to view. (5.2 Mb - pdf) - Fastener Technology International
to view. (5.2 Mb - pdf) - Fastener Technology International
to view. (5.2 Mb - pdf) - Fastener Technology International
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Focused News, Information and Products for<br />
<strong>Fastener</strong> Distribu<strong>to</strong>rs, Importers, Manufacturer’s<br />
Representatives, OEMs and End Users.<br />
Also in this issue...<br />
• Pre<strong>view</strong> of NIFS/WEST,<br />
including Spotlights<br />
• Coating <strong>Technology</strong><br />
• Stainless Steel Primer<br />
• Au<strong>to</strong>motive <strong>Fastener</strong>s<br />
• How One Manufacturer<br />
is Weathering the<br />
Recession<br />
• Retaining Rings<br />
• Eliminating Recess<br />
Fill in Au<strong>to</strong>motive<br />
Applications<br />
• Focus on Quality<br />
• FF News & Products<br />
Oc<strong>to</strong>ber 2009<br />
Presented by...<br />
www.fastenertech.com<br />
Untitled-3.indd 1<br />
12/3/2010 12:15:40 PM<br />
2014<br />
MEDIA KIT<br />
Print and Digital Editions<br />
OCTOBER/NOVEMBER 2009 FASTENER TEChNOlOgy INTERNATIONAl Vol. XXXII, No.5<br />
PACKAGING...P. 38<br />
Serving Manufacturers, Distribu<strong>to</strong>rs and End Users<br />
The Role of Testing in <strong>Fastener</strong><br />
Design & Manufacturing...P. 22<br />
ROUNDUP: INFORMATION SYSTEMS &<br />
SIMULATION...P. 28-31<br />
AUTOMOTIVE FASTENERS...97<br />
NIFS/WEST IN LAS VEGAS...PAGE 76<br />
OCTOBER/NOVEMBER 2009<br />
ROUNDUP: COATINGS & PLATINGS...P. 42-47<br />
<strong>Fastener</strong><br />
Focus<br />
P. 59<br />
<strong>Fastener</strong><br />
Focus<br />
Focused News, Information and Products for<br />
<strong>Fastener</strong> Distribu<strong>to</strong>rs, Importers, Manufacturer’s<br />
Representatives, OEMs and End Users.<br />
December 2009<br />
Presented by...<br />
www.fastenertech.com<br />
Also in this issue...<br />
• Redefining Value <strong>to</strong><br />
Build Efficiencies<br />
• Straight From The<br />
Show: NIFS/WEST 2009 <strong>Fastener</strong>s offer new screw locking<br />
& ratcheting system ...pg. 70<br />
• What the Termination<br />
of Duty Investigations<br />
Means <strong>to</strong> Your Firm<br />
• Revolutionary<br />
<strong>Fastener</strong> Design<br />
• <strong>Fastener</strong> Sec<strong>to</strong>r<br />
Shows Resilience at<br />
A look back at NIFS/WEST in Vegas ...pg. 64<br />
Stuttgart Trade Show<br />
Over<br />
10 million ft 2<br />
• Spotlight on<br />
of warehouse<br />
space ...pg. 63<br />
Plastic <strong>Fastener</strong>s<br />
• FF News & Products<br />
BUYERS’ GUIDE<br />
2011<br />
The handy single-source reference direc<strong>to</strong>ry for the entire fastener industry<br />
BUYERS’ GUIDE<br />
Initial Publications ● 1867 W. Market St. ● P.O. Box 5452 ● Akron, OH 44313 USA<br />
PH: +1 330 864 2122 ● FAX: +1 330 864 5298 ● www.fastenertech.com<br />
Manufacturer<br />
Identification<br />
Symbols<br />
INTERNATIONAL GUIDE<br />
Delivering the world of fasteners <strong>to</strong> Manufacturers, Distribu<strong>to</strong>rs and End Users<br />
www.fastenertech.com
2014<br />
EDITORIAL CALENDAR<br />
MONTH EMPHASIS ROUNDUP SPOTLIGHTS BONUS** AD CLOSINGS<br />
FEBRUARY<br />
Top Products of 2013<br />
wire 2014 Pre<strong>view</strong><br />
