John Guest Fluid Products Catalog - Chester Paul Company

Fluid System Products 

Fittings, Valves, Tubing 

Industrial Division Catalog 

John Guest USA, Inc. 

May 2008

INNOVATION FROM A WORLD LEADER 

As the world’s leading manufacturer of push-in pipe fittings, 

John Guest has been pioneering revolutionary plastics 

manufacturing technologies since the early 1970’s. 

Over the past 30 years, the company has established a 

worldwide reputation for product quality and service. John 

Guest’s precision engineering background and highly trained 

specialist workforce uniquely places the company as one that 

manufactures to the most stringent international standards. 

Our long-standing commitment to product innovation and 

development has resulted in a comprehensive range of awardwinning 

fittings with substantial benefits for specifier, installer, 

and end user alike. 

With production currently running at more than 150 million 

units per year, the success of the JG Speedfit ® system proves 

the value of these benefits in practice. In addition to plumbing 

applications, John Guest fittings are specified as original 

equipment by many leading building products manufacturers 

and used extensively by market leaders in the water quality, 

automotive, compressed air, and brewing industries. 

Quality components depend on quality machines and highly 

skilled staff. John Guest has both in abundance. A policy of 

re-investment in leading edge technologies has equipped 

the company with an advanced large-scale manufacturing 

capability which incorporates highly sophisticated process 

controls. 

From the beginning, the company’s philosophy has been to 

employ the most capable people and to give them the best 

possible training. There are 1000 staff at the manufacturing 

facilities in the United Kingdom; another 200 people are 

located at John Guest companies in the USA, Korea, Germany, 

France, Spain, Italy, New Zealand, and Australia. 

FOCUS ON RESEARCH AND DEVELOPMENT 

As befits a company 

committed to innovation, 

more than 10% 

of the John Guest 

workforce is dedicated 

to research and 

development. 

In addition to on-site 

resources which include 

the latest CAD/ 

CAM technologies, extensive development work on a variety 

of projects is carried out in close conjunction with renowned 

universities both in the United Kingdom and abroad. 

EXCELLENCE IN MANUFACTURING 

ASSURED QUALITY 

Investment in new plant and 

equipment over recent years 

has made John Guest’s manufacturing 

center one of the largest 

and best equipped of its 

kind in the world. High-capacity 

injection molding machines and 

assembly equipment are supported 

by an in-house tool-room 

staffed by a highly trained team 

of qualified toolmakers. 

Every aspect of the company’s operation is characterized by 

the pursuit of total quality. Zero defect process controls are 

built into all design and manufacturing assembly processes to 

achieve optimum standards of long-term product reliability. 

John Guest has been 

a BS EN ISO 9001 

Registered Company 

since 1989 and has 

received awards and 

approvals for quality 

manufacture from 

many leading international 

companies 

and approvals organizations.

Table of Contents for Industrial Products 

For Speedfit Inch Products refer to Table of Contents page 27 

For Speedfit Metric Products refer to Table of Contents page 37 

Inch Size Fittings 

PP Fittings White Polypropylene for use with a wide range of applications 4-5 

PI Fittings Gray Acetal for liquids and inert gases 6-9 

CI Fittings White Acetal for pure water and other potable liquids 10 

Superseal Fittings Gray Acetal for use with stainless steel tube 11 

MI Fittings Brass Fittings for beverage dispensing applications 12 

Metric to Inch Size Fittings 

Metric to Inch Fittings Converts metric sizes to inch and inch to metric 12 

Industrial Products 

Metric Size Fittings 

PPM Fittings White Polypropylene for use with a wide range of applications 19 

PM Fittings Black Acetal for liquids and inert gases 20-22 

Valves, LLDPE Tubing and Accessories 

Check Valves Single Check Valves in inch sizes 9 

Angle Stop Adapter Valves White Polypropylene in inch sizes 13 

Angle Tee Adapter Valves White Acetal in metric to inch sizes 14 

Shut-Off Valves White Polypropylene and Gray Acetal 14 

LLDPE Tubing Linear Low Density Polyethylene in Inch and metric sizes 18 

Accessories Collet Covers, Tube Inserts, Clips, Tools 23 

and Cutters (inch and metic sizes) 

Half Cartridges 

Plastic Cartridges Inch CTS Sizes 15 

Inch & Metric O.D. Sizes 16-17 

Metal Cartridges Inch & Metric O.D. Sizes 16-17 

Other 

Technical Specifications 2 

How to Make a John Guest Connection 3 

Chemical Compatibility Chart 24-25 

Index 43-44 

1

2 

Technical Specifications 

Working Pressure and Temperature 

Range for Acetal Fittings (PI, SI, SM 

and PM). 

Super Speedfit ® fittings are suitable for the following 

pressures and temperatures. 

Temp. 

Pressure 

5/32” - 5/16” 3/8” -1/2” 

4mm - 8mm 10mm - 22mm 

Air 

- 4˚F 230 psi 150 psi 

- 20˚C (16 Bar) (10 Bar) 

Potable Liquids and Air 

+33˚F 230 psi 150 psi 

+1˚C (16 Bar) (10 Bar) 

+73˚F 230 psi 150 psi 

+23˚C (16 Bar) (10 Bar) 

+158˚F 150 psi 100 psi 

+70˚C (10 Bar) (7 Bar) 

Also suitable for vacuum 

For Polypropylene Working Pressure and Temperature 

Range, please refer to page 4. 

Depending on the tube used, under certain conditions 

fittings may be used at higher pressures and temperatures. 

Please refer to our Technical Support Department 

for guidance. Note 1 Bar = 14.5 PSIG. 

Tube Types 

Plastic Tube - Polyethylene, nylon and polyurethane 

conforming to the tolerances shown below. For soft 

tubing or thin wall tube we recommend the use of tube 

inserts. 

Braided Tube - Use of Tube to Hose Stems listed on 

page 8 is essential when using braided tube or hose. 

The use of clamps to retain braided tube on barbs is 

recommended. 

Metal Tube (soft) - Brass, copper or mild steel conforming 

to the tolerances below. 

Metal Tube (hard) - We do not recommend Super 

Speedfit fittings for hard metal or chrome plated tubes. 

For stainless steel and other polished metal tubes we 

recommend the use of Superseal fittings. These are 

shown on page 11 of this catalog. 

It is essential that outside diameters be free from 

score marks and that the tube be deburred before 

inserting the fitting. 

Tube Tolerances 

Super Speedfit ® fittings are offered for tubes with outside 

diameters to the following tolerances. 

Size (inches) 5/32 - 3/16 1/4 - 1/2 

Tolerance 

(inches) 

+0.001 / -0.003 +0.001 / -0.004 

Size (mm) 4mm - 5mm 6mm - 22mm 

Tolerance (mm) +0.05 / -0.07 +0.05 / -0.10 

Installation and System Testing 

Fittings and tube should be kept clean and undamaged 

before use. 

All tube and fittings installations must be pressure 

tested after installation to ensure system integrity before 

handing over to the final user. Refer to “How to make a 

connection” on inside front cover. 

Chemicals 

For use with chemicals or other potentially aggressive 

liquids, please refer to our Chemical Compatibility Chart 

shown on pages 24 and 25, or contact our Technical 

Support Department. 

Super Speedfit fittings are not recommended for use 

with explosive gases, petroleum spirits, and other fuels 

or for central heating systems. 

Collet Covers 

Are available as additional security against removal of 

the tube or to provide a simple means of color coding. 

The cover is offered in a range of six colors. Please see 

page 23 of this catalog. 

Food Quality 

All the fittings in this catalog are produced in Food and 

Drug Administration (FDA) approved materials and are 

therefore recommended for food quality applications. 

The wetted surfaces of John Guest PI, PM, SI, CI, PP and 

NC plastic fittings, PPSV and PISV Valves, and PE Tubing 

are in compliance with FDA requirements for direct contact 

with food as detailed in 21CFR part 177.2470 for the 

body and 177.2600 for the o-ring. 

NSF International Standard 51 and 61. 

Maximum Torque Values for Plastic 

Threads BSP, BSPT & NPT. 

Do not overtighten plastic threaded fittings as this could 

cause undue stress and eventual failure. Maximum recommended 

torque figures are shown below. 

Maximum 

Torque 

Threads 

1/8” - 1/4” 3/8” - 1/2” 3/4” 

1.0ft lbs 2.2ft lbs 2.9ft lbs 

1.5Nm 3.0Nm 4.0Nm 

John Guest recommends that OEM customers consider 

replacing threaded ports with the more modern 

Cartridge Systems. 

It is recommended that all installations are checked prior 

to use to determine that a seal has been made. 

The maximum torque figures quoted for use with 

Speedfit fittings are dependent on the mating thread 

conforming to the relevent U.S., British or International 

thread standard. 

Maintenance and Replacement 

Intervals 

John Guest products generally require little maintenance 

but as a minimum we recommend routine visual 

inspection. Frequency of visual inspection will depend 

on severity of application and risk of failure. If after 

visual inspection John Guest products appear damaged, 

cracked, charred, discolored, heat distorted or corroded, 

they should be replaced. Any product that is or appears 

to be leaking should be replaced. 

Product life is affected by the severity of the application, 

the hostility of the working environment and contact with 

aggressive chemicals or liquids. It is therefore important 

that specific replacement intervals be considered by 

specifiers/users/customers based on previous service life 

or when failure could result in unacceptable downtime, 

damage or injury risk. 

Cleaners and Sanitizing of Acetal 

Fittings 

Our advice to customers is to use cleaners and sanitizing 

agents that are above pH4 and low in hypochlorite level. 

Acetal fittings and parts that are cleaned and/or sanitized 

should be rinsed immediately with copious amounts of 

clean, neutral tap water to remove all traces of the cleaners. 

Details of which products are made from acetal are 

shown in our catalog but generally John Guest products 

incorporating acetal are designated by the part number 

prefix PI, PM, CI, CM and RM. Polypropylene fittings offer 

greater resistance to aggressive chemicals than acetal 

fittings. Polypropylene does not have the same mechanical 

properties as acetal and John Guest polypropylene 

fittings are generally designated by the part number 

prefix PP, PPSV and PPASV. 

Our material suppliers recommend ECOLAB Oasis 133 

as a suitable external cleaner for acetal products manufactured 

by John Guest. 

Responsibility of Use 

While we give a warranty against defects in manufacture 

or materials, it is the responsibility of the user/installer 

to ensure that fittings and related products are suitable 

for their application. The installation must be carried 

out correctly in accordance with our recommendations, 

complying with recognized codes of practice and relevant 

national standards, and be properly maintained. 

Please refer to our terms and conditions of sale. 

Product Selection and Installation 

John Guest fittings and related products are specifically 

designed and manufactured by John Guest to the 

Technical Specifications set out in the John Guest 

Product Catalog. All John Guest fittings and related products 

should be selected, installed, used and maintained 

in accordance with these Technical Specifications. It 

is the customer’s/user’s responsibility to ensure that 

John Guest fittings and related products are suitable for 

their intended applications, and are properly installed 

and maintained and are used in accordance with the 

Technical Specifications. It is also the customer’s/user’s 

responsibility to provide its customers with any relevant 

technical information about John Guest products it supplies 

them. 

The company has a policy of continuous research and 

development and reserves the right to amend without 

notice the specification and design of all products illustrated 

in this catalog. John Guest reserves the right to 

change the color and shape of products. Photographs are 

for illustration purposes only. 

Subject to our Terms and Conditions of Sale shown on 

page 45. 

John Guest USA, Inc. is not responsible for misprints or 

typographical errors.

How to make a 

John Guest Connection 

To make a connection, the tube is simply pushed in by hand; the 

unique patented John Guest collet locking system then holds the 

tube firmly in place without deforming it or restricting flow. 

Materials of Construction 

John Guest Fittings are made up of three 

components: 

Bodies are produced in acetal copolymer or 

polypropylene. 

O-rings are produced in nitrile or EPDM. 

Collets are produced in acetal copolymer or 

polypropylene with stainless steel teeth. 

How to make a connection 

Cut the Tube Square 

O-ring provides a 

leakproof seal 

Grips before it seals 

The Collet (gripper) has 

stainless steel teeth 

which hold the tube 

firmly in position whille 

the o-ring provides a 

permanent leakproof seal. 

Collet 

Cut the tube square and remove burrs 

and sharp edges. Ensure that the outside 

diameter is free from score marks. For soft 

or thin-walled plastic tubing we recommend 

the use of a tube insert. 

Stainless Steel teeth 

grip the pipe. 

Push up to tube stop 

To disconnect 

Push in collet and remove pipe 

Push the pipe into the fitting and up to the tube stop. 

Pull to check secure 

To disconnect, ensure that the system is 

depressurized, push the collet square against 

the fitting. With the collet held in this position 

the tube can be removed. 

Pull on the tube to check that it is secure. 

Test the system before use. 

3

Inch Polypropylene Fittings 

The PP Range of inch-size push-in fittings is offered for tube sizes 1/4" O.D. to 

1/2" O.D. The fittings are manufactured in white polypropylene with food grade 

EPDM o-rings. They have been developed to satisfy the compatibility needs for a 

wide range of applications. 

Working Pressures and Temperatures 

Water Max. 150 psi at 70˚F (Max. 10 Bar at 20˚C) 

Max. 60 psi at 140˚F (Max. 4 Bar at 60˚C) 

Min. 33˚F/1˚C 

Detailed technical information is shown on page 2. 

MALE CONNECTOR 

NPTF THREAD 

UNION CONNECTOR 

PLUG 

PART NO. TUBE THREAD 

OD NPTF 

PP010821W 1/4 - 1/8 

PP010822W 1/4 - 1/4 

PP010823W 1/4 - 3/8 

PP011222W 3/8 - 1/4 

PP011223W 3/8 - 3/8 

PP011224W 3/8 - 1/2 

PP011623W 1/2 - 3/8 

PP011624W 1/2 - 1/2 

PART NO. 

TUBE 

OD 

PP0408W 1/4 

PPM0408W 5/16 

PP0412W 3/8 

PP0416W 1/2 

PART NO. 

STEM 

OD 

PP0808W 1/4 

PPM0808W 5/16 

PP0812W 3/8 

PP0816W 1/2 

SWIVEL ELBOW 

NPTF THREAD 

STEM ADAPTER 

NPTF THREAD 

UNION TEE 

PART NO. STEM THREAD 

OD NPTF 


OD NPTF 

PART NO. 

TUBE 

OD 

PP0208W 1/4 

PPM0208W 5/16 

PP0212W 3/8 

PP0216W 1/2 

PP050821W 1/4 x 1/8 

PP050822W 1/4 x 1/4 

PP051222W 3/8 x 1/4 

PP051223W 3/8 x 3/8 

PP051623W 1/2 x 3/8 

PP051624W 1/2 x 1/2 

PP090821W 1/4 x 1/8 

PP090822W 1/4 x 1/4 

PP091222W 3/8 x 1/4 

PP091223W 3/8 x 3/8 

SWIVEL BRANCH TEE 

CENTER LEG 

NPTF THREAD 

UNION ELBOW 

REDUCER 

PART NO. 

TUBE 

OD 

PP0308W 1/4 

PPM0308W 5/16 

PP0312W 3/8 

PP0316W 1/2 

New 

New 

PART NO. STEM TUBE 

OD OD 

PP061208W 3/8 - 1/4 

PP061612W 1/2 - 3/8 

PP062008W 5/8 - 1/4 

PP062012W 5/8 - 3/8 

PP062016W 5/8 - 1/2 


OD NPTF 

PP100821W 1/4 x 1/8 

PP100822W 1/4 x 1/4 

PP101222W 3/8 x 1/4 

PP101223W 3/8 x 3/8 

4

SWIVEL MALE RUN TEE 

NPTF THREAD 

PLUG IN ELBOW 

FAUCET CONNECTOR UNS THREAD 


OD NPTF 


OD OD 


OD 

UNS 

PP110821W 1/4 x 1/8 

PP110822W 1/4 x 1/4 

PP111222W 3/8 x 1/4 

PP111223W 3/8 x 3/8 

PP220808W 1/4 - 1/4 

PPM220808W 5/16 - 5/16 

PP221208W 3/8 - 1/4 

PP221212W 3/8 - 3/8 

PP221616W 1/2 - 1/2 

PP3208U7W 1/4 x 7/16 - 24 

PP3212U7W 3/8 x 7/16 - 24 

BULKHEAD UNION 

TWO WAY DIVIDER 

FEMALE ADAPTER 

NPTF THREAD 

PART NO. TUBE Mounting 

OD Hole Dia. 

PP1208W 1/4 0.67 

PP1212W 3/8 0.83 

PP1216W 1/2 1.06 

Polypropylene Bulkhead Unions are 

not intended for submerged use. 

REDUCING BULKHEAD UNION 

PART NO. 

TUBE 

OD 

PP2312W 3/8 


OD NPTF 

PP450821W 1/4 x 1/8 

PP450822W 1/4 x 1/4 

PP451222W 3/8 x 1/4 

PP451223W 3/8 x 3/8 

PART NO. TUBE TUBE Mounting 

OD OD Hole Dia. 

TUBE TO HOSE STEM 

FIXED ELBOW 

NPTF THREAD 

PP121208W 3/8 - 1/4 0.83 

PART NO. STEM HOSE 

OD ID 

REDUCING UNION CONNECTOR 

PART NO. TUBE TUBE 

OD OD 

PP251212W 3/8 - 3/8 

PP251216W 3/8 - 1/2 

PP251612W 1/2 - 3/8 

PP251616W 1/2 - 1/2 


OD NPTF 

PP480821W 1/4 x 1/8 

PP480822W 1/4 x 1/4 

PP480823W 1/4 x 3/8 

PP481222W 3/8 x 1/4 

PP481223W 3/8 x 3/8 

PP201208W 3/8 - 1/4 

PP201612W 1/2 - 3/8 

REDUCING TEE 

REDUCING ELBOW 

PART NO. TUBE OD TUBE OD TUBE OD 

END END BRANCH 


OD OD 

PP211008W 5/16 - 1/4 

PP211208W 3/8 - 1/4 

PP211612W 1/2 - 3/8 

PP30120812W 3/8 x 1/4 x 3/8 

PP30121208W 3/8 x 3/8 x 1/4 

PP301612W 1/2 x 1/2 x 3/8 

Accessories for PP Fittings 

are shown on page 23. 

5

Inch Acetal Fittings 

The PI Range of inch-size push-in fittings is offered for tube sizes 5/32" O.D. to 

5/8" O.D. The fittings are manufactured in gray acetal copolymer with food grade 

nitrile o-ring, making them especially suitable for applications involving foodstuff 

and potable liquids. They are especially suitable for air and inert gases and can 

therefore be used on CO 2 lines, pneumatic applications and vacuum. 


MALE CONNECTOR NPTF THREAD 

MALE CONNECTOR BSPP THREAD 

UNION ELBOW 


OD NPTF 


OD BSPP 

PART NO. 

TUBE 

OD 

PM010421S 5/32 x 1/8 

PM010422S 5/32 x 1/4 

PI010621S 3/16 x 1/8 

PI010821S 1/4 x 1/8 

PI010822S 1/4 x 1/4 

PI010823S 1/4 x 3/8 

PM010821S 5/16 x 1/8 

PM010822S 5/16 x 1/4 

PM010823S 5/16 x 3/8 

PI011221S 3/8 x 1/8 

PI011222S 3/8 x 1/4 

PI011223S 3/8 x 3/8 

PI011224S 3/8 x 1/2 

PI011623S 1/2 x 3/8 

PI011624S 1/2 x 1/2 

PI012026S 5/8 x 3/4 

NCPI011211S 3/8 x 1/8 

NCPI011212S 3/8 x 1/4 

3/8" x 1/4" has special large seal 

for use with chamfered face ports. 

No thread seal on 3/8" x 1/8". 

FLARE MALE CONNECTOR MFL THREAD 

45˚ FLARE 

PM0304S 5/32 

PI0306S 3/16 

PI0308S 1/4 

PM0308S 5/16 

PI0312S 3/8 

PI0316S 1/2 


MALE CONNECTOR BSPT THREAD 


OD BSPT 

PM010401S 5/32 x 1/8 

PM010402S 5/32 x 1/4 

PI010601S 3/16 x 1/8 

PI010602S 3/16 x 1/4 

PI010801S 1/4 x 1/8 

PI010802S 1/4 x 1/4 

PM010801S 5/16 x 1/8 

PM010802S 5/16 x 1/4 

PM010803S 5/16 x 3/8 

PI011202S 3/8 x 1/4 

PI011203S 3/8 x 3/8 

PI011603S 1/2 x 3/8 

PI011604S 1/2 x 1/2 

MALE CONNECTOR BSPP THREAD 


OD BSPP 

PI010812S 1/4 x 1/4 

PI011212S 3/8 x 1/4 


OD MFL 

PI0108F4S 1/4 x 1/4 

PM0108F5S 5/16 x 5/16 

PI0112F4S 3/8 x 1/4 

PI0112F5S 3/8 x 5/16 

PI0112F6S 3/8 x 3/8 

PI0112F8S 3/8 x 1/2 

PI0116F8S 1/2 x 1/2 

PM0108C5S 5/16 x 1/2 - 16UN 

PI0112C5S 3/8 x 1/2 - 16UN 

1/4" (MFL) corresponds to a 7/16-20 UNF 




UNION TEE 

PART NO. 

TUBE 

OD 

PM0204S 5/32 

PI0206S 3/16 

PI0208S 1/4 

PM0208S 5/16 

PI0212S 3/8 

PI0216S 1/2 

PART NO. 

