dry Open Gear Spray 

OKS 491 is a spray applied high performance open gear lubricant formulated from 

graphite solid lubricant and resins to produce a tenacious dry film. OKS 491 is ideally 

suited for the lubrication of slow speed open gears which may be subjected to high 

loads or operating in dusty environments, can also be used for the dry lubrication of 

wire ropes and springs. 

Part No 

temperature 


Appearance: 

Black 

OKS491-500ML 

–30°C to +100°C 

EP Additive: 

Natural resins 

Oil: 

Mineral 

Soap: 

Graphite, bitumen 

Solid Lubricant: 

Solvent 

Chain Spray 

OKS 671 is a high performance spray applied lubricating oil formulated utilising high 

quality solvent refined mineral oils fortified with extreme pressure and sold lubricant 

additives. Especially suited for the long term lubrication of chains, linear bearings and 

guideways,pins,pivots and hinges. 

Part No 

temperature 


Appearance: 

Light-coloured 

OKS671-400ML 

–30°C to +80°C 

Oil: 

Mineral 

Additive Package: 

Mox-Active 


White Solid lubricants 

Food Grade Chain Spray 

OKS 3751 is a spray applied high performance chain oil for the food industry, it is 

formulated using synthetic hydrocarbon lubricating oil fortified with selected additives 

and PTFE. The additive package enables OKS 3751 to provide excellent high 

temperature and oxidation stability, excellent wear protection and is very adherent. 

Certified by NSF as H1 hence suitable for incidental contact with food and 

beverage products. 

Part No 

temperature 


Appearance: 

Whitish 

OKS3751-500ML 

35°C to +135°C 

Oil: 



PTFE 



Attention 


207 

High Performance, Multipurpose 

Maintenance Spray 

Very high performance maintenance fluid for dismantling, lubricating and protection of 

machine elements and metal surfaces with excellent cleaning action and Temporary 

protection against corrosion. Displaces moisture and performs well as a lubricating oil. 

Part No 

temperature 


Appearance: 

Yellowish-transparent 

OKS641-500ML 

-50°C to +80°C 

Oil: 

Mineral 

Additive 

Package: Solvent 

Leak Detector Spray 

Allows the location of leaks on pressurised lines, fittings and containers. For use on 

pneumatic, oxygen and gas systems as well as refrigeration systems. Formation of 

bubbles indicates loss of gas. For universal use. Non-toxic. Wetting of area to be 

checked by spraying on. When using on polyamide lines, wash off product with water 

afterwards. 

Part No 

temperature 

OKS2801-400ML up to + 80°C 


Appearance: 


Oil: 

Additive Package: 

Colourless 

Yes 

Active ingredients 

Corrosion protection 

Silicone Spray (also for mould release) 

Chemically neutral, solvent-free and colourless silicone spray which also displaces 

water. An ideal fitting aid for rubber profiles and care and impregnation of plastic 

surfaces and textiles. Lubricant for use in processing plastics. 

Part No 

temperature 


Appearance: 

Light-coloured 

OKS1361-500ML 

-50°C to +200°C 

Oil: 

Silicone 

Cutting Oil 

Bio-Degradable Cleaner 

For machining work on all metals. Permits 

high cutting speeds and results in optimum 

cutting surfaces and extended tool life. 


Appearance: 


Oil: 

Part No 

OKS391-400ML 


Yes 

Mineral 

Biodegradable aqueous cleaner for removing 

heavy oily, greasy and sooty soiling. Gentle to 

delicate surfaces, for universal use in industry, 

workshops and food processing technology. 

n NSF A1 Reg. No. 129003 


Appearance: 


Oil: 

