Safety Equipment for Construction - 5 Alarm Fire and Safety ...
Safety Equipment for Construction - 5 Alarm Fire and Safety ...
Safety Equipment for Construction - 5 Alarm Fire and Safety ...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
MSA Products <strong>for</strong> <strong>Construction</strong><br />
Accessories <strong>for</strong> Protective Caps <strong>and</strong> Hats<br />
Visors, Chinguards, Nitrometers<br />
MSA Visors<br />
Choose from a wide variety of visors that fit MSA<br />
faceshield frames. MSA visors are manufactured <strong>for</strong><br />
use ONLY on MSA frames <strong>and</strong> assemblies in order to<br />
comply with ANSI /ISEA Z87.1-2010.<br />
Visors should always be worn with eye protection, such<br />
as goggles or spectacles, that meet ANSI/ISEA Z87.1-<br />
2010 impact protector requirements. Visors should be<br />
inspected frequently <strong>and</strong> replaced immediately if worn,<br />
scratched, or damaged in any way. Selection of proper<br />
models <strong>for</strong> specific hazards <strong>and</strong> communication of all<br />
instructions, precautions, <strong>and</strong> limitations to the wearer<br />
is the responsibility of user safety specialists, who are<br />
also responsible to see that they are strictly observed.<br />
Failure to comply with any of the above could result in<br />
serious injury or death.<br />
Approvals<br />
Except as noted, MSA visors meet the general <strong>and</strong><br />
impact protector requirements of ANSI/ISEA Z87.1-2010.<br />
Visors that meet only the general protector requirements<br />
of ANSI/ISEA Z87.1-2010 should never be used where an<br />
impact protector is required. A hazard assessment should<br />
always be done be<strong>for</strong>e using protectors that meet only<br />
general protector requirements.<br />
Clean visor with mild soap <strong>and</strong> water only. Cleaning dry<br />
or with coarse cloth will scratch the visor.<br />
Do not use MSA visors <strong>for</strong> welding, elevated temperature<br />
applications, or <strong>for</strong> protection against other infrared<br />
radiation sources unless the MSA visor is approved <strong>for</strong><br />
such applications. Do not use <strong>for</strong> sports, simulated war<br />
games, paintball games, or similar activities. A pitted or<br />
scratched visor reduces eye protection <strong>and</strong> vision.<br />
Inspect routinely <strong>and</strong> replace worn or damaged parts<br />
immediately. Do not alter or modify this product. Do not<br />
use near open flame. Failure to follow these warnings can<br />
result in permanent impairment of sight, other serious<br />
personal injury, or death.<br />
14<br />
Polycarbonate Visors Size (inches) Part No.<br />
Clear (Molded) 9.5 x 19.5 x .07 10063106<br />
Clear (Formed) 7.88 x 15.76 x .04 488131<br />
Clear (Formed) 7.88 x 15.76 x .06 488132<br />
Clear (Flat) 7.75 x 15.5 x .04 10017934*<br />
Clear (Formed) 9.47 x 18.94 x .06 488138<br />
Clear (Formed) 5.75 x 15.76 x .06 491908<br />
Clear (Fog-free) 7.75 x 15.76 x .06 802337<br />
Propionate Visors (Molded) All propionate visors meet ANSI/ISEA<br />
Z87.1-2010 general protector requirements ONLY.<br />
Size (inches) Part No.<br />
Clear 8 x 15.5 x .06 10109107<br />
Dark Green 8 x 15.5 x .06 10109109<br />
Dark Green 9.5 x 19.5 x .06 10109113<br />
Shade 3 (Green) 8 x 15.5 x .06 10086996<br />
Shade 5 (Green) 8 x 15.5 x .06 10005882<br />
Nitrometer Visors <strong>and</strong> Chin Protectors<br />
Visors Size (inches) Part No.<br />
Clear polycarbonate (Formed) 5.75 x 15.76 x .04 488126<br />
Clear polycarbonate (Formed, Fog-free) 7.75 x 18.94 x .06 494916<br />
Shade 5 (Green) propionate – ANSI/ISEA Z87.1-2010 general protector<br />
requirements ONLY (Molded, must be worn with chin protector)<br />
6.5 x 15.5 x .06 10005881<br />
Chin Protectors (<strong>for</strong> use w/Nitrometer Visors)<br />
Part No.<br />
Clear polycarbonate 10022241<br />
Black polypropylene 10022242<br />
Black polycarbonate (use ONLY with P/N 10005881) 10013631<br />
Wire Screen Visors All wire screen visors meet ANSI/ISEA Z87.1-2010<br />
general protector requirements ONLY<br />
Size (inches) Part No.<br />
Plastic edge, 20 mesh (not <strong>for</strong> use in elevated temperatures) 6.35 x 15.72 476356<br />
Aluminum edge, 20 mesh (flat, not <strong>for</strong> use in areas where splash may occur) 7.96 x 17.44 457409<br />
Arc Shield Visor Assembly Arc shield visor assembly meets ANSI/ISEA<br />
Z87.1-2010 general protector requirements ONLY.<br />
Size (inches) Part No.<br />
For protection from electric arcing. Call <strong>for</strong> protection level. Meets ANSI/ISEA Z87.1 <strong>and</strong> NFPA 70E 2009, Classes 1 & 2.<br />
Tinted (light green/brown) complete with chin protector, 11 Cal –<br />
propionate (Molded)<br />
*Meets CSA Z94.3.<br />
** Size includes chin protector, as the visor must be worn with the chin protector.<br />
www.MSAnet.com • 1-800-MSA-2222<br />
7.25 x 20.5 x .07 ** 10063107<br />
Elevated-Temperature Visors Size (inches) Part No.<br />
Clear polycarbonate, with gold coating (Molded) 9.5 x 19.5 x .07 10005879<br />
Medium Green polycarbonate with gold coating (Molded) 9.5 x 19.5 x .07 10005880<br />
Questions or Comments?<br />
www.facebook.com/MSAThe<strong>Safety</strong>Company