TUBE 

OD 

PM0404S 5/32 

PI0406S 3/16 

PI0408S 1/4 

PM0408S 5/16 

PI0412S 3/8 

PI0416S 1/2 

STEM ADAPTER 


OD NPTF 

PM050421S 5/32 x 1/8 

PM050422S 5/32 x 1/4 

PI050621S 3/16 x 1/8 

PI050821S 1/4 x 1/8 

PI050822S 1/4 x 1/4 

PI050823S 1/4 x 3/8 

PM050821S 5/16 x 1/8 

PM050822S 5/16 x 1/4 

PM050823S 5/16 x 3/8 

PI051222S 3/8 x 1/4 

PI051223S 3/8 x 3/8 

PI051623S 1/2 x 3/8 

PI051624S 1/2 x 1/2 

NPTF THREAD 

6

STEM ADAPTER 

BSPT THREAD 

SWIVEL ELBOW 

NPTF THREAD 

SWIVEL BRANCH TEE CENTER LEG 

BSPT THREAD 


OD BSPT 

PM050401S 5/32 x 1/8 

PM050402S 5/32 x 1/4 

PI050601S 3/16 x 1/8 

PI050801S 1/4 x 1/8 

PI050802S 1/4 x 1/4 

PM050801S 5/16 x 1/8 

PM050802S 5/16 x 1/4 

PM050803S 5/16 x 3/8 

PI051202S 3/8 x 1/4 

PI051203S 3/8 x 3/8 

PI051603S 1/2 x 3/8 

PI051604S 1/2 x 1/2 

STEM ADAPTER 

BSPP THREAD 


OD NPTF 

PM090421S 5/32 x 1/8 

PM090422S 5/32 x 1/4 

PI090621S 3/16 x 1/8 

PI090821S 1/4 x 1/8 

PI090822S 1/4 x 1/4 

PM090821S 5/16 x 1/8 

PM090822S 5/16 x 1/4 

PM090823S 5/16 x 3/8 

PI091221S 3/8 x 1/8 

PI091222S 3/8 x 1/4 

PI091223S 3/8 x 3/8 

PI091622S 1/2 x 1/4 

PI091623S 1/2 x 3/8 

PI091624S 1/2 x 1/2 


OD BSPT 

PI100601S 3/16 x 1/8 

PI100801S 1/4 x 1/8 

PI100802S 1/4 x 1/4 

PM100801S 5/16 x 1/8 

PM100802S 5/16 x 1/4 

PM100803S 5/16 x 3/8 

PI101202S 3/8 x 1/4 

PI101203S 3/8 x 3/8 

PI101603S 1/2 x 3/8 

PI101604S 1/2 x 1/2 

SWIVEL ELBOW 

BSPT THREAD 

SWIVEL MALE RUN TEE NPTF THREAD 


OD BSPP 

PM050812S 5/16 x 1/4 

PI051212S 3/8 x 1/4 

PI051213S 3/8 x 3/8 

REDUCER 


OD OD 

PI060605S 3/16 - 5/32 

PI061006S 5/16 - 3/16 

PI061008S 5/16 - 1/4 

PI061206S 3/8 - 3/16 

PI061208S 3/8 - 1/4 

PI061210S 3/8 - 5/16 

PI061610S 1/2 - 5/16 

PI061612S 1/2 - 3/8 


OD BSPT 

PI090601S 3/16 x 1/8 

PI090801S 1/4 x 1/8 

PI090802S 1/4 x 1/4 

PM090801S 5/16 x 1/8 

PM090802S 5/16 x 1/4 

PM090803S 5/16 x 3/8 

PI091202S 3/8 x 1/4 

PI091203S 3/8 x 3/8 

PI091603S 1/2 x 3/8 

PI091604S 1/2 x 1/2 

SWIVEL BRANCH TEE CENTER LEG 

NPTF THREAD 


OD NPTF 

PM110421S 5/32 x 1/8 

PM110422S 5/32 x 1/4 

PI110621S 3/16 x 1/8 

PI110821S 1/4 x 1/8 

PI110822S 1/4 x 1/4 

PM110821S 5/16 x 1/8 

PM110822S 5/16 x 1/4 

PM110823S 5/16 x 3/8 

PI111222S 3/8 x 1/4 

PI111223S 3/8 x 3/8 

PI111623S 1/2 x 3/8 

PI111624S 1/2 x 1/2 

SWIVEL MALE RUN TEE BSPT THREAD 

PLUG 


OD NPTF 


OD BSPT 

PART NO. 

STEM 

OD 

PM0804S 5/32 

PI0806S 3/16 

PI0808S 1/4 

PM0808S 5/16 

PI0812S 3/8 

PI0816S 1/2 

PM100421S 5/32 x 1/8 

PM100422S 5/32 x 1/4 

PI100621S 3/16 x 1/8 

PI100821S 1/4 x 1/8 

PI100822S 1/4 x 1/4 

PM100821S 5/16 x 1/8 

PM100822S 5/16 x 1/4 

PM100823S 5/16 x 3/8 

PI101222S 3/8 x 1/4 

PI101223S 3/8 x 3/8 

PI101623S 1/2 x 3/8 

PI101624S 1/2 x 1/2 

PI110601S 3/16 x 1/8 

PI110801S 1/4 x 1/8 

PI110802S 1/4 x 1/4 

PM110801S 5/16 x 1/8 

PM110802S 5/16 x 1/4 

PM110803S 5/16 x 3/8 

PI111202S 3/8 x 1/4 

PI111203S 3/8 x 3/8 

PI111603S 1/2 x 3/8 

PI111604S 1/2 x 1/2 

John Guest Adaptability 

Standard Super Speedfit products 

can be coupled together to form integral 

new fittings. 

+ = 

+ = 

+ = 

7



PART NO. TUBE MOUNTING HOLE 

OD 

DIA. (INCH) 

PM1204S 5/32 0.67 

PI1206S 3/16 0.67 

PI1208S 1/4 0.67 

PM1208S 5/16 0.83 

PI1212S 3/8 0.83 

PI1216S 1/2 1.06 



OD OD 

PM210804S 5/16 - 5/32 

PI211006S 5/16 - 3/16 

PI211008S 5/16 - 1/4 

PI211206S 3/8 - 3/16 

PI211208S 3/8 - 1/4 

PI211210S 3/8 - 5/16 

PI211610S 1/2 - 5/16 

PI211612S 1/2 - 3/8 


OD ID 

PI250806S 1/4 - 3/16 

PI250808S 1/4 - 1/4 

PI250810S 1/4 - 5/16 

PI251006S 5/16 - 3/16 

PI251008S 5/16 - 1/4 

PM250808S 5/16 - 5/16 

PI251012S 5/16 - 3/8 

PI251208S 3/8 - 1/4 

PI251210S 3/8 - 5/16 

PI251212S 3/8 - 3/8 

PI251216S 3/8 - 1/2 

PI251612S 1/2 - 3/8 

PI251616S 1/2 - 1/2 

TUBE TO HOSE STEM LONG VERSION 

REDUCING BULKHEAD UNION 

PLUG IN ELBOW 


OD ID 

PART NO. TUBE TUBE MOUNTING HOLE 

OD OD DIA. (INCH) 

NC392-02 1/2 - 1/4 0.83 

PI121208S 3/8 - 1/4 0.83 

ENLARGER 


OD OD 

PI131012S 5/16 - 3/8 

PI131216S 3/8 - 1/2 


OD OD 

PM220404S 5/32 - 5/32 

PI220606S 3/16 - 3/16 

PI220808S 1/4 - 1/4 

PM220808S 5/16 - 5/16 

PI221206S 3/8 - 3/16 

PI221208S 3/8 - 1/4 

PI221210S 3/8 - 5/16 

PI221212S 3/8 - 3/8 

PI221616S 1/2 - 1/2 

TWO-WAY DIVIDER 

PI251012SL 5/16 - 3/8 

PI251212SL 3/8 - 3/8 

TUBE TO HOSE ELBOW 


OD ID 

PI290808S 1/4 - 1/4 

PI290810S 1/4 - 5/16 

PI291008S 5/16 - 1/4 

PM290808S 5/16 - 5/16 

PI291208S 3/8 - 1/4 

PI291210S 3/8 - 5/16 

PART NO. 

TUBE 

OD 

REDUCING TEE 

REDUCING UNION CONNECTOR 


OD OD 

PI200806S 1/4 - 3/16 

PM200804S 5/16 - 5/32 

PI201006S 5/16 - 3/16 

PI201008S 5/16 - 1/4 

PI201206S 3/8 - 3/16 

PI201208S 3/8 - 1/4 

PI201210S 3/8 - 5/16 

PI201610S 1/2 - 5/16 

PI201612S 1/2 - 3/8 

PI2308S 1/4 

PM2308S 5/16 

PI2312S 3/8 

PI2316S 1/2 

UNEQUAL TWO-WAY DIVIDER 

PART NO. TUBE OD TUBE OD 

INLET OUTLET 

PI241210S 3/8 - 5/16 


ENDS BRANCH 

PI301208S 3/8 - 1/4 

PI301612S 1/2 - 3/8 

Accessories for PI Fittings 


8

FAUCET CONNECTOR BSPP THREAD 

FEMALE CONNECTOR BSPP THREAD - 

CONE END 

THREE WAY DIVIDER 


OD BSPP 

CI320814S 1/4 x 1/2 

CI321214S 3/8 x 1/2 

FAUCET CONNECTOR UNS THREAD 


OD BSPP 

PI451014CS 5/16 x 1/2 

PI451015CS 5/16 x 5/8 

PI451214CS 3/8 x 1/2 

PI451215CS 3/8 x 5/8 

PI451614CS 1/2 x 1/2 

PI451615CS 1/2 x 5/8 


INLET OUTLET 

PI491612S 1/2 - 3/8 

DISPENSING VALVE ELBOW 


OD UNS 

CI3208U7S 1/4 x 7/16 - 24 

CI3210U7S 5/16 x 7/16 - 24 

CI3212U7S 3/8 x 7/16 - 24 

FEMALE CONNECTOR NPTF THREAD 

FEMALE CONNECTOR BSPP THREAD - 

FLAT END 


OD BSPP 

PI451014FS 5/16 x 1/2 

PI451015FS 5/16 x 5/8 

PI451213S 3/8 x 3/8 

PI451214FS 3/8 x 1/2 

PI451215FS 3/8 x 5/8 

PI451613S 1/2 x 3/8 

PI451615FS 1/2 x 5/8 

PART NO. TUBE STEM 

OD OD 

NC356-02 3/8 - 3/8 

DISPENSING VALVE STEM 

PART NO. 

STEM 

OD 

NC730-02 3/8 

OFFSET CONNECTOR 


OD NPTF 

END STOP 

PI450822S 1/4 x 1/4 

PI451222S 3/8 x 1/4 

FEMALE CONNECTOR UN THREAD 

PART NO. 

CROSS 

TUBE 

OD 

PI4608S 1/4 

PI4612S 3/8 


OD OD 

NC641 1/2 - 5/16 

U-BEND 


OD 

UN 

PART NO. 

TUBE 

OD 

PM4508C5S 5/16 x 1/2 - 16 

PI4512C5S 3/8 x 1/2 - 16 

PI4516C5S 1/2 x 1/2 - 16 

FEMALE FLARE CONNECTOR 

FFL 

THREAD 

PART NO. 

TUBE 

OD 

PI4712S 3/8 

FIXED ELBOW 

NPTF THREAD 

PIUB12S 3/8 

PIUB16S 1/2 

The U-Bend is offered for 1/2 inch OD 

tube sizes. Existing 1/2 inch ID lines 

can be accommodated by using a 

standard Tube to Hose Stem. 

CHECK VALVE 

45˚ FLARE 

Super Speedfit Single Check 

Valves allow flow in one 

direction. 


OD FFL 


OD NPTF 

For liquids only 

PM4508F4S 5/16 x 1/4 

PI4512F4S 3/8 x 1/4 

PI4512F6S 3/8 x 3/8 

1/4 (FFL) corresponds to a 7/16 - 20 UNF 


PI480821S 1/4 x 1/8 

PI480822S 1/4 x 1/4 

PI480823S 1/4 x 3/8 

PI481222S 3/8 x 1/4 

PI481223S 3/8 x 3/8 

PI482024S 5/8 x 1/2 

PART NO. 

TUBE 

OD 

1/4SCV 1/4 

5/16SCV 5/16 

3/8SCV 3/8 

NSF 51 

NSF 61 

9

Inch Acetal Fittings (White) 

The CI range of inch-size fittings is offered for tube sizes 1/4" O.D. and 3/8" O.D. 

The fittings are manufactured in white acetal, with a food grade EPDM o-ring. They 

have been developed for the water industry but are equally suitable for other potable 

liquids. They are also recommended for intermittent hot water applications. 

Selected items are available with red or blue collets. 

The CI Range is NOT suitable for compressed air applications. For these situations 

we recommend the PI Range on pages 6 - 9. 


Water Max. 150 psi at 70˚F (Max. 10 bar at 20˚C) 

Max. 100 psi at 150˚F (Max. 7 bar at 65˚C) 

Min. 33˚F/1˚C 


MALE CONNECTOR NPTF THREAD 

STEM ADAPTER 

NPTF THREAD 

PLUG IN ELBOW 


OD NPTF 

CI010821W 1/4 x 1/8 

CI010822W 1/4 x 1/4 

CI010823W 1/4 x 3/8 

CI011222W 3/8 x 1/4 

UNION TEE 


OD NPTF 

CI050821W 1/4 x 1/8 

CI050822W 1/4 x 1/4 

CI051222W 3/8 x 1/4 

CI051223W 3/8 x 3/8 

REDUCER 


OD OD 

CI220808W 1/4 - 1/4 

CI221208W 3/8 - 1/4 

CI221212W 3/8 - 3/8 

CI220808WB 1/4 - 1/4 Blue Collet 

CI221212WB 3/8 - 3/8 Blue Collet 

CI220808WR 1/4 - 1/4 Red Collet 

PART NO. 

TUBE 

OD 

CI0208W 1/4 

CI0212W 3/8 

CI0208WB 1/4 Blue Collet 


OD OD 

CI061208W 3/8 - 1/4 

BARB CONNECTOR SUPERSEAL X BARB 

PART NO. SUPERSEAL HOSE 

OD ID 

CI270808W 1/4 - 1/4 

UNION ELBOW 


TUBE TO HOSE ELBOW 

PART NO. 

TUBE 

OD 

CI0308W 1/4 

CI0312W 3/8 



CI0312WR 3/8 Red Collet 



OD DIA. (INCH) 

CI1208W 1/4 0.67 



OD ID 

CI291208W 3/8 - 1/4 

FIXED ELBOW 

NPTF THREAD 


OD NPTF 

10 

PART NO. 

TUBE 

OD 

CI0408W 1/4 

CI0412W 3/8 


OD OD 

CI211206W 3/8 - 3/16 

CI480821W 1/4 x 1/8 

CI480822W 1/4 x 1/4 

CI480823W 1/4 x 3/8 

CI481222W 3/8 x 1/4

Inch Superseal Fittings 

For use with Stainless Steel Tubing 

The SI Range of inch-size push-in fittings is offered for tube sizes 1/4" O.D. and 

3/8" O.D. Superseal is a special fitting designed to provide extra grip on stainless 

steel tubes. 

The Superseal design features a collet with integrally molded stainless steel teeth 

similar to the standard Super Speedfit design, but incorporating an additional 

hand-operated nut and wedge shaped plastic washer to apply extra pressure 

to the collet and the double o-ring seals. This ensures that the collet teeth bite 

thoroughly into the tube to provide grip, while at the same time compressing the 

o-rings to further enhance sealing. 

Like other John Guest Fittings, Superseal is suitable for potable liquids and other 

food quality applications. 


UNION ELBOW 

SUPERSEAL – SPEEDFIT 

UNION ELBOW 

SUPERSEAL – SUPERSEAL 

PART NO. SUPERSEAL SPEEDFIT 

OD 

OD 

PART NO. 

SUPERSEAL SUPERSEAL 

OD 

OD 

SI030812S 1/4 - 3/8 

SM030808S 5/16 - 5/16 

SI031012S 5/16 - 3/8 

SI031210S 3/8 - 5/16 

SI031212S 3/8 - 3/8 

SM400808S 5/16 - 5/16 

SI401210S 3/8 - 5/16 

SI401212S 3/8 - 3/8 

UNION CONNECTOR SUPERSEAL – 

SUPERSEAL 

UNION CONNECTOR SUPERSEAL – 

SPEEDFIT 


BSPT THREAD 

PART NO. 

SUPERSEAL 

OD 

SM410808E 5/16 

PART NO. SUPERSEAL THREAD 

OD BSPT 

SM010802S 5/16 x 1/4 


OD 

OD 

SM040808S 5/16 - 5/16 

SI041012S 5/16 - 3/8 

SI041210S 3/8 - 5/16 

SI041212S 3/8 - 3/8 

FLOW BEND CONNECTOR SUPERSEAL – 

SPEEDFIT 


BSPP THREAD 

BARB CONNECTOR 


OD 

OD 


OD BSPP 

SM010812S 5/16 x 1/4 

FLARE MALE CONNECTOR MFL THREAD 

PART NO. SUPERSEAL HOSE 

OD 

ID 

SI270808S 1/4 - 1/4 

SI271008S 5/16 - 1/4 

SI271208S 3/8 - 1/4 

SM420808S 5/16 - 5/16 

SI421012S 5/16 - 3/8 

SI421210S 3/8 - 5/16 

SI421212S 3/8 - 3/8 

SPANNER 


OD 

MFL 

SM0108F4S 5/16 x 1/4 

SM0108F6S 5/16 x 3/8 

PART NO. 

SIZE 

SPAN1 5/16 & 3/8 

11

Inch Brass Fittings 

Designed for use in coffee brewing equipment, beverage dispensing and vending 

machine applications. The fittings are manufactured in brass with a polypropylene 

collet and a food grade EPDM o-ring. 




Min. 33˚F / 1˚C 


BRASS FLARE FEMALE 

CONNECTOR 

FFL 

THREAD 

BRASS FEMALE CONNECTOR 

(GARDEN HOSE) 

NH 

THREAD 

(National Hose) 

BRASS FEMALE CONNECTOR 

(GARDEN HOSE) 

NH 

THREAD 

(National Hose) 

PART NO. TUBE 

OD 

THREAD 

N.H. 

NC2258 

3/8 x 3/4 - 11.5 NH 


OD FFL 

MI4508F4S 1/4 x 1/4 

MI4512F4S 3/8 x 1/4 

MI4512F6S 3/8 x 3/8 



BRASS POLYPROPYLENE 

FEMALE CONNECTOR 

BSPP 

THREAD 


OD BSPP 

NC2145 1/4 x 3/4 

NC2249 3/8 x 3/4 


OD 

NH 

NC2098 1/4 x 3/4 - 11.5 NH 

A plug in elbow shown on page 5 will provide a 

neat 90° installation. The tube can be orientated 

in any direction. 

Metric to Inch Fittings 


Tube to Hose Stem 

TEE ADAPTER 


OD OD 

NC462 15mm - 1/2” 


OD 

ID 

NC932 15mm - 1/2” 


ENDS BRANCH 

NC869 15mm - 3/8" 

STEM TO TUBE ADAPTER 

BARB CONNECTOR 

STEM TO STEM ADAPTER 


OD OD 

NC2164 15mm - 3/8” 

NC2173 1/2” - 15mm 

NC908 1/2” - 18mm 


OD 

ID 

NC448 15mm - 1/2” 

PART NO. STEM STEM 

OD 

OD 

NC478 15mm - 3/8" 

12

Inch Polypropylene Angle Stop 

Adapter Valves 

The PPSAV Range of inch-size Angle Stop Adapter Valves is offered in white 

polypropylene with food grade EPDM o-rings. Our Angle Stop Adapter Valve 

connects between your valve and riser, to the main water supply line, for 

applications in Reverse Osmosis, Filtration Systems, Automatic Coffee Brewers, 

Ice-makers, and many more. For use with other potable liquids, please refer to our 

Technical Support Department for guidance. 

The valves are not to be used with compressed air, explosive gases, 

petroleum spirits and other fuels, or for heating systems. 

FOR USE WITH COLD WATER SUPPLY ONLY. 


Water Max. 150 psi at 70˚F (10 bar at 20˚C) 

Max. 60 psi at 140˚F (4 bar at 60˚C) 

Min. 33˚F/1˚C 

ANGLE STOP ADAPTER VALVE 

New 

ANGLE STOP ADAPTER VALVE (conversion thread) 

Conversion Adapter Included* 

PART NO. THREAD MALE THREAD FEMALE TUBE 

COMPRESSION COMPRESSION OD 

ASVPP1 3/8" x 3/8" x 1/4" 

ASVPP2 3/8" x 3/8" x 3/8" 

PART NO. THREAD MALE THREAD TUBE 

FEMALE NPS COMPRESSION OD 

ASVPP5 1/2" x 3/8" x 1/4" 

ASVPP6 1/2" x 3/8" x 3/8" 

*Conversion Adapter can be threaded to either 

side of the valve to make configurations of 

1/2"x1/2" NPS or 3/8"x3/8" Compression. 

How to connect the Angle Stop Adapter Valve 

1 2 3 4 5 6 7 

1. Shut off water supply at brass/chrome supply valve. 

2. Disconnect riser from brass/chrome supply valve. 

3. Ensure that the sealing gasket is fully seated into 

the Angle Stop Valve female thread. 

4. Install Angle Stop Adapter Valve on supply valve. 

5. Connect the riser to the Angle Stop Adapter Valve. 

6. Fully insert tubing into the Speedfit ® side of the valve. 

7. Open valves and check for leaks. 

13

Inch Polypropylene Shut-Off Valve 

The PPSV Range of Shut-Off Valve is offered for tube sizes 

1/4" O.D. and 3/8" O.D., produced in polypropylene and fitted 

with EPDM o-rings. Polypropylene has the advantage of being 

more chemically resistant than acetal. 

The valves are for use with potable water. For use with 

other potable liquids please contact our Technical Support 

Department for guidance. 

The valves are not to be used with compressed air, explosive 

gases, petroleum spirits and other fuels or for heating systems. 


Water Max. 150 psi at 70˚F (Max.10 bar at 20˚C) 

Max. 60 psi at 140˚F (Max. 4 bar at 60˚C) 

Min. 33˚F/1˚C 


SPEEDFIT TO MALE 

NPTF THREAD 

SPEEDFIT TO SPEEDFIT 

SPEEDFIT TO FEMALE 

NPTF THREAD 


OD NPTF 

PART NO. 

TUBE 

OD 


OD NPTF 

PPSV010822W 1/4 x 1/4 

PPSV011223W 3/8 x 3/8 

PPSV040808W 1/4 

PPSV041212W 3/8 

PPSV500822W 1/4 x 1/4 

PPSV501222W 3/8 x 1/4 

Inch Acetal Shut-Off Valve 

The PISV Range of Inch-size Shut-Off Valves is available in 

3/8" and 1/2" tube O.D. size. The Valve is manufactured in 

gray acetal copolymer with a nitrile o-ring. 

The valves are available with long and short handles to operate 

a 1/4 turn off action. 

Specifically designed for compressed air and potable liquids, 

the valves are ideal for CO2 lines in beverage dispensing and for 

pneumatic applications. 

It is the customer’s responsibility to ensure that the installation of 

John Guest fittings in CO2 applications is performed in accordance 

with the relevant industry and government safety guidelines. 


Air 150 psi at -4˚F (10 bar at -20˚C) 

Air/Potable Liquids Max. 150 psi at 33˚F (10 bar at 1˚C) 




SHUT-OFF VALVE 

PART NO. 

SHORT HANDLE 

TUBE 

OD 

PISV0412CS 3/8 

SHUT-OFF VALVE 

Acetal Angle Stop Valves 

John Guest Angle Stop Valves are manufactured in Acetal with 

EPDM o-rings. They incorporate a single check valve and a 

1/4 turn chromium plated ball valve. 