Part No 

OKS2650-500ML 

Reddish 

Water 

Surface-active agents 

temperature 

-50°C to +200°C 





208 

Lubricants 

WD-40 Multi-Use Product Aerosols 

n Cleans, protects, penetrates, lubricates and displaces moisture 

n Prevents rust and corrosion 

n Silicone free 

n Easy to use 

n Versatile 

Part No 

WD40 - 100ML 

WD40 - 200ML 

WD40 - 400ML 

WD40 - 600ML 

size 

100ml 

200ml 

400ml 

600ml 

WD-40 Multi-Use Product Bulk 

n Cleans, protects, penetrates, lubricates 

and displaces moisture 


n Silicone free 

n Easy to use 

n Versatile 

Part No 

WD40 - 5LTR 

WD40 - 25LTR 

size 

5ltr 

25ltr 

High Performance 

Silicone Lubricant 

n Withstands temperatures 

of –35°C to +200°C 

n Excellent lubrication on plastics, 

rubber, wood and metal 

n Formulated for improved 

high pressure performance 

n Waterproofs and protects 

against moisture 


n Eliminates sticking 


PTFE Lubricant 


of –20°C to +100°C 

n For the use of metals, glass, 

vinyl, rubber and plastic 

n Extends life of tools 

and equipment 

n Reduces friction and wear 

n Long lasting formula provides 

superior lubrication 

Part No 

size 

Part No 

size 

WD40-SPECIALIST SIL-400ML 

400ml 

WD40-SPECIALIST HP-400ML 

400ml 



Know-How 


209 

Fast Drying Contact 

Cleaner 

n Fast active non-conductive cleaner 

n Perfect for cleaning electrical 

equipment, contacts, plastic 

and rubber 

n Penetrates quickly and 

leaves no residue 

n Penetrates in those 

hard to reach areas 

Part No 

WD40-SPECIALIST CC-400ML 

size 

400ml 

Fast Release Penetrant 


of –20°C to +90°C 

n Quickly penetrates rusted 

and corroded parts 

n Loosens seized fixings 

n Lubricates and prevents 

rust and corrosion 

n Highly water resistant 

n Very low surface tension 

to penetrate rust 

n Safe on metals, alloys, rubber, 

plastics and most paints 


Dry PTFE Lubricant 


of –45°C to +260°C 

n Ideal to be used on metals, 

plastic and glass 

n Enhanced lubrication and protection 

n Produces a clear dry film that 

resists dirt, dust and oil 

n Reduces friction and wear 

n Advanced formulation works as 

an effective mould release agent 

Part No 

size 

Part No 

size 

WD40-SPECIALIST PEN-400ML 

400ml 

WD40-SPECIALIST DRY-400ML 

400ml 


White Lithium Grease 


of –18°C to +145°C 

n For use on metal to metal 

connections 

n Water and heat resistant lubricant 

n Long last protection against rust 

and corrosion 

n Ideal for load bearing application 

n High viscosity lubricant 

Fast Acting Degreaser 

n Cleans equipment to make it run 

smoother and last longer 

n Works immediately on contact 

n Easy to rinse and leaves no residue 

n Cleans away oil, grease, dirt and grime 

n Can be used on a variety of surfaces, 

including metal 

Part No 

size 

Part No 

size 

WD40-SPECIALIST LG-400ML 

400ml 

WD40-SPECIALIST DG-400ML 

500ml 





210 

Food Industry Lubricants 

Metal Detectable Plastic Components for 

Rocol ® Food Safe Maintenance Aerosols 

One more step in food safety. ROCOL, the UK’s first ISO 21469 Certified lubricants 

manufacturer, launches the unique DETEX Technology. DETEX metal detectable components 

are designed to assist food processing plants in meeting strict HACCP requirements. 

General Lubrication 

FOODLUBE ® 

Spray Grease 

FOODLUBE ® 

Spray 

FOODLUBE ® Precision 

Silicone Spray 

Med/Heavy Duty 

Greasy Film 

normal Conditions 

Multi-purpose grease 

for bearings, linkages, 

pins and slides. 

Part No 

ROC-FOODLUBE GREASE-400ML 

Light Duty 

Veg Oil Based Film 

normal Conditions 

Light duty oil for linkages, 

pins, pivots bearings and 

chains where vegetable oil 

is preferred. 

Part No 

ROC-FOODLUBE SPRAY 

Light Duty 

Silicone Based 

Light Oily Film 

Normal Conditions 

Low friction almost dry 

film for chutes, slides and 

general light lubrication. 

