CONTENT - Siso Denmark

CONTENT 

”MIC” SYSTEM........................................................................................................5 

RIM LOCKS................................................................................................6-11, 23 

SLAM LOCKS..................................................................................................12-13 

ROLL BLIND LOCKS............................................................................................14 

SHUTTER/SLIDING DOOR LOCK...................................................................15 

CAM LOCKS....................................................................................................16-19 

PUSH LOCKS..................................................................................................20-21 

WINDOW LOCKS..........................................................................................22-23 

LATCH LOCK.........................................................................................................24 

CENTRAL LOCKS...........................................................................................25-30 

FLAP LOCKS..........................................................................................................31 

1

CONTENT 

BOX LOCKS.....................................................................................................32-33 

MORTISE LOCKS...........................................................................................34-35 

FURNITURE KEYS..........................................................................................36-37 

ESCUTCHEONS..............................................................................................38-39 

ESPAGNOLETTE LOCKS..............................................................................40-46 

METAL FURNITURE LOCKS........................................................................47-51 

LOCK ACCESSORIES....................................................................................52-59 

CAM PLATES..................................................................................................60-66 

GLASS DOOR LOCKS..................................................................................67-86 

PROFILE BRASS CYLINDERS.....................................................................87-88 

KEYLESS COMBINATIONS LOCKS...........................................................89-91 

OTHER SPECIAL LOCKS..............................................................................92-96 

2

PRESENTATION 

Our locks are made of zinc diecast and are as standard supplied with 6 wafers, giving 400 

different key combinations and Masterkey System and Interchangeable Cylinders are also 

available. 

Some models are available with 7 wafers, granting 1000 key combinations. Keys are 

made of solid brass material. 

All locks are supplied as standard with 1 rosette and 2 double dented keys, marked with 

combination numbers. 

Keys are as standard supplied with black nylon cover, and can also be supplied as “hinged” 

type. However the keys may also be supplied all metal. 

Optional: Locks may be supplied with key combination number already prestamped on 

the cylinders. Locks with Masterkey System (MIC) are as standard supplied with key combination 

number already prestamped on the cylinders. 

You may ask for your own designed key and logo. Only you have to order minimum 

10,000 keys (= 5000 locks of different models). 

ABBREVIATIONS/SYMBOLS 

K/A = Key Alike (all locks with same key code) 

K/D = Key to Differ (all locks with different key code) 

NPL = Nickelplated 

BPL = Brassplated 

CPL = Chrome Plated 

ALU = Matt Chrome 

Backset = 

Distance from centre of key entrance to the edge of the lock, where the locking 

tongue protrudes. 

M = Master Key System. We offer 5 different Master Key groups named: J-11, J-12, 

J-13, J-14 or J-15. The groups J-11 and J-12 are stock items. Other groups 

require a certain delivery time. Masterkeys are covered with white nylon 

and marked with Masterkey Group number, f.inst. J-12. This materkey can open 

all 400 different key combinations within this group. 

3

MIC = Masterkeyed Interchangeale Cylinder. Apart from a few models, most of our locks 

may be supplied with MIC system. All locks marked with the symbol “MIC” are 

available with interchangeable cylinder. Keys for changing the cylinder is covered with red nylon. 

ADVANTAGE of MIC: 

1) Security: You can install the cylinders or change same to desired key combination at the final 

location. This offers additional security against unauthorized opening. 

2) Comfort: It is easy to change cylinders without having to dismantle or change the lock already 

installed. In case of lost keys you can open the furniture either with the masterkey or you can 

take out the cylinder with the red key and replace it by a new cylinder. Insertion of loose cylinder 

into the lock body without any additional accessories – just the red key. 

All MIC Locks are supplied masterkeyed as standard and cylinders are marked with key combination 

number. 

MIC locks are supplied with fixed cylinders or you can have empty lock bodies only and buy the cylinders 

separately, either as key alike or key to differ. If you buy lock bodies only, our locks are supplied with 

a nylon plug inside the cylinder housing. The plugs have different colours: 

Drawer position: blue colour 

Right position: black colour 

Left position: red colour 

The plug prevents the cylinder housing from being damaged and you just remove the plug and insert 

the cylinder in this lock position. 

4 

SISO A/S 

MILEPARKEN 11 

2740 SKOVLUNDE 

DENMARK 

Phone: (+45) 45 830 900 

Fax: (+45) 45 830 444 

e-mail: siso@siso.dk 

www.siso.dk

”MIC” SYSTEM 

INSTALLATION OF CYLINDER INTO EMPTY LOCK BODY 

Withdraw keys preinserted into the cylinder core because we are supplying all loose cylinder cores complete 

with preinserted keys. 

Insert into the cylinder the red interchangeable key and insert same into the empty lock body right to the end. 

Turn the key 90° and withdraw the red key and insert the normal key into the lock. 

The exchange of the cylinder core, insert the red interchangeable key, turn 90° and pull out the cylinder. 

5

RIM LOCK No. 850 ”MIC” 

Nickel plated 

Black anodized 

Bronze plated 

Aluminium finish 

Brass plated 

Application 

Drawers. wardrobes and 

cabinets 

Accessories for one set 

1 lock 

1 rosette 

2 keys marked with code 

number 

Function 

Turn key 180 O 

to lock and reverse to unlock 

Specifi cation 

Case and cylinder Zinc alloy 

Cylinder diam. 19 or 16,5 mm 

Cylinder lengths: 

18, 22, 26, 32 & 38 mm 

400 key combinations 

or key alike 

Packing 

12 pcs per box 

20 boxes per export carton 

Item No.: 14.00.000 

etc. 

LEFT HAND 

DRAWER 

RIGHT HAND 

20 

Screw 3 mm 

2,40 

3,50 

LOCKED 

11 

25 

1,8 

DRAWER 

UNLOCKED 

40 

32 

Ø16,5/Ø19 

20 

UNLOCKED 

UNLOCKED 

32 

40 

20 

22 7,5 

25 

7 

RIGHT 

LOCKED 

LEFT 

LOCKED 

18 

22 

26 

32 

38 

6

35 

40 

50 

RIM LOCK No. 850 - 35 mm BACKSET “MIC” 

Nickel plated 

Other finishes upon request 

Application 

Drawers, wardrobes and 

cabinets etc. where you want to drill 

hole further from the edge 


1 lock 

1 rosette 

2 keys 

Available 

Draw 

Right hand and left hand 

20 

9 

Screw 

3,5 mm 

3,50 

2 


lock body and core Zinc alloy 

rosette and keys steel 


22, 26, 32 or 38 

1,8 

Packing 



Ø19 

20 

Item No.: 

Right 14.01.096 

Left 14.01.095 

Draw 14.01.097 

20 

30 

40 

8 

25 

7 

LOCK WITH ADJUSTABLE BACKSET MODEL ”SERBIA” 

Nickel plated 


Application 

Drawers. wardrobes 

and cabinets etc. 

Accessories one set 

1 lock 

1 rosette 

2 metal keys 

Available 

Draw position 

Right and left 

Upon request 

Packing 


300 pcs per carton 

22 

Ø 6 

24 

11 

3 

23 

3 

NB! 

You can drill a hole 

for cylinder any place 

between 22 and 44 mm 

from cabinet edge 

44 

37 

12 

56 

40 

Ø 21,50 

Ø 28 

4,50 

Ø 22 

Item No.: 14.01.015 

40 

56 

9 

7

RIM LOCK No. 850-N - Millennium “MIC” 

Nickel plated 



Black nickel 

Gold plated 


1 lock 

1 rosette 

2 keys 

3 mounting screws 

Function 



Option 

Drawer 


MIC system & key alike 

47 

20 



Cylinder dia. 19 or 16,5 mm 


1,8 

Ø20 

Ø19 

43 

Packing 



Item No.: 14.01.050 

etc. 

Ø25 6 

22 9 

RIM LOCK No. 905, SLIM CASE “M” 

3,5 

Nickel plated 

Chrome plated 

Others upon request 

Application 

Drawers, wardrobes 

and cabinets 


1 lock 

1 rosette 

2 keys 

Function 

Turn key 180 O to lock or unlock 

Option 

Right hand or left hand and other 

fi nishes upon request 


Case: Steel nickel plated 

Cylinder: Diecast 


Packing 



Item No.: 14.02.050 

Ø17,5 

Ø19 

Ø21,5 

22 

2 

3 

6 

25 

9 

21 

16 

30 

40 

30 

40 

Screw 3,5 mm 

Ø 25,5 

4,4 

2 

8

Ø 19 

RIM LOCK No. 852, SLIM CASE “M” 

Nickel plated 




1 lock 

1 rosette 

2 keys 

Function 


Option 

Right hand or left hand upon 

request 


Case and cylinder: zinc alloy 

Cylinder diam. 19 or 16,5 mm 

Cylinder lengths: 22 mm 


22 

3 

2 

21 

15 

8,5 

2 

Packing 



Item No.: 14.01.000 

etc. 

39 

30 

6 43 

Ø 25 

Ø20 

7 

Screw 3 mm 

RIM LOCK WITH ADJUSTABLE BACKSET No. X-965 ”MIC” 

Nickel plated 

Application 


and cabinets 


1 lock 

1 rosette 

2 keys 

Function 

Turn key 180 O to lock/unlock 

Adjustable backset 

15, 20, 25, 30, 35, 40 mm 

To adj. backset, remove 

the cylinder from the housing 

with screwdriver and mount 

it in the required backset 

position 

Option 

Right hand 14.01.013 

Left hand 14.01.012 

Draw position 


Lock: zinc alloy 

Rosette + key: steel 

9

RIM LOCK No. 850, LONG LATCH “M” 

Nickel plated 


Application 

Drawers, wardrobe, cabinets 

where big gab is expected 

or locking double door with 

middle wall in between 


1 lock 

1 rosette 

2 keys 

Function 

Turn key 180 O latch come out half 

turn 360 O latch will extend twice 

Option 

Right hand and left handed 



rosette & key steel 

cylinder length 22 & 32 mm 


Packing 



Screw 

3 mm 

25 

9 

20 

20 

40 

32 

50 

18 41 

4 

8,70 

3 

22 or 32 mm 

Ø 19 

Ø25 

1,8 

7 

Ø20 

Item No.: 14.01.090 

RIM LOCK No. 853N “Millennium” “MIC” 

Chrome plated 


Application 


and cabinrts 


1 lock 

1 rosette 

4 screws 

2 keys 

Function 




Rosette & key: steel 


or key alike 

22 

1,8 

Packing 



15 

Ø40 

Ø19 

Ø20 

Item No.: 14.01.069 

etc. 

