THREAD CUTTING OIL CHLORINE-FREE - Emuge-Franken
THREAD CUTTING OIL CHLORINE-FREE - Emuge-Franken
THREAD CUTTING OIL CHLORINE-FREE - Emuge-Franken
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Thread Cutting Oil No. 3+ EMULSION<br />
chlorine-free<br />
Safety Information made in analogy to regulation (EC) No. 1907/2006 (REACH)<br />
SECTION 1: Identification of the substance/mixture and of the company/undertaking<br />
· 1.1 Product identifier<br />
· Trade name: EMUGE Thread Cutting Oil No. 3+ EMULSION<br />
· 1.2 Relevant identified uses of the substance or mixture and uses advised against<br />
No uses advised against identified.<br />
· Application of the substance / the preparation: Metal working<br />
· 1.3 Details of the supplier of the safety information<br />
· Manufacturer/Supplier:<br />
EMUGE-Werk Richard Glimpel GmbH & Co. KG<br />
EXPORT DIVISION<br />
Fabrik für Präzisionswerkzeuge<br />
Nürnberger Str. 96-100, 91207 Lauf, GERMANY<br />
Tel. +49 (0) 91 23 / 1 86-0, Fax +49 (0) 91 23 / 1 86-2 37<br />
· Informing department / Emergency telephone number:<br />
Martin Rittger, person responsible for safety Tel. +49 (0) 91 23 / 1 86-1 28 or -0<br />
martin.rittger@emuge.de<br />
Mon. - Thu. 7.00 - 15.00 h, Fri. 7.00 - 14.00 h<br />
SECTION 2: Hazards identification<br />
· 2.1 Classification of the substance or mixture<br />
· Classification according to Directive 67/548/EEC or Directive 1999/45/EC<br />
By handling of mineral oil products and chemical products no particular hazard is<br />
known when normal precautions (item 7) and personal protective equipment (item 8)<br />
are kept.<br />
The product is not classified according to Directive 67/548/EEC or Directive<br />
1999/45/EC<br />
Void<br />
· Information concerning particular hazards for human and environment:<br />
This product is water polluting; see item 12.<br />
The product does not have to be labelled due to the calculation procedure of the<br />
"General Classification guideline for preparations of the EU" in the latest valid<br />
version.<br />
· 2.2 Label elements<br />
· Labelling according to EU guidelines:<br />
Observe the normal safety regulations when handling chemicals or<br />
mineral oil products.<br />
The product is not subject to identification regulations under EC Directives until<br />
2008/1272/EC (1. CLP-ATP). Local regulations must be kept.<br />
· 2.3 Other hazards<br />
· Results of PBT and vPvB assessment<br />
· PBT: Not applicable.<br />
· vPvB: Not applicable.<br />
SECTION 3: Composition/information on ingredients<br />
· 3.2 Chemical characterization: Mixtures<br />
· Description: Mixture containing severely refined base oils and additives.<br />
Dangerous · components / Hazard communications / Concentration range %<br />
Polysulphide<br />
R53<br />
Polymer, ethoxylated<br />
Xi R36/38<br />
EINECS: 203-961-6 Glycol derivative<br />
Xi R36<br />
EINECS: 266-235-8 Oxazolidine Derivative<br />
C R34; Xn R21/22<br />
R52<br />
· Additional information<br />
For the wording of the listed risk phrases refer to section 16.<br />
10-15%<br />
10-15%<br />
1-2.4%<br />
1-2.4%<br />
Printing date: 15.05.2013 Revised at: 03.09.2012 Page 1 of 5
Change language