<strong>Fastener</strong> Fair<br />
Hannover Pre<strong>view</strong><br />
Tooling (Cold Forming,<br />
Thread Rolling, Tapping)<br />
Threadlocking &<br />
Locknut<br />
Heat Treatment<br />
wire 2014<br />
<strong>Fastener</strong> Fair<br />
Hannover<br />
January 31<br />
APRIL<br />
Screw Machines<br />
Cold Forming<br />
Retaining Rings<br />
Parts Washing<br />
Taiwan <strong>International</strong><br />
<strong>Fastener</strong> Show<br />
March 21<br />
JUNE<br />
Sorting & Inspection<br />
Thread Rolling<br />
Equipment<br />
Au<strong>to</strong>motive <strong>Fastener</strong>s<br />
Materials<br />
(Wire, Rod, Bar)<br />
MWFA Table Top Show<br />
May 16<br />
AUGUST<br />
Company Profiles<br />
Simulation &<br />
Information Systems<br />
<strong>Fastener</strong> Fair<br />
Thailand Pre<strong>view</strong><br />
Rebuild & Upgrade<br />
Feeding Devices<br />
Secondary Operations<br />
Supply Chain<br />
Integration*<br />
Company Profiles<br />
July 18<br />
OCTOBER<br />
Coating & Plating<br />
National Industrial<br />
<strong>Fastener</strong> & Mill Supply<br />
Expo Pre<strong>view</strong><br />
Packaging<br />
Process Control<br />
Aerospace <strong>Fastener</strong>s*<br />
National Industrial<br />
<strong>Fastener</strong> & Mill<br />
Supply Expo<br />
September 12<br />
DECEMBER<br />
Environmental<br />
Technical<br />
Achievement Awards<br />
Lubricant & Surface<br />
Prep<br />
Head Painting &<br />
Powder Coating<br />
Test/Gaging/QC<br />
Structural <strong>Fastener</strong>s*<br />
November 14<br />
* <strong>Fastener</strong> Focus Spotlight<br />
** Bonus Distribution of the magazine at various fastener industry trade shows or conferences.<br />
FASTENER<br />
FOCUS is a special<br />
magazine-in-a-magazine<br />
section directed <strong>to</strong><br />
the distribution, OEM<br />
and end-user segments<br />
of the fastener industry<br />
featured in all issues.<br />
COMPANY PRO-<br />
FILES<br />
August 2014 issue.<br />
Full and half page<br />
advertisers receive<br />
a complimentary<br />
Company Profile in a<br />
special bound section<br />
of the August issue.<br />
SPOTLIGHTS<br />
Staff written articles on<br />
a selected product(s)<br />
or trade show(s).<br />
Each advertiser of<br />
the selected <strong>to</strong>pic will<br />
receive a free Spotlight<br />
Ad including contact<br />
information and logo.<br />
www.fastenertech.com
2014 ADVERTISING RATES<br />
Reach the <strong>Fastener</strong> Industry with the Leading Publication!<br />
AD SIZE DIMENSIONS 1X 3X 6X 9X 12X<br />
FULL PAGE 7″ x 10″ $2335 $2295 $2170 $2130 $1940<br />
2/3 PAGE 4.5″ x 10″ $1935 $1905 $1810 $1780 $1645<br />
1/2 PAGE ISLAND* 4.5″ x 7.5″ $1680 $1605 $1515 $1440 $1345<br />
1/2 PAGE see specs $1485 $1440 $1345 $1250 $1220<br />
1/3 PAGE see specs $1220 $1165 $1080 $1040 $955<br />
1/4 PAGE 3.375″ x 4.875″ $990 $945 $910 $855 $685<br />
1/6 PAGE see specs $650 $635 $61 $570 $525<br />
* Only ad on page<br />
All rates, US$, per insertion<br />
• Black and one standard AAAA (red, blue, yellow or green),<br />
extra per page or less.............................................................$320<br />
• Black and one matched color (other than metallic),<br />
extra per page or less.............................................................$420<br />
