John Guest Fluid Products Catalog - Chester Paul Company

More documents

Recommendations

Info

Inch Brass Fittings Designed for use in coffee brewing equipment, beverage dispensing and vending machine applications. The fittings are manufactured in brass with a polypropylene collet and a food grade EPDM o-ring. Working Pressures and Temperatures Water Max. 150 psi at 70˚F (Max. 10 Bar at 20˚C) Max. 60 psi at 140˚F (Max. 4 Bar at 60˚C) Min. 33˚F / 1˚C Detailed technical information is shown on page 2. BRASS FLARE FEMALE CONNECTOR FFL THREAD BRASS FEMALE CONNECTOR (GARDEN HOSE) NH THREAD (National Hose) BRASS FEMALE CONNECTOR (GARDEN HOSE) NH THREAD (National Hose) PART NO. TUBE OD THREAD N.H. NC2258 3/8 x 3/4 - 11.5 NH PART NO. TUBE THREAD OD FFL MI4508F4S 1/4 x 1/4 MI4512F4S 3/8 x 1/4 MI4512F6S 3/8 x 3/8 1/4 (FFL) corresponds to a 7/16 - 20 UNF 3/8 (FFL) corresponds to a 5/8 - 18 UNF BRASS POLYPROPYLENE FEMALE CONNECTOR BSPP THREAD PART NO. TUBE THREAD OD BSPP NC2145 1/4 x 3/4 NC2249 3/8 x 3/4 PART NO. TUBE THREAD OD NH NC2098 1/4 x 3/4 - 11.5 NH A plug in elbow shown on page 5 will provide a neat 90° installation. The tube can be orientated in any direction. Metric to Inch Fittings UNION CONNECTOR Tube to Hose Stem TEE ADAPTER PART NO. TUBE TUBE OD OD NC462 15mm - 1/2” PART NO. STEM HOSE OD ID NC932 15mm - 1/2” PART NO. TUBE OD TUBE OD ENDS BRANCH NC869 15mm - 3/8" STEM TO TUBE ADAPTER BARB CONNECTOR STEM TO STEM ADAPTER PART NO. STEM TUBE OD OD NC2164 15mm - 3/8” NC2173 1/2” - 15mm NC908 1/2” - 18mm PART NO. STEM HOSE OD ID NC448 15mm - 1/2” PART NO. STEM STEM OD OD NC478 15mm - 3/8" 12
Inch Polypropylene Angle Stop Adapter Valves The PPSAV Range of inch-size Angle Stop Adapter Valves is offered in white polypropylene with food grade EPDM o-rings. Our Angle Stop Adapter Valve connects between your valve and riser, to the main water supply line, for applications in Reverse Osmosis, Filtration Systems, Automatic Coffee Brewers, Ice-makers, and many more. For use with other potable liquids, please refer to our Technical Support Department for guidance. The valves are not to be used with compressed air, explosive gases, petroleum spirits and other fuels, or for heating systems. FOR USE WITH COLD WATER SUPPLY ONLY. Working Pressures and Temperatures Water Max. 150 psi at 70˚F (10 bar at 20˚C) Max. 60 psi at 140˚F (4 bar at 60˚C) Min. 33˚F/1˚C ANGLE STOP ADAPTER VALVE New ANGLE STOP ADAPTER VALVE (conversion thread) Conversion Adapter Included* PART NO. THREAD MALE THREAD FEMALE TUBE COMPRESSION COMPRESSION OD ASVPP1 3/8" x 3/8" x 1/4" ASVPP2 3/8" x 3/8" x 3/8" PART NO. THREAD MALE THREAD TUBE FEMALE NPS COMPRESSION OD ASVPP5 1/2" x 3/8" x 1/4" ASVPP6 1/2" x 3/8" x 3/8" *Conversion Adapter can be threaded to either side of the valve to make configurations of 1/2"x1/2" NPS or 3/8"x3/8" Compression. How to connect the Angle Stop Adapter Valve 1 2 3 4 5 6 7 1. Shut off water supply at brass/chrome supply valve. 2. Disconnect riser from brass/chrome supply valve. 3. Ensure that the sealing gasket is fully seated into the Angle Stop Valve female thread. 4. Install Angle Stop Adapter Valve on supply valve. 5. Connect the riser to the Angle Stop Adapter Valve. 6. Fully insert tubing into the Speedfit ® side of the valve. 7. Open valves and check for leaks. 13
Page 1 and 2: Fluid System Products Fittings, Val
Page 3 and 4: Table of Contents for Industrial Pr
Page 5 and 6: How to make a John Guest Connection
Page 7 and 8: SWIVEL MALE RUN TEE NPTF THREAD PLU
Page 9 and 10: STEM ADAPTER BSPT THREAD SWIVEL ELB
Page 11 and 12: FAUCET CONNECTOR BSPP THREAD FEMALE
Page 13: Inch Superseal Fittings For use wit
Page 17 and 18: CTS Size Plastic Half Cartridges Jo
Page 19 and 20: Half Cartridges Cartridge Assembly
Page 21 and 22: Metric Polypropylene Fittings The P
Page 23 and 24: REDUCER SWIVEL ELBOW BSPP THREAD SW
Page 25 and 26: Inch/Metric Accessories COLLET COVE
Page 27 and 28: CHEMICAL PM/PI RANGE CM/CI RANGE PP
Page 29 and 30: Table of Contents for Speedfit Inch
Page 31 and 32: CTS SIZES TO DISCONNECT: Ensure tha
Page 33 and 34: TECHNICAL CHECKLIST INCH SIZE PLUMB
Page 35 and 36: CTS SIZES Stackable Tee Part No. Si
Page 37 and 38: CTS SIZES Products on this page are
Page 39 and 40: Table of Contents for Speedfit Metr
Page 41 and 42: METRIC SIZES METRIC PLUMBING FITTIN
Page 43 and 44: BRASS FITTINGS Brass Male Connector
Page 45 and 46: Part Number Found On Page(s) 1/4SCV
Page 47 and 48: John Guest USA, Inc. Terms & Condit

John Guest Fluid Products Catalog - Chester Paul Company

Create successful ePaper yourself

Delete template?

Save as template?