Ø25 

7 

3 

10

PUSH LOCK MINI - MODEL “CARAVAN” 



Material 

Plastic 

Ø 19 

Application 

Drawers, wardrobes, cabinets in 

caravans + vessels + airplanes 

Universial for right/left/draw 

application 


1 lock 

1 rosette 

1 mini push button 

5 

5,30 

19 

Function 

Close the door, push the knob 

inside and secure the latch so 

door will not open until knob is 

pushed out again 

15 

35 

FOR DOOR THICKNESS 16 MM 

Packing 


500 pcs per export carton 

1,60 

20 

24 

36 

47 

Item No.: 14.03.050 

RIM LOCK No. 954 “M” 

Nickel plated 

Drawer 

Right 

Left 

Application 


and cabinets 


1 lock 

1 rosette 

2 keys 

Function 



Case: steel nickel plated 

Cylinder: diecast 


Packing 



Item No.: 14.02.130 

Ø19 

20 

4 

8 

3 

25 

20,5 

15,70 

31 

41 

31 

Screw 3,5 mm 

41 

Ø25 

7 

2 

11

SLAM LOCK No. 856 “M” 

Nickel plated 


Application 

Minibars, tills, drawers, 

wardrobes and cabinets 


1 lock 

1 rosette 

1 striking plate 

2 keys marked with code 

number 

STRIKER PLATE 

25,4 screw 3,5 mm 

Function 

Spring loaded tongue allows 

doors and drawers to push lock 

automatically 

Option 





Ø 19 

22 

2 

7,30 

25 

Screw 3 mm 

20 

8 

32 42 

1,8 

7 

Ø20 

Packing 



Item No.: 14.01.481 

11 

32 

40 

Ø 25 

SLAM LOCK No. 856N “Millennium” “M” 

Nickel plated 


Application 

Hotel mini bars, tills, drawers, 



1 lock 

1 rosette 


2 keys 


Function 



automatically 

1,8 

7 

25 

20 

22 

5,9 

5 

11 

43 

3,8 

25 

Option 

Right hand or left handed upon 

request 


Lock body 

and cylinder: zinc alloy 

Key and rosette: steel 


Item No.: 14.01.482 

Screw 

3,5 mm 

25 

Packing 



12

SLAM LOCK No. 835 “MIC” 

Nickel plated 


12 

Application 

Hotel mini bars, tills, drawers, 



1 lock 

1 rosette 

2 keys 

6 

16 

Function 



automatically 

Option 

Right hand or left hand 

L- striking plate 

Ø 34,50 

4,5 

1,35 


Lock body 

and cylinder: zinc alloy 

Key and rosette: steel 


33 

Ø 16,50 

Packing 



New model 

26 

Screw 3,5 mm 

8,2 

22 

SLAM LOCK WITH KNOB No. 856 “M” 

Chrome plated 

Nickel plated 


Application 

Marine, caravan, furniture 

and interior 

STRIKER PLATE 


1 lock 

1 rosette 


25,4 screw 3,5 mm 

Function 



automatically 

Option 




2 

20,00 

7,30 

Screw 

3 mm 

25 

20 

32 

42 

1,8 

7 

Ø20 

Packing 



Item No.: 14.01.486 

35 11 

32 

40 

Ø 25 

13

ROLL BLIND LOCK No. 855 “M” 

Nickel plated 

Brass plated 


Application 

Roller shutter doors vertical 

or horizontal 

Slidingdoors 

Lock shown with 

raised striker 

Packing 




1 lock 

1 rosette 

1 flat striking plate 

2 keys 

Optional 

Raised striking plate for more 

securIty 

Function 

To open turn key 30 O 

Spring loaded hooks allow 

automatic push locking 

Option 

Vertical key position 

as illustrated, or horizontal 

position upon request 



Cylinder dia. 19 or 16,5 mm 

Cylinder lengths: 22 or 32 mm 


or key alike 

Item No.: 14.01.450 

etc. 

Ø25 

15 

1,8 

7 

22 

38 

50 

21 

5 

Screw 

3 mm 

3,60 

2 

22 7,50 

25 

13 

1 

13 

7 

20 

63 

50 

22 

32 

Screw 3,5 mm 

40 

31 

13,75 

Ø 3 

31 

40 

ROLL BLIND LOCK No. 2159 “M” 

Black lock body 

Cylinder Nickel plated 

Application 

Roller shutter doors vertical 

or horizontial 

Sliding doors 


1 lock 

1 rosette 


2 keys 

Function 

To open turn key 30 O 

Spring loaded hooks allow 

automatic push locking 


Case: black plastic 

Cylinder: zinc alloy 


Packing 



Item No.: 14.01.470 

etc. 

14 

Ø 16,50 

21 

2 

6 

11,25 

20 

30 

27 

37 

33 

Screw 

3 mm 

22 

12 

Screw 

3 mm 

45 54 

Ø23 

1,8 

6 

Ø17

LOCK FOR ROLLER SHUTTER/SLIDING DOORS ”MIC” 

Black nylon/diecast 

Application 

Roller shutter doors, 

sliding doors 


1 lock 


1 rosette 

2 keys 

Function 

Turn key 180° and 2 hooks will 

move out from the lock body 

anchoring into the enclosed 

striker 


Lock body: nylon 

Metal parts: zinc alloy 

Cylinder diam. 16,5 or 18 mm 

Cylinder lenghts 22, 26 or 32 mm 


or key alike 

Available in horizontal 

and vertical position 

New model 

7,5 

65 

Ø16,5 

Ø18 

17 

4 

22 

26 

32 

13 

24 

2 - Ø4 

81 

17 

32 

32 

15

CAM LOCK No. 5250 “M” 

Nickel plated 



Application 

Drawers, wardrobe, cabinets, 

universal for many diff. 

purposes 

ONE WING TYPE mainly applied 

for shutter doors 


1 lock 

1 rosette 

2 keys 

Function 

Turn key 180 0 to lock or unlock 

Option 

19 mm cylinder diam and many 

other different cam types 

available upon request 

Other rotation angle 


Lock zinc alloy 

Key & rosette & cam steel 


Packing 



Item No.: 14.04.605 

etc. 

16,50 

35 

15 

32 

42 

Ø 3 mm 

PUSH AND TURN LOCK No. 919 “M” 

2 

20 

16,5 

15,5 

30 

Nickel plated 


Application 

Heavy duty sliding doors 

Flap doors 


1 lock 

1 rosette 


2 keys 

Function 

To lock push cylinder and turn 

key to allow cam enter back 

door 

Key removable in locked and 

unlocked position 



Cylinder diam. 19 mm 

Cylinder lenght 24 mm 

400 different key combinations 

Packing 



Item No.: 14.03.004 

etc. 

Ø 16,5 

7 

2 

18 

Ø 19 

24 

Ø 25 

4 

3, 8 or 15 

16 

2,5 Ø 35 

30 

Screw 

3 mm 

9 

Screw 

3 mm 

16 

16


Chrome plated 

Option 

Other cam style/sizes 


Conical face 


1 lock 

1 hex nut or snap clip 

2 keys 

1 cam No. 7 spun on to lock 

body 

15 

11 2 

11 2 

Function 

Turn key 180 0 

12 oćlock to 

18 oćlock to lock and unlock 

Ø18,80 

Ø18,80 



Key & cam steel 


or key alike 

Packing 



Item No.: 14.04.507 

etc. 

Ø 22 

Fixing hole 

for metal for wood, plastic 

R 9,5 and glass 

19 

Ø19 

16,5 

Chrome plated 

others upon request 

Option 

Other cam style/sizes 


CAM LOCK No. 1216 


1 lock 

1 hex nut or 1 snap on clip 

2 keys 

1 cam 

1 transparent plastic washer 

Function 

Turn key 90 0 

Key removeable in locked 

position only 

12 oćlock to 

15 oćlock to lock and reverse 

unlock 



Key & cam: steel 


or key alike 

Packing 



Item No.: 14.04.480 

etc. 

9,5 

Ø 15 

NB: 

25,50 

Ø 11 

16 2 

for metal 

10,60 

Fixing hole 

R 6 

We also stock this lock key alike without 

key and keys separatly because clients 

buy f.inst. 1000 locks but 100 keys only 

12 

for wood, plastic 

and glass 

Ø12 

17


CONICAL FACE 

Chrome plated 

DOME FACE 

Stainless steel 


1 lock 

2 keys 

1 hex nut or 1 snap on clip 

1 cam 

1 transparent plastic washer 

Function 

Turn key 90 0 or 180 0 to lock 

or unlock 

4 

16 

2 

15 

Option 

Other cam style/size 

Key removable in locked 

position only 

Transparent plastic washer 

Conical face 

Zinc alloy 

23,5 

19 


Lock zinc alloy or with stainless 

steel face (DOME FACE) 



5 

16 

2 

15 

Packing 



Item No.: 14.04.475 

etc. 

Dome face 


24 

19 

Ø 30 

1 

4 

Exploded view 

for metal 

Fixing hole 

R 10 

for wood, 

glass, plastic 

19,5 

Assembled view 

16,2 

Ø 19,5 

18

CAM LOCK No. 1920 + 1925 +1930 “MIC” 

CONICAL FACE 

Chrome plated 

DOME FACE 



1 lock 

2 keys 

1 hex nut or snap clip 

1 pronged washer 

1 cam 

Function 

Turn key 90º or 180º to lock 

or unlock 

Conical face 

Zamak, cpl 

4 

20, 25 or 30 

2 

19 

15 

Option 



position only on locks with 90º 

rotating only 

5 

20, 25 or 30 

2 

Ø 24 

15 


Lock zinc alloy or with stainless 

steel face (DOME FACE) 



Packing 



Item No.: 14.04.485 

etc. 

Dome face 


19 

Ø 24 

for metal 

Fixing hole 

R 9,5 

for wood, plastic 

and glass 

Exploded view 

19,5 

Ø 19,5 

Assembled view 

16,5 

19

PUSH LOCK No. 1003 “MIC” 

Nickel plated 

Brass plated 


Application 

Sliding doors 


1 lock 

1 rosette 

2 keys 

Special model available with 

security action i.e. lock can 

not be pushed/closed without 

inserting and turning the key 

Function 

To open: turn key 

To close: push cylinder 

Special model available with 

security action i.e. lock can not 

be pushed/closed without 

inserting and turning the key 



Cylinder dia. 19 mm 



or key alike 

24 11 

11 

M4 

Ø 19 

Ø 7 

M4 

2 

19 

9,50 

24,5 

34,5 

49 

Screw 

4 mm 

Striker A-1030 

Option 

Striker A-1002 or 1030 

Pin Extension A-1009 

5, 10 or 20 mm 

upon request 

Packing 



20 

Ø 7 

10 

5 

6 

Pin Extension 

A-1009 

1 


5 

47,70 

Ø 8 

31,70 

Ø 3 

18,5 

Ø 13 

9,5 

Ø 9 

Item No.: 14.03.030 

etc. 

PUSH LOCK No. 1004 “M” 

Chrome plated 

Application 

Sliding doors 


1 lock 

1 rosette 

2 keys 

Ø 21,5 

Function 

To open turn key 

Push cylinder to lock 

26 11 



Body and core Zinc alloy 

Cylinder dia. 22 mm 



Option 

Striker A-1030 or 1001 

Packing 



21,5 

9,50 

11 

Ø8 

35 

50 

M4 

Ø 16,5 

Screw 4 mm 

2 

1 

47,70 

Ø 9 

31,70 

2 

Ø23 

7 

Ø 22 Ø 30 

New model 

5 

Ø 3 

19,80 

20

PUSH LOCK MODEL ”BUDAPEST” 

Nickel plated 

Application 

Sliding doors, post boxes and 

other all round application 


1 lock 

2 keys 

Function 

To open – turn key 



Zinc alloy 


or key alike 

17 9 

Ø 9 

M20 

for metal 

Fixing hole 

R 10,50 

21 

for wood, 

glass, plastic 

Packing 



Item No.: 14.03.006 

Ø 26 

24 

18,50 

Ø 21 

PUSH AND TURN LOCK MODEL ”ITALY” 

Nickel plated 

Cylinder body: black plastic 

Application 

Sliding doors, drawers, 

cabinets 


1 lock 

2 keys 

1 clip 

Function 

To lock push cylinder 

and turn key to allow 

Cam enter back of the door 

or into a slot 


Body: plastic 

Cylinder: zinc alloy 


or key alike 

23 

31 

Packing 



32 

28 

New model 

19,50 

21 

21

TURN TO LOCK No. 112 “M” 

Chrome plated 

Application 

Window handles 

and other special purposes 


1 lock 

2 keys 

Function 

Turn key 180 0 

the pin will extend 7 mm 

from lock body 

FIXING HOLE SIZE 

Ø 15 

Ø 5,0 

13,5 

4 

30 

26 

Ø15,2 



Key steel 


New model 

1 

4 

6 

2 

BARREL MOVEMENT 

11,5 POSITION 1 

14,0 POSITION 2 

PUSH-IN LOCK No. 111 ”M” 

Chrome plated 


Application 

Window handles 


1 lock 

2 keys 

Function 

To lock: push cylinder 




Keys steel 


18 

5 

118 

New model 

9,5 

30 

20 

7 

14,9 

48° 

15,2 

min 

7 

43 

22

PUSH LOCK WINDOW No. 280 ”M” 

Chrome plated 

White Finish 


Application 

Window 


1 lock body 

1 locking sleeve 

2 keys 

Function 



Option 

Special string plate 

Mounting screws 



Keys and sleeve steel 


Packing 



4,4 

21,9 

13,5 

25 

44,3 

14 33,9 

25 

47,9 

9,5 

10,6 

16,6 

4,6 

14 

42 

21,4 17,8 

19 

21 

16 

2 4,2 

6,3 16,2 

29,3 

11 

7,6 7,5 

Item No.: 14.03.001 

etc. 