• Black and one metallic color,<br />
extra per page or less.............................................................$475<br />
Rates include 4-Color Process. Non-Cancelable<br />
FRONT COVER NOT SOLD<br />
Inside Front Cover...................................................................$4015<br />
Inside Back Cover....................................................................$3885<br />
Back Cover...............................................................................$4190<br />
• 4-Color Process,<br />
extra per page or less............................................................$995<br />
• 4-Color Process,<br />
extra per spread....................................................................$1575<br />
• Preferred advertising material is a high resolution PDF.<br />
• All graphics must be a minimum of 300 dpi.<br />
• Color should be prepared as CMYK.<br />
Your insertions in <strong>Fastener</strong> <strong>Technology</strong> <strong>International</strong><br />
will apply <strong>to</strong>ward your frequency in the Wire and<br />
Cable <strong>Technology</strong> <strong>International</strong> magazine, Wire<br />
Forming <strong>Technology</strong> <strong>International</strong> magazine, Wire &<br />
Cable <strong>Technology</strong> <strong>International</strong> Buyers’ Guide and the<br />
<strong>Fastener</strong> <strong>Technology</strong> <strong>International</strong> Buyers’ Guide.<br />
• When designing material, please incorporate the bleed<br />
dimensions as supplied under the mechanical specifications.<br />
• Material may be submitted on CD-ROM or via email.<br />
10% premium over black and white rate earned.<br />
www.fastenertech.com
2014<br />
MECHANICAL SPECIFICATIONS<br />
Full 2/3 1/2<br />
Page<br />
1/2<br />
Page<br />
1/2<br />
Page<br />
1/3<br />
Page<br />
1/3<br />
Page<br />
1/4<br />
Page<br />
1/6<br />
Page<br />
1/6<br />
Page<br />
SPACE UNITS<br />
DEPTH<br />
WIDTH & DEPTH WIDTH &<br />
Full Page 7 x 10 178 x 254<br />
2/3 Page 4.5 x 10 114 x 254<br />
Horizontal 7 x 4.875 178 X 124<br />
1/2 Page Vertical 3.375 x 9.75 86 x 248<br />
1/2 Page Island 4.5 x 7.5 114 x 190<br />
1/3 Page Vertical 2.1875 x 10 56 x 254<br />
1/3 Page Square 4.5 x 4.875 114 x 124<br />
1/4 Page Vertical 3.375 x 4.875 86 x 124<br />
1/6 Page Vertical 2.1875 x 4.875 56 x 1241/2 Page<br />
1/6 Page Horizontal 4.5 x 2.3125 114 x 59<br />
STOCK<br />
45lb. coated body s<strong>to</strong>ck.<br />
BINDING<br />
<strong>Fastener</strong> <strong>Technology</strong> <strong>International</strong> is Perfect Bound.<br />
STORAGE<br />
Reproduction materials will be s<strong>to</strong>red for a period of one year after last use. After this period,<br />
we will assume that we have the authority <strong>to</strong> discard them.<br />
BLEED ADS<br />
When preparing bleed ads, all type and portions of illustrations that are not <strong>to</strong> be trimmed off<br />
should be at least 1/4″ (6.3 mm) inside dimensions specified for bleeds. This includes gutter<br />
bleeds. Ads should bleed 1/8″ past trim on the left, right, <strong>to</strong>p and bot<strong>to</strong>m.<br />
BANNER ADS<br />
TRIM SIZE:<br />
8″ x 10.75″<br />
WEB ADVERTISING<br />
Banner ads are available for posting in three sizes:<br />
Standard size - center column & masthead, 500x75 pixels.<br />