Part No 

ROC-SL SPRAY-400ML 

General Lubrication 

FOODLUBE ® 

Dry PTFE Spray 

FOODLUBE ® 

WD Spray 

FOODLUBE ® Belt 

Dressing Spray 

Light Duty 

Dry PTFE Film 

Normal Conditions 

Low friction, dry film for chutes, 

slides and general light lubrication. 

Part No 

ROC-IFL SPRAY-400ML 

Light Duty 

Water Displacing Film 

normal Environments 

Multi purpose lubricant, cleans, 

protects lubricates, penetrates 

and displaces water on linkages, 

pins, bushes, bearings etc. 

Part No 

ROC-FOODLUBE WD-300ML 

Drive Belts 

Specialist Applications 

Conditions and prevents 

slippage of all types of flat 

and vee drive belts. 

Part No 

ROC-BELT DRESSING SPRAY 

Drive and Conveyor Chains 

FOODLUBE ® 

Chain Spray 

Corrosion 

FOODLUBE ® 

Protect Spray 

General Applications 

Dry PTFE Film 

medium Temp 

(–20ºC to +150ºC) 

Multi-purpose oil for all drive 

and conveyor chains in all 

clean industries. 

Water Displacing Film 

Removable Film 

Waxy film for long term 

corrosion protection. 



Part No 

ROC-PRODUCT CHAIN SPRAY 

Go 

To your Local Service Centre 

Part No 

ROC-FOODLUBE PROT-300ML

211 

Assembly 

FOODLUBE ® Multi- 

Paste Spray 

FOODLUBE ® Shock 

Release Spray 

FOODLUBE ® 

Dismantling Spray 

FOODLUBE ® Electra 

Clean Spray 

Aerosol Applied 

All types of 

static fasteners 

including 

stainless steel. 

Freezing Spray 

Dismantling 

Rapidly freezes down to 

–40°c to give effective 

release of all types of 

static fasteners. 

Penetrating Lubricants 

Dismantling 

Fast acting spray that 

penetrates, releases 

and cleans. 

Residue Free Solvent 

Electrical/Electronic 

Extremely fast 

evaporating solvent for 

electric motors, relays 

and switchgears. 

Part No 

ROC-FOODLUBE PASTE-400ML 

Part No 

N/A 

Part No 

ROC-DISMANTLING SPRAY 

Part No 

ROC-ELECTRA CLEAN SPRAY 

Cleaners 

FOODLUBE ® Remover 

and Degreaser Spray 

Heavy Duty Solvent 

General Purpose 

Citrus based multi 

purpose cleaner. 

Part No 

N/A 

FOODLUBE ® Industrial Cleaner 

Rapid Dry Spray 

Residue Free Solvent 


Multi-purpose degreaser designed 

to remove grease, oil, dirt and grime. 

Part No 

ROC-IND CLEANER-300ML 

FOODLUBE ® Foam 

Cleaner Spray 

Water Based 


Removes grease, grime and dirt. 

Ideal for all surfaces including 

plastics and metal. 

Part No 

ROC-FOAM CLEANER-400ML 

NEW Metal Enriched Paint Range from ROCOL ® 

Available in a variety of finishes, the range offers a highly flexible method of 

galvanisation, which is suited to in-situ application and can be applied to both 

new and old metal components for long term protection against corrosion. 