Nickel plated 


RIM LOCK No. 281 WITH KNOB “M” 

23 

17 

Screw 

3,5 mm 

Application 

Bank box rooms and where you 

want privacy from inside 

12 

25 


1 lock 

1 front plate 



2 keys 

30 

58 

70 

Function 

Turn 90 O to lock/unlock. 

By pulling a bolt downwards 

you block key operation. 

From inside you can lock 

by turning a knob 

Universal right hand 

and left hand 


34 

5 14 

Packing 

8 pcs per box 


Item No.: 14.01.230 

4,20 

44 

Ø 19 

23

LATCH LOCK No. 300 

Cam lock lockable 

with padlock 

Chrome plated 


Accessories 

1 lock 

2 keys 

1 cam 

1 hexnut or snap clip 

1 security plate 

Function 

Turn key 90° to lock 

and place a padlock inside 

the handle with shackle diam. 

Min. 5 mm 

Max. 7 mm 

Option 


Cylinder lengths 

Either 16, 20, 25 or 32 mm 



Cam or clip: steel 

Packing 



Item No.: 14.04.585 

etc. 

NB: 

The cylinder can be supplied 

with 2 swell on top and bottom 

behind the cylinder face 

to match the special fixing hole 

for application in metal cabinets 

to serve as extra security 

40 

Standard 

fixing hole - metal 

Special 

fixing hole - metal 

5 

Fixing hole - wood 

19,1 

MIN 

21,1 

MIN 

19,5 

46 

16,6 MIN 

16,6 MIN 

19,1 MIN 

26 

screw 

3 

Locked 

2 

L=16, 20, 25 or 32 

5 

2 40 

16,6 

19,1 

Security plate 

7,5 

24

CENTRAL LOCK No. 851N - SIDE MOUNTED ”MIC” 

Nickel plated 

Other finish upon request 

Application 

Side mounted central lock 

on left or right side 

of the pedestal 


1 lock with premounted 

aluminium locking bar 

500, 600, 800 or 1200 mm 

Other lengths upon request 

1 rosette 

2 bar guides 

3 adj. pegs 13 mm 

2 keys 


Option 

Adjustable pegs 

5, 6, 8, 11 or 19 mm 

available from stock 

Function 

Turn key 180º locking bar 

moves down 9 mm to lock 

any numbers of drawers 


Lock + pegs zinc alloy 

Locking bar aluminium 

Rosette + keys + screws 

+ bar guides = steel 


Packing 


120 pcs per catron 

Item No.: 14.01.319 

etc. 

8 

20 

28 

6,5 

22 

40 

40 

17 

19 

38 

29,5 

3 

4 

4 

20 

12 

4 

17,5 

1 

6 

L 

19,5 

L 

3,3 

16,3 

6 

L = 5, 6, 8, 11, 13 or 19 

15 

18,5 

16 

9 

L = 500, 600, 800 or 1200 mm 

3 

25

CENTRAL LOCK No. 1101 

Nickel plated 

Application 

Central lock mounted into side 

of the pedestal either right 

or left side suitable only where 

drawer front goes inside 

the cabinet 


1 lock body 

2 locking bar 500 mm 

other lenght upon request 

3 adj. pegs 13 mm - standard 

2 bar guides 

2 keys 

Option 

Adj. pegs 5, 6, 8, 11, 19 mm 

Function 

Push cylinder and locking bar 

move up 9 mm to block or lock 

the drawers 

To open: turn key and locking 

bar move down to open drawers 


Lock body + pegs - zinc alloy 

Cylinder - brass 

Locking bar - aluminium 

Key + bar guides - steel 


Item No.: 14.01.036 

26

CENTRAL LOCK No. 1018 - FRONT MOUNTED ”MIC” 

Nickel plated 





1 lock body 

1 rosette 

1 locking bar 500, 600, 700, 800 

2 bar guides metal 

3 adj. pegs 13 mm 

2 keys 

Option 

Adj. pegs 5, 6, 8, 11, or 19 mm 

Available on stock other 

Lengths of locking bars 

On stock 1200 and 1300 mm 

Function 

Turn key 180° the locking bar 

move up to block/lock 

any numbers of drawers 


Lock + pegs: zinc alloy 

Locking bar: aluminium 

Rosette + key: steel 


30 

40 

30 

20 

2 

19 

19 

31 

42 

31,7 

19,5 

3,3 

16,3 

6 

19 

L 

Packing 



Item No.: 14.03.104 

etc. 

40 

30 

20 

2 

16,5 

42 

31,7 

19,5 

19 

L = 5, 6, 8, 11,13 

or 19 mm 

40 

20 

2 

16,8 

9,5 

32 

6 

3,3 

42 

31 

13 

38 

29,5 

3 

L 

14,5 

20 

20 

3,5 

16,8 

1,5 

7 

4 

17,5 

1 

6 

20 

19,5 

16 3 

51 

30 

R10 

L = 500, 600, 700, 800, 1200 or 1300 mm 

10 

R 

20 

CLOSED 

20 25 

24 

6 

5 

9 

10 

40 

LEFT 

26 

12 

8 

TO CLOSE 

40 

RIGHT 

26 

8 

12 

27

CENTRAL LOCK No. 1018 - ANTITILT SOLUTION 

Central lock No. 1018 as described and illustrated on separate page for this lock, but here on this page illustrated as 

a simple antitilt solution mainly applied on PEDESTALS. Illustrated below are special locking bar needed for this system 

and different accessories. Please advise all sizes: L, A, B, C to customize bars for you. 

9 

35 

ANTITILT BLOCKS Item No.: 14.03.270 etc. 

15,5 23 

9 

14,5 

66 

37,8 

24,5 

12 

8 

30,2 

24 

5,5 

24 

22 

3 

5 

66 

5 6 

4 

13 

12 

1,8 

13,4 

66 

10 

10 

39,7 

4 

8,5 

5,4 

16,5 

3 

10 

3,2 

3,2 

12 

7 

3,3 

42 

31 

8 

BAR GUIDES Item No.: 14.03.285 etc. 

3,3 

42 

31 

14 

42 

32 

20 

20 

20 

3,5 

16,8 

1,5 

7 

3,5 

16,8 

1,5 

7 

8 

3,4 

8,5 

2 

7,2 

3,3 

16,3 

20 

ADJUSTABLE PEGS 

Item No.: 14.04.330 etc. 

6 

L 

3,3 

8 

16,3 

6 L 

32 

20 

32 

20 

42 

30 

8 

5,4 

20 

2 

5,4 

CATCH GUIDES 

Item No.: 14.03.280 etc. 

16,3 

3,2 

19 

31 

42 

1,5 

2 

19 

6,5 

3,4 

7,2 

16,3 

30 12 

42 

19 

6 

CUSTOM MADE LOCKING BARS 

23 

20 

28 

A 

A 

17 

A 

7 

C 

L 

13 

B 

13 

15 

3 

13 

28

CENTRAL LOCK No. 4103 ”M” 

Nickel plated 

Application 

Central lock mounted 

into side of the pedestal 

either right or left side 

suitable only where drawer 

front goes inside the cabinet 

Accessories 

1 lock body 

1 mounting clip 

1 locking bar 500 or 700 mm 

others lengths upon request 

3 adj. pegs 13 mm standard 

2 bar guides 

2 keys 

Options 

Adjustable pegs 5, 6, 8, 11 

or 19 mm available on stock 

Function 

Turn key 180° and locking 

bar moves up to lock/block 

any amount of drawers 

3 

15 

1,5 16 

13 

8,5 

17 

24 



Clip + key + bar guides steel 



35 4 

Packing 


12 

38 

29,5 

Item No.: 14.04.025 

etc. 

20 

3 

4 

17,5 

1 

6 

19,5 

19 

5 

10,5 

10 

8 

20 34 

15 

R18 

5 

L 

9,5 

38 

3,3 

L 

15 

13 

13 

16,3 

6 

19 

19 

L = 5, 6, 8, 11, 13 or 19 mm 

16 3 

L = 500 or 700 mm 

29

CENTRAL LOCK No. 4105 ”M” 

Nickel plated 

Application 

Central lock mounted 

into side of the pedestal 

either right or left side 

suitable only where drawer 

front goes inside the cabinet 

Accessories 

1 lock body 

1 mounting clip 

1 locking bar 500, 800 

or 1200 mm 

Others lengths upon request 

3 adj. pegs 13 mm standard 

2 bar guides 

2 keys 

Options 

Adjustable pegs 5, 6, 8, 11 

or 19 mm available on stock 

Function 

Turn key 180° and locking 

bar moves up to lock/block 

any amount of drawers 

414 

1,5 16 

14 

35 4 

8,5 

17 



Clip + key + bar guides steel 



Packing 


20 

12 

38 

29,5 

3 

New model 

4 

17,5 

1 

6 

19,5 

L 

10,5 

10 

3,3 

20 34 

8 

16,3 

6 

5 

9,5 

19 

L 

19 

38 

L = 5, 6, 8, 11, 13 or 19 mm 

15 

14 

13 

16 3 

L = 500, 800 or 1200 mm 

30

FLAP LOCK No. 9411, PLASTIC HOUSE 

White 

Brown 

Black 

- nickel plated 

- brass bronce 

or nickel plated 

- nickel plated 

Application 

Flap doors 

Accessories 

1 lock 

1 rosette 


2 metal keys 

Function 


and turn key 



position only 


Lock case: plastic 

cylinder, cam, rosette 

And keys: metal 

Key alike only 

Packing 



Item No.: 14.07.110 

etc 

10 

2,5 

2,5 

21 

Ø15 

Ø18 

4 5 

2,5 1 8 

Ø19 

Ø3,5 

20 

Ø25 5,5 30 

15 

Ø35 

1 

FLAP LOCK No. 9411, ALL METAL ”M” 

Nickel plated 

Brass plated 

Bronce plated 

Application 

Flap doors 

Accessories 

1 lock 

1 rosette 


2 metal keys 

Function 


and turn key 



and unlocked position 


Zinc alloy 


Rosette + key + striker steel 

10 

2,5 

8 + 15 mm optional 

2,5 

21 

16 

19 

3,5 

Ø35 

Packing 



Item No.: 14.07.104 

4 5 

2,5 1 8 

Ø20 

20 

Ø25 5,5 30 

Ø15 

1 

31

53 

51/64 

53 

56 

53 

41 

45,5/53 

41 

41 

43 

BOX LOCKS 

CUPBOARD LOCK ”AFRIC” 

Yellow zinc plated, double 

handed 

2 lever = 10 differs 

Each lock supplied with 

2 neutral zamak keys 

For vertical + horizontal use 

Packing 



7 26/33 

Ø 3 

15/25 

16 

13/16,5 13/16,5 

2 

1 

8 

37/40 

Item No.: 14.07.145 etc. 

BOX LOCK No. 2110 - 15 mm 

backset 

Universal for right/left or draw 

application 

Finish 

Nickel, brass or bronce plated 

Locking system 

For eurobit key - 1 lever key 

no differs 

Packing 



7 32,5 

Ø 3 

21 

15 

21 

3,5 

9 

6 

Bit size 

8 

Item No.: 14.06.212 etc. 


backset 


application 

Finish 




no differs 

Packing 



7 37 

Ø 3 

21 

20 

23 

3,5 

9 

6 

Bit size 

8 

Item No.: 14.06.214 etc. 


backset 


application 

Finish 




no differs 

Packing 



7 42 

Ø 3 

21 

25 

31 

3,5 

9 

6 

Bit size 

8 

Item No.: 14.06.235 etc. 


backset 


application 

Finish 




no differs 

Packing 



7 48 

Ø 3 

21 

30 

34 

3,5 

9 

6 

Bit size 

8 

Item No.: 14.06.245 etc. 