Right column - 200 pixels wide, height is variable.<br />
Left column - 140 pixels wide, height is variable.<br />
We accept .jpg, .gif, .png and flash files. Other sizes, video and specialty ads are also<br />
available. Contact us for more information and options.<br />
For file construction<br />
All our publications are using computer-<strong>to</strong>-plate<br />
technology.<br />
Mechanical specifications are the same for Wire &<br />
Cable <strong>Technology</strong> <strong>International</strong>, <strong>Fastener</strong> <strong>Technology</strong><br />
<strong>International</strong> and Wire Forming <strong>Technology</strong> <strong>International</strong><br />
magazines.<br />
Press ready PDF’s are preferred, 300 dpi.<br />
Create files in Adobe Pho<strong>to</strong>shop, InDesign or<br />
Illustra<strong>to</strong>r.<br />
Graphic files saved as TIFF, JPEG or EPS are<br />
preferred.<br />
Microsoft Word, Publisher and Powerpoint files<br />
are not acceptable.<br />
Files may be emailed or sent via CD.<br />
Trim size is 8″ x 10.75″.<br />
Create the advertisement <strong>to</strong> match the page size<br />
of the publication (8″ x 10.75″) without the need<br />
<strong>to</strong> reduce or enlarge the file.<br />
Make sure that any element that bleeds is large<br />
enough <strong>to</strong> accommodate the bleed.<br />
If ad bleeds, extend bleeds out 0.125″ on all<br />
sides.<br />
Do not run critical copy <strong>to</strong>o close <strong>to</strong> trim area.<br />
All raster images should have a minimum<br />
resolution of at least 300 dpi.<br />
Use Adobe InDesign or Illustra<strong>to</strong>r instead of<br />
Pho<strong>to</strong>shop <strong>to</strong> set large quantities of text.<br />
Convert all fonts <strong>to</strong> outlines, including those in<br />
imported graphics, especially if using a TrueType<br />
font.<br />
Create the file in CMYK before saving.<br />
www.fastenertech.com
Untitled-3.indd 1<br />
2010Cover.indd 1<br />
Initial Publications ● 1867 W. Market St. ● P.O. Box 5452 ● Akron, OH 44313 USA<br />
PH: +1 330 864 2122 ● FAX: +1 330 864 5298 ● www.fastenertech.com<br />
<br />
<br />
12/3/2010 12:15:40 PM<br />
10/26/2009 2:44:08 PM<br />
• <strong>Fastener</strong> Focus<br />
• FTI Buyers’ Guide<br />
• WCTI Buyers’ Guide<br />
(Checklist and Contact Forms)<br />
• Manufacturers ID Guide<br />
• Torque Tensioning Tables<br />
• Wire & Cable <strong>Technology</strong> Int’l<br />
• WCTI Over<strong>view</strong> Newsletter<br />
• Wire Forming <strong>Technology</strong> Int’l<br />
The <strong>Fastener</strong> Manufacturer<br />
Identification Symbols<br />
<strong>International</strong> Guide is the most<br />
needed quality document<br />
available. The current, accurate<br />
and completed guide with over<br />
2100 companies in over 40<br />
countries are represented. A<br />
must have for everyone charged<br />
with identifying inven<strong>to</strong>ry!<br />
2010<br />
Manufacturer<br />
Identification<br />
Symbols<br />
INTERNATIONAL GUIDE<br />
Digital versions now online! The<br />
current edition is posted on the<br />
website www.fastenertech.com.<br />
Subscriptions are free!<br />
Internet Spotlights online<br />
advertisers will receive a<br />
one-time print insertion of<br />