Triple Protection 

Enhanced Water Resistance 

Optimum Cathodic Defence 

Mechanical Toughness 

Cold Galvanising 

Spray 

Ultimate long term corrosion 

protection for metal 

components requiring a 

permanent zinc-rich coating 

Galva Matt Galva Bright Galva Flash 

Outstanding long term 

corrosion protection 

for metal components 

requiring a permanent 

matt coating 

Excellent long term 

corrosion protection 

for metal components 

requiring a permanent 

bright coating 

Corrosion protection for 

metal components requiring 

a permanent bright, glossy 

appearance with the lustre 

of aluminium 

n Greater than 95% high 

purity zinc in the dry film 

n Zero corrosion following 

3500 hours salt spray 

n Temperature range 

–30˚C to 450˚C 

n Galvanic cell 

continues to 

protect bare metal 

when scratched 






–30˚C to 450˚C 






–30˚C to 450˚C 

n Contains zinc, 

aluminium, synthetic 

resins and additives 

n Zinc and aluminium 

blend for a permanent 

reflective metal 

appearance 

n Zero corrosion 

following 1000 

hours salt spray 


–30˚C to 450˚C 

Part No 

ROC-COLDGALVANISING-SPRAY 

Part No 

N/A 

Part No 

N/A 

Part No 

N/A 





212 

Degreasers and Lubricants 

The 

Maintenance Range 

Amberclens 

Anti-Static Foaming Cleaner 

n Removes tough, stubborn stains such 

as grease, grime, dirt and nicotine 

n Safe for use on plastics, metals, 

painted and glazed surfaces 

n Meets military, rail and automotive 

specifications 

n Available in a 750ml trigger spray or bulk 

Part No 

AMB-AMBERCLENS-400ML 

AMB-AMBERCLENST-750ML 

AMB-AMBERCLENST-5LTR 

size 

400ml 

750ml 

5ltr 

Tough Wipes 

n High absorbency hand cleaning wipe 

n Contains anti-bacterial agents, effective against most 

common bacteria (e.g. Weils Disease, E.Coli, etc) 

n Cleaner and towel in one convenient wipe 

n Contains skin conditioner to combat dermatitis 

n Hands dry rapidly leaving them clean 

and with virtually no odour 

n Highly effective on a range of 

soiling types – grease, oils, 

petrochemicals, paints, adhesives, 

tar, bitumen, resins, silicone 

Part No 

size 

AMB-TOUGHWIPE-30POUCH 30 

AMB-TOUGHWIPE-100/TUB 100 

40+ Multi-Purpose Lubricant 

n An engineers essential ‘cure-all’ product 

n Use as a lubricant, penetrating oil, and 

anti-corrosion treatment 

n Safe for use on paints, rubbers and 

plastics. Does not contain silicone 

n Multiple approvals: Rolls Royce Aerospace, 

British Rail, Ford Motor Co... 

Part No 

AMB-40+PROTECT-100ML 

AMB-40+PROTECT-400ML 

AMB-40+PROTECT-5LTR 



size 

100ml 

400ml 

5ltr 

25ltr 

200ltr 

Tufcut (Spray) – Now ‘Food Grade’ 

n ready to use metal cutting lubricant for 

‘right first time’ results 

n Dissipates heat and prevents chip welding 

n nSF H2 registered for use in the 

food/beverage/pharma industries 

n Allows heavier close tolerance cuts 

Part No 

AMB-TUFCUT SPRAY-400ML 

Also available in the Tufcut range: 