32 

Other backsets are available upon request

63 

63 

49 

49 

70 

70 

BOX LOCKS SUPPLIED 

IN SETS WITH KEY AND ESCUTCHEON 

BOX LOCK WITH BACKSET - 15 MM 

Item No.: 14.06.310 


backset 

Ø 3,5 

Finish 

Nickel plated 

15 

3 

Supplied with 1 key 

and 1 escutcheon 

21 

Universal right, left or draw 

application 

7 

9 

Packing 


30 

BOX LOCK WITH BACKSET - 25 MM 

Item No.: 14.06.320 


backset 

Ø 3,5 

Finish 

Nickel plated 

25 

3 

Supplied with 1 key 

and 1 escutcheon 

7 

21 

Universal right, left or draw 

application 

9 

Packing 


40 

Box lock supplied in sets with key and escutcheon 

33

MORTISE LOCKS 

MORTISE LOCK - 15 mm 

backset 

Universal left, right and draw 

application 

Brass rounded front plate 

Lock steel plain 



no differs 

Packing 




backset 

Packing 




backset 

Packing 



9 


backset 

Packing 



Item No.: 14.06.028 

etc. 

11 13 

1 

Eurobit size 

22 

15/20/25/30 

50 

67 

80 

6 

8 

3,5 Ø 6 

33/38/43/48 

34

MORTISE CHEST LOCKS 

MORTISE CHEST LOCK 

- 20 mm backset 

Function 

Right hand and draw position 

Front plate + striking plate 

brass rounded 

Lock body steel plain 



no differs 

Packing 



Item No.: 14.06.064 

9 

11 

13 

1 

Eurobit size 

Ø6 

20 

36 

55 

68 

6 

8 

3,5 Ø 6 

38 

35

FURNITURE KEYS 

MODERN TRADITIONAL DESIGN 

MODEL 7771 - effective shaft lenghts 40 mm 

Zinc alloy nickel, brass or bronce plated 

ALL KEYS SUPPLIED WITH EUROBIT... 

for 1 lever locks only 

6 

8 


Zinc alloy nickel plated 

Item No.: 

14.10.055 etc. 

Item No.: 

14.10.200.0 



MODEL ”MMI” - with beech or maple wooden head, 

effective shaft lenghts 35 mm 

Zinc alloy matt nickel plated 

Item No.: 

14.10.050 etc. 

Item No.: 

14.10.060 etc. 




Zinc alloy matt nickel 

Other fi nish upon request 

Item No.: 

14.10.240 etc. 

New model 

MODEL K-1026 - effective shaft lenghts 42 mm 




New model 

New model 

36

FURNITURE KEYS 

DECORATIVE - CLASSIC - ANTIQUE DESIGN 

MODEL ”LYRE” - effective shaft lenghts 45 mm 

Zinc alloy brass or bronce plated 

ALL KEYS SUPPLIED WITH EUROBIT... 

for 1 lever locks only 

6 

Item No.: 

14.10.170 etc. 

8 



Other effective shaft lenght and fi nish upon request 

MODEL ”REGENCY” - effective shaft lenghts 40 mm 

Zinc alloy brass plated. Other fi nish upon request 

Item No.: 

14.10.175 etc. 

Item No.: 

14.10.220 

MODEL ”ROCOCO” - effective shaft lenghts 40 mm 


MODEL ”DOMINUTIVE” - effective shaft lenghts 35 mm 

Zinc alloy bronce plated. Other fi nish upon request 

Item No.: 

14.10.046 

New model 

37

ESCUTCHEONS - MODERN - CLASSIC - ANTIQUE 

PLASTIC ROUND Nickel Plated Matt 

Front Ø 25 mm - knock in 20 mm Ø x 14 mm 

Item No.: 14.11.240 

14 

ZAMAK ROUND Nickel Plated Matt 

Front Ø 25 mm - knock in 18 mm Ø x 14 mm 

Item No.: 14.11.041 

Ø20 

Ø25 

11 

Ø18 

Ø25 

PLASTIC RECTANGULAR Nickel Plated Matt 

Front 20 x 28 mm - knock in 20 mm Ø x 5 mm 

Item No.: 14.11.061 

5 20 

Ø18 28 

ZAMAK RECTANGULAR Nickel Plated Polished 


Item No.: 14.11.056 etc. 

6 20 

Ø18 28 

ZAMAK OVAL Nail On Type Bronce or Brass Plated 

Front 20 x 48 mm 

Item No.: 14.11.150 etc. 

20 

2 

ZAMAK ANTIQUE Nail On Type Bronce or Brass Plated 


Item No.: 14.11.170 etc. 

25 

3 

39 

48 

Ø2 

30 

45 

ZAMAK ANTIQUE Bronce or Brass Plated 


Item No.: 14.11.180 etc. 

25 

8 

Ø2 

ZAMAK OVAL Nickel or Brass Plated 


New model 

22 

6 

38 Ø18 

25 

Ø18 

38

ESCUTCHEONS 

Other models available upon request 

MODEL No. 7882 


23 

2 



20 

3 

37 

50 

29 

40 

Ø2 

Ø2 



20 

4 



20 

3,5 

43 

52 

28 

38 

Ø2 

Ø2 


Front Ø 30 mm 

19 

5 



25 

2,5 

Ø30 

Ø2 

28 

35 

Ø2 

39

ESPAGNOLETTE LOCK No. 922 AND S-922 ”MIC” 

Zinc alloy 

Nickel plated, Aluminium finish 

(matt chrom), Black zinc 

Steel Plastic covered housing 

Burgundy, Black 

22 

Application 

Wardrobes, lockers, cabinets 

and others 


1 lock right or left handed 16,5 

or 19 mm cyl. diam 

1 rosette 

2 keys 

2 hooks and holders top 

and bottom 

2 bar guides 

2 stoppers either eccentric 

or triangular 

Locking bars to be ordered 

separately available lenght 

ex stock 1000, 1200, 1500 

and 2000 mm 

Finish nickel, brass or bronce 

plated. 

Function 

Turn key and locking bars will 

rotate. Hooks will move behind 

the stops. Cam extend from 

the lock case and door will be 

locked at 3 points 

30 

8 

16,5 

74 25 

64 

15 

or 19 

13,5 

20 



or key alike 

Optional 

Other finishes 

25 mm backset 

Packing 



Item No.: 14.05.268 

etc. 

LOCK No. S-922 ”MIC” 

Item No.: 14.05.284 

etc. 

28 

13,5 

8 

20 

55 22 

64 

16,5 

19 

15 

40

ESPAGNOLETTE LOCK No. 922 ”MIC” 

WITH KNOCK IN SOCKETS 

Zinc alloy 

Nickel plated, Aluminium finish 

(matt chrom), Black zinc 

Steel Plastic covered housing 

Burgundy, Black 

22 

Application 

Wardrobes, lockers, cabinets 

and others 


1 lock right or left handed 16,5 

or 19 mm cyl. diam 

1 rosette 

2 keys 

2 hooks and holders top 

and bottom 

2 bar guides 

2 stoppers either eccentric 

or triangular 

Locking bars to be ordered 

separately available lenght 

ex stock 1000, 1200, 1500 

and 2000 mm 

Finish nickel, brass or bronce 

plated. 

30 

8 

16,5 

74 25 

64 

15 

or 19 

13,5 

20 

Function 



the stops. Cam extend from 

the lock case and door will be 

locked at 3 points 



or key alike 

Optional 


25 mm backset 

Packing 



Item No.: 14.05.281 

etc. 

A-1036 

STRIKING PLATE 

3 

21,5 

6,5 

24,5 

3 

L = 1000, 1200, 1500, 2000 mm 

41

ESPAGNOLETTE LOCK MODEL No. 924 WITH KEY ”MIC” 

ESPAGNOLETTE LOCK No. 925 WITH KNOB 

Zinc alloy 

Nickel plated, aluminium finish, 

brass plated, nickel satin, 

nickel brushed, black plastic 

coated 


22 

Application 

Wardrobes, lockers 

and cabinets 


1 lock body right hand 

1 knob + pin 

2 hooks and holders top/bottom 

2 bar guides 

2 eccentric stops 

Function 

Turn the knob to lock/unlock 

in 3 points 

74 

25,5 

8 

30 

16,5 

16 

Lock No. 924 


Lock designed for 19/20 mm 

panel thickness. 

For other thicknesses please 

ask for 


or key alike 

Locking bars please order 

separately. We have on stock 

lengths 1000, 1200, 1500 

and 2000 mm in finish nickel, 

brass or bronce plated. 

Other lengths and finishes 

upon request 

15 

2 

Packing 



Item No.: 14.05.233 

etc. 

Lock No. 925 

Item No.: 14.05.240 

KNOB MOUNTING INSTRUCTION FOR LOCK No. 924 ”MIC” AND No. 925 

Set the lock in locked position by turning inside the square with a screw driver etc. Insert the door knob into the lockbody taking 

care that the square end stays upwards. Insert the pin and press the spring loaded pin inside the square. While doing so press the 

knob forward into the square. As the door knob move forward, remove the pin and continue pushing till the door knob clicks into the 

square (when the spring loaded pin in the square anchor into the knob axis). 

SQUARE END 

MOUNTING PIN 

KNOB 

WITH KEYHOLE 

OR WITHOUT 

29 

19-20 

3 

7 

16,5 

31 

7 

1,5 

42

ROTARY BAR LOCK No. 926 WITH SQUARE PIN 

Zinc alloy 

Nickel plated 

Application 

Wardrobes, lockers, cabinets, 

drawers 

22 


1 lock right hand 15 mm 

backset 

1 square pin 7 x 7 x 50 mm 

with harpoon nose 

with attaching screw 

2 hooks top/bottom 

2 bar guides 


29 

15 

Optional 

Left hand side 

25 mm backset 


Other lengths of square pin 

Knobs with premounted square 

pin (advice lengths L) 

54 

22 

8 

15 

7 

64 

Function 

Turn the knob and locking bars 

will rotate and fasten the hooks 

behind the stops to lock and 

unlock. 

The cam extens from the lockcase 

and the door will lock 

in 3 points 

Packing 



Item No.: 14.05.231 

M4 

L square pin 

L= 1000, 1200, 1500, 2000 mm 

12,5 

43

ESPAGNOLETTE LOCK No. 155 WITH ROTATING BARS 

Nickel plated 

Brass plated 

Bronce plated 

Plastic/metal version brown 

8 

Application 

Wardrobes/cabinets 

21,6 

5 


1 lock case 


2 bar guides 


keys, locking bars to be ordered 

separately 

Function 


rotate to make hooks fastened 

behind the stops cam extend 

from the lock case and locking 

at 3 points of the door 

Universal right/left hand 

of the door 

Optional 

Stoppers on triangular 

plate A-1036 

7,5 

19 

16 

32 

4 

55 

13,8 

3,2 

A =X-26 

20 20 

A=Y-2 6 

7 

Y 

X 

H 

INNER HEIGHTOF THE CABINET 

Packing 



Item No.: 14.05.310 

etc. 

1,8 

14,5 

7,5 

Bit size 

12,5 

3,5 

6 

8 

7,5 

3 

4,5 

32 

13,8 

6,5 

7 

18 

7,5 

32 

14 

3,2 

75,5 

19 

55 

32 

7 

10,5 

16 

3,5 

16 

26 

26 

18 

18 

26 

3 

7,5 

A-1036 

17,5 

L=1000 

14,5 

14,5 

26 

6,1 

3,5 

3,5 

6,1 

26 

12 

3 

21,5 

3,5 

6 

26 

22 

10,5 

13 

13 

10,5 

22 

26 

26 

4,8 

4 

4 

4,6 

3,7 

44

ESPAGNOLETTE LOCK No. 920 KEYHOLE TYPE 

Zinc alloy 

Nickel plated 

Bronce plated 

Housing plastic 

Coated in burgundy colour 

22 

Application 

Wardrobes and cabinets 


1 lock backset 15 mm 

right hand 


2 bar guides 

2 eccentric stoppers 

keys, escutcheons, locking bars 

to be order separately 

8 

30 

Function 



the stops. The cam extend from 

the lock case and the door will 

be locked at 3 points 

74 

25,5 

15 

18 

18 

Optional 

Other finishes, stoppers on 

triangular plate A-1026 

Left handed version 

25 mm backset 

Packing 



Item No.: 14.05.250 

etc. 