website image and a<br />
12-month listing at<br />
www.fastenertech.com<br />
for only $500.<br />
The Edi<strong>to</strong>r’s Report,<br />
updated every business<br />
day, links <strong>to</strong> news and<br />
commentaries of<br />
interest <strong>to</strong> fastener<br />
industry professionals.<br />
Electronic Advertising<br />
options are now<br />
available on our<br />
homepage. Internet<br />
traffic has increased as<br />
a growing number of<br />
subscribers worldwide<br />
are requesting digital<br />
issues. Have your<br />
company get noticed<br />
<strong>to</strong>day!<br />
Horizontal:<br />
500 wide x 72 deep<br />
Vertical: 175 wide<br />
(dimensions in pixels)<br />
BUYERS’ BUYERS’ GUIDE GUIDE<br />
2011 2010<br />
2010<br />
Manufacturer<br />
Identification<br />
Symbols<br />
INTERNATIONAL GUIDE<br />
The handy single-source reference direc<strong>to</strong>ry for the entire fastener industry<br />
The handy single-source reference direc<strong>to</strong>ry for the entire fastener industry<br />
BUYERS’ GUIDE<br />
BUYERS’<br />
GUIDE<br />
<strong>Fastener</strong> Tech , the biennial “All-<strong>Fastener</strong> Industry<br />
Event in the Heart of the <strong>Fastener</strong> Industry” is an<br />
exhibit and educational venue created <strong>to</strong> bring all<br />
major fastener industry disciplines, including fastener<br />
manufacturers, distribu<strong>to</strong>rs and users, <strong>to</strong>gether in<br />
one great event.<br />
Designed <strong>to</strong> reflect the ongoing changes in the North<br />
American fastener industry, <strong>Fastener</strong> Tech will be<br />
held in June 2015 at the Donald E. Stephens<br />
Convention Center in Rosemont (Chicago), IL, USA.<br />
Contact Tom Hutchinson: tlh@fastenertech.com or<br />
Chip Lippincott: chip@fastenertech.com for exhibit<br />
sales.<br />
Michael McNulty, V.P. & Edi<strong>to</strong>r<br />
Send all edi<strong>to</strong>rial inquiries and submissions <strong>to</strong><br />
mcnulty@fastenertech.com<br />
Jim Masar, Senior Edi<strong>to</strong>r<br />
jam@fastenertech.com<br />
Tom Hutchinson, V.P. Sales<br />
Send all advertising inquiries <strong>to</strong><br />
tlh@fastenertech.com<br />
Chip Lippincott, Publisher<br />
chip@fastenertech.com<br />
Send all Buyers’ Guide inquiries and<br />
Manufacturers’ Symbols <strong>to</strong><br />
buyersguide@fastenertech.com<br />
www.fastenertech.com
August 2008<br />
Focused News, Information and Products for<br />
<strong>Fastener</strong> Distribu<strong>to</strong>rs, Importers, Manufacturer’s Presented by...<br />
Representatives, OEMs and End Users.<br />
www.fastenertech.com<br />
Also in this issue...<br />
• Emphasis on Head<br />
Painting:<br />
Cosmetic Paint,<br />
Adding Value<br />
• Show Recaps:<br />
MWFA, NIFS/EAST &<br />
<strong>Fastener</strong> Fair<br />
• Helping Cus<strong>to</strong>mers<br />
Respond <strong>to</strong><br />
Market Volatility<br />
• Spotlight on<br />
Secondary<br />
Operations<br />
• The FQA or<br />
Buyer Beware? Serving, Providing, and Delivering<br />
• News & Products Better Than Ever!<br />
• How One Manufacturer<br />
is Weathering the<br />
Rece sion<br />
• Retaining Rings<br />
• Eliminating Rece s<br />
Fi l in Au<strong>to</strong>motive<br />
A plications<br />