The valves are for use with potable water. For use with 

other potable liquids please refer to our Technical Support 

Department for guidance. 

The valves are not to be used with compressed air, explosive 

gases, petroleum spirits and other fuels or for heating systems. 

PART NO. 

LONG HANDLE 

TUBE 

OD 

PISV0412S 3/8 

PISV0416S 1/2 

MOUNTING CLIP 

PART NO. 

SVMC-10 

The mounting clip is designed to give a very firm grip. A 

twisting action is needed to remove the valve. The clip can 

be used with either shut-off valve. When used with the short 

handle version, valves can be banked together. 

Available for 3/8" O.D. valves. 


Water Max. 174 psi at 68˚F (12 bar at 20˚C) 

Min. 87 psi at 149˚F (6 bar at 65˚C) 

New 

ACETAL tee VALVE 

PART NO. TUBE TUBE OD 

OD BRANCH 

ASV3 15mm – 1/4 

ASV4 15mm – 3/8 

14

CTS Size Plastic 


John Guest Copper Tube Size Plastic Half Cartridges have 

been designed for use in Plumbing, Recreational Vehicle and 

Marine Applications. 

Half Cartridge bodies and collets are produced from high 

quality Engineered Thermoplastic materials with EPDM 

o-rings. 

CTS Size Metal 


New 

New 

Metal Half Cartridges have also been designed for use in 

Plumbing, Recreational Vehicle and Marine Applications. 

Metal Half Cartridges bodies are produced from brass, 

Collets from high quality Engineered Thermoplastic 

materials with EPDM o-rings. 

INCH SERIES 

PART NO. 

CTS 

PCI2820 1/2" 

PCI2828 3/4" 

INCH SERIES 

PART NO. 

CTS 

MWI2820 1/2” 

MWI2828 3/4” 

Cartridge Assembly 

1. Ensure that the cavity 

is clean and free from 

debris, burrs, score 

marks, etc. 

2. Insert the cartridge 

down into the housing; 

ensure the cartridge is 

flush with the housing. 

3. Insert the o-ring. 4. Insert Collet to 

complete assembly. 

Cavity Dimensional Detail 

Plastic Half Cartridge 

Metal Half Cartridge 

R0.02 

R0.02 

R0.03 

R0.03 

Cartridge 

O-ring 

tube stop 

60° 

Cartridge 

O-ring 

tube stop 

60° 

R0.01 

R0.01 

R0.01 

R0.01 

Size Data 

Size ØA ØB ØC D E F ØG H 

1/2" CTS 0.967 0.836 0.638 0.392 0.693 1.057 0.546 1.060 

3/4" CTS 1.222 1.102 0.886 0.447 0.831 1.362 0.776 1.358 

Size Data 

Size ØA ØB ØC D E F ØG H 

1/2" CTS 0.935 0.836 0.638 0.335 0.693 1.057 0.546 1.060 

3/4" CTS 1.222 1.102 0.886 0.427 0.831 1.362 0.776 1.358 

15

Tube OD Size 

Plastic Half 

Cartridges 

INCH SERIES 

PART NO. 

TUBE 

OD 

GRAY ACETAL COLLET 

GRAY ACETAL BODY 

NITRILE O-ring 

PART NO. 

TUBE 

OD 

WHITE POLYPROPYLENE COLLET 

WHITE POLYPROPYLENE BODY 

EPDM O-ring 

Plastic Half Cartridges have been designed 

to provide a simple, cost-effective method 

of integrating the Super Speedfit ® 

technology into a wide variety of original 

equipment. The cartridge requires low 

insert loads, making it suitable for many 

different housing materials. 

Plastic Half Cartridges consist of three 

components: a collet gripper, an o-ring 

of food grade materials and a plastic 

body with stainless steel teeth molded 

into the circumference. 

Customers should ensure cartridges are 

suitable for their applications, materials 

and operating conditions. 

For additional information consult our 

Technical Support Department. 

PM2804S 5/32" 

PI2808S 1/4" 

PM2808S 5/16" 

PI2812S 3/8" 

PI2816S 1/2" 

Most sizes available with Blue, Red or White Collet, 

suffix B,R or W (Ex. PI2808S-B) 

Also available with double o-rings, please use 

suffix 2 (Ex. PI2808S2). 

PART NO. 

TUBE 

OD 

PCI2808S 1/4" 

PCM2808S 5/16" 

PCI2812S 3/8" 

PCI2816S 1/2" 


GRAY ACETAL BODY 

EPDM O-ring 

PP2808W 1/4” 

PP2812W 3/8” 

PART NO. 

TUBE 

OD 

PI2808W 1/4" 

PM2808W 5/16" 

PI2812W 3/8" 

WHITE ACETAL COLLET 

WHITE ACETAL BODY 


Also available with Blue or Red Collet, suffix B or R 

(Ex. PI2808W-B). 


suffix 2 (Ex. PI2808W2). 

METRIC SERIES 

PART NO. 

TUBE 

OD 

BLACK ACETAL COLLET 

BLACK ACETAL BODY 


PM2806E 

PM2808E 

PM2810E 

6mm 

8mm 

10mm 


suffix 2 (Ex. PM2806E2). 

Tube OD Size 

Metal Half 

Cartridges 

Metal Half Cartridges are designed with 

the same Super Speedfit ® technology as 

our Plastic Half Cartridges. As with Plastic 

Half Cartridges, Metal Half Cartridges 

are designed to provide a simple, costeffective 

method of securing tubing into 

taps, manifolds, flow direction splitters 

and many other types of components, 

which can be produced in a wide variety 

of metals. 

Metal Half Cartridges consist of three 

components: a collet gripper, an o-ring of 

food grade materials, and a metal body. 

Customers should ensure cartridges 

are suitable for their applications, 

materials and operating conditions. 

For additional information consult 

our Technical Support Department. 

INCH SERIES 

PART NO. 

TUBE 

OD 

MM2804N 5/32" 

MI2806N 3/16" 

MI2808N 1/4" 

MM2808N 5/16" 

MI2812N 3/8" 

MI2816N 1/2" 



suffix 2 (Ex. MM2804N2) 

PART NO. 

CI2808W 1/4" 

CI2812N 3/8" 

CI2820N 5/8" 

PART NO. 

BRASS BODY 


WHITE ACETAL COLLET ON 1/4” 

BLACK ACETAL COLLET ON 5/32” 

GRAY ACETAL COLLET ON 3/8” AND 5/8” 

BRASS BODY 

EPDM O-ring 

TUBE 

OD 

TUBE 

OD 


STAINLESS STEEL BODY 


METRIC SERIES 

PART NO. 

MM2804N 

MM2805N 

MM2806N 

MM2808N 

MM2810N 

MM2812N 

BLACK ACETAL COLLET ON 5, 6, 10 AND 12MM 

GRAY ACETAL COLLET ON 4 AND 8MM 

TUBE 

OD 

4mm 

5mm 

6mm 

8mm 

10mm 

12mm 


suffix 2 (Ex. MM2804N2) 

PART NO. 

CM2808N 

CM2815N 

CM2822N 

BRASS BODY 


BLACK ACETAL COLLET ON 8MM 

GRAY ACETAL COLLET ON 15 AND 22MM 

BRASS BODY 

EPDM O-ring 

TUBE 

OD 

8mm 

15mm 

22mm 

MI2806ST 3/16" 

MI2808ST 1/4" 

MM2808ST 5/16" 

MI2812ST 3/8" 

16


Cartridge Assembly 

1. Ensure that the cavity 

is clean and free from 

debris, burrs, score 

marks, etc. 

2. Insert the cartridge 

down into the housing; 

ensure the cartridge is 

flush with the housing. 

3. Insert the o-ring. 4. Insert Collet to 

complete assembly. 

Cavity Dimensional Detail (Inch) 

Inch 

Tube OD ØA ØB ØC D E1 E2 F1 F2 ØG H 

5/32" * 0.492 0.327 0.163 0.193 0.350 0.445 0.504 0.598 0.13 0.59 

5/32" ** 0.472 0.327 0.163 0.193 0.350 0.445 0.504 0.598 0.13 0.59 

3/16" 0.472 0.348 0.193 0.193 0.340 0.440 0.490 0.590 0.16 0.59 

1/4" 0.528 0.424 0.255 0.181 0.386 0.480 0.555 0.650 0.23 0.67 

Cartridge 

O-ring 

tube stop 

5/16" 0.544 0.470 0.320 0.215 0.400 0.500 0.590 0.690 0.29 0.67 

3/8" 0.632 0.547 0.380 0.270 0.465 0.565 0.720 0.815 0.35 0.79 

1/2" 0.777 0.671 0.506 0.304 0.561 0.659 0.797 0.896 0.48 0.93 

5/8" 0.935 0.836 0.638 0.335 0.703 - 1.093 - 0.50 1.06 

All dimensions in inches 

* - Metal Half Cartridges. ** - Plastic Half Cartridges. 

E1 and F1 relate to one o-ring. 

E2 and F2 relate to two o-rings. 

Cavity Dimensional Detail (Metric) 

Metric 

Tube OD ØA ØB ØC D E1 E2 F1 F2 ØG H 

4mm * 12.50 8.30 4.14 4.90 8.90 11.30 12.80 15.20 3.30 15.0 

4mm ** 11.98 8.30 4.14 4.90 8.90 11.30 12.80 15.20 3.30 15.0 

5mm 11.98 9.06 5.13 4.90 8.63 11.17 12.44 14.98 4.06 15.0 

6mm 13.41 10.00 6.12 4.60 9.80 12.20 14.00 16.50 5.30 16.5 

Cartridge 

O-ring 

tube stop 

8mm 13.82 11.94 8.13 5.46 10.15 12.70 15.00 17.50 7.35 17.0 

10mm 16.05 14.00 10.15 6.86 11.81 14.35 18.17 20.71 9.20 19.0 

12mm* 19.10 16.54 12.15 8.65 15.50 19.00 23.50 27.00 11.20 22.0 

12mm** 19.74 16.54 12.15 7.72 15.90 - 23.90 - 11.20 24.0 

15mm 22.86 20.32 15.19 9.50 17.50 21.00 26.90 30.40 14.20 27.0 

22mm 31.05 27.80 22.20 10.85 21.10 24.70 31.60 35.20 21.20 34.5 

All dimensions in mm 

* - Metal Half Cartridges. ** - Plastic Half Cartridges. 

E1 and F1 relate to one o-ring. 

E2 and F2 relate to two o-rings. 

17

Inch/Metric Polyethylene 

Tubing 

The John Guest PE 

Range of plastic tubing 

is produced in Linear Low 

Density Polyethylene for 

cold and intermittent hot 

water applications. 

Our tubing is made from 

FDA approved materials 

and is NSF International 

standard 51 & 61 certified. 

John Guest LLDPE Tubing 

provides excellent resistance 

to environmental stress cracking as measured by ASTM D-1693 

(10% IGEPAL). 

John Guest Polyethylene tubing is designed for use with John Guest 

Super Speedfit push-in fittings, John Guest Shut-Off Valves and virtually 

all standard tubing connectors. 

Sizes Available 

PART NO. OD ID COIL 

LENGTH 

MIN. 

RADIUS 

PE-08-BI-0500F-N 1/4”(0.250”) 0.170” 500 FT 1.00” 

PE-08-BI-1000F-N 1/4”(0.250”) 0.170” 1000FT 1.00” 

PE-10-CI-0500F-N 5/16”(0.3125”) 0.187 500 FT 1.13” 

PE-12-EI-0500F-N 3/8”(0.375”) 0.250” 500 FT 1.25” 

PE-16-GI-0250F-N 1/2”(0.500”) 0.375” 250 FT 2.50” 

PE-04025-0100M-N 4mm 2.5mm 100m 25mm 

PE-0604-0100M-N 6mm 4mm 100m 25mm 

PE-0806-100M-N 8mm 6mm 100m 30mm 

PE-1007-100M-N 10mm 7mm 100m 32mm 

PE-1209-100M-N 12mm 9mm 100m 63mm 

PE-15115-0100M-B 15mm 11.5mm 100m 100mm 

N denotes natural color. To request other colors please refer to table 

below. 

Colors Available 

SUFFIX COLOR 

SIZES 

1/4” 5/16” 3/8” 1/2” 4mm 6mm 8mm 10mm 12mm 15mm 

N NATURAL 4 4 4 4 4 4 4 4 4 O 

W WHITE 4 O 4 4 O O 4 O O O 

B BLUE 4 4 4 4 4 4 4 4 4 4 

E *BLACK 4 4 4 4 4 4 4 4 4 O 

R RED 4 4 4 4 4 4 4 4 4 4 

O ORANGE 4 O 4 O O O O O O O 

V VIOLET O O 4 O O O O O O O 

G GREEN 4 O 4 O O O O O O 4 

Y YELLOW 4 O 4 O O O O O O O 

* Black tubing is UV stabilized. 

4 Denotes standard colors available. 

O Denotes optional colors which may be available based on 

order quantity. 

Working Pressures and Temperatures - LLDPE 

TUBE OD 

TUBE ID 

1/4" x 0.170" 230 psi @ 70°F 

5/16" x 0.187" 15 bar @ 20°C 

3/8" x 0.25" 

4mm x 2.5mm 120 psi @ 150°F 

6mm x 4mm 8 bar @ 65°C 

1/2" x 0.375" 150 psi @ 70°F 

8mm x 6mm 10 bar @ 20°C 

10mm x 7mm 

12mm x 9mm 90 psi @ 150°F 

15mm x 11.5mm 6 bar @ 65°C 

1 Bar = 14.5 psi (approx.) 

Maximum Working Temperature 150ºF at pressures shown in chart 

above. For temperatures above 150ºF customers should contact our 

Technical Support Department. 

Please note maximum pressure rating for a ‘system’ depends on the 

lowest rated component, e.g., most John Guest fittings have a different 

rating from the tube ratings shown above. 

Burst Pressures are approximately 3 times the maximum working 

pressure. 

Tube inserts 

If the tube is used in a hot water system a tube insert is necessary. 

PART NO. TUBE ID TUBE OD 

TSI250S 1/4 - 5/16 

TSI312S 5/16 - 3/8 

TSI375S 3/8 - 1/2 

PART NO. TUBE OD 

TSM10N 10 

TSM15N 15 

TSM22N 22 

Chemical Resistance 

For use with chemicals or potentially aggressive liquids, please 

refer to our Technical Service Department. 

Exposure to Ultraviolet Light 

John Guest Black LLDPE tubing is UV stabilized and can be exposed to 

direct ultraviolet light (e.g. direct sunlight); other colors of John Guest 

LLDPE tubing are not UV stabilized and cannot be exposed to direct 

ultraviolet light. 

Pneumatics Applications 

John Guest LLDPE tube is suitable for pneumatic applications providing 

pressure is maximum 150 psi @ 70ºF (10 bar @ 20ºC). At elevated 

temperatures 120°F+ (50ºC+) mineral oil will degrade LLDPE tube and, 

therefore, LLDPE tube used in pneumatic circuits should be periodically 

checked and replaced if necessary. 

NOTE: When using cleaning agents or other potentially aggressive 

liquids, please ensure compatibility with tubing and fittings. LLDPE is 

not recommended for mineral oils, gases and fuels or high pressure 

compressed air / pneumatic systems. 

Tube Tolerances 

1/4" to 1/2" +0.001/-0.004" 

4mm to 6mm 

8mm to 12mm 

15mm 

+0.05/-0.07mm 

+0.05/-0.10mm 

+0.10/-0.10mm 

NSF 51 

NSF 61 

18

Metric Polypropylene Fittings 

The PPM Range of metric size push-in fittings is offered for our tube sizes 8mm 

O.D. to 12mm O.D. The fittings are manufactured in white polypropylene with 

EPDM o-rings. They have been developed to satisfy the compatibility needs for a 

wide range of applications. 




Min. 33˚F/1˚C 


New 

union CONNECTOR 

union ELBOW 

union TEE 

PART NO. 

TUBE 

OD 

PPM0408W 8 

PPM0412W 12 

PART NO. 

TUBE 

OD 

PPM0308W 8 

PPM0312W 12 

PART NO. 

TUBE 

OD 

PPM0208W 8 

PPM0212W 12 

REDUCING union CONNECTOR 

plug-in ELBOW 

REDUCER 


OD 

OD 

PPM201512W 15 - 12 


OD 

OD 

PPM220808W 8 - 8 

PPM221212W 12 - 12 


OD 

OD 

PPM061512W 15 - 12 

PLUG 

DIVIDER 

PART NO. 

TUBE 

OD 

PPM0808W 8 

PART NO. 

TUBE 

OD 

PPM2312W 12 

Adapters to convert to Inch sizes 


19

Metric Acetal Fittings 

The PM Range of metric-size push-in fittings is offered for tube sizes 4mm O.D. 

to 12mm O.D. The fittings are manufactured in black acetal copolymer with food 

grade nitrile o-rings. Especially produced for foodstuff and potable liquids, they 

are equally suitable for air and inert gases and can therefore be used on CO2 lines, 

pneumatics applications and vacuum. 



BSPT THREAD 

UNION TEE 

STEM ADAPTER 

BSPT THREAD 


OD BSPT 

(MM) (IN) 

PM010401E 4 x 1/8 

PM010402E 4 x 1/4 

PM010501E 5 x 1/8 

PM010502E 5 x 1/4 

PM010601E 6 x 1/8 

PM010602E 6 x 1/4 

PM010801E 8 x 1/8 

PM010802E 8 x 1/4 

PM010803E 8 x 3/8 

PM011002E 10 x 1/4 

PM011003E 10 x 3/8 

PM011004E 10 x 1/2 

PM011203E 12 x 3/8 

PM011204E 12 x 1/2 

PART NO. 

UNION ELBOW 

TUBE 

OD 

(MM) 

PM0204E 4 

PM0205E 5 

PM0206E 6 

PM0208E 8 

PM0210E 10 

PM0212E 12 


OD BSPT 

(MM) (IN) 

PM050401E 4 x 1/8 

PM050402E 4 x 1/4 

PM050501E 5 x 1/8 

PM050502E 5 x 1/4 

PM050601E 6 x 1/8 

PM050602E 6 x 1/4 

PM050801E 8 x 1/8 

PM050802E 8 x 1/4 

PM050803E 8 x 3/8 

PM051002E 10 x 1/4 

PM051003E 10 x 3/8 

PM051004E 10 x 1/2 

PM051203E 12 x 3/8 

PM051204E 12 x 1/2 

STEM ADAPTER 

BSPP THREAD 


BSPP THREAD 

PART NO. 

TUBE 

OD 

(MM) 


OD BSPP 

(mm) (IN) 

PM010411E 4 x 1/8 

PM010412E 4 x 1/4 

PM010511E 5 x 1/8 

PM010512E 5 x 1/4 

PM010611E 6 x 1/8 

PM010612E 6 x 1/4 

PM010811E 8 x 1/8 

PM010812E 8 x 1/4 

PM010813E 8 x 3/8 

PM011012E 10 x 1/4 

PM011013E 10 x 3/8 

PM011014E 10 x 1/2 

PM011213E 12 x 3/8 

PM011214E 12 x 1/2 


OD NPTF 

(MM) (IN) 

PM010622E 6 x 1/4 

PM0304E 4 

PM0305E 5 

PM0306E 6 

PM0308E 8 

PM0310E 10 

PM0312E 12 


PART NO. 

TUBE 

OD 

(MM) 

PM0404E 4 

PM0405E 5 

PM0406E 6 

PM0408E 8 

PM0410E 10 

PM0412E 12 


OD BSPP 

(MM) (IN) 

PM050411E 4 x 1/8 

PM050412E 4 x 1/4 

PM050511E 5 x 1/8 

PM050512E 5 x 1/4 

PM050611E 6 x 1/8 

PM050612E 6 x 1/4 

PM050811E 8 x 1/8 

PM050812E 8 x 1/4 

PM050813E 8 x 3/8 

PM051012E 10 x 1/4 

PM051013E 10 x 3/8 

PM051014E 10 x 1/2 

PM051213E 12 x 3/8 

PM051214E 12 x 1/2 

20

REDUCER 

SWIVEL ELBOW 

BSPP THREAD 


BSPT THREAD 


OD OD 

(MM) (MM) 

PM060504E 5 - 4 

PM060604E 6 - 4 

PM060605E 6 - 5 

PM060804E 8 - 4 

PM060805E 8 - 5 

PM060806E 8 - 6 

PM061006E 10 - 6 

PM061008E 10 - 8 

PM061208E 12 - 8 

PM061210E 12 - 10 

PM061510E 15 - 10 

PLUG 


OD BSPP 

(MM) (IN) 

PM090411E 4 x 1/8 

PM090412E 4 x 1/4 

PM090511E 5 x 1/8 

PM090512E 5 x 1/4 

PM090611E 6 x 1/8 

PM090612E 6 x 1/4 

PM090811E 8 x 1/8 

PM090812E 8 x 1/4 

PM090813E 8 x 3/8 

PM091012E 10 x 1/4 

PM091013E 10 x 3/8 

PM091014E 10 x 1/2 

PM091213E 12 x 3/8 

PM091214E 12 x 1/2 


OD BSPT 

(MM) (IN) 

PM110401E 4 x 1/8 

PM110402E 4 x 1/4 

PM110501E 5 x 1/8 

PM110502E 5 x 1/4 

PM110601E 6 x 1/8 

PM110602E 6 x 1/4 

PM110801E 8 x 1/8 

PM110802E 8 x 1/4 

PM110803E 8 x 3/8 

PM111002E 10 x 1/4 

PM111003E 10 x 3/8 

PM111004E 10 x 1/2 

PM111203E 12 x 3/8 

PM111204E 12 x 1/2 


BSPT THREAD 

PART NO. 

STEM 

OD 

(MM) 


BSPP THREAD 

PM0804R 4 

PM0805R 5 

PM0806R 6 

PM0808R 8 

PM0810R 10 

PM0812R 12 

R-Denotes Red Color Plug. 