A-1036 

STRIKE PLATE 

3,2 

BIT SHAPE 

22 

12 

7 

6,5 

25 

3 

L = 1000, 1200, 1500, 2000 mm 

45

PASQUIL LOCK No. 7080 ”M” - EXTENTION BARS LOCK 

Zinc alloy 

Nickel plated 

Black 

Application 

Heave duty drawers, windows 

doors, wardrobes and cabinets 


1 lock 

1 rosette 

4 bar guides 

2 sockets 

Locking bars to be order 

separately 

17 

M6 

Ø 9 

50 41 

8 22 

Ø 19 

Option 

16,5 mm cyl. diam. and longer 

cyl. lenghts 

Function 

Turn key 180º and locking bars 

extend up and down 9 mm 

to lock and unlock 

31 

40 

Ø 6 

M6 



or kay alike 

Locking bars available 

in 1000, 1200, 2000 mm lenghts 

from stock. 

Other lenghts upon request 

10 

M6 

Packing 



Item No.: 14.05.300 

etc. 

Ø 13 

Ø 25 

Ø 20 

2 

6 

21,5 

5,5 

Ø 8,5 

10 

10 

Ø 6,5 

Application 

Shutter doors Heavy duty drawers Wardrobes 

30 

46

CAM LOCK No. X-44 FOR METAL FURNITURE ”M” 

Chrome plated 

Application 

Steel drawers, cabinets, lockers 

Snap in fixing 

Maximum panel thickness 2 mm 


1 lock 

2 keys 

1 Cam No. 27 

Function 

Turn key 90° 

To lock/unlock 

Option 



20,5 


Lock - zinc alloy 

Cam + key + spring - steel 


18,6 

min 

16 

min 

30 

Packing 



4,5 

Item No.: 14.08.070 

etc. 

25 

CENTRAL LOCK No. X-44-D FOR METAL FURNITURE ”M” 

Chrome plated 

Application 

Multi drawer pedestal 

Filing cabinets 

Snap in fixing 

Maximum panel thickness 2 mm 


1 lock 

2 keys 

Function 

Turn key 180 O to move 

self made locking bar 

to lock/unlock 

any number of drawers 


Lock - zinc alloy 

Key + cam + spring - steel 

16 

min 

22,6 14 

Packing 



18,6 

min 

6 

8,5 

Item No.: 14.08.090 

etc. 

25 

4,5 

- 

e 

47

L-HANDLE No. L-44/X ”M” 

Chrome plated 

Application 

Steel cabinets, lockers, 

wardrobes, vehicles 


1 lock handle 

1 cam plate 

1 back plate 

2 keys 


Function 

Turn handle 90° to lock/open, 

turn key to lock handle 

in closed position 

Can be applied 

for 3-way locking with 

self made pasquil bars 


Zinc alloy 


Packing 

8 pcs per box 


Item No.: 14.08.035 

etc. 

28 

2 

3 

66 

38 

SCREW 

M4 

114 

10 

14 

8 

6,5 

51 

18 

4,7 

38 

48 

8 

38 

6,5 

2 

9 

4,5 

3 

48

T-HANDLE No. T-44/X ”M” 

Chrome plated 

Application 



Accessories 

1 lock handle 

1 cam plate 

1 back plate 

2 keys 


Function 

Turn handle 90° 

to lock/open. 

turn key to lock handle 


Can be applied with self made 

pasquil bars for 3-way locking 


Zinc alloy 


or key alike 

Packing 



Item No.: 14.08.055 

etc. 

24 

79 

58 

9,5 

14 

8 

54 

18 

4,5 

36 

48 

8 

36 

2 

9 

3 

6,5 

49

L-HANDLE No. 177 ”M” 

Chrome plated 

Application 



Accessories 

1 lock handle 

2 keys 

Function 

Turn handle 90° 

To lock/open. 

Turn key to lock handle 



pasquil bars for 3-way locking 


Zinc alloy 


or key alike 

Packing 



Item No.: 14.08.056 

etc. 

67 

11 

55 

8 

14,6 

75 

51 

99 

10 

M6 x 10 

18 

CONCEALED FIXING 

10 

51 

22 

FIXING HOLE SIZES 

50

LOCKER HANDLE No. 8813 ”M” 

Lock body black plastic 

Handle + black plate chrome 

Handle Alu finish black plate 

chrome polished 

Application 

Steel cabinets, lockers 

and wardrobes 

Easy snap on mounting 

No screws required 

Function 

Turn handle 90 O to lock/open 

Turn kay to lock handle 

when in closed position 


Pasquil bars as 3-way 

locking system 


Black plastic house 

Zinc alloy handle and lock 

Keys + cam steel 


or key alike 

Item No.: 14.08.021 

etc. 

LOCKER HANDLE No. M-175 ”M” 

LOCK BODY plastic black 

HANDLE zinc alloy chrome 

satin or black painted 

Function 

Easy snap in fixing 

Turn handle 90º to Lock/Open 

turn key to lock handle when 


can be applied with self made 

pasquil bars as 3-way 

locking system 



or key alike 

Item No.: 14.08.019 

etc. 

51

LOCK ACCESSORIES 

No. 22.01.019 

Automatic Hook Latch 

for double door use 

40 

23,5 

11 

5 

No. 14.01.472 

Striking Plate 

for Roll Blind Lock X-2159 

1,5 

screw 3 mm 

22 

26,5 39,5 

38,2 

12 

45 

54 

No. 14.01.510 

Flat Striking Plate 

for Lock 850/855/853 

15 

5 

2 

Screw 

3 mm 

No. 14.01.064 

L-Shape Striking Plate 

for Lock 850 

1 

9 

30 

22 

38 

50 

16 

Screw 

3 mm 

No. 14.07.029 

L-Shape Striking Plate 

model ”KW” 

15 

1 

8 

30 

Screw 

3 mm 

No. 14.01.500 

Raised Striking Plate 

for Lock 855 

14 

14 

Screw 

3 mm 

22 

50 

62 

8 

1 

Locking Bars 

for Espagnolette Locks 

14.05.720 1000 mm Nickel Plated 

14.05.723 1000 mm Brass Plated 

14.05.724 1000 mm Bronce Plated 



14.05.730 1500 mm Bronce Plated 


Ø6 

L 

5 

Locking Bars 

for Lock 7080 




Ø 6 

14 

M6 

L 

No. 14.05.740 

Accessories 

for Espagnolette Lock 

Nickel Plated 

7 

6,5 

14 

26 

18 

14,5 

14,5 

18 

26 

26 

26 

1,8 

7,5 

6,1 

6,1 

14,5 

3,5 

3,5 

12,5 

3,5 

3,5 

16 

26 

10,5 

26 

22 

10,5 

13 

13 

10,5 

22 

26 

4 

4 

52


No. 14.05.741 

Accessories 


Nickel Plated 

3 

7,5 

21,5 

17,5 

7 

6,5 

14 

26 

18 

26 

14,5 

14,5 

26 

18 

26 

3,5 

6,1 

6,1 

12 

3 

26 

3,5 

16 

10,5 

26 

22 

10,5 

13 

3,5 

13 

3,5 

10,5 

22 

26 

26 

4,6 

3,7 

4 

4 

No. 14.05.850 

Screw On Stop 

eccentric Nickel Plated 


1,8 

7 

No. 14.05.875 

Screw On Stop 

centric 5 mm height head 

1 

7,5 

14,5 

5 

12,5 

15 

3,5 

3,5 

Triangular Locking Bolt 


No. 14.05.745 Nickel Plated 

No. 14.05.746 Bronce Plated 

3 

3 

7,5 

21,5 

3,5 

17,5 

No. 14.05.890 

Door Stops 25 x 25 mm 

brown plastic used 

in connection 

with Espagnolette Locks 

22 

7 

3,2 

12 

12 

26 

6,5 

25 

3 

4,6 

3,7 

No. 14.01.091 

Plastic Spacer 

for Lock 850 

Transparent Colour 

30 

29 

3 

8 

14.02.000 

Plastic Drawer Stop 

16 

2 

Ø4,5 

40 

R11 

40 

Ø3,5 

15 

4,5 

3 

55 

Locking Bar 

for Lock 1018 

14.04.181 L - 500 mm 

14.04.185 L - 600 mm 

14.04.190 L - 700 mm 

14.04.200 L - 800 mm 

14.04.221 L - 1200 mm 

14.04.230 L - 1300 mm 

L 

16 

7 

9,5 

24 

3 

33 

No. 14.02.010 

Plastic Drawer Stop 

for Central Locks 

Black cc 20 mm 

19 

10 

35 

20 

8,5 

Ø4 

53


No. 14.02.011 

Metal Drawer Stop 

for Central Locks 

on metal furniture 

10 

51 

30 

R 4,5 

R10 

20 

Drawer Stop 913 - A 

No. 14.02.030 Left Hand 

No. 14.02.020 Right Hand 

LEFT 

26 

40 

12 

8 

1,5 

5 

9 

16,8 

10 

RIGHT 

8 

40 

12 

26 

No. 14.04.089 

Plastic Bar Guide 

holder for locking bars 

38 

32 

3 

No. 14.04.091 

Metal Bar Guide 

holder for locking bars 

38 

29,5 

4 

20 

11 

20 

12 

17 

1,5 

6,5 

4 

17,5 

1 

6 

20,5 

19,5 

No. 14.03.285 


for lay on locking bars 

42 

31 

3 

No. 14.03.286 


for locking bars 

14 

42 

32 

20 

20 

8 

3,4 

8,5 

2 

7,2 

17 

1,8 

7 

8 

20 

5,4 

16,3 

No. 14.03.280 

Plastic Bar Catch 

Lyra Shaped Model 1027 

30 

3,2 

1,5 

2 

No. 14.03.281 

Plastic Bar Catch 

Lyra Shaped Model 1030 

32 

20 

5,4 

8 

2 

19 

31 

42 

32 

42 

20 

30 12 

42 

6,5 

3,4 

7,2 

16,3 

Antitilt Block Plastic Black 

Model 1018.030 

No. 14.03.270 Right Hand 

14,5 

22 

66 

37,8 

Antitilt Block Plastic Black 

Model 1018.030 

No. 14.03.271 Left Hand 

66 

37,8 14,5 

22 

10 

10 

39,7 

4 

8,5 

5,4 

16,5 

3 

16,5 

5,4 

3 

8,5 10 

39,7 

4 

10 

7 

7 

54


Adjustable Peg 

with premounted screw 

14.04.305 L - 5 mm 

14.04.312 L - 6 mm 

14.04.310 L - 8 mm 

14.04.320 L - 11 mm 

14.04.330 L - 13 mm 

14.04.350 L - 19 mm 

3,3 

L 

16,3 

6 

L 

19 

19 

Prolongation Screw 13 mm 

for adj. peg. L - 13 mm 

No. 14.03.460 

3,3 

16,3 

19 

6 

13 

19 

7 

16,3 

7 

4,5 

M4 

6 

13 

9 6 

Prolongation Screw 

for Push Lock 1003 and 1004 

No. 14.04.461 

Rosette - 19 mm 

Nickel Plated 

No. 14.04.300 

2 

5 

6 

Ø 19 

Ø 20 

Ø 7 Ø 25 

6 

Cams for Cam Lock 

different models and sizes 

as per special pages in our 

catalogue (pages 61-67) 

illustrating such standard 

cams 

No. 14.04.241 to 

No. 14.04.299 

Metal Clip 

for Cam Lock 

No. 14.08.119 

30 

13 

20,5 

7 

0,8 

Metal Washer 

for Lock 689 

No. 14.09.155 

Ø38 

Ø3 

Transparent Washer 

ØD - 22 mm, Ød - 16 mm, 

thickness - 1 mm 

No. 14.09.301 

Ø22 

Ø13 

8,5 

Ø16 

Ø4 

1 

1 

Plastic Washer ”SAFE” 