AMB-TUFCUT FOAM-300ML 

AMB-TUFCUT LIQUID-350ML 

AMB-TUFCUT LIQUID-5LTR 

AMB-TUFCUTCOMP-500G 

AMB-TUFCUTCOMP-5KG 

AMB-TUFCUTAQ-25LTR 

AMB-TUFCUTAQ-5LTR 

size 

400ml 

300ml 

350ml 

5ltr 

500g 

5Kg 

25ltr 

5ltr 

Amberklene FE10 

Fast Drying Solvent 

n A fast and effective cleaner/degreaser 

n Powerful flushing action, rapidly 

removes contaminants 

n Evaporates to leave a clean, dry surface 

n Safe for use on ferrous and non-ferrous 

metals and most plastics 

n Meets military specification NATO catalogue 

No. 6850-99-6636478 

Part No 

AMB-AMBERKLFE10-400ML 

AMB-AMBERKLFE10-5LTR 



Industrial Degreaser FG 

n NSF registered (A8 & K1) solvent degreaser with 

fast drying time and high solvency power 

n Ideal for use on bearings, chains, shafts, and motors 

n Ideal for use as a general purpose solvent cleaner 

with minimal odour 

n Non-corrosive and non-staining 

Part No 

AMB-INDDEGREASERFG-500ML 

AMB-INDDEGREASERFG-5LTR 

size 

400ml 

5ltr 

25ltr 

200ltr 

size 

500ml 

5ltr 



Attention 


213 

Cold Galvanise 

n A zinc-rich acrylic coating which offers 

excellent cathodic anti-corrosion protection 

n Zinc 99% pure, content 88% cured film 

n Suitable for use as renovation media as 

specified in BS EN ISO 1461:1999 

n Fast drying and xylene free 

n Can be welded through 

Bright, Cold Galvanise 

n Barrier coating protects metalwork and steels 

from corrosion 

n For use on bare non-rusted steel and seams 

n Suitable as primer, can be over-coated with 

acrylic, cellulose, alkyd, polyurethane-alkyd 

and epoxy paint systems 

n Fast drying 

Part No 

size 

Part No 

size 

AMB-GALVSPRAY-400ML 

400ml 

AMB-BRIGHTGALV-400ML 

400ml 

Acrylic Paint 

n A wide selection of RAL matched colours 

n Optimum blending of resin and pigments ensuring 

colours remain vibrant and metals protected 

n Fast drying with good hardening 

n Excellent flexibility, good adhesion to metal, wood, 

glass, paintable plastics, concrete and stone 

n Operational temperature range: –50°C to +120°C 

Chain Lube FG 

n A high performance, foaming, 

chain lubricant 

n NSF H1 registered (N°137998) 

n Good adhesion, even at elevated 

temperatures and high RPM 

n Excellent penetration 

n Leaves a tenacious, long lasting lubricating film 

n Prevents corrosion and resists water wash-off 

n Operating temperature from –15°C to +175°C 

Part No RAL Colour Machinery Colour RAL Ref. 

AMB-PAINTGREY-400ML Light Grey Rittal Grey 7035 

AMB-PAINTFORDBLUE-400ML Gentian Blue Ford Blue 5010 

AMB-PAINTJCBYEL-400ML Chrome Yellow JCB Yellow 1007 

AMB-PAINTMASRED-400ML Flame Red Massey Ferguson Red 3000 

AMB-PAINTJDGREEN-400ML Emerald Green John Deere Green 6001 

AMB-PAINTBELORG-400ML Pure Orange Belle Orange 2004 

AMB-PAINTMATTBLACK-400ML Matt Black 9011 

AMB-PAINTMATTWHITE-400ML Matt White 9010 

AMB-PAINTGLSBLACK-400ML Gloss Black 9005 

AMB-PAINTGLSWHITE-400ML Gloss White 9016 

AMB-PAINTBRTRED-400ML Bright Red 3002 

AMB-PAINTBLUE-400ML Blue 5015 

AMB-PAINTGREEN-400ML Green 6002 

AMB-PAINTBRTYELLOW-400ML Bright Yellow 1018 

AMB-PAINTGREY-400ML Battleship Grey 7032 

AMB-PAINTGREYPRIM-400ML Grey Primer 

AMB-PAINTCHRMSILVER-400ML Chrome Silver 

AMB-PAINTFLUROGRN-400ML Fluorescent Green 

AMB-PAINTFLUROYEL-400ML Fluorescent Yellow 

AMB-PAINTFLURORED-400ML Fluorescent Red 

AMB-PAINTFLUROCER-400ML Fluorescent Cerise 

Part No Product Packaging Size 

AMB-TUFCUT SPRAY-400ML Tufcut Spray RTU Aerosol 400ml 

AMB-TUFCUT LIQUID-350ML Tufcut Liquid RTU Bottle 350ml 

AMB-TUFCUT LIQUID-5LTR Tufcut Liquid RTU Bulk 5ltr 

AMB-TUFCUT FOAM-300ML Tufcut Foam RTU Aerosol 300ml 

AMB-TUFCUTCOMP-500G Tufcut Compound RTU Tin 500g 

AMB-TUFCUTCOMP-5KG Tufcut Compound RTU Tub 5kg 

AMB-TUFCUTAQ-5LTR Tufcut Aqua Bulk, water soluble, 

semi-synthetic 

5ltr 

AMB-TUFCUTAQ-25LTR Tufcut Aqua Bulk, water soluble 

semi-synthetic 

25ltr 

Part No 

AMB-CHAINFG-400ml 

size 

400ml 

Marker Pens – Standard, 

Steel Ball, and Solid 

n Industrial paint pens for marking on 

all types of surface: 

Regular ‘Marker Pen’ for smooth surfaces, 

‘Marker Pen HD’ for rusted steel and 

medium-coarse surfaces, and ‘Solid Marker’ 

for concrete, stone, wood, and other very 

rough surfaces. 

n Acrylic paint has excellent opacity so marks 

can been seen on even the darkest substrate 

n Long-lasting marks – will not was or rub off 

easily. Can be readily removed with a 

solvent degreaser. 