SWIVEL ELBOW 


OD BSPT 

(MM) (IN) 

PM090401E 4 x 1/8 

PM090402E 4 x 1/4 

PM090501E 5 x 1/8 

PM090502E 5 x 1/4 

PM090601E 6 x 1/8 

PM090602E 6 x 1/4 

PM090801E 8 x 1/8 

PM090802E 8 x 1/4 

PM090803E 8 x 3/8 

PM091002E 10 x 1/4 

PM091003E 10 x 3/8 

PM091004E 10 x 1/2 

PM091203E 12 x 3/8 

PM091204E 12 x 1/2 

BSPT THREAD 


OD BSPT 

(MM) (IN) 

PM100401E 4 x 1/8 

PM100402E 4 x 1/4 

PM100501E 5 x 1/8 

PM100502E 5 x 1/4 

PM100601E 6 x 1/8 

PM100602E 6 x 1/4 

PM100801E 8 x 1/8 

PM100802E 8 x 1/4 

PM100803E 8 x 3/8 

PM101002E 10 x 1/4 

PM101003E 10 x 3/8 

PM101004E 10 x 1/2 

PM101203E 12 x 3/8 

PM101204E 12 x 1/2 



OD BSPP 

(MM) (IN) 

BSPP THREAD 


OD BSPP 

(MM) (IN) 

PM110411E 4 x 1/8 

PM110412E 4 x 1/4 

PM110511E 5 x 1/8 

PM110512E 5 x 1/4 

PM110611E 6 x 1/8 

PM110612E 6 x 1/4 

PM110811E 8 x 1/8 

PM110812E 8 x 1/4 

PM110813E 8 x 3/8 

PM111012E 10 x 1/4 

PM111013E 10 x 3/8 

PM111014E 10 x 1/2 

PM111213E 12 x 3/8 

PM111214E 12 x 1/2 

John Guest Adaptability 

Standard Super Speedfit products can be 

coupled together to form integral new fittings. 

PM100411E 4 x 1/8 

PM100412E 4 x 1/4 

PM100511E 5 x 1/8 

PM100512E 5 x 1/4 

PM100611E 6 x 1/8 

PM100612E 6 x 1/4 

PM100811E 8 x 1/8 

PM100812E 8 x 1/4 

PM100813E 8 x 3/8 

PM101012E 10 x 1/4 

PM101013E 10 x 3/8 

PM101014E 10 x 1/2 

PM101213E 12 x 3/8 

PM101214E 12 x 1/2 

+ = 

+ = 

+ = 

21


PLUG IN ELBOW 

END STOP 


OD (MM) DIA. (MM) 

PM1204E 4 16.5 

PM1205E 5 16.5 

PM1206E 6 16.5 

PM1208E 8 21.0 

PM1210E 10 21.0 

PM1212E 12 26.5 


OD OD 

(MM) (MM) 

PM220404E 4 - 4 

PM220505E 5 - 5 

PM220606E 6 - 6 

PM220808E 8 - 8 

PM221010E 10 - 10 

PM221212E 12 - 12 

PART NO. 

TUBE 

OD 

(MM) 

PM4612E 12 

FIXED ELBOW 

ENLARGER 

TWO-WAY DIVIDER 


OD OD 

(MM) (MM) 

PM130405E 4 - 5 

PART NO. 

TUBE 

OD 

(MM) 


OD NPTF 

(MM) (IN) 

PM480621E 6 x 1/8 

PM480622E 6 x 1/4 

PM480623E 6 x 3/8 

REDUCING UNION 

PM2304E 4 

PM2308E 8 


OFFSET CONNECTOR 


OD OD 

(MM) (MM) 

PM200604E 6 - 4 

PM200804E 8 - 4 

PM200806E 8 - 6 

PM201004E 10 - 4 

PM201006E 10 - 6 

PM201008E 10 - 8 

PM201208E 12 - 8 

PM201210E 12 - 10 


OD ID 

(MM) (MM) 

PM250604E 6 - 4 

PM250806E 8 - 6 

PM251008E 10 - 8 

REDUCING TEE 


OD OD 

(MM) (MM) 

NC657 12 - 8 

U-BEND 



ENDS BRANCH 

(MM) (MM) 

PM3022AE 22 - 15 

FEMALE CONNECTOR 

PART NO. 

TUBE 

OD 

(MM) 

PMUB15E 15 


OD OD 

(MM) (MM) 

PM210604E 6 - 4 

PM210804E 8 - 4 

PM210806E 8 - 6 

PM211004E 10 - 4 

PM211006E 10 - 6 

PM211008E 10 - 8 

PM211208E 12 - 8 

PM211210E 12 - 10 


OD 

(MM) 

(IN) 

PM450411E 4 x 1/8 BSPP 

PM450612E 6 x 1/4 BSPP 

PM450812E 8 x 1/4 BSPP 

PM4508F4S 8 x 1/4 FFL 

PM4508C5S 8 x 1/2-16UN 

Accessories for PM Fittings 


22

Inch/Metric Accessories 

COLLET COVER 

FLOW BEND CLIP 

TUBE CUTTER 

PART NO. 

TUBE 

OD 

PART NO. 

The slip-on Collet Cover shown in the 

illustration prevents accidental removal 

or tampering with tubing. Tubing can be 

inserted with the Collet Cover already 

attached to the fittings or the cover 

can slide into position afterwards. The 

cover is easily removed when required 

and comes in a variety of colors for 

color coding. 

Colors available - Suffix indicates colors 

E = Black Y = Yellow B = Blue 

R = Red S = Gray G = Green 

INCH SIZE 

PM2608S 

PM2610S 

TUBE INSERT 

5/16 (8mm) 

3/8 (10mm) 

Designed to support tube 

and eliminate kinking. 


ID OD 

TSI250S 1/4 5/16 

TSI312S 5/16 3/8 

TSI375S 3/8 1/2 

TSM10N 10 

TSM15N 15 

TSM22N 22 

TSNIP 

BLADES 

BLADES ONLY 

Suitable for up to 12mm tube. 

PIPE CUTTER 

PART NO. 

JG-TS 

Suitable for up to 22mm pipe. 

PART NO. 

TUBE 

OD 

LOCKING CLIP 

PM1904S 5/32 

PI1906S 3/16 

PI1908S 1/4 

PM1908S 5/16 

PI1912S 3/8 

PI1916S 1/2 

Please indicate by suffix, color required or gray 

will be supplied. 

METRIC SIZE 

PART NO. 

TUBE 

OD 

PM1904E 4 

PM1905E 5 

PM1906E 6 

PM1908E 8 

PM1910E 10 

PM1912E 12 

PM1915E 15 

PM1918E 18 

PM1922E 22 

15mm to 22mm sizes are only available in black 

as standard, white, red or blue 

Please indicate by suffix, color required or black 

will be supplied. 

COLLET LOCKING/Release TOOL 

PART NO. 

SIZE 

ICLT/2 3/16 to 1/2 

TSPITOOL 1/4, 3/8 

PART NO. 

TUBE 

OD 

Inch PIC1808R 1/4 

PIC1812R 3/8 

PIC1816R 1/2 

Metric PMC1808R 8mm 

PMC1815R 15mm 

Secures the collet in its position to 

prevent an accidental disconnection 

of the tube. 

Locking clips should be connected only 

after full insertion to prevent scraping 

of the tube. Locking Clips are not 

designed for use with John Guest Stem 

Adapters in Swivel Combinations. 

23

Chemical Compatability Chart 

Chemical Compatability for Material Contact of Standard PM/PI, CM/CI and PP Range of 

Fittings and LLDPE Range of Tubing. 

This chart describes the compatability of the materials of construction of our standard PM/PI, CM/CI and PP Fittings and LLDPE Tubing when 

in contact solely with the listed chemical substance. It is intended as a guide only and is not an assurance of suitability for any specific application. 

Customers are advised to determine suitability for their application. For further details please contact our Technical Support Department. 

CHEMICAL PM/PI RANGE CM/CI RANGE PP RANGE LLDPE TUBING CHEMICAL PM/PI RANGE CM/CI RANGE PP RANGE LLDPE TUBING 

ACETALDEHYDE UNSUITABLE SATISFACTORY NOT TESTED NOT TESTED CANE-SUGAR LIQUORS NOT TESTED NOT TESTED NOT TESTED NOT TESTED 

ACETATE SOLVENTS NOT TESTED NOT TESTED NOT TESTED NOT TESTED CARBON DIOXIDE - DRY SATISFACTORY SATISFACTORY NOT TESTED GOOD 

ACETIC ACID 3% SATISFACTORY GOOD GOOD NOT TESTED CARBON DIOXIDE - WET SATISFACTORY SATISFACTORY NOT TESTED GOOD 

ACETIC ACID 20% SATISFACTORY NOT TESTED NOT TESTED NOT TESTED CARBON TETRACHLORIDE UNSUITABLE UNSUITABLE UNSUITABLE UNSUITABLE 

ACETIC ACID 50% SATISFACTORY NOT TESTED NOT TESTED NOT TESTED CHLORINE - DRY UNSUITABLE UNSUITABLE UNSUITABLE POOR 

ACETONE UNSUITABLE GOOD GOOD NOT TESTED CHLORINE - WET UNSUITABLE UNSUITABLE UNSUITABLE NOT TESTED 

ACETOPHENONE UNSUITABLE SATISFACTORY NOT TESTED NOT TESTED CHLOROFORM UNSUITABLE UNSUITABLE UNSUITABLE UNSUITABLE 

ACETYLENE NOT FOR USE WITH THIS SUBSTANCE GOOD CHROMIC ACID 3% UNSUITABLE UNSUITABLE UNSUITABLE NOT TESTED 

AIR GOOD GOOD GOOD GOOD CITRIC ACID 10% SATISFACTORY SATISFACTORY SATISFACTORY NOT TESTED 

ALCOHOLS 95% NOT TESTED GOOD NOT TESTED NOT TESTED COKE OVEN GAS UNSUITABLE UNSUITABLE UNSUITABLE NOT TESTED 

ALUMINUM CHLORIDE UNSUITABLE UNSUITABLE NOT TESTED NOT TESTED COPPER SALTS NOT TESTED NOT TESTED GOOD NOT TESTED 

ALUMINUM SULFATE SATISFACTORY SATISFACTORY NOT TESTED NOT TESTED COPPER SULFATE 10% GOOD GOOD NOT TESTED GOOD 

ALUMS UNSUITABLE UNSUITABLE NOT TESTED GOOD COTTONSEED OIL GOOD GOOD NOT TESTED SATISFACTORY 

AMMONIA - COLD GAS GOOD GOOD GOOD GOOD CREOSOTE SATISFACTORY UNSUITABLE UNSUITABLE NOT TESTED 

AMMONIA - LIQUID NOT TESTED NOT TESTED NOT TESTED NOT TESTED CYLCOHEXANOL SATISFACTORY SATISFACTORY SATISFACTORY NOT TESTED 

AMMONIUM ACETATE NOT TESTED NOT TESTED NOT TESTED GOOD CYLCOHEXANONE UNSUITABLE SATISFACTORY SATISFACTORY UNSUITABLE 

AMMONIUM CARBONATE UNSUITABLE GOOD GOOD NOT TESTED D.D.T. NOT TESTED NOT TESTED NOT TESTED NOT TESTED 

AMMONIUM CHLORIDE UNSUITABLE UNSUITABLE GOOD NOT TESTED DETERGENT SOLUTION GOOD GOOD GOOD SATISFACTORY 

AMMONIUM HYDROXIDE UNSUITABLE GOOD NOT TESTED NOT TESTED DIBUTYL PHTHALATE UNSUITABLE SATISFACTORY NOT TESTED POOR 

AMMONIUM NITRATE SATISFACTORY SATISFACTORY GOOD GOOD DICHLOROETHYLENE NOT TESTED NOT TESTED NOT TESTED NOT TESTED 

AMMONIUM PHOSPHATE NOT TESTED NOT TESTED NOT TESTED GOOD DIMETHYLFORMAMIDE UNSUITABLE SATISFACTORY SATISFACTORY NOT TESTED 

AMMONIUM SULFATE 10% pH 5.8 GOOD GOOD GOOD GOOD DIOXANE UNSUITABLE SATISFACTORY NOT TESTED SATISFACTORY 

AMYL ACETATE UNSUITABLE NOT TESTED NOT TESTED POOR ETHER (DAB 6) NOT TESTED NOT TESTED NOT TESTED UNSUITABLE 

AMYL ALCOHOL SATISFACTORY SATISFACTORY SATISFACTORY SATISFACTORY ETHYL ACETATE UNSUITABLE SATISFACTORY SATISFACTORY POOR 

AMYL CHLORIDE NOT TESTED NOT TESTED NOT TESTED UNSUITABLE ETHYL ALCOHOL (50%) GOOD GOOD GOOD GOOD 

ANILINE UNSUITABLE SATISFACTORY SATISFACTORY NOT TESTED ETHYL ALCOHOL (95%) GOOD GOOD GOOD GOOD 

ASPHALT SATISFACTORY UNSUITABLE UNSUITABLE NOT TESTED ETHYLENE GLYCOL GOOD GOOD NOT TESTED SATISFACTORY 

AUTO REAR END LUBRICANT NOT TESTED NOT TESTED NOT TESTED NOT TESTED FERNOX INHIBITOR REFER TO JOHN GUEST INC. NOT TESTED 

AUTOMATIC TRANSMISSION FLUID SATISFACTORY UNSUITABLE UNSUITABLE NOT TESTED FERRIC CHLORIDE 10% UNSUITABLE UNSUITABLE NOT TESTED GOOD 

BARIUM SALTS NOT TESTED NOT TESTED NOT TESTED NOT TESTED FERRIC SULFATE NOT TESTED NOT TESTED NOT TESTED NOT TESTED 

BEER GOOD GOOD GOOD GOOD FERROUS CHLORIDE UNSUITABLE UNSUITABLE NOT TESTED GOOD 

BEET-SUGAR LIQUORS NOT TESTED NOT TESTED NOT TESTED NOT TESTED FERROUS SULFATE SATISFACTORY SATISFACTORY NOT TESTED GOOD 

BENZALDEHYDE UNSUITABLE GOOD GOOD UNSUITABLE FORMALDEHYDE 40% UNSUITABLE SATISFACTORY SATISFACTORY SATISFACTORY 

BENZENE UNSUITABLE UNSUITABLE UNSUITABLE UNSUITABLE FORMIC ACID 10% UNSUITABLE UNSUITABLE GOOD SATISFACTORY 

BENZOIC ACID UNSUITABLE UNSUITABLE UNSUITABLE NOT TESTED FREON REFER TO JOHN GUEST INC. NOT TESTED 

BORAX SATISFACTORY GOOD GOOD GOOD GELATIN NOT TESTED NOT TESTED NOT TESTED NOT TESTED 

BORIC ACID GOOD GOOD GOOD GOOD GLUCOSE GOOD GOOD GOOD GOOD 

BRAKE FLUID NOT TESTED NOT TESTED NOT TESTED NOT TESTED GLYCERIN GOOD GOOD GOOD NOT TESTED 

BRANDY NOT TESTED NOT TESTED NOT TESTED NOT TESTED HEPTANE NOT TESTED NOT TESTED NOT TESTED UNSUITABLE 

BROMINE WATER UNSUITABLE UNSUITABLE UNSUITABLE NOT TESTED HYDRAULIC FLUID NOT TESTED NOT TESTED NOT TESTED NOT TESTED 

BUFFER SOLUTION pH 4.0 UNSUITABLE UNSUITABLE NOT TESTED NOT TESTED 

HYDRAULIC FLUID FIRE 

RESISTANT 

NOT TESTED NOT TESTED NOT TESTED NOT TESTED 

BUFFER SOLUTION pH 7.0 NOT TESTED NOT TESTED NOT TESTED NOT TESTED 

HYDROBROMIDE ACID 

(HYDROBROMIC ACID) 

UNSUITABLE UNSUITABLE GOOD GOOD 

BUFFER SOLUTION pH 10.0 NOT TESTED NOT TESTED NOT TESTED NOT TESTED HYDROCHLORIC ACID 30% UNSUITABLE UNSUITABLE SATISFACTORY GOOD 

BUTANE NOT FOR USE WITH THIS SUBSTANCE NOT TESTED HYDROCHLORIC ACID 50% UNSUITABLE UNSUITABLE NOT TESTED GOOD 

BUTTER GOOD GOOD GOOD SATISFACTORY HYDROCYANIC ACID NOT TESTED NOT TESTED NOT TESTED GOOD 

BUTYL ACETATE UNSUITABLE SATISFACTORY SATISFACTORY POOR HYDROFLOURIC ACID - 40% UNSUITABLE UNSUITABLE GOOD GOOD 

BUTYL RUBBER NOT TESTED NOT TESTED NOT TESTED NOT TESTED HYDROFLOURIC ACID - 50% UNSUITABLE UNSUITABLE NOT TESTED GOOD 

24 

CALCIUM ARSENATE NOT TESTED NOT TESTED NOT TESTED NOT TESTED 

HYDROFLOURIC ACID - 

DILUTE 

UNSUITABLE UNSUITABLE GOOD GOOD 

CALCIUM BISULFITE NOT TESTED NOT TESTED NOT TESTED NOT TESTED HYDROGEN FLOURIDE UNSUITABLE UNSUITABLE NOT TESTED NOT TESTED 

CALCIUM CHLORIDE GOOD GOOD GOOD NOT TESTED HYDROGEN GAS NOT FOR USE WITH THIS SUBSTANCE GOOD 

CALCIUM HYPOCHLORITE UNSUITABLE UNSUITABLE GOOD GOOD HYDROGEN PEROXIDE 3% NOT TESTED UNSUITABLE SATISFACTORY NOT TESTED 

CALCIUM SALTS NOT TESTED NOT TESTED NOT TESTED NOT TESTED

CHEMICAL PM/PI RANGE CM/CI RANGE PP RANGE LLDPE TUBING CHEMICAL PM/PI RANGE CM/CI RANGE PP RANGE LLDPE TUBING 

HYDROGEN SULFIDE UNSUITABLE SATISFACTORY GOOD NOT TESTED SHELLAC NOT TESTED NOT TESTED NOT TESTED NOT TESTED 

IODINE (IN ALCOHOL SOLUTION) UNSUITABLE UNSUITABLE NOT TESTED NOT TESTED SILVER NITRATE SATISFACTORY SATISFACTORY NOT TESTED GOOD 

ISO-PROPANOL SATISFACTORY GOOD NOT TESTED GOOD SOAP SOLUTION GOOD GOOD GOOD SATISFACTORY 

KEROSENE SATISFACTORY UNSUITABLE UNSUITABLE UNSUITABLE SODIUM BICARBONATE 10% NOT TESTED NOT TESTED NOT TESTED GOOD 

LACTIC ACID 20% SATISFACTORY GOOD GOOD NOT TESTED SODIUM BISULFATE UNSUITABLE UNSUITABLE NOT TESTED GOOD 

LEAD ACETATE SATISFACTORY SATISFACTORY NOT TESTED GOOD SODIUM BISULFITE UNSUITABLE UNSUITABLE NOT TESTED GOOD 

LIME SULPHUR NOT TESTED NOT TESTED NOT TESTED NOT TESTED SODIUM BORATE GOOD GOOD NOT TESTED GOOD 

LINSEED OIL GOOD GOOD GOOD POOR SODIUM CARBONATE 10% GOOD GOOD GOOD GOOD 

LUBRICATION OIL (WITH 

MOLYBDENUM) 

NOT TESTED NOT TESTED NOT TESTED NOT TESTED SODIUM CHLORATE NOT TESTED NOT TESTED NOT TESTED NOT TESTED 

MACHINE OIL NOT TESTED NOT TESTED NOT TESTED GOOD SODIUM CHLORIDE 10% GOOD GOOD GOOD GOOD 

MAGNESIUM CHLORIDE SATISFACTORY SATISFACTORY NOT TESTED GOOD SODIUM CYANIDE SATISFACTORY SATISFACTORY NOT TESTED GOOD 

MAGNESIUM HYDROXIDE SATISFACTORY GOOD NOT TESTED GOOD 

MAGNESIUM SULFATE NOT TESTED NOT TESTED NOT TESTED GOOD 

SODIUM HYDROXIDE 

(CAUSTIC SODA SOLUTION) 

SODIUM HYPERCHLORITE 

(12.5 ACTIVE CHLORINE) 

SATISFACTORY GOOD GOOD NOT TESTED 

UNSUITABLE UNSUITABLE SATISFACTORY NOT TESTED 

MALEIC ACID UNSUITABLE UNSUITABLE UNSUITABLE GOOD SODIUM METAPHOSPHATE NOT TESTED NOT TESTED NOT TESTED NOT TESTED 

MANGANESE SALTS NOT TESTED NOT TESTED NOT TESTED NOT TESTED 

SODIUM NITRATE 10% 

pH 8.8 

GOOD GOOD GOOD GOOD 

MAYONNAISE NOT TESTED NOT TESTED NOT TESTED NOT TESTED SODIUM PERBORATE NOT TESTED NOT TESTED NOT TESTED NOT TESTED 

MERCURIC CHLORIDE UNSUITABLE UNSUITABLE NOT TESTED GOOD SODIUM PHOSPHATE NOT TESTED NOT TESTED NOT TESTED NOT TESTED 

MERCURY GOOD GOOD GOOD GOOD SODIUM SILICATE NOT TESTED NOT TESTED NOT TESTED NOT TESTED 

METHANOL NOT FOR USE WITH THIS SUBSTANCE GOOD SODIUM SULFATE NOT TESTED NOT TESTED NOT TESTED GOOD 

METHYL CHLORIDE UNSUITABLE UNSUITABLE UNSUITABLE POOR SODIUM SULFITE NOT TESTED NOT TESTED NOT TESTED GOOD 

MILK SATISFACTORY SATISFACTORY GOOD GOOD SODIUM THIOSULFATE NOT TESTED NOT TESTED NOT TESTED NOT TESTED 

MOTOR OIL NOT TESTED NOT TESTED NOT TESTED 

DEPENDS ON 

TYPE 

STEARIC ACID SATISFACTORY SATISFACTORY SATISFACTORY SATISFACTORY 

NATURAL GAS NOT FOR USE WITH THIS SUBSTANCE NOT TESTED SUCCINIC ACID NOT TESTED NOT TESTED NOT TESTED NOT TESTED 

NICKEL SALTS NOT TESTED NOT TESTED GOOD NOT TESTED SULFATE LIQUORS NOT TESTED NOT TESTED NOT TESTED NOT TESTED 

NITRIC ACID - CONCENTRATED UNSUITABLE UNSUITABLE UNSUITABLE UNSUITABLE SULFUR UNSUITABLE SATISFACTORY GOOD GOOD 

NITRIC ACID 10% UNSUITABLE UNSUITABLE SATISFACTORY GOOD SULFUR CHLORIDE UNSUITABLE UNSUITABLE UNSUITABLE NOT TESTED 

NITROBENZENE UNSUITABLE NOT TESTED NOT TESTED UNSUITABLE SULFUR DIOXIDE GAS UNSUITABLE UNSUITABLE GOOD GOOD 

NITROGEN OXIDES NOT TESTED NOT TESTED NOT TESTED NOT TESTED 

SULFURIC ACID - 

CONCENTRATED 

UNSUITABLE UNSUITABLE UNSUITABLE POOR 

NITROUS OXIDES UNSUITABLE UNSUITABLE NOT TESTED NOT TESTED SULFURIC ACID - 3% NOT TESTED GOOD GOOD NOT TESTED 

OLEIC ACID SATISFACTORY NOT TESTED NOT TESTED POOR SULFURIC ACID - 10% NOT TESTED SATISFACTORY GOOD GOOD 

OLIVE OIL GOOD SATISFACTORY SATISFACTORY GOOD SULFUROUS ACID UNSUITABLE UNSUITABLE NOT TESTED GOOD 

OXALIC ACID SATISFACTORY SATISFACTORY GOOD SATISFACTORY TANNIC ACID SATISFACTORY SATISFACTORY NOT TESTED SATISFACTORY 

OXYGEN SATISFACTORY SATISFACTORY NOT TESTED GOOD TAR SATISFACTORY UNSUITABLE UNSUITABLE NOT TESTED 

PALMITIC ACID SATISFACTORY SATISFACTORY NOT TESTED NOT TESTED TARTARIC ACID UNSUITABLE UNSUITABLE SATISFACTORY NOT TESTED 