No. 14.09.340 

Ø25 

Ø19 

Front Plate 

for Lock X-916 

No. 14.09.066 

7 

16,5 

30 

Ø19,6 

48 

56,5 

3,5 

1 

1 

2 

55


Knock in Pivot Stop 

for Lock 689 

No. 14.09.117 

Knock in Pivot Stop 

for Lock 910 

No. 14.09.118 

Glass Door Catch No. 470 

Black Plastic 

No. 14.09.119 

Loose Cylinders 

System 11 and 12 

all with Hinged Keys, Key 

Different and Key Alike 

No. 14.03.801 to 

No. 14.04.067 

Blank Metal Key 

for lock X-750 

No. 14.04.092 


for YALE KEYWAY 

Profile Cylinders 

No. 14.04.094 


for FAB KEYWAYY 

Profile Cylinders 

No. 14.04.093 


round shape FN2 KEYWEY 

No. 14.04.099 

Blank Car Key 

single entre F01 KEYWEY 

No. 14.04.102 

Blanked Hinged Car Key 

FN2 KEYWEY 

No. 14.04.103 

56


Blank Car Key 

double entre FN2 KEY WEY 

NEW 

No. 14.04.106 

Blank Car Key 

double entre for 7 Waffer 

Locks 

No. 14.04.1111 

Key For Cam Lock 1216 

No. 001 

all key same code 

for Lock No. 14.04.480.0 0 

No. 14.04.115 

Master Key 

for Coin Lock 

No. 14.04.116 

Master Key 

for System 11 

No. 14.04.119 

Master Key 

for System 12 

No. 14.04.123 

Key For Changing 

Cylinders 

System 11 

No. 14.04.127 

Key For Changingg 

Cylinders 

System 12 

No. 14.04.129 

Key For Changing 

Cylinders on Coin Locks 

System 11 

No. 14.04.131 

Triangular Bit Key 

for Lock 334 (No. 14.04.483.0) 

No. 14.04.140 

57


Short Metal Key 

with harpoons for knocking 

into decorative knobs 

No. 14.04.081 

Key Knob 

Zinc Alloy 

Matt Chrome Finish 

No. 14.04.080 

FURTHER KEY KNOB MODELS AVAILABLE 

Key Knob 

No. 14.04.080 

Key Knob 

No. Cu - 160 

Key Knob 

No. Cu - 146 

Key Knob 

Key Knob 

No. Cu - 164 No. Cu - 157 

58


Square rosette 

Alu finish 

Nickel plated 

For cylinder diam. 

16,5 and 19 mm 

Square rosette can be used for 

many locks: 

850, 1018, 1003, Espagnolette 

locks etc. 

Item No.: 14.04.302 

etc. 