• Focus on Quality<br />
• F News & Products<br />
Presented by .<br />
w.fastenertech.com<br />
Oc<strong>to</strong>ber 2 09<br />
Aerospace in<br />
Rockford<br />
Lock Nuts<br />
Presented by...<br />
June 2 08<br />
ww.fastenertech.com<br />
AUGUST/SEPTEMBER 2008<br />
Serving Manufacturers, Distribu<strong>to</strong>rs and End Users<br />
Serving Manufacturers, Distribu<strong>to</strong>rs and End Users<br />
JUNE/JULY 2008<br />
MAGAZINE OVERVIEW<br />
HEAD PAINTING EMPHASIS...<br />
PAGES 162-166<br />
OCTOBER/NOVEMBER 2009 FASTENER TEChNOlOgy INTERNATIONAl Vol. XXX I, No.5<br />
Page 44...Rebulding &<br />
Upgrading Roundup<br />
Trade Show recaps...<br />
Pages 168, 172, 176<br />
Major Commitment <strong>to</strong> a<br />
Changing Industry...p. 30<br />
• Environment<br />
Spotlight...P. 54<br />
• Company Profiles...P. 71<br />
•Secondary Operations<br />
Spotlight...P. 174<br />
Serving Manufacturers, Distribu<strong>to</strong>rs and End Users<br />
The Role of Testing in <strong>Fastener</strong><br />
Design & Manufacturing...P. 22<br />
PACKAGING...P. 38<br />
ROUNDUP: INFORMATION SYSTEMS &<br />
SIMULATION...P. 28-31<br />
AUTOMOTIVE FASTENERS...97<br />
NIFS/WEST IN LAS VEGAS...PAGE 76<br />
P. 131 & 160<br />
<strong>Fastener</strong><br />
Focus<br />
EARNEST<br />
<strong>Fastener</strong><br />
Focus<br />
Also in this i sue .<br />
• Pre<strong>view</strong> of NIFS/WEST,<br />
including Spotlights<br />
• Coating <strong>Technology</strong><br />
• Stainless Steel Primer<br />
• Au<strong>to</strong>motive <strong>Fastener</strong>s<br />
IFI Online Technical<br />
Information is Here...p. 70<br />
OCTOBER/NOVEMBER 2009<br />
ROUNDUP: COATINGS & PLATINGS...P. 42-47<br />
Focused News, Information and Products for<br />
<strong>Fastener</strong> Distribu<strong>to</strong>rs, Importers, Manufacturer’s<br />
Representatives, OEMs and End Users.<br />
Page 48...Thread Rolling Roundup<br />
P. 59<br />
Straight From The<br />
Show...Pages 38-43<br />
Spotlights:<br />
• CHQ Wire...P. 68<br />
• Threadlocking...P. 110<br />
<strong>Fastener</strong><br />
Focus<br />
Focused News, Information and Products for<br />
<strong>Fastener</strong> Distribu<strong>to</strong>rs, Importers, Manufacturer’s<br />
Representatives, OEMs and End Users.<br />
Also in this i sue ..<br />
• How <strong>to</strong> Ch ose the<br />
Right Pre-Applied<br />
Thread Locker<br />
• Returning <strong>to</strong><br />
• The Ana<strong>to</strong>my of<br />
Making a<br />
Threaded <strong>Fastener</strong><br />
• Assuring Joint<br />
Integrity in Poland<br />
• Spotlight On<br />
Threadlockers &<br />
• News & Products<br />
P. 79 & 98<br />
<strong>Fastener</strong> <strong>Technology</strong> <strong>International</strong> (FTI) prides itself on more than 30<br />
years of service <strong>to</strong> the fastener industry. In each issue, we bring over<br />
13,000 readers a wide range of information on the fastener and precision<br />
formed parts industries. FTI has a clear claim as being one of<br />
the most influential forces in the industry. In an effort <strong>to</strong> improve our<br />
readers competitiveness in the marketplace, we provide departments<br />
and features that present new methods, technology, information and<br />
ideas. FTI is the only important information source meeting the unique<br />
