Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
REWORK/REPAIR PENS<br />
Step 1<br />
Flux Remover Pen<br />
EASY 3 STEP PROCESS<br />
FOR BOARD REPAIR<br />
Step 2<br />
Conductive Pen<br />
Step 3<br />
Overcoat Pen<br />
Work tip over the area to be cleaned until <strong>flux</strong>es,<br />
contaminants and soils are removed.<br />
Repairs traces, links components, and makes<br />
smooth jumpers with simple pen strokes.<br />
After conductive trace is cured use the Overcoat<br />
Pen for the protection of repaired trace.<br />
TraceTech board repair system allows any level of technician to quickly perform quality board repairs in-house without the use of<br />
expensive equipment or time-consuming and unsightly jumpers. Meets IPC board repair standards. Other TraceTech pens are<br />
available to allow quick, convenient, and high quality board repair and rework.<br />
2506<br />
FLUX REMOVER PEN<br />
Provides convenient touch-up cleaning of <strong>flux</strong> residues.<br />
Cleans R, RMA, SA, and no-clean <strong>flux</strong>es.<br />
• Safe on Plastics<br />
• Rapid Evaporation<br />
• Pen Tip Allows Controlled Application<br />
Specifications: Meets IPC Standard 7711 and ANSI J Standard 001C for circuit<br />
board repair and rework<br />
2506-N Single-pack of 11.5 ml pen<br />
2506-N100 100 pack of 11.5 ml pens<br />
Also available:<br />
1610-N 10ml IPA pen — see pg 5 for details<br />
2509<br />
OVERCOAT PEN<br />
Green acrylic conformal coating insulates circuit board traces<br />
and components against high voltage arcing. Provides<br />
excellent protection from moisture and fungus.<br />
• Repairs Solder Resist<br />
• Green to Match Resist<br />
• Prevents Shorting and Arcing<br />
• Contain Opti/Scan for UV Inspection<br />
Specifications: Meets IPC Standard 7711 and ANSI J Standard 001C for circuit<br />
board repair and rework.<br />
2509-GN Single-pack of 5 ml pen<br />
2505<br />
CONDUCTIVE PEN<br />
Contains a fast drying, silver filled ink designed to quickly<br />
make highly conductive silver traces.<br />
• Repairs Traces<br />
• Makes Smooth Jumpers<br />
Specifications: Meets IPC Standard 7711 and ANSI J Standard 001C for circuit<br />
board repair and rework.<br />
2505-N Single-pack of 4.9 ml pen<br />
2507<br />
NO-CLEAN FLUX DISPENSING PEN<br />
Resin and halide-free no-clean <strong>flux</strong> has excellent wetting<br />
abilities and leave no problematic residues. Excellent for<br />
prototyping, rework, and repair and to provide extra wetting<br />
for lead-free wire solder.<br />
• Excellent Wetting<br />
• Works with Lead and Lead-Free Solders<br />
• No Cleaning Necessary<br />
• Boost Wetting for Lead-Free Wire Solder<br />
Specifications: Meets IPC Standard 7711 and ANSI J Standard 001C for circuit<br />
board repair and rework.<br />
2507-N Single-pack of 11.5 ml pen<br />
2507-N100 100 pack of 11.5 ml pens<br />
22<br />
For more information: 800-858-4043 - tsales@techspray.com<br />
MSDS / Specs: www.techspray.com
Change language