9 

22 or 25 

30° 

5 

R1 

22 or 25 

30° 

Ø20 or Ø22 

Ø16,8 or Ø19,3 

59

7 

1 

R 8 

8,10 

R 8 

15 

8,10 

8,50 

36,50 

45 

8,10 

2 

4 

R 8 

R 8 

15 

8,10 

CAM PLATES No. 1-24 

39,30 

47,80 

R 8 

8,10 

3 

R 8 

R 8 

15 

8,10 

29,50 

38 

R 8 

4 

8,10 

4 

R 8 

15 

8,10 

36,50 

45 

R 8 

5 

3 

8,10 

15 

8,10 

10,50 

16 

28,50 

9 

36 

5 

15 

8,10 

15 

8,10 

15 

8,10 

15 

8,10 

15 

8,10 

15 

8,10 

39,30 

46,40 

34 

39,30 

47,80 

23,30 

30,80 

25,90 

33,40 

39,30 

35 

39,30 

36,50 

8,10 

8,10 

8,10 

8,10 

8,10 

8,10 

28° 

R 8 

6 

7 

R 8 

8 

9 

10 

11 

R 8 

8,10 

2 

15 

R 8 

15 

8,10 

1,50 

6,50 

15 

8,10 

8,10 

15 

16,80 

8,10 

8,10 

128° 

8,10 

33 

40 

48,5 

159° 

8,10 

11,30 

16,50 

23,50 

31 

153° 

R 1,50 

5° 

16 

63,50 

25 

12 

13 

14 

15 

2 

13 

R 2 

15 

15 

15 

15 

8,10 

8,10 

7 

8,10 

15 

8,10 

6,10 

8,10 

8,10 

37,50 

45 

35 

43 

31 

39,5 

R 8 

8,50 

15 

8,10 

30° 

5 

15 

8,10 

120° 

27,20 

8,10 

8,10 

38 

46 

13,50 

21,50 

8,10 

8,10 

16 

R 8 

17 

18 

19 

20 

8,10 

R 8 

13,20 

35,70 

6,10 

13 

25 

33,50 

8,10 

25 

140° 

15 

6,10 

1,80 

6,20 

63 

28 

R 8 

R 26,20 

20 

21 

22 

23 

24 

60

8,10 

25 

R 8 

15 

8,10 

R 8 

51,50 

60 

105° 

26 

11 

8,10 

R 8 

6 

15 

8,10 


8,50 

39,50 

48 

8,10 

R 8 

27 

R 8 

15 

8,10 

31 

R 8 

39 

8,10 

R 8 

R 10,60 

R 8 

29 

R 12 

15 

8,10 

41 

R 8 

1,50 

49 

8,10 

R 10,60 

R 8 

30 

15 

8,10 

R 8 

12 

31 

4 

1,50 

39 

15 

8,10 

2 

15 

8,10 

15 

8,10 

1,50 

15 

8,10 

15 

13 

8,10 

5,60 

25,50 

33,50 

8,10 

R 8 

R 8 

R 8 

15 

15 

6 

15 

6,10 

15 

6,10 

11 

8,10 

51,50 

60 

36,50 

45 

8,10 

6,50 

152° 

55 

63,50 

51,50 

60 

22,50 

6,10 

6,10 

R 8 

6,50 

R 8 

R 8 

15 

15 

15 

6,10 

8,10 

8,10 

15 

1,50 

15 

8,10 

8,10 

16,50 

19,44 

23,50 

31 

8,10 

150° 

153° 

30,10 

38,60 

45 

53,50 

44 

50 

11,50 

45 

53,50 

8,10 

11 

45° 

44 

52 

6,10 

34 

8,10 

R 10,60 

8,10 

42 

50 

12 

42 

8,10 

39 

12 

8,10 

R 10,6 

8,10 

1,50 

31 

8 

32 

33 

34 

35 

36 

37 

38 

39 

8,10 

5 

R 8 

28° 

40 

41 

42 

43 

44 

61


15 

15 

16,50 

9,50 

8,10 

Ø 3,50 

8,10 

8,10 

R 8 

6,10 

14,50 

36,50 

45 

8,10 

31 

40 

15 

6,10 

55 

13 

R 8 

65,50 

R 8 

15 

8,10 

8,10 

17 

21 

29 

2 

128° 

R 8 

7,20 

156° 

1,50 

6 

15 

6,10 

126° 

R 8 

6,10 

R 8 

6,10 

15 

6,10 

15 

6,10 

8,40 

6,10 

34,90 

43,30 

14,40 

34,90 

43,30 

23,70 

22,20 

30,60 

6 

15,90 

8,10 

113° 

35,30 

43,30 

15 

29,90 

8,10 

8 

9 

2 

R 10 

90° 

113° 

3 

15 

8,10 

14,50 

15 

8,10 

3,60 

15 

8,10 

36° 

39,50 

47,50 

38 

46 

16,50 

13,50 

16,95 

23 

31 

8,10 

8,10 

8,10 

39° 

R 16,30 

3,60 

15 

8,10 

16 

15 

8,10 

12 

8,10 

8,10 

144° 

8,10 

39 

47 

29,50 

40 

47 

16,50 

15,50 

8,10 

5 

15 

8,10 

8,10 

16,50 

15 

8,10 

8,10 

12 

7,57 

43 

53 

39,30 

47,30 

R 8 

16 

15 

8,10 

15 

6,10 

6,10 

6,10 

R 3 

20,70 

29,50 

7,50 

37,50 

43 

51 

8,10 

96° 

R 5 

37,50 

46 

34 

42 

6,10 

8,10 

36,50 

45 

11 

45 

46 

47 

49 

50 

51 

52 

53 

54 

55 

56 

56b 

57 

58 

59 

60 

15 

8,10 

10,50 

R 2 

R 2 

R 8 

146° 

12 

9,50 

R 8 

9,50 

61 

62 

63 

64 

62

113° 


15 

8,10 

15 

8,10 

15 

8,10 

2 

113° 

25,40 

33,40 

33 

41 

8,10 

13,20 

22,40 

8,10 

8,10 

30,40 

13,50 

R 8 

6,10 

15 

6,10 

65 

11 

R 26 

R 0,50 

66 

2 

22 

67 

68 

35 

43 

24 

15 

6,10 

8,10 

7,20 

8,10 

8,10 

R 11 

8,10 

15 

R 8 

5,80 

8,10 

6,10 

10,50 

8,10 

15 

35 

14 

43 

23° 

45,30 

53 

33 

11 

52 

8 

R 8 

33 

18,50 

2 

149° 

5 

R 4 

29 

69 70 

71 72 

14,30 

15,80 

14,30 

15,80 

15 

15 

8,10 

8,10 

58,60 

49,30 

12,30 

8,10 

3,70 

8,10 

3,70 

47 

55 

R 1,85 

50,80 

58,80 

12 

10,30 

12 

73 10,30 

74 75 5,50 76 

15 

8,10 

5,30 

15 

8,10 

30,60 

24,65 

6,10 

8,10 

12,30 

8,10 

11,70 

15 

8,10 

9 

3,50 

45° 

6,10 

15 

36 

50,80 

58,80 

8,10 

25 

58,60 

49,30 

54,70 

R 1,85 

63,20 

28,95 

16 

32,50 

R 8 

2 

2 

4 

78 79 80 82 

63

140° 

R 8 

3 


15 

8,10 

2 

15 

8,10 

8 

15 

8,10 

8,10 

8,10 

8,10 

25,50 

8,10 

R 8 

25 8 

33,50 

7 

R 8 

31 

39 

2 

R 8 

37,50 

45,50 

49,50 

57,50 

16,50 

8,10 

15 

84 85 

86 

87 

15 

15,30 

8,10 

8,20 

15 

4,71 

R 10 

8,10 

15 

8,10 

8,20 

12,50 

1 

8,10 

7,20 

6,44 

28,60 

8,10 

150° 

38,40 

47,21 

60 

10 

68,50 

170° 

8,10 

5,78 

17,15 

25,20 

2 

38 

46 

100° 

7,30 

R 16 

2 

R 8 

20,40 

7,50 

88 89 90 91 

14,60 

15 

8,10 

8,10 

15 

8,10 

R 20 

7 

1,5 

R 8 

7,70 

R 8 

15,60 

7,70 

8,90 

5,65 

6,10 8 

13 

6,10 

22,40 

30,60 

8,10 

9,80 

32 

40 

53,40 

40 

5 

5 

20 

27° 

26 

42 

R 6 

4,75 

R 29,80 

8,10 

1,50 

8,10 

22 

15 

8,10 

15 

6,10 

59 

51 

12 

R 10,6 

8,10 

15 

8,10 

33,50 

41,50 

8,10 

29 

37 

35,40 

2 2 

8 

R 3 

6 

R 10,40 

4 

22° 

101° 

15,50 

25,50 

R 1 

4 

92 93 

94 

95 96 

6,10 

120° 

63 

13,50 

9,50 

R 8 

71 

97 98 99 

101 

64

R 3,60 


15 

6,10 

15 

8,10 

15 

8,10 

15 

8,10 

R 19,50 

44,20 

6,10 

53 

61 

12,70 

8,10 

32 

40 

8,10 

155° 

52 

60 

15 

8,10 

15,70 

19 

27 

2 

165° 

69,30 

T = 3 mm 

45,60 

9,50 

R 8 

6,80 

7,90 

3,80 

63,20 

20,20 

15,40 

102 103 104 105 106 

7,30 

15 

2 x R 19,50 

19 

15 

R 19,75 

8,10 

8,10 

15,70 

31,80 

7,85 

74,20 

24,20 

8,10 

5,50 

31,80 

42 

48 

5,20 

5,50 

3,80 

35 

43 

10 

8,10 

9,50 

2 X R 10 

55,20 

T = 2,7 mm 

9,80 

7,90 

15,70 

3,80 

3 

R 8 

17,27 

107 

108 109 110 112 

- ONLY FOR CAM LOCKS 5250 SERIES 

- ONLY FOR CAM LOCKS 1900 SERIES 

65

37,4 

69 

10,2 

8,1 

CAM PLATES FOR T&L AND LOCKER HANDLES 

3,2 

2-Ø5 

3 

49,2 

3 

3 

47,7 

9,7 

6,8 

5 

8,1 

8,1 x 8,1 8,1 x 8,1 

38,6 

52,2 

60 

52,1 

66,7 

13 

54,2 

3 

16,8 

TL-101 

20,4 20 

TL-102 

TL-103 

13,6 

TL-104 

2-Ø5,5 

3 

10,2 

3 

51,7 

35,7 

10,2 

3 

51,7 

35,7 

10,2 

3 

5 

10,2 

5 

10,2 

5 

10,2 

10,2 

28 

2-Ø5,5 

2-Ø5,5 

36 

52,2 

82 

2,5 

82 

6,8 

50 

69 

23 

16,8 

TL-105 

20,3 

TL-106 

20 TL-107 

20 

TL-108 

51,7 

35,7 

10,2 

3 

51,7 

35,7 

3 

51,7 

35,7 

10,2 

3 

10,2 

5 

10,2 

10,2 

5 

2-Ø5,5 

10,2 

5 

2-Ø5,5 

64,6 

78 

12,8 

2-Ø5,5 

50,8 

24,6 

57 

70,4 

20 

4,8 

20 

20 

TL-109 TL-110 TL-111 

66

GLASS DOOR LOCK MODEL ”AUDIO” ”MIC” 

Plastic black #14.09.256 

Application 

Hinged glass doors 

particularly for audio/hi-fi cabinets 

No boring required 


1 lock 

1 washer 

2 screws 

2 keys 

Function 


to lock or unlock 


Plastic/metal combination 

one key change only 

Packing 



GLASS DOOR LOCK ”VITRIO” ”MIC” 

Chromeplated #14.09.350 

Brassplated #14.09.360 

Application 

Double hinged glass doors 


A) left door 

1 decorative cylinder 

1 stainless steel front plate 

1 hexagonal nut 

1 plastic washer 

B) right door 

1 off-set hook cam 

1 stainless steel front plate 



2 car keys 

Function 

Turn key 90 O to lock 

or unlock 


Cylinder zinc alloy 

front plates stainless steel 


Packing 



67

GLASS DOOR LOCK No. 689 ”MIC” 

MODEL AND FINISH 

NO.689 

Chrome plated #14.09.130 

Nickel mat #14.09.131 

Brass plated #14.09.129 

Alu finish #14.09.132 

Black #14.09.136 

Application 

Glass hinged doors 4-6 mm 

Bore: Ø 26 mm 


1 cylinder lock 


1 die cast stopper 

2 car keys, double entry 

Function 


or unlock - w/click sound 


Zinc alloy 


or key alike 

Packing 

20/200 pcs per box 

Option 

Lock can be suplied with special 

designed plate for double 

hinged door 


Mat nickel #14.09.171 


Gold #14.09.173 

DOOR STOPER 

DOOR STOPER w/hole (for insert 

glass door lock) #14.09.118 

Finish: black plastic 

Application: inset glass door 

hinged 

Recommended to use with locks 

X-689 and 910 (as a stopper and 

strinkig plate) 

DOOR STOPER w/bumper 

#14.09.105 

Finish: black plastic 

Application: glass door hinged 

Recommended to use with lock 

0914 

68


MODEL AND FINISH No. 910 


Nickel plated #14.09.111 

Brass plated #14.09.112 

Black #19.09.114 

Application 

Glass hinged doors 

Bore: 

4-5 mm 

Ø 26 mm 


1 cylinder lock 

2 washer (plastic & rubber) 

2 metal keys, double entry 

Function 

Turn key 180 O to lock or unlock 

- w/click sound 

13 


Zinc alloy 


Options: master key and 

interchangeable cylinder 

Packing 


GLASS DOOR LOCK MODEL ”SAFE” ”MIC” 

MODEL AND FINISH ”SAFE” 


Application 

Single glass door, hinged 

Bore 

Ø 19 mm 


1 cam lock 



1 straight cam 

1 front plate 



Function 

Turn key 90 O 

to lock or unlock - w/click sound 

Specification 

Zinc alloy 


or key alike 

Packing 


240 pcs per export 

69

GLASS DOOR LOCK No. X-916 ”MIC” 

DOUBLE OR SINGLE DOORS, HINGED 


X - 916 PLATE & CYLINDER 

Black #14.09.047 


Gold plated #14.09.049 

Application 

Hinged glass doors 4-6 mm 

Bore 

Ø 19 mm 


1 cam lock 

1 straight steel cam 

1 plastic washer + 1 hex nut 

1 flat striking plate: 

11 x 57 mm, npl 


1 front plate diecast 

Function 

Tturn key 180 O to lock 

or unlock - w/click action 


Plate & house: zinc alloy 


Packing 



MODEL AND FINISH No. 917 




Application 

Double glass doors, hinged 



1 lock w/large front plate 

2 fastening screws 


2 car keys double entry 

1 plastic distance plate 

Optionals 

Door stopper #14.09.118 

Spring stopper #14.09.119 

Function 


and reverse to unlock 


Zinc alloy 

400 key combinations or key 

alike and master key system 

Packing 


240 pcs per export box carton 


70

GLASS DOOR LOCK No. X-907, SLIDING DOORS ”M” 


Mat nickel #14.09.416 


Black finish #14.09.419 

Application 

Glass sliding doors 

Accessories 

1 lock 


2 transparent washers 

Function 

Push and turn key 

90 O to lock or unlock 


Zinc alloy 


Options 

Master key or key alike 

19 

Packing 


BRASS GLASS DOOR LOCK ”SWAN” 

40 

Finish 


40 

Material 

Brass 


1 cylinder ø 20 x 23 mm 

1 front plate w/bottom 

support 40 x 40 mm 

1 back plate 40 x 40 mm 

2 SISO metal keys, 

key alike 

2 transparent cushions 


1 off-set brass cam 

1 raised brass striker 

A 

40 

glass 

8-10 

2 

1 

1 

2 

Function 


or unlock 

40 

Packing 


A 

14,5 

7 

24 

3 

40 

71

GLASS DOOR LOCK No. 64081 SINGLE DOOR, HINGED ”MIC” 


64081 

NO. 



Black #14.09.212 

Application 




1 lock w/front plate: 





Function 




Zinc alloy 


or key alike 

Packing 



GLASS DOOR LOCK No. X-918 ”MIC” 

MODEL AND FINISH NO. 918 




Application 

Single glass doors, hinged 



1 lock w/front plate 





Optionals 



Function 




Zinc alloy 

400 key combinations or key 

alike and 

master key system 

Packing 



72

STRIKER FOR DOUBLE HINGED DOORS 

& DOOR STOPER 


STRIKER 




Application 








Packing 



DOOR STOPER w/catch 

(for inset glassdoor) #14.09.119 

Finish 

Black plastic 

Application 

Inset glass door hinged 

Can be used as a shelf support 

Max glass thickness 6,5mm 

GLASS DOOR LOCK ”VETRO” ”MIC” 


VETRO 



Black #14.09.262 

Application 



Max 8 mm glass thickness 







Function 




Zinc alloy 


or key alike 

Packing 



18.5 

8 

3 

9 

1.5 

35.8 

10 

18 

32 

15 

22 

38 

50 

5 

2 

73

”VETRO-DOUBLE” ”MIC” 

FOR SINGLE & DOUBLE DOORS, HINGED 


VETRO-DOUBLE 



Black #14.09.272 

Application 

Double glass doors, hinged 


Max 8 mm glass thickness 







Optionals 



Function 




Zinc alloy 


or key alike 

GLASS DOOR LOCK ”MINI” SLIDING DOORS 

Chrome plated 

Aplication 

Wooden, metal 

or glass sliding door 

Accesories for one set 

1 lock 

2 car keys 

1 nut 

Function 

To lock - push the cylinder 

To unlock - turn key 


#14.03.040 

Key alike 

#14.03.041 

Options 

15 000 key combinations 

Packing 


5 box per export carton 

74

GLASS DOOR LOCK No. X-750 

NO. X-750 - 100 mm, cpl 

#14.09.025 

NO. X-750 - 132 mm, cpl 

#14.09.030 

NO. X-750 - 135 mm, cpl 

#14.09.029 

Application 



1 removable lock 

1 ratchet 100 or 132 or 135 mm 

1 screw w/protection pad 

2 metal keys 

Function 

Mount ratchet into lock with flat 

end facing the fastening screw 

(see illustration). 

Turn key 180 O and remove key 

to activate the lock 

100, 132 or 135 


Zinc alloy lock 

Ratchet steel 


or key alike 

Packing 



GLASS DOOR LOCK No. 409 

Chromeplated #14.09.300 

Application 



1 plug - in cylinder 

1 housing (2 parts) 

3 washers 

2 screws 

2 keys 

Function 

Place cylinder into lock case, 

turn and remove key, 

key removable in locked 

position only 


Zinc alloy lock 


#14.09.300 

or key alike #14.09.315 

Packing 



75

PUSH BUTTON LOCK No. 8600 „M“ 

FOR DOUBLE SLIDING GLASS DOORS 

Finish 

Chrome plated # 14.09.420 

Alu finish # 14.09.423 

Chrome w/Master key # 14.09.422 

Application 

Double sliding glass doors 

on alu rails 

Accessories 

1 lock cylinder ø 22 mm 

1 grub screw for fastening 

2 metal keys, double entry 

Function 


Turn key to unlock 

Specification 

Zamak house: 28 x 24 x 12 mm 

400 key combinations or key alike 

Option 

Master key 

Packing 



16,5 

28 

9 

23,4 15 

14 

22 

M4 

5 

ACCESSORIES 

BOTTOM TRACK 

Aluminium: 

Anodized # 22.26.030 

Standard length: 2 metres 

TOP E-TRACK 

Aluminium: 

Anodized # 22.26.010 


GLASS H-RAIL 

Aluminium: 

Anodized # 22.26.020 


For 5 mm glass thickness 

27.5 

12 

11.1 

10.6 

TROLLEY w/Nylon Wheels 

Nickel plated # 22.26.040 

Load capacity: 3 kg 

U-SPLINE PLASTIC # 22.26.060 

Rolls of 100 mts 

SILENCER # 22.26.070 

Plastic, clear 

Bags of 100 pcs 

END CAP ZAMAK 


Alu finish # 22.26.049 

76

PUSH BUTTON LOCK No. 2010 „M“ 

F/DOUBLE SLIDING GLASS DOORS 

Finish 

Alu finish # 14.09.460 


Gold mat plated # 14.09.463 

Gold bright plated # 14.09.462 

Application 

Double sliding glass doors 

premounted on aluminium frame 


1 cylinder push lock ø22 mm 

1 universal bottom part 

premounted for insertion 

into H-rail on left or right side 

2 grub screws for fastening 

onto the h-rail 

5 allen keys for every 

20 lock sets for tightening the grub 

screws 


Function 


and turn key to unlock 

ACCESSORIES 

Specification 

Zamak with 400 key combinations 

or key alike 

Option 

Master key system 

U-SPLINE PLASTIC 

# 22.26.060 

Rolls of 100 mts 

SILENCER 

# 22.26.070 

Plastic, clear 

Bags of 100 pcs 

END CAP ZAMAK 

Chrome plated 

# 22.26.051 

Alu finish 

# 22.26.052 

Packing 



BOTTOM TRACK 

Aluminium: 

Anodized # 22.26.030 


TOP E-TRACK 

Aluminium: 

Anodized # 22.26.010 


GLASS H-RAIL 

Aluminium: 

Anodized # 22.26.021 


For 5 mm glass thickness 

29 

12 

10 

14 

TROLLEY w/Nylon Wheels 

Nickel plated # 22.26.041 

Load capacity: 3 kg 

77

GLASS DOOR LOCK ”BADGE” F/SINGLE DOORS ”MIC” 

Material Zamak 



Black anodized #14.09.502 


Application 

Glass door lock for single doors 


F/Glass thickness 4-5 mm 


or key alike 

Optional with master key 

& interchangeable system 

4-5 mm 

Glass 

thickness 

37 

mm 

Each lock is supplied with 

2 SISO metal keys 

2 ABS plastic screw w/soft PVCtip 

for tight fastening without 

boring 

1 Flat metal striking plate (not 

illustrated) 

Packing 


40 mm 

30 mm 

ABS plastic screws 

78

GLASS DOOR LOCK ”BADGE” F/DOUBLE DOORS ”MIC” 

Application 

Glass door lock for double doors 






Each lock is supplied with: 


2 ABS plastic screw w/soft PVCtip 

for tight fastening without 

boring 

1 Flat metal striking plate 

Specification 

Material Finish Item No. 