PERCHLORIC ACID UNSUITABLE UNSUITABLE NOT TESTED SATISFACTORY TETRAHYDROFURAN UNSUITABLE NOT TESTED NOT TESTED UNSUITABLE 

PETROL SATISFACTORY UNSUITABLE NOT TESTED NOT TESTED TETRALIN NOT TESTED NOT TESTED NOT TESTED NOT TESTED 

PETROLEUM - REFINED NOT TESTED NOT TESTED NOT TESTED NOT TESTED THIOPHENE NOT TESTED NOT TESTED NOT TESTED NOT TESTED 

PETROLEUM OILS NOT TESTED NOT TESTED NOT TESTED NOT TESTED TOLUENE UNSUITABLE UNSUITABLE UNSUITABLE UNSUITABLE 

PHENOL UNSUITABLE NOT TESTED NOT TESTED NOT TESTED TOMATOES NOT TESTED NOT TESTED NOT TESTED NOT TESTED 

PHOSPHORIC ACID - CONCENTRATED UNSUITABLE GOOD GOOD NOT TESTED TRICHLOROETHANE UNSUITABLE UNSUITABLE UNSUITABLE UNSUITABLE 

PHOSPHORIC ACID 20 - 25% UNSUITABLE UNSUITABLE NOT TESTED NOT TESTED TURPENTINE SATISFACTORY UNSUITABLE UNSUITABLE UNSUITABLE 

PIRIC ACID - AQUEOUS UNSUITABLE UNSUITABLE NOT TESTED NOT TESTED UREA NOT TESTED NOT TESTED NOT TESTED GOOD 

PIRIC ACID - MOLTEN UNSUITABLE UNSUITABLE NOT TESTED NOT TESTED VARNISH SATISFACTORY UNSUITABLE UNSUITABLE NOT TESTED 

POTABLE WATER GOOD GOOD GOOD NOT TESTED VEGETABLE OIL SATISFACTORY SATISFACTORY SATISFACTORY NOT TESTED 

POTASSIUM HYDROXIDE - 50% SATISFACTORY GOOD GOOD GOOD VINEGAR SATISFACTORY SATISFACTORY GOOD GOOD 

POTASSIUM SALTS NOT TESTED NOT TESTED NOT TESTED NOT TESTED XYLENE UNSUITABLE UNSUITABLE UNSUITABLE UNSUITABLE 

PROPANE NOT FOR USE WITH THIS SUBSTANCE UNSUITABLE ZINC ACETATE SATISFACTORY SATISFACTORY NOT TESTED NOT TESTED 

PYRIDINE UNSUITABLE UNSUITABLE SATISFACTORY SATISFACTORY ZINC CHLORIDE UNSUITABLE UNSUITABLE NOT TESTED GOOD 

ROSIN, LIGHT NOT TESTED NOT TESTED NOT TESTED NOT TESTED ZINC SALTS NOT TESTED NOT TESTED GOOD GOOD 

SALT WATER GOOD GOOD GOOD NOT TESTED 

GOOD - Weight increase of less than 5%, or weight loss of less 

than 3%, and/or a change of the tensile properties of less than 25%. 

SATISFACTORY - Weight increase 5% to 10% or weight loss 3% 

to 5% and/or change of the tensile properties of 25% 40%. 

NOT TESTED - This combination has not been tested or reliable 

data is not available. 

POOR - This combination is not tested but may be suitable for very 

short term exposure (minutes). 

UNSUITABLE - Unsuitable for exposure to this material. 

Materials used in the construction of the fittings and tubing. 

PI/PM Range : Body- Acetal, Seals & o-rings - Nitrile, 

Collets - Acetal & Stainless Steel 

CM/CI Range : Body- Acetal, Seals & o-rings - EPDM, 

Collets - Acetal & Stainless Steel 

PP Range : Body- Polypropylene, Seals & o-rings - EPDM, 

Collets - Polypropylene & Stainless Steel 

NOTE : Ratings used in tables were generally assessed over a period of 30 days by our material suppliers and relate to 

chemicals being at a temperature of 20˚C (68˚F). 

Any change in temperature or pressure may change the “Rating” on the chemical compatibility. It is the responsibility of the 

customer to ensure suitablilty. John Guest U.S.A. Inc. is not responsible for the correctness or interpretations of this chart. 

25

cts SIZES 

THE PUSH-FIT SOLUTION FOR 

PLUMBING AND HEATING SYSTEMS 

JG Speedfit ® is an advanced push-in fitting featuring 

twist & lock technology that is suitable for the plumbing 

of normal domestic hot and cold water lines, including 

pressurized and combination systems. 

Speedfit ® Fittings have been designed for use with 

Copper Pipe, Speedfit ® Pex Pipe, CPVC, and other 

PEX Pipe conforming to US Plumbing Standards. 

Performance specifications are well within those required 

for most normal domestic water supply systems 

including: 

• Main water supply line and indirect cold water systems 

• Vented and un-vented hot water systems 

• Vented central heating systems 

Extensive tests have shown that Speedfit ® products 

will withstand temperatures and pressures in excess of 

normal working conditions. 

JG Speedfit ® should be installed to conform with good 

plumbing practice. 

The products in this catalog should not be used for 

gas, fuel oil, or compressed air applications. 

Installation Benefits: 

• Works with copper, CPVC, and PEX 

• No tools required 

• Installation time reduced by 40% 

• Grip and seal connection 

• Superseal ® Insert gives a secondary seal 

• Reduced pipe insertion force 

• Disassemble without damage to pipe or fitting 

• Easy to use in confined spaces 

Performance: 

• Twist & lock for added security 

• Approved for behind-the-wall installations 

• Corrosion free 

• No scale buildup 

• Pipe flexibility permits the cabling of pipe through 

less accessible areas 

• No blowtorch required 

• A permanent leak-proof connection 

• Lower thermal diffusivity maintains safer surface 

temperature 

• Pipe elasticity can reduce the possibility of bursting 

under freezing conditions 

• Lead-free and non-toxic 

• Less noise from water flow and expansion/contraction 

• Long pipe lengths require fewer fittings 

SPECIAL APPLICATIONS: 

Boats: The flexibility of the Speedfit ® System ensures 

it can be cabled easily around the interior and hidden 

from view. 

RV: Speedfit ® is ideal for RV installations due to its 

flexibility and its resistance to corrosion and freezing. 

Exhibitions: The unique ability of the Speedfit ® System 

to be easily disassembled and reused, together with its 

flexibility, makes Speedfit ® ideal for this application. 

Portable Buildings (offices, toilets): As with RV’s, 

Speedfit ® is well suited for these applications. 

Agricultural and Horticultural: Speedfit ® has many applications 

in agricultural and horticultural environments. 

26

Table of Contents for Speedfit Inch Products 

For Industrial Products refer to Table of Contents on page 1 

For Speedfit Metric Products refer to Table of Contents on page 37 

Standard Speedfit Fittings 

CTS SIZES 

PEI Fittings White plastic Twist & Lock fittings for use with domestic 32-33 

hot and cold water lines 

MWI & WBI Fittings Brass push-in fittings for use with domestic hot and cold 33 

water lines 

Special Speedfit Products 

NC Fittings White plastic Twist & Lock fittings for use with hot and cold 35 

water lines 

NC Valves White plastic push-in straight shut-off valve; left and right hand 35 

by-pass (Tee) valves for use with hot water & cold water lines. 

Speedfit Inch Products 

Pipe and Accessories 

US Pipe PEX pipe in coil and straight lengths, pipe inserts 34 

Accessories Nail clips, pipe clips, pipe cutters and blades 35 

Other 

How to Make a Speeedfit Connection 28 

Working Pressures and Temperatures 30 

Technical Checklist 31 

Index 43-44 

ASTM F877-05 CSA B137.5 ASSE 1061 

27

MAKING A GOOD CONNECTION: 

Copper Pipe O-ring Spacer Collet Speedfit Pipe 

with Pipe Insert 

HOW TO MAKE A CONNECTION 

Fittings and pipe should be kept clean, bagged, and 

undamaged before use. 

TWIST AND LOCK FITTINGS 

Gap between Cap and Flange (unlocked) 

Stainless Steel Teeth 

Like our Standard Fittings, Twist and Lock Fittings have 

a collet with stainless steel teeth that grip the pipe when 

fully inserted, and an o-ring to provide a permanent 

leak-proof seal. The additional benefit of the Twist and 

Lock fitting is that a twist of the screw-cap gives greater 

compression on the o-ring seal and locks pipe in place 

for greater security. 

Prepare the Pipe 

Speedfit Pipe 

The fitting should be in the ‘unlocked’ position. This is 

shown by a small gap between the screw-cap and the 

body flange. 

Pipe Stop O-ring Collet 

PipeCutter 

JGHDC 

Washer 

Push the pipe into the fitting and up to the pipe stop. 

To prevent damage to the o-ring remove all burrs and 

sharp edges. When using Speedfit ® pipe, we recommend 

the use of Superseal Pipe Inserts. The insert 

should only be used with Speedfit ® Pipe. 

Stem of the pipe insert 

Spacer 

Twist the screw-cap until it touches the body flange. 

This locks the pipe into position and increases the 

o-ring seal around the pipe. 

Push pipe to pipe stop 

No Gap (locked) 

The stem of the insert gives greater rigidity to the length 

of pipe within the fitting, reducing the chance of leaks if 

a side load is applied. 

28 

Pull to check that it is secure. It is good practice to test 

the system prior to leaving the site or before use. Our 

recommended test procedure is shown in our Technical 

Checklist.

CTS SIZES 

TO DISCONNECT: 

Ensure that the system is depressurized. 

Be sure to twist the screw-cap back to the unlock 

position. 

End Cap 

The unique feature of 

the Speedfit ® concept 

is the ability to easily 

connect and disconnect 

the End Cap. End Caps 

also provide a leak-proof 

seal. 

They can be used to 

temporarily “cap-off” installations 

for pressure 

testing and rough inspections. 

With Speedfit ® End Caps there is no need for tools, 

sweating or threading. They can be used with plastic or 

copper pipe, and are reusable many times over. 

Superseal pipe insert 

Push the collet square against the face of the fitting by 

using fingers. With the collet held in this position the 

pipe can be removed. 

The fitting can be used again without the need for 

replacement parts. (Ensure the fitting is clean before 

every use). 

Pipe insert provides 

a secondary seal 

Main O-ring 


grip the pipe 

Washer 

O-rings 

WHAT NOT TO DO 

• Don’t use damaged or scored pipe 

• Don’t use a hacksaw to cut the pipe 

• Don’t leave burrs on the end of the pipe 

• Don’t forget to push the pipe fully into the fitting, past 

both the collet (gripper) and the o-ring. 

• Do not insert fingers into the fitting as the stainless 

steel teeth may cause injury. 

Remember to pressure test the completed installation 

according to the recommendations in our Technical 

Checklist. 

The Superseal pipe insert has been developed for use 

with Speedfit ® Pipe and Speedfit ® Fittings to provide 

an extra line of defense when installing a Speedfit ® 

Push Fit System. 

An o-ring at the head of the insert provides a secondary 

seal inside the fitting. A combination of this and the 

fitting o-ring ensures an even better connection. 

The Speedfit ® Connection, when made with the Superseal 

insert, has some innovative design and installation 

features: 

Sliding the stem of the insert into the pipe gives greater 

rigidity to the length of the pipe within the fitting, reducing 

the chance of leaks if a side load is applied. 

A connection is easier to make because the head of the 

insert has been designed for ease of insertion. 

29

STANDARDS AND AFFILIATIONS: 

Speedfit ® complies with the applicable 

sections of the latest edition of the Uniform 

Plumbing Code ® and the International 

Plumbing Code ® , including behind-thewall 

installations. 

Refer to the applicable code listings for the latest 

information. 

Speedfit ® products are manufactured in compliance 

with ASTM F 877-05, CSA B137.5, and ASSE 1061. 

Speedfit ® fittings & pipes have NSF/ 

PW rfh 

ANSI Standard 14 which demonstrates 

compliance with USA Plumbing Codes, 

cNSFus – which complies with Canada 

and US Standards, CSA – Canadian Standards, pw – 

potable water, rfh – radiant floor heating, and NSF Standard 

61 Certification for Drinking Water System Components 

and Materials which contact drinking water. 

John Guest quality systems have been approved 

by the BSI EN ISO 9001. 

The Genuine JG symbol represents our commitment 

to our customers, and what the John 

Guest name means to business: Quality, Reliability, 

and Support. 

HANDLING PIPE AND FITTINGS: 

Ensure that the fittings and pipe are kept clean at all 

times by keeping them in the bags and box provided. 

Do not empty Speedfit ® products onto the floor area. 

Be sure to keep the internal o-ring seals free from dirt 

and debris. 

PRODUCT SELECTION AND 

INSTALLATION: 


designed and manufactured by John Guest to the technical 

specifications set out in the John Guest Product 

Catalogs. All John Guest fittings and related products 

should be selected, installed, used, and maintained in 

accordance with these Technical Specifications. It is 

the customer’s/user’s responsibility to ensure that John 

Guest fittings and related products are suitable for their 

intended applications, are properly installed and maintained, 

and are used in accordance with the Technical 

Specifications. It is also the customer’s/user’s responsibility 

to provide its own customers with any relevant 

technical information about John Guest products it supplies 

them. 

Speedfit ® should not be used for gas, fuel oil or 

compressed air applications. 

John Guest produces a specially designed push fit system 

of pipe and fittings for compressed air installations. 

See separate literature for details. 

The Speedfit ® System is approved 

by the Water Regulations Advisory 

Scheme for the UK. 

Working pressures and 

temperatures: 

Application Max. Working Max. Working 

Pressure 

Temperature 

Water 160 psi 73° F 



30

TECHNICAL CHECKLIST 

INCH SIZE PLUMBING AND 

HEATING FITTINGS 

Fittings and pipe should be kept clean and undamaged before 

use. 

• Sizes: 1/2” to 1” CTS. 

• Pipes: Speedfit ® fittings can be used with: PEX, Copper 

and CPVC Pipes conforming to ASTM Standards. 

Speedfit ® fittings cannot be used on stainless steel pipe. 

• Standards: Speedfit ® products are designed and manufactured 

under a fully integrated system assessed by B.S.I. 

to BS EN ISO9001. Speedfit ® PEI Fittings and Speedfit ® 

PEX Pipe are also NSF-14, UPC, and CSA approved. 

• Do not use for gas, fuel oil or compressed air 

applications. 

• Working pressures and temperatures: 

Application Max. Pressure Max. Temperature 




• Burst Pressure (fittings): With copper or plastic pipe at 

68° F, Speedfit ® fittings used with copper or Speedfit ® Pex 

Pipe will withstand pressures well in excess of normal service 

conditions. 

• Insulation: Should comply with applicable standard for 

copper. 

• Minimum bend radius (PEX): 

Pipe diameter 1/2" CTS 3/4" CTS 

Min radius 7" 9" 

• Clip spacing (in inches): 

For surface mounted pipes. 

Clip Spacing 

Pipe Diameter Horizontal Run Vertical Run 

1/2" CTS 16 inches 20 inches 

3/4" CTS 20 inches 30 inches 

1" CTS 30 inches 36 inches 

• Expansion (PEX Pipe): 1% on length between 68° F and 

180° F. 

• Flow rates: Comparable with metal systems. 

• Cleaners, inhibitors and descalents: For advice on the 

use of additives such as corrosion inhibitors, the additive 

manufacturers should be consulted 

• Paint and Chemicals: Use only water-based paint. DO 

NOT ALLOW CONTACT WITH oil-based jointing compounds, 

cellulose-based paints, paint thinners, paint strippers, 

solder flux, acid-based descalents or aggressive 

cleaning products. 

• Solder Flux: No fluxes of any type should come into 

contact with Speedfit ® products. Extreme care should be 

taken to ensure that no such contact takes place. 

• Chlorine: Speedfit ® is not suitable for use in systems 

where the water contains high levels of chlorine, e.g. swimming 

pools, fountains, etc. 

• Exposure to light: Speedfit ® products, when used indoors, 

are not affected by sunlight. When used outdoors, 

protect from ultraviolet light by lagging or painting. 

CTS SIZES 

• Pipe clips: Pipe clips should not be fitted any closer than 2 1/2 

inches from the end of the fitting. Pipe should be adequately 

supported by pipe clips to prevent undue stress (side load) on 

fittings. 

• Pipe inserts: 

Plumbing: John Guest recommends the use of pipe 

inserts for PEX pipe connections with John Guest 

Speedfit ® products in Standard Residential Plumbing (hot 

and cold water) installations. 

Heating: John Guest requires the use of pipe inserts for 

PEX pipe connections with John Guest Speedfit ® products 

in all Heating installations. 

• Metal Joists: When ‘cabling’ plastic pipe through metal 

joists, ensure rubber grommets are in place to prevent 

damage to the pipe. 

• Connection to boilers: A minimum 36 inches run of copper 

pipe must be installed between the boiler and the 

Speedfit ® system. 

• Connection to copper pipe: 18 inches is the minimum 

distance to make a solder connection on copper pipe inserted 

into a Speedfit ® fitting. Ensure that no solder flux 

comes into contact with the fitting. 

• Concrete and masonry: Speedfit ® pipe and fittings can 

be laid in concrete and masonry providing they are installed 

in conduit pipe with access boxes for the fittings. 

This is to enable the pipe to expand and provide accessibility 

for both pipe and fittings. Fittings and pipe should 

be removable for possible replacement. Insulation is also 

recommended to protect against heat loss and the effects 

of frost. 

• Electrical Continuity: If Speedfit ® is used in an existing 

metal system, electrical continuity must be reinstated. 

• System Testing: To ensure the pipework and fittings have 

been installed correctly, whether it be on a new or extended 

system, it is essential that the system be checked and 

hydraulically wet tested. Testing should be at 30 psi for 10 

minutes and 150 psi for 10 minutes. This testing, combined 

with other relevant checks, should reveal installation problems 

and is regarded as good plumbing practice. However, 

system testing should not be regarded as a substitute for 

correct installation (see also “Making a Good Connection”). 

• System flushing: As is usual practice for any plumbing 

installation, flushing of the system prior to the use of 

Speedfit ® is recommended to remove any contaminants/ 

chemical residue from elsewhere in the system. 

• Vermin: Speedfit ® products will need special protection in 

vermin infested areas. 

Tube Insertion Depths: 

Twist and Lock Fittings 1/2" CTS 3/4" CTS 1" CTS 

Tube Insertion Depth 1 1/4" 1 5/8" 1 5/8" 

End Caps 1/2" CTS 3/4" CTS 1" CTS 


Brass Fittings 1/2" CTS 3/4" CTS 1" CTS 


John Guest USA, Inc., is not responsible for misprints 

or typographical errors. 

31

PLUMBING FITTINGS 

UNION TEE 

REDUCING TEE 

Part No. 

Size (CTS) 

PEI0220 1/2" 

PEI0228 3/4" 

PEI0236 1" 

Part No. 

Size (CTS) 

PEI3028A 3/4" x 3/4" x 1/2" 

PEI3028B 3/4" x 1/2" x 1/2" 

PEI3028C 1/2" x 1/2" x 3/4" 

PEI3028D 3/4" x 1/2" x 3/4" 

UNION ELBOW 

Sizes for Reducing Tee are listed in the following 

order 

Part No. 

Size (CTS) 

PEI0320 1/2" 

PEI0328 3/4" 

PEI0336 1" 

1 2 

3 

end cap 

COUPLER 

Part No. 

Size (CTS) 

PEI0420 1/2" 

PEI0428 3/4" 

PEI0436 1" 

Part No. 

Size (CTS) 

PEI4620 1/2" 

PEI4628 3/4" 

PEI4636 1" 

Ideal for temporarily capping 

off pipes. 

Reducer 

Part No. 

Size (CTS) 

PEI062820 3/4" Stem x 1/2" Pipe 

PEI063628 1" Stem x 3/4" Pipe 

Slim Profile End Cap 

Part No. 

Size (CTS) 

PSEI4620 1/2" 

PSEI4628 3/4" 

PSEI4636 1" 

STEM ELBOW 

Part No. 

PEI222020 

PEI222828 

Size (CTS) 

1/2" Stem x 1/2" Pipe 

3/4" Stem x 3/4" Pipe 

Provides a swivel type 

connection 

Easy to Connect 

Easy to Disconnect 

32

CTS SIZES 

Stackable Tee 

Part No. 

Size (CTS) 

PEI532020 1/2" x 1/2" x 1/2" 

PEI532820 3/4" x 3/4" x 1/2" 

PEI532828 3/4" x 3/4" x 3/4" 

New 

FEMALE BALLCOCK ELBOW 

Part No. 

Size (CTS X 

Ballcock Thread) 

PEIBTC20C75 1/2" CTS x 7/8"-15/16" UNS 

Sizes for Stackable 

Tee are listed in the 

following order 

Connects to toilet fill valve. 

BRASS MALE CONNECTOR 

Part No. Size (CTS X NPT) 

MWI012024 1/2" CTS x 1/2" NPT 

MWI012826 3/4" CTS x 3/4" NPT 

Ideal for multi-port manifold 

FEMALE SWIVEL Connector 

Part No. Size (CTS X NPS) 

PEISTC2034 1/2" CTS x 1/2" NPS 

BRASS MALE STEM ADAPTER 


MWI052024 1/2" CTS x 1/2" NPT 

MWI052826 3/4" CTS x 3/4" NPT 

BRASS feMALE STEM ADAPTER 

FEMALE SWIVEL ELBOW 

Part No. Size (CTS X NPS) 

PEIBTC2034 1/2" CTS x 1/2" NPS 

Part No. 

Size (CTS X NPSM) 

MWI502034 1/2" CTS x 1/2" NPSM 

New 

FEMALE BALLCOCK CONNECTOR 

Part No. 

