Title 55:V: Chapter 30 - Louisiana Office of State Fire Marshal

m. cylinder inspection light;
n. dry nitrogen cylinders, regulator and calibrated gauges for pressurizing cylinders;
o. supply of spare parts for respective manufacturers and type of fire extinguishers serviced;
p. proper wrenches with non-serrated jaws or valve puller (hydraulic or electric);
q. continuity tester and labels;
r. calibrated gauges and gauge tester;
s. working hydrostatic test pump for testing cylinders and fire hose, with flexible connection, check valves
and fittings;
t. adequate safety cage for hydrostatic testing of low pressure cylinders.
2. Fixed, Pre-Engineered or Kitchen Fire Suppression:
a. service, partial impairment (optional) and impairment tags;
b. installation tags;
c. six year maintenance and hydrostatic test labels;
d. external verification collars;
e. tamper seals (14 lbs. maximum breakage). The tamper seal shall reflect the current or previous calendar
year date when installed;
f. test apparatus including appropriate adapters, fittings and tools;
g. facilities for leak testing of pressurized cylinders;
h. approved equipment for drying cylinders;
i. approved closed recovery unit;
j. Department of Agriculture approved scales for unit measure. Scales shall be certified annually by the
Department of Agriculture or its designated agent;
k. appropriate recharge agents and fill funnels;
l. cylinder inspection light;
m. dry nitrogen cylinders, regulator and calibrated gauges for pressurizing cylinders;
n. supply of spare parts for respective manufacturers and type of systems serviced;
o. proper wrenches with non-serrated jaws or valve puller (hydraulic or electric);
p. wire cutters;
q. pipe threader;
r. pipe reamer;
s. flaring tools;
t. pipe wrenches;
u. calibrated gauges and gauge tester;
v. working hydrostatic test pump, with flexible connection, check valves and fittings;
w. adequate safety cage for hydrostatic testing of low pressure cylinders;
x. manometer (for engineered systems only);