Zamak Chrome Plated #14.09.540 

Zamak Alu Finish #14.09.541 

Zamak Black Anodized #14.09.542 

Zamak Gold Plated #14.09.543 

Function 

Turn key 180° to lock or unlock 

Packing 


4-5 mm 

Glass 

thickness 

40,5 

mm 

42 mm 

37 

mm 


79

DOUBLE DOOR STRIKER F/SINGLE DOOR LOCK ”BADGE” 

Application 

Double door striker f/single 

glass door lock 


F/Glass thickness 4-5mm 

Each striker is supplied with: 

2 ABS plastic screw w/soft 

PVC-tip for tight fastening 

without boring. 

Function 

Turn key 180° to lock or 

unlock 

Packing 


Specification 






EDGE STRIKER F/SINGLE DOOR LOCK ”BADGE” 

ABS Plastic Screws 

Application 

Edge striker f/single glass door lock 

To be used when the glass door is to 

be flush with the edge of the cabinet 

Knock-in pins. Bore: ø 5 x 9 mm 

Packing 


Specification 






80

EDGE STRIKER F/DOUBLE DOOR LOCK ”BADGE” 

Application 

Edge striker f/double glass door lock 




Packing 


Specification 






SISO METAL KEYS 

Design to the fingertip 

Application 




Packing 


DESIGN REGISTERED 

81

GLASS DOOR LOCK ”SQUARE” F/SINGLE DOORS ”MIC” 

Application 

Glass door lock for single doors 








2 ABS plastic screw w/soft PVC-tip 

for tight fastening without boring 


(not illustrated) 

4-5 mm 

Glass 

thickness 

37 

mm 

Packing 


40 mm 

30 mm 

Specification 







82

DOUBLE DOOR STRIKER F/SINGLE DOOR LOCK ”SQUARE” 

Application 

Double door striker f/single glass door 

lock 




2 ABS plastic screw w/soft PVC-tip for 

tight fastening without boring 

Packing 


Specification 







EDGE STRIKER F/SINGLE DOOR LOCK ”SQUARE” 

Application 

Edge striker f/single glass door lock 




Packing 


Specification 






83

GLASS DOOR LOCK ”SQUARE” F/DOUBLE DOORS ”MIC” 

Application 

Glass door lock for double doors 








2 ABS plastic screw w/soft PVC-tip for 

tight fastening without boring 


(not illustrated) 

4-5 mm 

Glass 

thickness 

Packing 


40,5 

mm 

37 

mm 

42 mm 


Specification 






84

EDGE STRIKER F/DOUBLE DOOR LOCK ”SQUARE” 

Application 

Edge striker f/double glass door lock 




Packing 


Specification 






85

CONCEPT “BADGE” AND “SQUARE” 

Glass Door Lock 

f/ Single Doors 

Chrome Plated # 14.09.500 

Alu Finish # 14.09.501 

Black Anodized # 14.09.502 

Gold Plated # 14.09.503 


f/ Double Doors 


Alu Finish # 14.09.541 



Double Door Striker 

f/ Single Door Lock 


Alu Finish # 14.09.511 



Edge Striker 



Alu Finish # 14.09.516 



Edge Striker 

f/ Double Door Lock 


Alu Finish # 14.09.551 




f/ Single Doors 


Alu Finish # 14.09.521 




f/ Double Doors 


Alu Finish # 14.09.556 



Double Door Striker 



Alu Finish # 14.09.531 



Edge 

Striker 

f/ Single 

Door Lock 


Alu Finish # 14.09.536 



Edge Striker 

f/ Double Door Lock 


Alu Finish # 14.09.566 



86

SOLID BRASS PROFILE CYLINDERS 

Euro Profile Cylinders Yale or FAB keyway with 1 mounting screw 65 mm and 3 brass keys - with 5 pins 

No. L A B FINISH 

14.60.037 62 26 26 Nickel satin - Yale keyway 

14.60.038 62 26 26 Brass satin - Yale keyway 

A 

10 

L 

Ø 17 

B 

33 


14.60.043 70 30 30 Nickel satin - Yale keyway 


14.60.071 65 30 25 Brass polished - FAB keyway 

14.60.074 65 30 25 Nickel satin - FAB keyway 



14.60.116 70 30 30 Nickel plated - FAB keyway 




















87

SOLID BRASS PROFILE CYLINDERS 

No. L A B 

14.60.027 60 25 25 

Finish 

Brass polished 

Yale keyway 

18 

9 

10 

Ø 17 

Ø 30 

33 

A 

B 

L 

No. L A B 

14.60.028 60 25 25 

Finish 

Brass polished 

Yale keyway 

32 

Ø 17 

9 

10 

43 

33 

A 

B 

L 

88

KEYLESS COMBINATIONS LOCK No. 10048 - 10050 

Zinc alloy die cast 

Bright chrome plated standard 

Application 

Metal/non-metal wooden doors, 

drawers, cabinets, boxes etc. 

and cabinrts 

Rotation angle 90 O CW or CCW 

1 hex. nut and 1 cam lever, 


Lenght available ”L” 

19, 24, 30,5 mm 

1000 possible combinations 

Item No.: 

L = 19 10048 

L = 24 10049 

L = 30,5 10050 

31 

0 9 8 7 

4 3 2 1 

8 7 6 5 

Ø19 

15 

8 

New model 

L 

Ø29 

KEYLESS COMBINATIONS LOCK No. 10051 - 10053 

Zinc alloy die cast 

Bright chrome plated standard 

Application 

Metal/non-metal wooden doors, 

drawers, cabinets, boxes etc. 

and cabinrts 

Rotation angle 90 O CW or CCW 

1 hex. nut and 1 cam lever, 


Lenght available ”L” 

19, 24, 30,5 mm 

16 

1000 possible combinations 

Ø19 

L = 19 10051 

L = 24 10052 

L = 30,5 10053 

Item No.: 14.08.025 

etc. 

38 

0 9 8 7 

4 3 2 1 

8 7 6 5 

L 

Ø30 

89

KEYLESS COMBINATIONS LOCK MODEL 1156 

24 

Application 

Metal, wood, plastic, glass 

3 digit for vertical application 

Left, light grey 

The code is set by moving 

the knob onto the code setting 

position. 

When the lock is open or closed 

the code is automatically 

scrambled. 

No one can see your code. 

65 

6 

6 

6 

7 

7 

7 

8 

8 

8 

24 

23 

63 

New model 

KEYLESS COMBINATIONS LOCK MODEL 1153-CCC 

3 digit for horizontal application 

Right or left models, 

black colour. 

As standard setting the correct 

code opens the lock. 

If code is known no other key 

are necessary. 

A janitor or house keeper, 

however, may use the key to 

open the lock and find out 

the pre-set code. The dials are 

turned to the code as soon as 

knob is turned. 

28 

9 

8 

7 

9 

8 

7 

9 

8 

7 

23 

New model 

72 

24 

67 

90

KEYLESS COMBINATIONS LOCK MODEL 1153-CCV 

3 digit for horizontal application 

Right or left models, black 

colour. 

After opening the lock the dials 

are turned automatically thus 

they hide secret of the individual 

code. 

The override key opens the lock 

without the code. 

So service people, house 

keeper, etc. can open the locker. 

28 

9 

8 

7 

9 

8 

7 

9 

8 

7 

23 

New model 

72 

24 

67 

BLACK PLATES FOR KEYLESS COMBINATIONS LOCK No. 1153 

Black plates No. 1157/815 

to be used when applying the 

lock No. 1153 on metal, plastic 

or glass 



to bee used when applying 

the lock No. 1153 on wood 


91

OTHER SPECIAL LOCKS 

Models supplied to different customers according to their specific inquiries 

MORTISE LOCK No. 9045 

50 x 90 backset, without 

cylinder, square hole 8 x 8 mm 

50 

White lacquered with screw 

and striker 

Item No.: 14.60.053 

90 

168 213 

14 

3 

80 

MORTISE LOCK No. 9403 

Chrome plated 

With 3 keys, screws and striker 

14 

20 

20 mm backset - mainly 

developed for aluminium 

sliding doors 

36 

Item No.: 

Key alike 14.60.049 

Key different 14.60.050 

103 140 160 

20 

92


EASY CODE DIGITAL LOCK 

No. DL-3154 


1 lock case 

1 back plate 

2 neoprene seals 

1 spindle 

1 latch (60 mm standard) 

1 striker plate 

4 wood screws 

1 latch sopport post 

3 fixing bolt 

Item No.: 14.60.500 

9 

46 

46 

28 

158 

1 

2 

3 

4 

5 

X 

Y 

6 

7 

8 

9 

0 

Z 

C 

158 

25 

3 

Ø22 

42 

56 

80 

60 

93


Cam Lock with handle 

Model No. 323 

Ø 19 x 16, 20, 25, 30 mm 

Cam Lock 1920 - 90° 

with triangular bit key, 

cam No. 9 

Item No.: 14.04.483 

Cashier Desk Lock M-1920 

180° rotation with 2 stops 

at 90° and 180° 

Item No.: 14.04.487 

Cam Lock ”BIGGI” No. 604 

with special cam and handle 

and dust cover 

Item No.: 14.08.125 

Universal Cam Lock 

with double cam No. 145 

supplied with 2 different 

strikers 

Item No.: 14.04.630 

Cam Lock 1920 - 180° 

Flat Chrome Bright Face 

Ø24 mm x 3 mm 

Model 346 

94


Cam Lock with Tabular Key 

Extra Security 


Supplied in lenghts 17, 19, 

23, 25, 28 and 30 mm 

Tabular Push Lock Ø19 x 23 mm 

Cam Lock Model 311 

with special face 

Ø19 x 16, 20, 25 and 30 mm 

95


COIN DEPOSIT LOCK „MIC” 

with tubular interchangeable cylinder 

THE BEST SOLUTION FOR SAFE LOCKER STORAGE, FOR LOCKERS AT SWIMMING POOLS AND OTHER 

SPORT FACILITIES AND DIFFERENT CLUBS. 

All components are manufactures for use in wet or exposed areas. 

BLACK ABS housing – internal parts heavy duty corrosion resistant material i.e. zamak and with 7 pins solid 

brass cylinder. 

MINIMUM 2000 combinations, all to be opened with a white colour master key. 

INTERCHANGEABLE BARREL SYSTEM operated by a RED EXTRACTION KEY. 

Version 

10 DKK – Denmark 

2 PLN – Poland 

1 EURO – Euro-countries 

5 KUNA – Croatia 

1 LEVA – Bulgaria 

100 JPY – Japan 

25 

Please ask for other 

version (other coins) 

Right and left version 

available 

Supplied with 

2 keys (brass, nickelplated) 

1 coin collecting plate 

1 stricker indicating 

the coin type 

1 operation instruction 

92 

125 

18 

4 

Optional accessories 

Coin collecting box, white 

masterkey, red extraction 

key, bracelets. 

92 

110 

Item No.: 14.60.246 

etc. 

96

CONTENT - Siso Denmark

Create successful ePaper yourself

Delete template?

Save as template?