Size (CTS X 

Ballcock Thread) 

PEISTC20C75 1/2" CTS x 7/8"-15/16" UNS 

BRASS FEMALE DROP EAR ELBOW 


WBI2024 1/2" CTS x 1/2" NPT 

Connects to toilet fill valve. 

33

PIPE AND INSERTS 

PEX PIPE 

PIPE INSERT 

Part No. 

Size (CTS) 

US1/2PEX-100F-W 1/2" x 100' 

US3/4PEX-100F-W 3/4" x 100' 

Part No. 

Size (CTS) 

TSI20 1/2" 

TSI28 3/4" 

TSI36 1" 

Pipe Inserts should only be used 

with Speedfit ® Fittings. 

Coil Pipe in 100' Lengths 

Pipe is also available in Red 

or Blue 

W-denotes white color pipe 

For Red and Blue pipe use 

suffix R or B 

New 

Part No. 

Size (CTS) 

US1/2PEX-10X10-W 1/2" 

US3/4PEX-10X10-W 3/4" 

* US1PEX-10X10-W 1" 

Bundles of ten 10-foot lengths are also available in Red 

or Blue. 

W-denotes white color pipe 

For Red and Blue pipe use suffix R or B 

*Availability pending approval. 

SUPERSEAL PIPE INSERT 

Part No. 

Size (CTS) 

STSI20 1/2" 

STSI28 3/4" 

To be used only with Speedfit ® Pipe and Speedfit ® 

Fittings to enhance the sealing security of the connections. 

34

CTS SIZES 

Products on this page are not listed with IAPMO. 

New 

STRAIGHT SHUT-OFF VALVE 61 

Part No. 

NC2390 

Size (CTS) 

1/2” CTS 

ACCESSORIES 

Nail cLIP 

Part No. 

Size (CTS) 

NPCI20 1/2" 

NPCI28 3/4" 

New 

BY-PASS VALVES 61 

Part No. 

Size (CTS x 

3 Way By-pass) 

NC2391-RH 1/2" CTS x 3 Way By-Pass 

NC2391-LH 

1/2" CTS x 3 Way By-Pass 

PIPE clip 

Part No. 

Size (CTS) 

USCLIP20 1/2" 

USCLIP28 3/4" 

New 

PIPE CUTTER 

Part No. 

JG-TS 

MALE CONNECTOR NPTF Thread 61 

New 

REDUCER 61 

Part No. Size (CTS x NPTF) 

NC2394 1/2" x 1/2" NPTF 

NC2384 3/4" x 3/4“ NPTF 

NC2420 1/2" x 3/4" NPTF 

NC2421 1" x 3/4" NPTF 

NC2422 1" x 1" NPTF 

Part No. Size (CTS x TUBE OD) 

PP062008W 1/2" CTS x 1/4" O.D. 

PP062012W 1/2" CTS x 3/8" O.D. 

PP062016W 1/2" CTS x 1/2" O.D. 

HEAVY DUTY PIPE CUTTER 

Part No. 

JG HDC 

BLADE JGHDC 

35

METRIC SIZES 

THE PUSH-FIT SOLUTION FOR 

PLUMBING SYSTEMS 

John Guest plumbing push-fit fittings and pipe have 

been designed for the plumbing of hot and cold water 

service. Whether your application is for fresh water, raw 

water, gray water, or potable water; John Guest push-fit 

fittings and pipe meet the high demands of the Marine 

Industry. 

STANDARDS AND AFFILIATIONS 

With John Guest plumbing 

products you can expect: 

• Reductions in time and labor costs 

• No tools required 

• Efficient, quick connections (even in tight working 

spaces) 

• Quick disconnections; can be used many times 

• Suitable for Speedfit ® PEX pipe, copper pipe and 

other good quality plastic pipes. 

• No clamps or compression nuts to loosen due to 

vibration 

• No sweating required 

• Lightweight and easy to handle 

• Use with hot or cold water 

• Superior flow characteristics 

• Lead free and non toxic 

John Guest plumbing products should be installed to 

conform with good plumbing practice. 

The products in this catalog should not be used for 

gas, fuel oil, compressed air applications, or residential 

plumbing. 

36

Table of Contents for Speedfit Metric Products 

For Industrial Products refer to Table of Contents on page 1 

For Speedfit Inch Products refer to Table of Contents on page 27 

Speedfit Fittings 

METRIC SIZES 

PEM Fittings White plastic Twist & Lock fittings for use with hot and 39-40 

cold water lines. 

CM Connector Gray plastic push-in tank connector suitable for cold water lines 39 

PSE Fitting White plastic push-in End Cap for use with hot and cold water lines 39 

NC Connectors Gray plastic push-in conversion connectors for use with hot and 40 

cold water lines 

CM Connector Gray plastic push-in connector designed to connect pipe where 40 

there is no lateral movement 

Brass Fittings 

Speedfit Metric Products 

MWI Fittings Brass push-in fittings suitable for use with hot and cold water lines 41 

Valves and Manifolds 

SFM Manifolds Gray push-in 4-way and Port Manifolds suitable for hot and cold 40 

water lines 

BSC and HSV Brass push-in Stop and Service Valves suitable for hot and 41 

Brass Valves 

cold water Lines 

HSV and PTSV Brass Chrome plated push-in Service Valve and valve with Tap 41 

Valves 

Connector suitable for hot and cold water lines 

APT and ESOT Tap White plastic push-in Washing Machine and Emergency Shut-Off Tap 41 

DCV and ISV Gray plastic push-in Check and Service valves 41 

STV valve White plastic push-in Stop Valve 41 

JG Rail Brass push-in 4,6, and 12 zone manifolds suitable for hot and cold 41 

Manifold 

water lines 

JGMAN Manifold Brass push-in 2 and 3 port manifolds with blanking plug 41 

Pipe and Accessories 

BPEX Pipe White Plastic pipe in coils and straight lengths 42 

Accessories Pipe Inserts, Collet Covers, Release Aids, Locking/ID Clips, Nail Clip, 42 

Pipe Clip and Spacers, Conduit Pipe, Cold Forming Bend, Pipe 

Cutters and Blades 

Other 

Technical Checklist 38 

Index 43-44 

37

TECHNICAL CHECKLIST 

METRIC SIZE PLUMBING FITTINGS 

Fittings and pipe should be kept clean and undamaged before 

use. 

Do not use for gas, fuel oil or compressed air applications. 

• Sizes: 10mm to 28mm outside diameter. 

• Pipes: Speedfit ® fittings can be used with: Speedfit ® PEX 

Pipe, Copper pipe and other good quality plastic pipe 

Speedfit ® fittings cannot be used on stainless steel pipe. 

• Working temperatures and pressures: 

Application Max. Pressure Max. Temperature 

Hot water 87 psi 150° F 

Cold water 175 psi 68° F 

• Burst Pressure (fittings). With copper or plastic pipe at 

68°F. Speedfit ® fittings used with copper or Speedfit ® 

(PEX) barrier pipe will withstand pressures well in excess 

of normal service conditions. 

• High temperatures: Can withstand 237°F intermittently 

for short periods. 

The Speedfit ® system should not be used on an uncontrolled 

heat source. 

• Minimum bend radius (BPEX): 

Pipe diameter 10mm 15mm 22mm 28mm 

Min radius with clips 4" 7" 9" 12" 

Min radius with cold 

forming bend 

1 1/4" 3" 4 1/2" 

• Clip spacing (in mm): 

For surface mounted pipes 

Clip Spacing 

Pipe Diameter Horizontal Run Vertical Run 

10-15mm 16 inches 20 inches 

22mm 20 inches 32 inches 

28mm 32 inches 40 inches 

• Expansion (PEX pipe): 1% on length between 68°F and 

180°F. 

• Flow rates: Comparable with metal systems. 

• Paint and Chemicals: Use only water paint. Collet covers 

prevent paint ingress into fittings. DO NOT ALLOW CON- 

TACT WITH cellulose based paints, paint thinners or strippers, 

solder flux or acid based descalents or aggressive 

cleaning products. 

• Exposure to sunlight: Speedfit ® products, when used 

indoors, are not affected by sunlight. When used outdoors 

protect from ultraviolet light by lagging or painting. 

• Pipe clips: Pipe clips should not be fitted any closer than 

2-1/2” from the end of the fitting. Pipe should be adequately 

supported by pipe clips to prevent undue stress (side 

load) on fittings. 

• Pipe inserts: Must be used on all installations when using 

plastic pipe and should be fully inserted. 

• Connection to copper pipe: 18" is the minimum distance 

to make a solder connection on copper pipe inserted into a 

Speedfit ® Fitting. Ensure that any residual flux and solder 

does not come into contact with the fitting. 

• Valves and Taps: Plastic 15mm and 22mm valves and 

taps available from John Guest are not suitable for central 

heating installations. 

• Collet Covers/Locking Clips: Collet covers and locking 

clips provide added security against pipe disconnection, 

e.g. the fittings coming into contact with rigid surfaces 

and behind dry-lining walls. Collet Covers are available in 

white, or in red or blue to allow for color coding of pipes. 

Locking clips are available in gray. 

• Residential Plumbing: John Guest metric range of 

plumbing fittings are not approved for use for residential 

plumbing. 

• System testing: To ensure the pipework and fittings have 

been installed correctly, whether it be on a new or extended 

system, it is essential that the system is checked and 

hydraulically wet tested. Testing should be at 30 psi for 10 

minutes and 150 psi for 10 minutes. This testing, combined 

with other relevant checks, should reveal installation problems 

and is regarded as good plumbing practice. However, 

system testing should not be regarded as substitute for 

correct installation (see Making a Good Connection). 

• System flushing: As is usual practice for any plumbing 

installation, flushing of the system prior to the use of 

Speedfit ® is recommended to remove any contaminants/ 

chemical residue from elsewhere in the system. 

• Maximum Torque Figures (BSP & BSPT & NPT): The 

maximum torque figures for BSP, BSPT, and NPT threads 

used on Speedfit ® plumbing products in mating threads 

conforming to relevant BS or International thread standards. 

Threads Size Maximum Torque 

Plastic 

Brass 

1/2" 3.0 Nm 

3/4" 4.0 Nm 

1/2" 4.0 Nm 

3/4" 5.0 Nm 

It is recommended that all installations are checked prior 

to use to determine that a seal has been made. 


designed and manufactured by John Guest to the 

Technical Specifications set forth in John Guest’s Product 

Catalogs. All John Guest fittings and related product 

should be selected, installed, used and maintained in 

accordance with these Technical Specifications. It is the 

customer/user’s responsibility to ensure that John Guest 

fittings and related products are suitable for their intended 

applications, are properly installed and maintained, and 

are used in accordance with Technical Specifications. It is 

also the customer’s/user’s responsibility to provide its own 

customers with any relevant technical information about 

John Guest products it supplies to them. If you would like 

to request a copy of the Technical Specifications, or if you 

have any questions about those Specifications, please 

contact John Guest USA at 1 (800) 945 4872, or visit the 

John Guest website at www.johnguest.com 

38

METRIC SIZES 

METRIC PLUMBING 

FITTINGS 

John Guest Speedfit ® reserve the 

right to change the color and shape 

of products. Photographs are for illustration 

purposes only. 

Union Elbow 

Part No. 

Pipe OD (mm) 

PEM0310W 10 

PEM0315W 15 

PEM0322W 22 

PEM0328W 28 

Reducer 

Part No. 

Stem OD Pipe OD 

mm mm 

PEM061510W 15 x 10 

PEM062215W 22 x 15 

PEM062815W 28 x 15 

PEM062822W 28 x 22 

TWIST AND LOCK FITTINGS 

‘O’ ring 

Collet 

Plug-in Elbow 

Tank Connector 

Copper pipe 


Speedfit Pipe with 

Superseal Pipe Insert 

Part No. 

Pipe OD Stem OD 

mm mm 

Part No. 

Pipe OD (mm) 

STANDARD FITTINGS 

‘O’ ring 

Collet 

PEM221010W 10 10 

PEM221515W 15 15 

PEM222222W 22 22 

Please note a Collet Cover cannot be 

used on a Speedfit end assembled 

with the stem of a 22mm Stem Elbow. 

CM0715S 15 

CM0722S 22 

CM0728S 28 

Suitable for cold water tanks only 

Copper pipe 


Speedfit Pipe with 


Standard Speedfit Fittings have a collet with stainless 

steel teeth to grip the pipe and an ‘O’ ring to 

provide a permanent leakproof seal. 

Provides a swivel 

type connection 

Requires hand 

tightening only. 

The additional benefit of Twist and Lock Fittings is 

that a twist of a screwcap locks the pipe in position 

and gives greater compression on the ‘O’ ring 

for even greater security. 

Union Tee 

End Cap 

Union Connector 

Part No. 

Pipe OD (mm) 

PEM0410W 10 

PEM0415W 15 

PEM0422W 22 

PEM0428W 28 

Part No. 

Pipe OD (mm) 

PEM0210W 10 

PEM0215W 15 

PEM0222W 22 

PEM0228W 28 

Part No. 

Pipe OD (mm) 

PSE4610W 10 

PSE4615W 15 

PSE4622W 22 

Reducing Tee 

Reducing Union Connector 

Part No. 

Pipe OD (mm) 

PEM201510W 15 x 10 

PEM202215W 22 x 15 

Sizes listed as follows. 

1 2 

3 

Part No. 

Pipe OD (mm) 

PEM3015AW 15 x 15 x 10 

PEM302210AW 22 x 22 x 10 

PEM3022AW 22 x 22 x 15 

PEM3015BW 15 x 10 x 10 

PEM3022BW 22 x 15 x 15 

PEM3022CW 15 x 15 x 22 

PEM3022DW 22 x 15 x 22 

PEM3028AW 28 x 28 x 22 

PEM3028BW 28 x 22 x 22 

PEM3028DW 28 x 22 x 28 

39

Straight Tap Connector 

Plug 

Part No. Pipe OD Thread 

mm BSP 

PEMSTC1514 15 x 1/2" 

PEMSTC1516 15 x 3/4" 

PEMSTC2216 22 x 3/4" 

With brass swivel nut and sealing washer. 

For torque figures see Technical Checklist. 

Bent Tap Connector 


mm BSP 

PEMBTC1514 15 x 1/2” 

With brass swivel nut and sealing washer. 

For torque figures see Technical Checklist. 

Part No. 

Pipe OD (mm) 

PL10 10 

PL15 15 

PL22 22 

PL28 28 

Conversion Union 

Connector 

Connects imperial to metric pipe 

Part No. 

NC471 

Pipe OD Pipe OD 

5/8” x 15mm 

FLEXI HOSES 

Flexi Hose 

300mm long 

500mm long 


mm BSP 

FLX15 15 x 1/2" 

FLX16 15 x 3/4" 

FLX22 22 x 3/4" 

FLX18 15 x 1/2" 

FLX20 15 x 3/4" 

FLX19 22 x 3/4" 

FLX23 22 x 3/4" 

Full Bore 

Hot and Cold water only, 150°F maximum 

Flexi Hose 

4 Way Manifold 

Part No. Pipe OD (mm) 

SFM512210S 22 x 10 

Conversion Union 

Connector 

Connects imperial to metric pipe 

Part No. 

NC462 


1/2” OD x 15mm 

300mm long 

500mm long 

Part No. 


mm mm 

FLX17 15 x 15 

FLX26 22 x 22 

FLX21 15 x 15 

FLX27 22 x 22 

4 Port Rail Manifold 

Slip Connector 

Part No. 

CM-SC-15S 15 

Pipe Od (mm) 


Used to connect pipes where there is no 

lateral movement. Pipe passes through 

this fitting to allow connection where lateral 

movement is restricted. 

Flexi Hose with 

Service Valve 

300mm long 

500mm long 


mm BSP 

FLX24 15 x 1/2" 

FLX25 22 x 3/4" 

FLX31 15 x 1/2" 

FLX32 22 x 3/4" 

Part No. 

Pipe OD (mm) 

SFM522210S 22 x 10 

SFM522215S 22 x 15 

Barb Connector 

Part No. 

Pipe OD Hose ID 

mm inch 

NC448-3/8 15mm x 3/8" 

NC448 15mm x 1/2" 

NC473 22mm x 3/4" 

NC737 22mm x 1/2" 

40

BRASS FITTINGS 

Brass Male Connector 

Brass Manifold 

METRIC SIZES 

Double Check Valve 


mm 

MW011504N 15mm x 1/2" BSPT 

MW012206N 22mm x 3/4" BSPT 

MW012808N 28mm x 1" BSPT 

10MC (1/2) 10mm x 1/2" BSP 

15MC (1/2) 15mm x 1/2" BSP 

22MC (3/4) 22mm x 3/4" BSP 

MW012818N 28mm x 1" BSP 

Each manifold supplied with a 

blanking plug. 

Part No. Description Size 

bsp x mm 

Red Handle 

JGMAN2-R 

JGMAN3-R 

JGMAN4-R 

Blue Handle 

JGMAN2-B 

JGMAN3-B 

JGMAN4-B 

2 PORT 3/4" x 15mm 

3 PORT 3/4" x 15mm 

4 PORT 3/4" x 15mm 

2 PORT 3/4" x 15mm 

3 PORT 3/4" x 15mm 

4 PORT 3/4" x 15mm 

Part No. Pipe OD (mm) 

15DCV 15 


Plastic Service Valve 

Brass Male Stem Adapter 


mm 

General Description 

Blanking plug supplied with each manifold. 

Control knobs have the means to be labeled 

“Basin”, “Sink”, “Shower”, “Toilet”, “Bidet” or 

“Washing Machine”. 

Part No. 

Pipe OD (mm) 

15ISV 15 


Converts Speedfit to male thread 

MW051504N 15 x 1/2" BSPT 

MW052206N 22 x 3/4" BSPT 

MW052818N 28 x 1” BSP 

MM052226N 22 x 3/4" NPT 

MM052228N 22 x 1" NPT 

MM052828N 28 x 1" NPT 

VALVES 

Stop Valve 

Brass Service Valve 

Part No. 

Pipe OD (mm) 

Part No. 

Pipe OD (mm) 

15HSV-BRASS 15 

Brass Female 

Stem Adapter 

15STV 15 

22STV 22 


Converts Speedfit to 

female thread 

Brass Male 

Cylinder Adapter 


mm BSP 

MW501514N 15 x 1/2" 

MW502216N 22 x 3/4" 

Brass Stop Valve 

Part No. 

Pipe OD (mm) 

15BSC 15 

Suitable for central heating only. 

Brass Chrome Plated 

Service Valve 

Part No. 

Pipe OD (mm) 

10HSV 10 

15HSV 15 

22HSV 22 


mm BSP 

22CMA 22 x 1" 

Suitable for central heating systems. 

Washing Machine Tap 

Brass Chrome Plated 

Service Valve with Tap 

Connector 

Brass Female 

Cylinder Adapter 


mm BSP 


mm BSP 

15APT 15 x 3/4" 


For maximum torque figures on plastic 

thread, please see Technicaal Checklist. 


mm BSP 

15PTSV 15 x 1/2" 

22PTSV 22 x 3/4" 

22CFA 22 x 1” 

Suitable for central heating systems. 

Brass Drain Cock 

Brass Rail Manifold 

Part No. 

Pipe OD (mm) 

JGRAIL4 4 ZONE 22 x 15 



Emergency Shut Off Tap 

Part No. 

Pipe OD (mm) 

15ESOT 15 


Part No. 

Pipe OD (mm) 

15BDC 15 

Speedfit Drain Cocks cannot be used where 

collet covers are fitted. They can be used 

with a standard fitting fitted with a collet clip. 

41

METRIC SIZES 

PIPE AND PIPE ACCESSORIES 

Speedfit ® Barrier Pipe 

Cross Link Polyethylene 

Coils 

Bundle of Ten 3-meter lenghts 

LLDPE Tube 

Pipe Insert 

To be used when connecting 

Speedfit Pipe to a compression 

fitting. 

Also for connecting LLDPE 

Tube to Speedfit Fittings 

Part No. Pipe OD Meter 

mm 

10BPEX-25C 10 x 25 

10BPEX-50C 10 x 50 

10BPEX-100C 10 x 100 

15BPEX-25C 15 x 25 

15BPEX-50C 15 x 50 

15BPEX-100C 15 x 100 

22BPEX-25C 22 x 25 

22BPEX-50C 22 x 50 

28BPEX-10x3L 28 x 3 

Part No. Pipe OD Meter 

mm 

PE-1007-100M-N 

PE-1007-100M-B 

PE-1007-100M-E 

PE-1007-100M-R 

10 x 100 Natural 

10 x 100 Blue 

10 x 100 Black 

10 x 100 Red 

PE-15115-0100M-B 15 x 100 Blue 

PE-15115-0100M-R 15 x 100 Red 

PE-15115-0100M-G 15 x 100 Green 

Part No. 

Pipe OD (mm) 

TSM10N 10 

TSM15N 15 

TSM22N 22 

TSM28N 28 


To be used with Speedfit Pipe 

and Speedfit fittings, to give 

enhanced sealing. 

Part No. 

Pipe OD (mm) 

STS10 10 

STS15 15 

STS22 22 

STS28 28 

Collet Cover 

Part No. 

Pipe OD (mm) 

AM1915W 15 

PM1915R 15 

PM1915B 15 

AM1922W 22 

PM1922R 22 

PM1922B 22 

Available in white, red or blue 

For use with standard 

Speedfit fittings only. 

Locking/Identification Clip 

Release Aid 

New 

Gray 

Locking Clip 

ID Clip 

Part No. 

Size (mm) 

CM1810S Gray 10 



To prevent accidental release of 

standard Speedfit fittings. 

Also available in red or blue to provide color 

coding of pipe. 

Red and blue collet clips should not 

be used to prevent accidental release 

CM1810R, CM1815R, CM1822R 

CM1810B, CM1815B, CM1822B 

Part No. 

Pipe OD (mm) 

10RA 10 

15RA 15 

22RA 22 

Allows a firmer grip on the 

collet when removing pipe. 

Conduit Pipe “Y” 

Part No. 

Size (mm) 

Black Conduit Pipe 

15BLK CON-25C 15mm x 25mm 




Cold Forming Bend 

10mm 

15mm and 22mm 

Part No. 

10CFB 10 

15CFB 15 

22CFB 22 

Pipe OD (mm) 

To help create a tighter bend than 

the minimum unsupported pipe. 

Pipe Clips and Spacers 

Nail Clip 

Pipe Cutter 

For up to 22mm size pipe 

Part No. 

Pipe OD (mm) 

PC15W 15 

PC22W 22 

PC28W 28 

PCSW 

Part No. 

Pipe OD (mm) 

NPC10 10 

NPC15 15 

NPC22 22 

NPC28 28 

Part No. 

JG-TS 

Heavy Duty Pipe Cutter 

For up to 28mm size pipe 

EPDM ‘O’ Ring 

Part No. 