technological and management needs of professionals in the fastener<br />
industry. As the best-read publication serving the fastener industry, FTI<br />
offers advertisers an in-depth, business-minded, audited readership <strong>to</strong><br />
manufacturing, distribution, OEM and end-user industry professionals.<br />
INSIDE<br />
<strong>Fastener</strong> <strong>Technology</strong><br />
<strong>International</strong><br />
Send articles and company/product information <strong>to</strong> the edi<strong>to</strong>r, Michael McNulty,<br />
at mcnulty@fastenertech.com.<br />
• Edi<strong>to</strong>rial— Current Views from the Edi<strong>to</strong>r<br />
• Calendar of Events<br />
• Feature Articles<br />
• Tech Briefs<br />
• Roundups<br />
• Product Showcases— Machinery, Accessories and Materials<br />
• Corporate News<br />
• Industry News<br />
• Spotlights<br />
• Trade Show and Conference Pre<strong>view</strong>s<br />
• Metallurgical Reminders column— Dr. Roger N. Wright<br />
• Inside the Lean House column— Michael Coyne<br />
• IFI Update column— Joe Greenslade<br />
• The Bolt Doc<strong>to</strong>r column— Guy Avellon<br />
• <strong>Fastener</strong> Focus— focused news, information ad products for<br />
distribu<strong>to</strong>rs, importers, reps, OEMs and end users.<br />
• “Straight from the Show” re<strong>view</strong>s of industry events<br />
<strong>Fastener</strong> <strong>Technology</strong> <strong>International</strong>...<br />
The most respected publication serving<br />
the fastener and precision formed parts<br />
industry...The publication where your<br />
cus<strong>to</strong>mers and prospects choose <strong>to</strong> get<br />
their information.<br />
www.fastenertech.com<br />
SALES CONTACTS<br />
USA, Canada and Mexico<br />
<strong>Fastener</strong> <strong>Technology</strong> <strong>International</strong><br />
1867 W. Market St.<br />
Akron, OH 44313 USA<br />
TEL: +1 330 864 2122<br />
FAX: +1 330 864 5298<br />
Tom Hutchinson, V.P. Sales: tlh@fastenertech.com<br />
Chip Lippincott, Associate Publisher: chip@fastenertech.com<br />
Germany/Austria<br />
IMP InterMediaPartners GmbH<br />
In der Fleute 46<br />
D-42389 Wuppertal, Germany<br />
TEL: +49 0 202 271690<br />
FAX: +49 0 202 2716920<br />
Sabine Schoett: galensa@intermediapartners.de<br />
Britta Steinberg: steinberg@intermediapartners.de<br />
Italy<br />
CASIRAGHI PUBBLICITA’ ESTERA<br />
Via Cardano 81<br />
I-22100 Como, Italy<br />
TEL: +39 031 261407<br />
FAX: +39 031 261380<br />
Cesare Casiraghi: info@casiraghi.info<br />
Japan<br />
Sakura <strong>International</strong><br />
P.O. Box 3, Nishinari<br />
Osaka 557-91 Japan<br />
TEL: +81 6 26659 2012<br />
FAX: +81 6 6659 2061<br />
Ken Myohdai: info@sakurain.co.jp<br />
Taiwan<br />
Worldwide Services Co., Ltd.<br />
11F2-C, No. 540, Sec. 1, Wen Hsin Rd.<br />
Taichung, 408 Taiwan R.O.C.<br />
TEL: +886 4 23251784<br />
FAX: +886 4 23252967<br />
Robert Yu: info@wwstaiwan.com<br />
China<br />
Brilliant Media Vision Inc.<br />
13/16F, Zhongshan Building, No. 93, Zhongshan East Road<br />
Haishu District, Ningbo City, China, 315100.<br />
TEL: +86 574-8739 2828<br />
FAX: +86 574-8727 7898<br />
Charles Jin: charles.jin@bmvmedia.com<br />
Kelly Yuan: kelly.yuan@bmvmedia.com
Change language