Part No 

AMB-PAINTMARKERWHT 

AMB-PAINTMARKERGRN 

AMB-PAINTMARKERYEL 

AMB-PAINTMARKERBLU 

AMB-PAINTMARKERRED 

AMB-PAINTMARKERORG 

AMB-PAINTMARKERBLK 

AMB-PAINTMARKERSIL 

AMB-PAINTMARKERGLD 

description 

Paint Marker Pen White 

Paint Marker Pen Green 

Paint Marker Pen Yellow 

Paint Marker Pen Blue 

Paint Marker Pen Red 

Paint Marker Pen Orange 

Paint Marker Pen Black 

Paint Marker Pen Silver 

Paint Marker Pen Gold 

Part No 

description 

AMB-PAINTMARKHDBLK-50ML Paint Marker HD Black 

AMB-PAINTMARKHDBLU-50ML Paint Marker HD Blue 

AMB-PAINTMARKHDGRN-50ML Paint Marker HD Green 

AMB-PAINTMARKHDRED-50ML Paint Marker HD Red 

AMB-PAINTMARKHDYEL-50ML Paint Marker HD Yellow 

AMB-PAINTMARKHDWHT-50ML Paint Marker HD White 

AMB-SOLIDMARKWHT-50ML Solid Marker White 

AMB-SOLIDMARKYEL-50ML Solid Marker Yellow 





215 

FL30 Lamp Tester 

A simple and cost effective solution for testing of gas filled lamps, the lightweight 

Martindale FL30 outputs a high frequency voltage at 3kV and comes complete 

with a telescopic antenna attachment for in-situ testing of neon and fluorescent 

lamps, ideal for testing of lamps when access and removal of the lamps for 

testing is an issue, comes with a convenient soft carry case. 

The FL30 can be used for testing the 

following types of gas filled lamps: 

n Fluorescent 

n Low and high pressure 

sodium vapour 

n Neon tubes 

n Mercury and metal halide 

n Includes carrying case, 

telescopic antenna, 

9V battery and 

instructions 

Part No 

MTDAMARFL30 

electRical SPECIFICATIONS 

Lamp test voltage: 3kV at 280kHz approx. 

(with new battery) 

Field strength: 100μV/m approx. 

GeneRAL SPECIFICATIONS 

Operating environment: 

–10°C to 50°C ≤ 70% R.H. 

Altitude: up to 2000m 

Power: Single standard 9 volt battery, 

IEC 6LR61, NEDA 1604 

Dimensions: 169 x 40 x 24 mm approx. 

Weight: 109g (battery included) approx. 

Includes: Carry case, telescopic antenna, 

9V battery, instructions. 

SAFETY 

Conforms to BS EN61010-1 CAT I 

Max 50V to earth 

Pollution Degree: 2 

emc: Conforms to BS EN61326 

See the light 

Have 

You Seen... 

The latest Electrical 

Catalogue from ERIKS 

Request your copy from your local 

service centre on 0845 006 6000 

ERIKS ELECTRICAL ISSuE No.5 

CoNTRoL AND AuToMATIoN 10-31 

SENSING AND DETECTIoN 32-47 

INDuSTRIAL CoNTRoL ACCESSoRIES 48-54 

Next day delivery nationwide 

No minimum order value 

Full technical support 

See th 

Industrial Controls 

PRoTECTIoN, ISoLATIoN AND SAFETY 56-65 

WIRING ACCESSoRIES 66-79 

CoNSuMABLES 80-97 

CABLES 98-105 

CABLE MANAGEMENT 106-113 

TEST EQuIPMENT 114-117 

TooLS 118-120 

Whether you want 

environment, redu 

emissions, or both 

Service will spotlig 

Whether you want to improve your working 

environment, reduce your energy use and CO2 

emissions, or both, ERIKS Lighting Design 

Service will spotlight the best solution for you. 