JG HDC 

BLADE JGHDC 

Part No. 

Pipe OD (mm) 

10 EPR 10 

15 EPR 15 

22 EPR 22 

28 EPR 28 

42

Part Number 

Found On 

Page(s) 

1/4SCV 9 

10 EPR 42 

10BPEX-100C 42 

10BPEX-25C 42 

10BPEX-50C 42 

10CFB 42 

10HSV 41 

10MC(1/2) 41 

10RA 42 

15 EPR 42 

15APT 41 

15BDC 41 

15BLK CON-25C 42 


15BPEX-100C 42 

15BPEX-25C 42 

15BPEX-50C 42 

15BSC 41 

15CFB 42 

15DCV 41 

15ESOT 41 

15HSV 41 

15HSV-BRASS 41 

15ISV 41 

15MC(1/2) 41 

15PTSV 41 

15RA 42 

15STV 41 

22 EPR 42 



22BPEX-25C 42 

22BPEX-50C 42 

22CFA 41 

22CFB 42 

22CMA 41 

22HSV 41 

22MC(3/4) 41 

22PTSV 41 

22RA 42 

22STV 41 

28 EPR 42 

28BPEX-10X3L 42 

3/8SCV 9 

5/16SCV 9 

AM1915W 42 

AM1922W 42 

ASV3 14 

ASV4 14 

ASVPP1 13 

ASVPP2 13 

ASVPP5 13 

ASVPP6 13 

BLADE JGHDC 35, 42 

BLADES 23 

CI010821W 10 

CI010822W 10 

CI010823W 10 

CI011222W 10 

CI0208W 10 

CI0208WB 10 

CI0212W 10 

CI0308W 10 

CI0308WB 10 

CI0312W 10 

CI0312WB 10 

CI0312WR 10 

CI0408W 10 

CI0412W 10 

CI050821W 10 

CI050822W 10 

CI051222W 10 

CI051223W 10 

CI061208W 10 

CI1208W 10 

CI211206W 10 

CI220808W 10 

CI220808WB 10 

CI220808WR 10 

CI221208W 10 

CI221212W 10 

CI221212WB 10 

CI270808W 10 

CI2808W 16 

CI2812N 16 

Part Number 

Found On 

Page(s) 

CI2820N 16 

CI291208W 10 

CI320814S 9 

CI3208U7S 9 

CI3210U7S 9 

CI321214S 9 

CI3212U7S 9 

CI480821W 10 

CI480822W 10 

CI480823W 10 

CI481222W 10 

CM0715S 39 

CM0722S 39 

CM0728S 39 

CM1810S 42 

CM1815S 42 

CM1822S 42 

CM2808N 16 

CM2815N 16 

CM2822N 16 

CM-SC-15S 40 

FLX15 40 

FLX16 40 

FLX17 40 

FLX18 40 

FLX19 40 

FLX20 40 

FLX21 40 

FLX22 40 

FLX23 40 

FLX24 40 

FLX25 40 

FLX26 40 

FLX27 40 

FLX31 40 

FLX32 40 

ICLT/2 23 

JG HDC 35, 42 

JGMAN2-B 41 

JGMAN2-R 41 

JGMAN3-B 41 

JGMAN3-R 41 

JGMAN4-B 41 

JGMAN4-R 41 

JGRAIL12 41 

JGRAIL4 41 

JGRAIL6 41 

JG-TS 23, 35, 42 

MI2806N 16 

MI2806ST 16 

MI2808N 16 

MI2808ST 16 

MI2812N 16 

MI2812ST 16 

MI2816N 16 

MI4508F4S 12 

MI4512F4S 12 

MI4512F6S 12 

MM052226N 41 

MM052228N 41 

MM052828N 41 

MM2804N 16 

MM2805N 16 

MM2806N 16 

MM2808N 16 

MM2808ST 16 

MM2810N 16 

MM2812N 16 

MW011504N 41 

MW012206N 41 

MW012808N 41 

MW012818N 41 

MW051504N 41 

MW052206N 41 

MW052818N 41 

MW501514N 41 

MW502216N 41 

MWI012024 33 

MWI012826 33 

MWI052024 33 

MWI052826 33 

MWI2820 15 

MWI2828 15 

MWI502034 33 

NC2098 12 

Found On 

Part Number Page(s) 

NC2145 12 

NC2164 12 

NC2173 12 

NC2249 12 

NC2258 12 

NC2384 35 

NC2390 35 

NC2391-LH 35 

NC2391-RH 35 

NC2394 35 

NC2420 35 

NC2421 35 

NC2422 35 

NC356-02 9 

NC392-02 8 

NC448 12, 40 

NC448-3/8 40 

NC462 12, 40 

NC471 40 

NC473 40 

NC478 12 

NC641 9 

NC657 22 

NC730-02 9 

NC737 40 

NC869 12 

NC908 12 

NC932 12 

NCPI011211S 6 

NCPI011212S 6 

NPC10 42 

NPC15 42 

NPC22 42 

NPC28 42 

NPCI20 35 

NPCI28 35 

PC15W 42 

PC22W 42 

PC28W 42 

PCI2808S 16 

PCI2812S 16 

PCI2816S 16 

PCI2820 15 

PCI2828 15 

PCM2808S 16 

PCSW 42 

PE-04025-0100M-B 18 

PE-04025-0100M-E 18 

PE-04025-0100M-N 18 

PE-04025-0100M-R 18 

PE-0604-0100M-B 18 

PE-0604-0100M-E 18 

PE-0604-0100M-N 18 

PE-0604-0100M-R 18 

PE-0806-100M-B 18 

PE-0806-100M-E 18 

PE-0806-100M-N 18 

PE-0806-100M-R 18 

PE-0806-100M-W 18 

PE-08-BI-0500F-B 18 

PE-08-BI-0500F-E 18 

PE-08-BI-0500F-G 18 

PE-08-BI-0500F-N 18 

PE-08-BI-0500F-O 18 

PE-08-BI-0500F-R 18 

PE-08-BI-0500F-W 18 

PE-08-BI-0500F-Y 18 

PE-08-BI-1000F-B 18 

PE-08-BI-1000F-E 18 

PE-08-BI-1000F-G 18 

PE-08-BI-1000F-N 18 

PE-08-BI-1000F-O 18 

PE-08-BI-1000F-R 18 

PE-08-BI-1000F-W 18 

PE-08-BI-1000F-Y 18 

PE-1007-100M-B 18, 42 

PE-1007-100M-E 18, 42 

PE-1007-100M-N 18, 42 

PE-1007-100M-R 18, 42 

PE-10-CI-0500F-B 18 

PE-10-CI-0500F-E 18 

PE-10-CI-0500F-N 18 

PE-10-CI-0500F-R 18 

PE-1209-100M-B 18 

PE-1209-100M-E 18 

Part Number 

Found On 

Page(s) 

PE-1209-100M-N 18 

PE-1209-100M-R 18 

PE-12-EI-0500F-B 18 

PE-12-EI-0500F-E 18 

PE-12-EI-0500F-G 18 

PE-12-EI-0500F-N 18 

PE-12-EI-0500F-O 18 

PE-12-EI-0500F-R 18 

PE-12-EI-0500F-V 18 

PE-12-EI-0500F-W 18 

PE-12-EI-0500F-Y 18 

PE-15115-0100M-B 18, 42 

PE-15115-0100M-G 18, 42 

PE-15115-0100M-R 18, 42 

PE-16-GI-0250F-B 18 

PE-16-GI-0250F-E 18 

PE-16-GI-0250F-N 18 

PE-16-GI-0250F-R 18 

PE-16-GI-0250F-W 18 

PEI0220 32 

PEI0228 32 

PEI0236 32 

PEI0320 32 

PEI0328 32 

PEI0336 32 

PEI0420 32 

PEI0428 32 

PEI0436 32 

PEI062820 32 

PEI063628 32 

PEI222020 32 

PEI222828 32 

PEI3028A 32 

PEI3028B 32 

PEI3028C 32 

PEI3028D 32 

PEI4620 32 

PEI4628 32 

PEI4636 32 

PEI532020 33 

PEI532820 33 

PEI532828 33 

PEIBTC2034 33 

PEIBTC20C75 33 

PEISTC2034 33 

PEISTC20C75 33 

PEM0210W 39 

PEM0215W 39 

PEM0222W 39 

PEM0228W 39 

PEM0310W 39 

PEM0315W 39 

PEM0322W 39 

PEM0328W 39 

PEM0410W 39 

PEM0415W 39 

PEM0422W 39 

PEM0428W 39 

PEM061510W 39 

PEM062215W 39 

PEM062815W 39 

PEM062822W 39 

PEM201510W 39 

PEM202215W 39 

PEM221010W 39 

PEM221515W 39 

PEM222222W 39 

PEM3015AW 39 

PEM3015BW 39 

PEM302210AW 39 

PEM3022AW 39 

PEM3022BW 39 

PEM3022CW 39 

PEM3022DW 39 

PEM3028AW 39 

PEM3028BW 39 

PEM3028DW 39 

PEMBTC1514 40 

PEMSTC1514 40 

PEMSTC1516 40 

PEMSTC2216 40 

PI010601S 6 

PI010602S 6 

PI010621S 6 

PI010801S 6 

Part Number 

Found On 

Page(s) 

PI010802S 6 

PI010812S 6 

PI010821S 6 

PI010822S 6 

PI010823S 6 

PI0108F4S 6 

PI011202S 6 

PI011203S 6 

PI011212S 6 

PI011221S 6 

PI011222S 6 

PI011223S 6 

PI011224S 6 

PI0112C5S 6 

PI0112F4S 6 

PI0112F5S 6 

PI0112F6S 6 

PI0112F8S 6 

PI011603S 6 

PI011604S 6 

PI011623S 6 

PI011624S 6 

PI0116F8S 6 

PI012026S 6 

PI0206S 6 

PI0208S 6 

PI0212S 6 

PI0216S 6 

PI0306S 6 

PI0308S 6 

PI0312S 6 

PI0316S 6 

PI0406S 6 

PI0408S 6 

PI0412S 6 

PI0416S 6 

PI050601S 7 

PI050621S 6 

PI050801S 7 

PI050802S 7 

PI050821S 6 

PI050822S 6 

PI050823S 6 

PI051202S 7 

PI051203S 7 

PI051212S 7 

PI051213S 7 

PI051222S 6 

PI051223S 6 

PI051603S 7 

PI051604S 7 

PI051623S 6 

PI051624S 6 

PI060605S 7 

PI061006S 7 

PI061008S 7 

PI061206S 7 

PI061208S 7 

PI061210S 7 

PI061610S 7 

PI061612S 7 

PI0806S 7 

PI0808S 7 

PI0812S 7 

PI0816S 7 

PI090601S 7 

PI090621S 7 

PI090801S 7 

PI090802S 7 

PI090821S 7 

PI090822S 7 

PI091202S 7 

PI091203S 7 

PI091221S 7 

PI091222S 7 

PI091223S 7 

PI091603S 7 

PI091604S 7 

PI091622S 7 

PI091623S 7 

PI091624S 7 

PI100601S 7 

PI100621S 7 

PI100801S 7 

PI100802S 7 

Part Number 

Found On 

Page(s) 

PI100821S 7 

PI100822S 7 

PI101202S 7 

PI101203S 7 

PI101222S 7 

PI101223S 7 

PI101603S 7 

PI101604S 7 

PI101623S 7 

PI101624S 7 

PI110601S 7 

PI110621S 7 

PI110801S 7 

PI110802S 7 

PI110821S 7 

PI110822S 7 

PI111202S 7 

PI111203S 7 

PI111222S 7 

PI111223S 7 

PI111603S 7 

PI111604S 7 

PI111623S 7 

PI111624S 7 

PI1206S 8 

PI1208S 8 

PI121208S 8 

PI1212S 8 

PI1216S 8 

PI131012S 8 

PI131216S 8 

PI1906S 23 

PI1908S 23 

PI1912S 23 

PI1916S 23 

PI200806S 8 

PI201006S 8 

PI201008S 8 

PI201206S 8 

PI201208S 8 

PI201210S 8 

PI201610S 8 

PI201612S 8 

PI211006S 8 

PI211008S 8 

PI211206S 8 

PI211208S 8 

PI211210S 8 

PI211610S 8 

PI211612S 8 

PI220606S 8 

PI220808S 8 

PI221206S 8 

PI221208S 8 

PI221210S 8 

PI221212S 8 

PI221616S 8 

PI2308S 8 

PI2312S 8 

PI2316S 8 

PI241210S 8 

PI250806S 8 

PI250808S 8 

PI250810S 8 

PI251006S 8 

PI251008S 8 

PI251012S 8 

PI251012SL 8 

PI251208S 8 

PI251210S 8 

PI251212S 8 

PI251212SL 8 

PI251216S 8 

PI251612S 8 

PI251616S 8 

PI2808S 16 

PI2808W 16 

PI2812S 16 

PI2812W 16 

PI2816S 16 

PI290808S 8 

PI290810S 8 

PI291008S 8 

PI291208S 8 

PI291210S 8 

43

44 

Part Number 

Found On 

Page(s) 

PI301208S 8 

PI301612S 8 

PI450822S 9 

PI451014CS 9 

PI451014FS 9 

PI451015CS 9 

PI451015FS 9 

PI451213S 9 

PI451214CS 9 

PI451214FS 9 

PI451215CS 9 

PI451215FS 9 

PI451222S 9 

PI4512C5S 9 

PI4512F4S 9 

PI4512F6S 9 

PI451613S 9 

PI451614CS 9 

PI451615CS 9 

PI451615FS 9 

PI4516C5S 9 

PI4608S 9 

PI4612S 9 

PI4712S 9 

PI480821S 9 

PI480822S 9 

PI480823S 9 

PI481222S 9 

PI481223S 9 

PI482024S 9 

PI491612S 9 

PIC1808R 23 

PIC1812R 23 

PIC1816R 23 

PISV0412CS 14 

PISV0412S 14 

PISV0416S 14 

PIUB12S 9 

PIUB16S 9 

PL10 40 

PL15 40 

PL22 40 

PL28 40 

PM010401E 20 

PM010401S 6 

PM010402E 20 

PM010402S 6 

PM010411E 20 

PM010412E 20 

PM010421S 6 

PM010422S 6 

PM010501E 20 

PM010502E 20 

PM010511E 20 

PM010512E 20 

PM010601E 20 

PM010602E 20 

PM010611E 20 

PM010612E 20 

PM010622E 20 

PM010801E 20 

PM010801S 6 

PM010802E 20 

PM010802S 6 

PM010803E 20 

PM010803S 6 

PM010811E 20 

PM010812E 20 

PM010813E 20 

PM010821S 6 

PM010822S 6 

PM010823S 6 

PM0108C5S 6 

PM0108F5S 6 

PM011002E 20 

PM011003E 20 

PM011004E 20 

PM011012E 20 

PM011013E 20 

PM011014E 20 

PM011203E 20 

PM011204E 20 

PM011213E 20 

PM011214E 20 

PM0204E 20 

PM0204S 6 

Part Number 

Found On 

Page(s) 

PM0205E 20 

PM0206E 20 

PM0208E 20 

PM0208S 6 

PM0210E 20 

PM0212E 20 

PM0304E 20 

PM0304S 6 

PM0305E 20 

PM0306E 20 

PM0308E 20 

PM0308S 6 

PM0310E 20 

PM0312E 20 

PM0404E 20 

PM0404S 6 

PM0405E 20 

PM0406E 20 

PM0408E 20 

PM0408S 6 

PM0410E 20 

PM0412E 20 

PM050401E 20 

PM050401S 7 

PM050402E 20 

PM050402S 7 

PM050411E 20 

PM050412E 20 

PM050421S 6 

PM050422S 6 

PM050501E 20 

PM050502E 20 

PM050511E 20 

PM050512E 20 

PM050601E 20 

PM050602E 20 

PM050611E 20 

PM050612E 20 

PM050801E 20 

PM050801S 7 

PM050802E 20 

PM050802S 7 

PM050803E 20 

PM050803S 7 

PM050811E 20 

PM050812E 20 

PM050812S 7 

PM050813E 20 

PM050821S 6 

PM050822S 6 

PM050823S 6 

PM051002E 20 

PM051003E 20 

PM051004E 20 

PM051012E 20 

PM051013E 20 

PM051014E 20 

PM051203E 20 

PM051204E 20 

PM051213E 20 

PM051214E 20 

PM060504E 21 

PM060604E 21 

PM060605E 21 

PM060804E 21 

PM060805E 21 

PM060806E 21 

PM061006E 21 

PM061008E 21 

PM061208E 21 

PM061210E 21 

PM061510E 21 

PM0804R 21 

PM0804S 7 

PM0805R 21 

PM0806R 21 

PM0808R 21 

PM0808S 7 

PM0810R 21 

PM0812R 21 

PM090401E 21 

PM090402E 21 

PM090411E 21 

PM090412E 21 

PM090421S 7 

PM090422S 7 

Part Number 

Found On 

Page(s) 

PM090501E 21 

PM090502E 21 

PM090511E 21 

PM090512E 21 

PM090601E 21 

PM090602E 21 

PM090611E 21 

PM090612E 21 

PM090801E 21 

PM090801S 7 

PM090802E 21 

PM090802S 7 

PM090803E 21 

PM090803S 7 

PM090811E 21 

PM090812E 21 

PM090813E 21 

PM090821S 7 

PM090822S 7 

PM090823S 7 

PM091002E 21 

PM091003E 21 

PM091004E 21 

PM091012E 21 

PM091013E 21 

PM091014E 21 

PM091203E 21 

PM091204E 21 

PM091213E 21 

PM091214E 21 

PM100401E 21 

PM100402E 21 

PM100411E 21 

PM100412E 21 

PM100421S 7 

PM100422S 7 

PM100501E 21 

PM100502E 21 

PM100511E 21 

PM100512E 21 

PM100601E 21 

PM100602E 21 

PM100611E 21 

PM100612E 21 

PM100801E 21 

PM100801S 7 

PM100802E 21 

PM100802S 7 

PM100803E 21 

PM100803S 7 

PM100811E 21 

PM100812E 21 

PM100813E 21 

PM100821S 7 

PM100822S 7 

PM100823S 7 

PM101002E 21 

PM101003E 21 

PM101004E 21 

PM101012E 21 

PM101013E 21 

PM101014E 21 

PM101203E 21 

PM101204E 21 

PM101213E 21 

PM101214E 21 

PM110401E 21 

PM110402E 21 

PM110411E 21 

PM110412E 21 

PM110421S 7 

PM110422S 7 

PM110501E 21 

PM110502E 21 

PM110511E 21 

PM110512E 21 

PM110601E 21 

PM110602E 21 

PM110611E 21 

PM110612E 21 

PM110801E 21 

PM110801S 7 

PM110802E 21 

PM110802S 7 

PM110803E 21 

PM110803S 7 

Part Number 

Found On 

Page(s) 

PM110811E 21 

PM110812E 21 

PM110813E 21 

PM110821S 7 

PM110822S 7 

PM110823S 7 

PM111002E 21 

PM111003E 21 

PM111004E 21 

PM111012E 21 

PM111013E 21 

PM111014E 21 

PM111203E 21 

PM111204E 21 

PM111213E 21 

PM111214E 21 

PM1204E 22 

PM1204S 8 

PM1205E 22 

PM1206E 22 

PM1208E 22 

PM1208S 8 

PM1210E 22 

PM1212E 22 

PM130405E 22 

PM1904E 23 

PM1904S 23 

PM1905E 23 

PM1906E 23 

PM1908E 23 

PM1908S 23 

PM1910E 23 

PM1912E 23 

PM1915B 42 

PM1915E 23 

PM1915R 42 

PM1918E 23 

PM1922B 42 

PM1922E 23 

PM1922R 42 

PM200604E 22 

PM200804E 22 

PM200804S 8 

PM200806E 22 

PM201004E 22 

PM201006E 22 

PM201008E 22 

PM201208E 22 

PM201210E 22 

PM210604E 22 

PM210804E 22 

PM210804S 8 

PM210806E 22 

PM211004E 22 

PM211006E 22 

PM211008E 22 

PM211208E 22 

PM211210E 22 

PM220404E 22 

PM220404S 8 

PM220505E 22 

PM220606E 22 

PM220808E 22 

PM220808S 8 

PM221010E 22 

PM221212E 22 

PM2304E 22 

PM2308E 22 

PM2308S 8 

PM250604E 22 

PM250806E 22 

PM250808S 8 

PM251008E 22 

PM2608S 23 

PM2610S 23 

PM2804S 16 

PM2806E 16 

PM2808E 16 

PM2808S 16 

PM2808W 16 

PM2810E 16 

PM290808S 8 

PM3022AE 22 

PM450411E 22 

PM450612E 22 

PM450812E 22 

Part Number 

Found On 

Page(s) 

PM4508C5S 9, 22 

PM4508F4S 9, 22 

PM4612E 22 

PM480621E 22 

PM480622E 22 

PM480623E 22 

PMC1808R 23 

PMC1815R 23 

PMUB15E 22 

PP010821W 4 

PP010822W 4 

PP010823W 4 

PP011222W 4 

PP011223W 4 

PP011224W 4 

PP011623W 4 

PP011624W 4 

PP0208W 4 

PP0212W 4 

PP0216W 4 

PP0308W 4 

PP0312W 4 

PP0316W 4 

PP0408W 4 

PP0412W 4 

PP0416W 4 

PP050821W 4 

PP050822W 4 

PP051222W 4 

PP051223W 4 

PP051623W 4 

PP051624W 4 

PP061208W 4 

PP061612W 4 

PP062008W 4, 35 

PP062012W 4, 35 

PP062016W 4, 35 

PP0808W 4 

PP0812W 4 

PP0816W 4 

PP090821W 4 

PP090822W 4 

PP091222W 4 

PP091223W 4 

PP100821W 4 

PP100822W 4 

PP101222W 4 

PP101223W 4 

PP110821W 5 

PP110822W 5 

PP111222W 5 

PP111223W 5 

PP1208W 5 

PP121208W 5 

PP1212W 5 

PP1216W 5 

PP201208W 5 

PP201612W 5 

PP211008W 5 

PP211208W 5 

PP211612W 5 

PP220808W 5 

PP221208W 5 

PP221212W 5 

PP221616W 5 

PP2312W 5 

PP251212W 5 

PP251216W 5 

PP251612W 5 

PP251616W 5 

PP2808W 16 

PP2812W 16 

PP30120812W 5 

PP30121208W 5 

PP301612W 5 

PP3208U7W 5 

PP3212U7W 5 

PP450821W 5 

PP450822W 5 

PP451222W 5 

PP451223W 5 

PP480821W 5 

PP480822W 5 

PP480823W 5 

PP481222W 5 

PP481223W 5 

Part Number 

Found On 

Page(s) 

PPM0208W 4, 19 

PPM0212W 19 

PPM0308W 4, 19 

PPM0312W 19 

PPM0408W 4, 19 

PPM0412W 19 

PPM061512W 19 

PPM0808W 4, 19 

PPM201512W 19 

PPM220808W 5, 19 

PPM221212W 19 

PPM2312W 19 

PPSV010822W 14 

PPSV011223W 14 

PPSV040808W 14 

PPSV041212W 14 

PPSV500822W 14 

PPSV501222W 14 

PSE4610W 39 

PSE4615W 39 

PSE4622W 39 

SFM512210S 40 

SFM522210S 40 

SFM522215S 40 

SI030812S 11 

SI031012S 11 

SI031210S 11 

SI031212S 11 

SI041012S 11 

SI041210S 11 

SI041212S 11 

SI270808S 11 

SI271008S 11 

SI271208S 11 

SI401210S 11 

SI401212S 11 

SI421012S 11 

SI421210S 11 

SI421212S 11 

SM010802S 11 

SM010812S 11 

SM0108F4S 11 

SM0108F6S 11 

SM030808S 11 

SM040808S 11 

SM400808S 11 

SM410808E 11 

SM420808S 11 

SPAN1 11 

STS10 42 

STS15 42 

STS22 42 

STS28 42 

STSI20 34 

STSI28 34 

SVMC-10 14 

TSI20 34 

TSI250S 23 

TSI28 34 

TSI312S 23 

TSI36 34 

TSI375S 23 

TSM10N 23, 42 

TSM15N 23, 42 

TSM22N 23, 42 

TSM28N 42 

TSNIP 23 

TSPITOOL 23 

US1/2PEX-100F-B 34 

US1/2PEX-100F-R 34 

US1/2PEX-100F-W 34 

US1/2PEX-10X10-B 34 

US1/2PEX-10X10-R 34 

US1/2PEX-10X10-W 34 

US1PEX-10X10-B 34 

US1PEX-10X10-R 34 

US1PEX-10X10-W 34 

US3/4PEX-100F-B 34 

US3/4PEX-100F-R 34 

US3/4PEX-100F-W 34 

US3/4PEX-10X10-B 34 

US3/4PEX-10X10-R 34 

US3/4PEX-10X10-W 34 

USCLIP20 35 

USCLIP28 35 

WBI2024 33

John Guest USA, Inc. Terms & Conditions of Sale Rev. 4/06 

Terms and Conditions 

The products described in this document are hereby offered for sale to be established by John Guest (USA) Inc., 

its subsidiaries and its authorized distributors. This offer and its acceptance by any customer (the “Buyer”) shall be 

governed by all of the following Terms and Conditions. Buyer’s order for any item described in this document, when 

communicated to John Guest (USA) Inc., its subsidiaries or an authorized distributor (the “Seller”) verbally or in 

writing, shall constitute acceptance of this offer. 

