Digital Catalog - Airaid

U-BUILD-IT COMPONENTS
U-BUILD-IT COMPONENTS
UBI INTAKE SYSTEMS
If you can imagine a custom intake system, now you can build
it! The U-Build-It (UBI) kit is the most versatile custom intake
system on the market. Our master kits include everything you
need to build a complete system, and all components are also
available individually for maximum adaptability. Whether you are
doing an engine swap or have a custom application where space
is tight, the AIRAID ® UBI Intake System can accommodate just
about any application. The only limitation is your imagination!
Each UBI master kit and individual intake tubes are available in
3”, 3.5”, 4”, 5”, and 6” diameters. The roto-molded intake tubes
feature multiple angles and straights that allow you to route the
intake to any desired location in the engine compartment. The
master kits include an intake tube, coupler, hump hose, reducer,
brackets, hose clamps, hardware, and a premium AIRAID ® filter.
1967-1969 F-Body
• 3”, 3.5” & 4” diameter filter
adapters available!
• Driver and Passenger sides
also available.
REDUCERS
HUMP HOSES
FILTER ADAPTERS
COUPLERS
CARBURETOR HATS
P/N 200-100 P/N 300-100
Thousands
of intake variations are
possible! Available separately,
as tubes only, or as master kits,
which include: premium filter,
couplers, clamps, brackets
and hardware pack.
COMPONENTS
While a UBI master kit is recommended for anyone building a custom
intake system from scratch, sometimes completing a custom intake
might require a few extra couplers, or perhaps an extra bend. To address
this, AIRAID ® offers all of the UBI components individually. All of the
UBI intake tube straights and bends are available as individual pieces,
as well as couplers, hump hoses, clamps, filter adapters, and so on.
AIRAID ® also has a wide selection of filters in different sizes that are
compatible with all of the UBI systems.
In addition to individual components, AIRAID ® offers several
specialty components. Four different carburetor hats are compatible
with many EFI throttle bodies and most popular performance
carburetors. AIRAID ® also has a growing line of applicationspecific
Cold Air Dam Systems, including kits that fit GM A-body and
F-body cars.
BRACKETS, HOSE CLAMPS
Designed to be used in conjunction with AIRAID’s other UBI
system components, AIRAID’s new A-Body and F-Body Cold
Air Dam Systems allow the air filter to be mounted on either the
driver or passenger side of the engine compartment. The metal
Cold Air Dam design keeps the air filter isolated from hot engine
compartment air while allowing the engine to breathe in plenty of
cold, fresh outside air. The built-in velocity stack further promotes
airflow, and different versions of the kit can accommodate 3”, 3.5”,
and 4” intake tubes. The kit also includes an oversize air filter that
utilizes AIRAID’s oiled filter media.
1968-1972 A-Body
• 3”, 3.5” & 4” diameter filter adapters available!
• Driver and Passenger sides also available.
P/N 100-525 P/N 100-725
800-498-6951
28 29