Wiring Lighting 

For more information contact 

ERIKS Electrical Centre 

LIGhT FITTINGS 122-134 

LAMPS AND TuBES 135-142 

01384 216243 

electrical.info@eriks.co.uk 

www.eriks.co.uk 

UNREGISTERED 

ERIKS ELECTRICAL 

over 10,000 electrical items in-stock 

Call 0845 006 6000 

Eriks ElEctrical 

call 0845 006 6000 


Over 10,000 electrical items in-stock 

industrial controls l Wiring l lighting 

For more information contact 

ERIKS Electrical Centre 

01384 216243 

electrical.info@eriks.co.uk 


Using industry-recognised l 

design software, ERIKS ca 

a proposal to meet your ne 

fu ly compliant with current 

and industry standards. 

Solutions range from onereplacements 

using moder 

efficient technology, to dim 

control and innovative wire 

communication. 

Using exclusively high-qu 

branded components, we 

a long service life and red 

whole life costs of any ins 



LIGHTING

216 

Testing Equipment 

IN2102 and IN2103 Multi-voltage 

Insulation and Continuity Tester 

IN2103 with PI and DAR 

The Martindale IN2102 is a fully 

specified insulation tester, with 

250, 500 and 1000V test ranges. 

n Analogue arc 

n 5000MΩ range 

n Audible continuity buzzer 

n Pass/fail indicator 

Part No 

MTDAMARIN2102 

description 

Insulation Tester 

The IN2103 adds polarisation index (PI) and 

dielectric absorption ratio measurements 

(DAR). These advanced tests allow for more 

accurate measurement of insulation values. 

Part No 

MTDAMARIN2103 

description 

Insulation and Continuity Tester 

HPAT500KIT1 and HPAT600KIT1 

Hand-held PAT Tester Kits 

A complete solution for entry level PAT testing 

with everything you need to get started. 

Includes: 

n HPAT500 tester 

n CP501 Check Plug 

n VT2 Voltage Indicator 

n Pass labels (500) 

n Fail labels (100) 

n PAT register booklet 

n Batteries 

n 230V extension lead adaptor (EX332) 

n Mains charger (PSUHPAT230) 

Part No 

MTDAMARHPAT500KIT1 

The HPAT600KIT1 replaces the HPAT500 

with the HPAT600 but also includes the 

same set of useful accessories. 

Part No 

MTDAMARHPAT600KIT1 

description 

PAT Tester Kit 

description 

PAT Tester Kit 

HPAT500 and HPAT600 

Hand-held PAT Testers 

n Low cost PAT tester 

n Class I, Class II, lead test 

n 200mA earth bond – IT safe 

n 500V insulation test 

n Pass/fail indications 

n Rechargeable batteries 

Part No 

MTDAMARHPAT500 

description 

Hand-Held PAT Tester 

The HPAT600 adds 250V insulation test, 

user adjustable pass limits, backlight and 

in-car charger to the HPAT500. 

Part No 

MTDAMARHPAT600 

description 

Hand-Held PAT Tester 

VT2 Non-Contact 

Voltage Indicator 

The VT2 is a non-contact voltage indicator 

for voltages between 200 and 1000 volts. 

It can check for the presence of AC 

voltage in wall sockets, cables, circuit 

breakers and many other places. 

It is safe, easy to use and comfortably 

fits in a shirt pocket. 

A red light in the tip illuminates 

when AC volts are detected. 

VT3 Non-Contact Voltage and 

Magnetic Field Indicator 

The VT3 is a non-contact voltage 

and magnetic indicator. 

In addition to voltage detection 

a green light illuminates to 

show the presence of a 

magnetic field. 

VI13700 Voltage Indicator 

Before doing any electrical work it is essential 

to be absolutely certain the circuit is dead. 

This GS38 compliant voltage indicator 

rapidly and safely checks for AC and DC 

voltages from 50V to 600V. 