1. Terms and Conditions of Sale. All descriptions, quotations, proposals, offers, acknowledgments, acceptances 

and sales of the Seller’s products are subject to and shall be governed exclusively by the terms and conditions stated 

herein (the “Agreement”). The Buyer’s acceptance of any offer to sell is limited to the terms and conditions in the 

Agreement. Any terms or conditions in addition to, or inconsistent with those stated in the Agreement, proposed by 

the Buyer in any acceptance of an offer by the Seller, are hereby objected to. No such additional, different or inconsistent 

terms and conditions shall become part of the agreement between the Buyer and the Seller unless expressly accepted 

in writing by the Seller. The Seller’s acceptance of any offer to purchase by the Buyer is expressly conditioned upon 

the Buyer’s assent to all the terms and conditions in this Agreement, irrespective of any terms in addition to, or 

inconsistent with those contained in the Buyer’s offer. Acceptance of the Seller’s products shall in all events constitute 

such assent. 

2. Documents. Unless provided otherwise in the Agreement, all catalog descriptions, illustrations, drawings and 

literature or independently submitted estimates of performance, weights and measurements or other specifications 

provided by the Seller are mere approximations and the Seller reserves the right to alter or amend the same at any 

time. The Seller reserves the right to correct clerical or technical errors in the contract documents. The Buyer shall 

furnish with his order all necessary specifications and information. The Seller takes no responsibility for goods 

manufactured, priced or delivered not in accordance with the order or the specifications unless the Buyer’s order and 

specifications are clear and correct. 

3. Prices. Unless otherwise provided, all prices contained in our quotations and written acceptances are ex works 

and do not include the cost of packing. All orders are accepted on the condition that all such prices are subject to 

revision by the Seller at any time before the goods are dispatched to take account of any price change. In the event 

that the Buyer does not place the entire order quoted by the Seller for the Buyer, the Seller reserves the right to revise 

its prices. The Seller also reserves the right to revise its prices if the Buyer modifies the specification or quantity of the 

goods, or the delivery requirements after the order has been accepted by the Seller. 

4. Advice. All advice given in connection with the Seller’s goods is provided without charge to the Buyer. Any advice 

and assistance given by the Seller to the Buyer is given at the Buyer’s risk and the Seller shall not be liable for any 

loss, damage or claim arising therefrom. 

5. Payment. (a) Unless otherwise provided in the Agreement, or explicitly agreed upon in writing by the Seller, payment 

is due in full 30 days from date of shipment of the items purchased herein under. (b) In the case of an installment 

contract, deliveries or parts, payment for each installment delivery or part shall be made under subclause (a) as if the 

same constituted a separate agreement. (c) Amounts not timely paid shall bear interest at the rate of 2-1/2% above 

the Seller’s bank’s prime rate from time to time in force. (d) In the event that the Buyer fails within one calendar month 

of the date for payment to effect any payment which may be due under the Agreement or any agreement with the 

Seller, or if the Buyer commits any breach of the Agreement, or if the Buyer becomes insolvent or commits any act of 

bankruptcy or contemplation of liquidation, the Seller will be entitled, without prejudice to the Seller’s other rights, to 

terminate the Agreement or any unfulfilled part thereof, or at the Seller’s option to make partial deliveries. 

6. Modifications and Cancellations. This Agreement is not subject to oral modification or cancellation. A Buyer’s 

request for modification or cancellation will not be incorporated into the Agreement unless the request is accepted by 

the Seller in a writing that amends the Agreement. Acceptance of any such requested modification or cancellation shall 

be at the Seller’s discretion and shall be upon such terms and conditions as the Seller may require. 

7. Handling Charge. Goods supplied in accordance with the Buyer’s order may later be returned to the Seller at the 

Seller’s discretion provided the return is pre-authorized, in writing and the merchandise is unused, in original packages, 

unaltered, clean and no older than 60 days from the date of shipment by the Seller. The Buyer will be required to pay 

to the Seller a handling charge of 15% of the purchase price of the returned goods. A copy of the original invoice for 

the merchandise must accompany all returns. 

8. Delivery. (a) Any delivery dates quoted are approximate only and the Seller shall have no liability for any delays in 

delivery. (b) Unless provided otherwise, delivery of the goods shall be made when the Seller has notified the Buyer 

that the goods are ready for dispatch. Regardless of the method of delivery, delivery shall be made F.O.B. Seller’s 

plant, where the risk of loss shall thereupon pass to the Buyer upon the Seller’s delivery to a carrier. Notwithstanding 

that the Seller’s prices are ex-works, the Seller is prepared by special contract to procure carriage or freight and 

insurance on behalf of the Buyer and at Buyer’s cost in which event the Seller shall be under no liability for damage 

in transit or loss or damage to the goods beyond the point at which the Seller contracts to deliver the same. (c) Seller 

will not make drop shipments. 

9. Inspection and Rejection. (a) The following provisions shall apply in relation to all deliveries of goods: the 

Seller shall not be held liable for any claims of damage in transit, shortage of delivery or loss of goods, unless 

in the case of shortage of delivery, a separate notice in writing is given to the carrier concerned and to the 

Seller within three (3) days of the receipt of the goods, followed by a complete claim in writing within five (5) 

days of receipt of the goods and in the case of loss of goods, a separate notice in writing is given to the carrier 

concerned and to the Seller and a complete claim in writing made within thirty (30) days of the date of 

consignment. The Buyer must inspect the goods on arrival from the carrier, however, where goods are accepted 

from the carrier concerned without being inspected, the delivery book of the carrier concerned must be signed “not 

examined”. The Seller shall have the right to inspect the goods at the Buyer’s premises in respect to any such claims 

made by the Buyer and the Buyer shall retain such goods until the Seller has inspected such goods or until the Seller 

has notified the Buyer that the Seller does not wish to inspect such goods. Any breach of these conditions in this 

provision shall serve as a waiver to any claim brought by the buyer. (b) Without prejudice to the Seller’s other rights, 

should the Buyer fail for any reason to send the Seller forwarding instructions within ninety (90) days after the date of 

the Seller’s notification that the goods are ready for dispatch or to accept delivery of the goods, the Seller shall be 

entitled at the Buyer’s risk and expense to store the goods and/or to procure or effect storage of the goods elsewhere. 

Goods so stored shall be paid for as if they had been dispatched and/or accepted. 

10. Special Tooling. Where it is necessary for the Seller to manufacture or to purchase special tooling, including 

without limitation tools, dies, jigs, mandrills, fixtures, molds, and patterns in order to execute a contract, the Buyer will 

be charged with a proportion of the cost of such special tools. Such special tooling shall be and remain the Seller’s 

property notwithstanding payment of any charges made by the Buyer. In no event will the Buyer acquire any interest 

in apparatus belonging to the Seller which is utilized in the manufacture of the items sold hereunder, even if such 

apparatus has been specially converted or adopted for such manufacture and notwithstanding any charges paid by 

the Buyer therefor. Unless otherwise agreed, the Seller shall have the right to alter, discard or otherwise dispose of 

any special tooling or other property in its sole discretion at any time. 

11. Test and Performance. (a) The Seller’s goods are, where practicable, submitted to the Seller’s standard test before 

delivery. If special tests are required, these shall be made at the Seller’s premises unless otherwise agreed, and will be 

subject to an extra charge. (b) The Seller accepts no liability for failure to attain any performance figures quoted by the 

Seller unless the Seller specifically has guaranteed them with an agreed sum as liquidation damages and the Buyer 

has suffered actual loss by reason of the failure to attain the figures quoted. (c) Any particulars of weights and 

measurements, power and consumption, power output or performance relating to the goods and like matters furnished 

by the Seller to the Buyer in the Seller’s catalogs, literature or otherwise, are approximate and are intended only to 

present a general idea of the goods to be supplied and unless previously agreed specifically in writing shall not form 

part of the Agreement. 

12. Buyer’s Property. Any designs, tools, patterns, materials, drawings, confidential information or equipment 

furnished to the Seller by the Buyer, or any other items which become the Buyer’s property, may be considered 

obsolete and may be destroyed by the Seller after two (2) consecutive years have elapsed without the Buyer placing 

an order for the items which are manufactured using such property. The Seller shall not be responsible for any loss or 

damage to such property while it is in the Seller’s possession or control. 

13. Taxes. Unless otherwise indicated, all prices and charges are exclusive of excise, sales, use, property, occupational 

or like taxes which may be imposed by any taxing authority upon the manufacture, sale or delivery of the items sold 

hereunder. If any such taxes must be paid by the Seller, or if the Seller is liable for the collection of such tax, the amount 

thereof shall be in addition to the amounts for the item sold. The Buyer agrees to pay all such taxes or to reimburse the 

Seller therefor upon receipt of its invoice. If the Buyer claims exemption from any sales, use or other tax imposed by 

any taxing authority, the Buyer shall promptly indemnify and hold the Seller harmless from and against any such tax, 

as well as any interest or penalties thereon which may be assessed if the items are held to be taxable. 

14. Warranty. (a) The Seller warrants that the items sold hereunder shall be free from defects in material or workmanship 

at the time of shipment by the Seller. The Seller warrants that if within 12 months of delivery of the goods to the Buyer 

the Buyer returns immediately to the Seller’s premises any of the said goods which the Buyer believes to be defective, 

carrier paid, properly packed and clearly marked with the Buyer’s full name and address and any other information 

such as serial numbers which may be necessary to enable the goods to be identified, together with a complete 

description of the respects in which it is alleged that the goods are defective, they will be repaired or new goods will 

be supplied in exchange and the goods so repaired or such new goods will be delivered to the Buyer free of charge 

at the Seller’s premises provided that the foregoing warranty shall only be applicable if upon demand by the Seller, 

the Buyer proves to the Seller’s satisfaction: (i) that the defect was due solely to defective workmanship; (ii) that no 

alterations or repairs have been made to the goods except with the Seller’s written consent; (iii) that the defect was 

not caused by any act of the Buyer or its agents; and (iv) that the defect was not caused by any matter beyond the 

reasonable control of the Seller, including, without limitation, accident or normal wear and tear. (b) For John Guest PEI 

and MWI Series Plumbing products only, the warranty periodcontained in sub-paragraph (a) may be extended to 120 

months from date of delivery of the goods to the Buyer provided that, in addition to all other requirements, Seller’s 

products are: (i) used in domestic plumbing applications or potable water related OEM/equipment installations; (ii) a) 

Installed by a Licensed Contractor, Plumber or qualified equipment installation professional; or b) OEM factory installed 

by a trained professional; c) Installed and operated in accordance with published John Guest technical specifications. 

(c) All costs and expenses, including freight charges, customs duties, and insurance incurred in returning the goods to 

the Seller’s premises in accordance with this provision shall be paid by the Buyer. The benefit of this warranty shall not 

be assignable by the Buyer. (d) The warranty contained in sub-paragraph (a) above does not extend to any goods not 

manufactured by the Seller even though supplied by the Seller nor does it extend to any second-hand or reconditioned 

goods nor does it extend to components manufactured by the Seller but installed, attached or welded by the Buyer 

or his customer on equipment not manufactured by the Seller. Goods not manufactured by the Seller carry only the 

warranty (if any) of their makers and the Buyer is entitled to the benefit thereof only so far as the Seller has 

the power to transfer it. (e) This warranty comprises the sole and entire warranty pertaining to items provided 

hereunder, the Seller makes no other warranty, guarantee, or representation of any kind whatsoever. All other 

warranties, including but not limited to, merchantability and fitness for purpose, whether expressed or implied, or 

arising by operation of law, trade usage, or course of dealing are hereby disclaimed. (f) Notwithstanding the foregoing, 

there are no warranties whatsoever on items built or acquired wholly or partially to the Buyer’s designs or specifications. 

15. Limited Remedy. The Seller’s liability arising from or in any way connected with the items sold or this Agreement 

shall be limited exclusively to repair or replacement of the items sold. In no event shall the Seller be liable to the Buyer 

or any 3rd party for any incidental, consequential or special damages of any kind or nature whatsoever, including but 

not limited to lost profits arising from or in any way connected with this agreement or items sold hereunder, whether 

alleged to arise from breach of contract, express or implied warranty, or in tort, including without limitation, negligence, 

failure to warn or strict liability. 

16. Indemnity for Infringement of Intellectual Property Rights. (a) The Buyer shall defend and indemnify the 

Seller against all actions, claims, demands, penalties and costs by 3rd parties in tort, or for infringement, or alleged 

infringement, of patents, trademarks, copyrights, trade dress, trade secret or other rights of any 3rd party resulting 

from the goods manufactured in accordance with the Buyer’s specifications or based on any information provided by 

the Buyer. The Buyer will defend any action against the Seller for title, patent, trademark, copyright infringement, or 

other claimed by a 3rd party at the Buyer’s sole cost and expense. (b) The Seller shall have no liability for infringement 

of any patents, trademarks, copyrights, trade dress, trade secrets or similar rights except as provided in this provision. 

The Seller will defend and indemnify the Buyer against allegations of infringement of US patents, US trademarks, 

copyrights, trade dress and trade secrets (“Intellectual Property Rights”). The Seller will defend at its expense and will 

pay the cost of any settlement or damages awarded in an action brought against the Buyer based on an allegation that 

an item sold pursuant to this contract infringes the Intellectual Property Rights of a 3rd party. The Seller’s obligation 

to defend and indemnify the Buyer is contingent on the Buyer notifying the Seller within 10 days after sole control 

over the defense of any allegations or actions, including all negotiations for settlement or compromise. If an item sold 

hereunder is subject to a claim that it infringes the Intellectual Property Rights of a 3rd party, the Seller may, at its sole 

expense and option, procure for the Buyer the right to continue using said item, replace or modify said item so as to 

make it noninfringing, or offer to accept return of said item and return the purchase price less a reasonable allowance 

for depreciation. Notwithstanding the foregoing, the Seller shall have no liability for claims of infringement based 

on information provided by Buyer, or directed to items delivered hereunder for which the designs are specified in 

combination or use in a system of any item sold hereunder. The foregoing in this provision shall constitute the Seller’s 

sole and exclusive liability and the Buyer’s sole and exclusive remedy for infringement of Intellectual Property Rights. 

17. Lien. In addition to any right of lien to which the Seller may by law be entitled, the Seller shall have a general 

lien on all goods of the Buyer in the Seller’s possession (although such goods or some of them may have been 

paid for) for the unpaid price of any other goods sold and delivered to the Buyer by the Seller under the same or 

other contracts. 

18. Waiver. The Seller’s rights shall not be affected or restricted by any indulgence or forbearance granted to the 

Buyer. No waiver by the Seller of any breach shall operate as a waiver of any later breach. 

19. Force Majeure. The Seller shall be excused from performing any of its obligations under this Agreement which 

are prevented or delayed by any occurrence not within the reasonable control of the Seller, including but not limited 

to, accidents, acts of God, destruction or damage to the goods or the Seller’s manufacturing plant, delays or failures 

in delivery of carriers or suppliers, shortages of materials, strikes or other labor matters, floods, earthquakes, fire, 

riots, explosions, or any regulations, rules, ordinances or orders of any governmental authority, federal, state or local, 

whether such cause exists at the date of the order or not. 

20. Buyer’s Representation of Solvency. The Buyer hereby represents that as of the signing of this Agreement it was 

not insolvent within the meaning of the Uniform Commercial Code or the Bankruptcy Laws of the United States. 

21. Assignment and Delegation. The rights and obligations of the parties under this Agreement may not be assigned 

or delegated, except on the express written consent of the other party to the assignment or delegation. 

22. Integration. The rights and obligations of the parties and the terms and conditions set forth herein, together with 

any amendments, modifications and any different terms and conditions expressly accepted by the Seller in writing, 

shall constitute a complete and exclusive statement of the terms of this Agreement. This Agreement supersedes not 

only all prior agreements, but also oral agreements made contemporaneously with the execution of this Agreement. 

All such materials may not be used to supplement, explain, or contradict the terms of this Agreement. 

23. Severability. If any of these conditions or any part thereof purports to exclude or restrict or limit any liability and 

such exclusion or restriction or limitation is prohibited or rendered void or unenforceable by any legislation to which 

it is subject, or is itself prohibited or rendered void or unenforceable by any legislation to which it is subject, then the 

exclusion restriction or limitation on the condition or part thereof in question shall be so prohibited or rendered void or 

unenforceable and the validity or enforceability of any other part of these provisions shall not thereby be affected. 

24. Governing Law/Limitation on Actions. The terms, conditions, rights, and obligations under this Agreement shall 

be construed under the laws of the State of New York, without regard to principles of conflicts of laws. No actions 

arising out of the sale of the items sold hereunder or this Agreement may be brought by the Buyer more than two 

(2) years after such cause of action accrues.

John Guest Companies 

John Guest Ltd. 

Horton Road, West Drayton, Middlesex, UB7 8JL, England. 

Tel: (44) (1) (895) 449233 Fax: (44) (1) (895) 420321 

John Guest France S.A. 

143-147 Avenue Charles Floquet, Parc Gustave Eiffel, 

93593 Le Blanc Mesnil, Cedex, FRANCE. 

Tel: (33) (1) 48 65 52 29 Fax: (33) (1) 48 65 43 40 

John Guest USA, a world-leading supplier of Fluid 

System Products, located in Northern New Jersey 

is part of a progressive and professional organization 

with multiple locations worldwide. For over 30 years 

the John Guest organization has built its reputation by 

providing high quality products and high levels of 

customer service. 

Through a strong commitment to growth and innovation, 

John Guest USA will continue to serve its community 

and customers well into the future. 

John Guest USA, Inc. distributes its products across 

North, Central, and South America, the Caribbean, 

and the US Virgin Islands. 

John Guest USA Inc. 

180 Passaic Avenue 

PO Box 11085 

Fairfield, NJ 07004 

Tel: 973-808-5600 

Toll Free: 1-800-94-JG USA 

Fax: 973-808-5036 

Toll Free Fax: 1-877-77-JG FAX 

Web: www.johnguest.com 

Email: info@jgusa.com 

John Guest GmbH 

Ludwig-Erhard-Allee 30, D-33719 Bielefeld, GERMANY 

Tel: (49) (521) 972 560 Fax: (49) (521) 972 5680 

John Guest Czech s.r.o. 

Vrbenska 2290, CZ - 37001 Ceske ˇ Budejovice, ˇCZECH REPUBLIC. 

Tel: (420) (387) 002 040 Fax: (420) (387) 002 048 

John Guest Polska Sp. z.o.o. 

Ul. Starolecka 7, 61-361, Poznan, POLAND. 

Tel: (48) (61) 87 80 408 Fax: (48) (61) 87 80 285 

John Guest s.r.l. 

Via Vicenzo Lancia 13, 10038 Casabianca-Verolengo (Torino), ITALY. 

Tel: (39) (011) 957 5880 Fax: (39) (011) 957 6144 

John Guest s.l. 

C/ de La Electronica No.7, Poligono Industrial La Ferreria, 

Montcada i Reixac, 08110 Barcelona, SPAIN. 

Tel: (34) (93) 575 0027 Fax: (34) (93) 575 0178 

John Guest Korea Ltd 

Unit 552-27 Kajwa Dong, Seo Ku, 

Incheon City, 404-812 Korea. 

Tel: (82) (32) 584 3370 Fax: (82) (32) 584 3372 

John Guest Pacific Ltd 

P.O. Box 19553, 606 Rosebank Road, Avondale, 

Auckland, NEW ZEALAND. 

Tel: (64) (9) 8281353 Fax: (64) (9) 828 5927 

John Guest Pacific Ltd 

Unit 6, 33 Nyrang Street, Lidcombe, Sydney 

N.S.W. 2141, AUSTRALIA. 

Tel: (61) (2) 9737 9088 Fax: (61) (2) 9737 9122 

APPROVED MATERIALS 

NSF 51 

NSF 61 

and are registered trademarks of John Guest International Limited © Copyright 2008.

John Guest Fluid Products Catalog - Chester Paul Company

Create successful ePaper yourself

Delete template?

Save as template?