Includes: 

n Industry standard 

voltage indicator 

n Fully GS38 compliant 

n Heavy duty double 

insulated leads 

n Bright LEDs 

n Polarity Indication 

Part No 

description 

Part No 

description 

Part No 

description 

MTDAMARVT2 

Non-Contact Voltage Indicator 

MTDAMARVT3 

Voltage and Magnetic Indicator 

MTDAMARVI13700/2 

Voltage Indicator 

LIGHTING 

Go 


217 

VIPD Voltage Indicator 

and Proving Unit 

Safe electrical work requires the use of 

a voltage indicator that has been proved 

before and after use. 

The Martindale VIPD 

contains the 

VI137002 

voltage indicator 

and the PD440 

proving unit, so 

you can comply 

with health and safety 

recommendations for 

safe working. 

PD440 Proving Unit 

Using a voltage indicator without 

first proving it can be 

fatal. The Martindale 

PD440 is a 440V AC 

proving unit, designed to 

enable voltage indicators 

to be fully checked in 

compliance with 

Health and Safety 

recommendations. The 

PD440 is compatible with the 

Martindale voltage indicators, Drummond 

Lamps and many other indicators. 

TL45 Test lead 

n Red and black probe with 

lantern tips and probe caps 

n Supplied with 

crocodile clips 

n Right angled 4mm 

banana plugs 

Part No 

description 

MTDAMARTL45 

Test Leads 

TL47 Test lead 

As TL45 but with straight banana plugs. 

Part No 

description 

Part No 

description 

Part No 

description 

MTDAMARVIPD 

Voltage Indicator Proving Unit 

MTDAMARPD440 

Proving Unit 

MTDAMARTL47 

Test Leads 

MARLOKKIT1 Lock-off Kit PSI4000 Phase Rotation Indicator CM54 1000A AC Clamp Meter 

The Martindale universal lock-off kit is 

compatible with most circuit breakers. It is 

supplied with a padlock with a unique key, 

and a safety hasp that enables multiple users 

to lock off with space for up to 6 padlocks. 

The Martindale PSI4000 is a unique 

phase rotation indicator that works via 

inductive crocodile clips. This increases 

the safety of the user and the bright 

LEDs give a clear indication of 

clockwise or anti-clockwise rotation. 

A low cost 1000A AC clamp meter, with 

basic multimeter functions. Capable of 

clamping a 70 x 18mm busbar. 

Along with AC current, it also measures 

AC and DC volts, resistance and 

continuity. Includes Max and Hold buttons. 

n AC current 100mA – 1000A 

n 750V AC, 1000V DC 

n 2000MΩ resistance range 

n Audible continuity 

n Jaw diameter 57mm 

n Supplied with standard test 

leads, carry case and battery 

Part No 

description 

Part No 

description 

Part No 

description 

MTDAMARLOKKIT1 

Lock-Off Kit 

MTDAMARPSI4000 

Phase Rotation Indicator 

MTDAMARCM54 

1000A AC Clamp Meter 

MM44 General Purpose Multimeter 

This is our best selling manual ranging multimeter. With 11 functions, including 

a 10A range, and a basic accuracy of 0.8%, this is a great all-round multimeter. 

n 600V AC/DC 

n 15MHz frequency 

n 10A AC/DC 

n 20μF capacitance 

n 2000MΩ resistance 

n Continuity 

n Logic, diode, transistor 

and battery tests 

Part No 

MTDAMARMM44 

description 

Multimeter 

Multimeters 

Part No 

MTDAMARMM64 

MTDAMARMM65 

MTDAMARMM68 

description 

Multimeter 

Multimeter 

True RMS Multimeter 

Part No DCV ACV Ω aca dca Frequency Capacitance True RMS 

MM64 0.1mV-600V 0.1mV-600V 0.1Ω-20MΩ 0.1μ- 200mA 0.1μ-200mA ✓ ✓ ✗ 

MM66 0.1mV-600V 1mV-600V 0.1Ω-34MΩ 0.1μA-10A 0.1μ-10mA ✗ ✗ ✗ 

MM68 0.01mV-1000V 0.01mV-750V 0.01Ω-220MΩ 0.01A-10A 0.1-10mA ✓ ✓ ✓ 



LIGHTING

tools and maintenance - Eriks UK

Create successful ePaper yourself

Delete template?

Save as template?